The Prusa Pro HT90 is a delta kinematics 3D printer with a cylindrical print area (Ø300 × 400 mm). It is specifically designed to maximize the potential of advanced materials like ABS, ASA, PCCF and PA. Its heated chamber, which reaches up to 90 °C, and innovative cooling system, provide unparalleled layer adhesion and print quality.

With the HT90, you can print large objects without any warping, poor overhangs, or layer delamination. Additionally, the Input Shaper technology enables ultra-fast printing prototypes from PLA, PETG, and similar materials, all of them easily printable even with a closed chamber.

Equipped with a swappable print head featuring a high-temperature nozzle capable of reaching 500 °C, the HT90 also handles demanding materials like PEEK, PEKK, PPS, PSU, PES, PEI (Ultem) for small to medium-sized objects. This makes it the most affordable 3D printer for high-performance filaments. The built-in recirculation loop constantly purifies the air inside the chamber through a HEPA filter. Both the High-Flow and High-Temperature print heads are included in the package.

The printer is easy to set up and configure, offering both a fully-featured offline operation for maximum security and a robust online print management system.

Video

Features

Ultra-fast Industrial printer	Ø300 × 400 mm Build volume	Nozzle temperature Up to 500 °C	Bed temperature Up to 155 °C
Actively Heated Chamber	HEPA and carbon Filter	Offline and online Operation

Get the most out of your materials

The HT90 is engineered to maximize the potential of materials like ABS, ASA, PA, PCCF, Flex, and more. Its 90 °C heated chamber provides unparalleled layer adhesion and print quality, enabling easy production of large objects without warping or layer delamination. The innovative servo flap redirects airflow to precise areas of the model within milliseconds, allowing the HT90 to print flawless overhangs with minimal supports without overcooling the printed object.

The most Affordable Printer for High-end Filaments

The high-temperature print head, high-performance heatbed, and actively heated chamber make the HT90 the most affordable 3D printer capable of handling high-end materials. Print small-to-mid-sized objects from such filaments as PEEK, PEKK, PPS, PSU, PES, and even PEI (Ultem), a material extensively used in the aerospace industry.

From Aerospace to Medical

Thanks to its ability to handle a vast array of materials, the Prusa PRO HT90 is the go-to choice for many different industries. Print engine parts and coolers, medical implants and functional parts of machinery, valves, pipes, chemically-resistant components, durable heat- and cold-resistant parts and much more. No project is too demanding for the HT90.

Innovative Rapid Cooling Solution

The unique air management system is designed for real-time airflow control and optimal print quality with all materials. The print fan is on the side of the printer, forcing air through a tube directly into the lightweight print head, while the high-speed flap redirects its flow within milliseconds, faster than any normal cooling fan can do. This enables vastly improved printing of overhangs while the layers in the rest of the print do not suffer from overcooling.

Additionally, a closed-loop air recirculation system with a HEPA filter keeps the chamber free of ultra-fine particles, while an automatic intake flap manages temperatures for materials like PLA and PETG, so you can print them with the chamber closed. The key components are placed outside the heated chamber, prolonging their lifespan.

Large and Precise

Achieve unparalleled precision with the Prusa PRO HT90! We have tuned the print profiles so that you can design precise parts and work with great accuracy. The print volume is a full cylinder with a 300mm diameter and 400 mm tall Z-axis. The printer has a small footprint that is further enhanced by a vertically sliding door to save more space.

Swappable Print Heads

The print head is held in place using magnets. Simply detach it from the arms, disconnect the cable from the top of the printer and replace it with a different model. The High-Flow Print Head with a quick-swap 0.4mm Revo nozzle is the perfect choice for rapid prototyping with materials up to 300 °C. In contrast, the High-Temp head with an abrasive-resistant quick-swap 0.6mm Revo nozzle reaches up to 500 °C and enables printing with materials such as PEEK, PEKK, or PEI (Ultem). Both print heads are included with the HT90 and the hardware is compatible with all Revo nozzles with diameters from 0.25 - 0.8 mm.

Actively Heated Chamber with HEPA Filter

The printer’s actively heated chamber with a closed HEPA and carbon filter recirculation loop can reach up to 90 °C, providing an optimal environment for even the most demanding materials. Print large robust objects from ABS/ASA without negative side effects, such as warping or layer separation, use PLA for quick prototyping, and create durable objects from PEEK or PEI.

High Speed, Great Print Quality

The HT90 delivers smooth, dimensionally precise prints without typical artifacts present on CoreXY or cartesian 3D printers. This is because the movement of the direct-drive extruder is controlled by a coordinated shift of three lightweight arms, while the printed objects remain stationary. Equipped with Klipper firmware and Input Shaper technology, the HT90 achieves ultra-fast speeds while maintaining top print quality across the entire cylindrical print area.

Always-perfect First Layer

Three high-precision Loadcell sensors measure the distance between the nozzle and the print sheet with exceptional accuracy. This enables the printer to automatically achieve an absolutely pristine first layer, no matter which print surface you choose, without any need for manual adjustment. Phase Stepping video explanation!

Easy setup, Automatic calibration

Once you unpack the HT90, you can start printing in mere minutes. The entire preparation process is fast and accompanied by easy-to-follow instructions. Everything is controlled using a large 7’’ touchscreen. Finish the automatic calibration, load a filament of your choice, and start printing!

Maximum Security with Offline Mode

We understand the importance of security in industrial applications. While the HT90 offers a comprehensive remote print management system and surveillance, the printer is fully prepared for a completely offline operation. You can even disconnect the Wi-Fi module from the printer. We do not collect information about your prints or your printer’s surroundings. No matter whether you’re developing a new-generation space shuttle or just printing tools for your workshop, no organization should be interested in this information.

Robust Remote Management System

You can access two fully-featured remote print management systems depending on your requirements. The HT90 offers both local and remote management modes - in the local mode, the printer can be reached only from the local area networks, but you can also add it into Prusa Connect, our secure remote print management system, so you can access it from anywhere. Furthermore, you can take advantage of the built-in camera for print monitoring and chamber lighting. Attaching an external USB camera is also possible. Original Prusa Enclosure.

Specs

Measurements
Build Volume	Ø300 × 400 mm
Filament diameter	1.75 mm
Layer height	0.05-0.30 mm
Printer dimensions
Width	530 mm (without the filament holder)
Depth	530 mm
Height	1050 mm (1470 mm with the door opened)
Electronics
Mainboard	32-bit Duet control board
Software	Klipper control system, Input Shaper, Pressure Advance
Connectivity	Ethernet (RJ45), detachable Wi-Fi module, offline operation available
Surveillance	Built-in integrated camera and chamber lighting
Extruder>
Extruder	Swappable direct-drive print heads, quick-swap Revo nozzles 0.25 to 0.8mm diameter, 1.75mm filament compatible
Nozzle compatibility	All Revo nozzles are hardware compatible. Note that some Revo nozzles are not supported and may require creating a custom slicer profile.
Maximum filament flow	40 mm³/s (ABS and 0.8mm nozzle)
Maximum speed	600 mm/s
Maximum print speed	250 mm/s
Acceleration	20000 mm/s²
Max temperatures
Operating temperature range	20 °C - 32 °C
Maximal air humidity	85 %, non-condensing
Max bed temperature	155 °C
Max chamber temperature	up to 90 °C
Max nozzle temperature	300 °C/500 °C
Cooling
Cooling	Servo-operated high-speed flap for immediate airflow changes, high-pressure turbine
Supported materials
High Temp Print head	PEI (Ultem), PEEK, PEKK, PPSU, PSU, PPS, PES and more.
High Flow Print head	PLA, ASA, PETG, FLEX (TPU, TPE), ABS, PA, PC, PCCF, and more
Power
Power supply	110V 15A / 230V 10A 50/60Hz
Calibration
Calibration	Always-perfect first layer with Loadcell sensor, fully automatic calibration
Print surface
Print pads	Textured PEI steel sheet, PA steel sheet optionally available

What's in the box?

Prusa PRO HT90 3D Printer
Power cable
Textured Powder-coated Print Sheet
Wi-Fi adapter
USB drive with sample print files
Prusament ASA Jet Black 850g
Alcohol-saturated wipes
Side cutters
High-flow print head
High-temperature print head
High-temperature nozzle exchange tool
3D Printing Handbook
PTFE Lubricant
Spare parts
Filament holder
Brass nozzle brush

Produits

Bambu Lab H2D Pro 3D Printer

Bambu Lab X1E Combo with AMS

Prusa Pro HT90

Site Map

Rester en contact