ColorFabb BrassFill 2.85mm PLA/PHA + Brass

ColorFabb BrassFill 2.85mm PLA/PHA + Brass Powder
Product Description
$79.95

ColorFabb Brassfill 

The material is still in beta, which means we’re still working on the formulation to get the best possible performance. Our current formulation is providing excellent results on 1.75mm direct drive printers, such as the Makerbot Replicator 2 and Prusa I3.

The filament is slightly softer than bronzeFill and copperFill, users need to be careful when applying pressure onto the filament. We’ve found that 3D printers using a bowden tube set-up and 2.85mm filament gives the least reliable results. Users need to take extra care of not over stressing the filament, with pressure and retraction settings.

Like copperFill and bronzeFill, the brassFill filament can be post processed. A unique quality of brassFill is the lovely golden shine it shows when polished to perfection.

Material: Brassfill
Product vendor: ColorFabb
Color: Brass
Effective Diameter: 2.85 mm +/- 0.05 mm
Quantity: 750 gr.
Density: x.yy g·cm-3

Print temp: 195°C - 220°C
Nozzle: any size
Print speed: 40mm/s to 100mm/s
Retraction: Check your printer documentation!
Hot print bed: 50°C - 60°C
Cold print bed: Yes, stick to Kapton Tape, 3M #2090 Blue Painter's tape, Heated glass, etc.
Post processing: Sanding and polishing.