Fiberon™ PETG-ESD offers electrostatic discharge (ESD) safety with improved toughness making it a good candidate for applications in electronics industry.

NOTE: Fiberon™ PETG-ESD is compounded with carbon nano-tubes:
Here is a research regarding ABS compounded with carbon nano-tubes.

Print settings

Printing Temperature: 250˚C - 290˚C
Bed Temperature: 70˚C - 80˚C
Printing Speed: up to 500mm.s
Fan: OFF

Direct Drive:
Retraction Distance: 1mm
Retraction Speed: 20mm/s
Indirect Drive:
Retraction Distance: 3mm
Retraction Speed: 40mm/s

Drying Settings: 65˚C for 3h
PolyDryer™: Level 3 for 6h (PolyDryer™)
(Only if the material has absorbed moisture)

Printer Profiles:

Bambu Lab

QIDI Tech

Raise3D

Can't find your profile? Join our Discord and see if the community has made one already!

Printing Requirements

All-metal hotend 250˚C+ recommended

REACH | RoHS | 889 | PCP | ISO9001 CERT

FAQ

How long will PETG-ESD remain ESD safe?

The ESD (Electrostatic Discharge) safety of PETG-ESD filament can degrade over time, depending on environmental factors like humidity, temperature, and exposure to dust or contaminants. PETG-ESD filaments contain conductive additives, which can wear off or lose effectiveness due to surface abrasion or environmental wear. Typically, the ESD-safe properties should remain intact for 1-2 years under controlled conditions, but regular testing is recommended to ensure continued ESD performance. Storing parts in a clean, dry environment can help maintain their ESD properties longer.

Do you have any further data?

You can find some Surface Resistivity test results HERE

Will the spools work in an AMS?

Yes! We have redesigned the edges of our spools so all Polymaker products will now spin great in the AMS.

That said - you will need to be careful when using any abrasive materials in the AMS.

What is the difference between PET and PETG?

PET and PETG differ in their chemical structure, properties, printability, and applications. PETG is more flexible, easier to print, and suitable for 3D printing and medical applications, while PET is more durable and suitable for applications requiring thermal resistance.

Produits

Form 2 & 3 ESD Resin 1L

Polymaker Fiberon PETG-ESD 1.75mm 500g

Site Map

Rester en contact