Dental LT Clear Resin V2 is a long-term biocompatible material for directly printing affordable, high-quality hard splints and occlusal guards in-house. Highly durable and resistant to fracture, this color-corrected material prints clear, polishes to high optical transparency, and resists discoloration over time.

Read our Application Guide to learn the complete workflow and best practices for making 3D printed splints and night guards on your Formlabs 3D printer.

Why Choose Dental LT Clear Resin (V2)?
Dental LT Clear Resin (V2) provides dental professionals with a durable, color-corrected material for the convenient production of long-lasting and hard occlusal splints.

High Performance
Provide fracture-resistant, durable and long-lasting bite splints to patients.

Aesthetic
Polish splints to high optical transparency, aiding in patient acceptance.

Accurate and Consistent
Run a lean and profitable workflow with consistent production of aligners.

Biocompatibility
Provide the patient and clinician the peace of mind they deserve.

Applications
Dental LT Clear Resin (V2) is Formlabs’ second-generation, long-term biocompatible material for clear bite splints.

Consider Dental LT Clear Resin (V2) for:

Splints
Occlusal Guards
Night Guards

Material Properties* Dental LT Clear Resin (V2)

Ultimate Tensile Strength: 52 MPa
Tensile Modulus: 2080 MPa
Elongation: 12%
Flexural Modulus: 2.3 GPa
Impact Strength (Unnotched IZOD): 449 J/m
Hardness Shore D: 78D

* Material properties may vary based on part geometry, print orientation, print settings, and temperature. Data were measured on post-cured samples printed on a Form 3B printer with 100 µm Dental LT Clear Resin (V2) settings, washed in a Form Wash for 20 minutes in 99% Isopropyl Alcohol, and post-cured at 60°C for 60 minutes in a Form Cure.

Produits

Form 2 & 3 Dental LT Clear Resin V2 1L

Site Map

Rester en contact