Livraison gratuite sur commandes en ligne de $200 et plus. / Free shipping for online orders over $200.
{"id":15527239123180,"title":"Bambu Lab H3C 3D Printer","handle":"bambu-lab-h3c-3d-printer","description":"\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003eThe Bambu Lab H3C is a next-generation tool-changer 3D printer designed for effortless, high-speed multi-material printing. It features an integrated filament management system with 9 independent PrintTools, allowing for 6-second material swaps with minimal purge and full support for advanced filaments ranging from rigid engineering-grade materials to ultra-soft TPU.\u003c\/p\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003ch2\u003eBambu Lab H3C\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eSwaptek™ - 6-Second Print-to-Print Material Switch\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eNine PrintTools, each with its own dedicated filament path and heater, keep every material loaded, preheated, and ready to print. No need to retract one filament before loading another. With an optimized design, fine-tuned parameters, and active preheating, switching between PrintTools takes as little as 6 seconds.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eActive Pre-Heat\u003c\/h4\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eHeating a nozzle usually means waiting. Active Pre-Heat looks ahead to the next tool change and warms the incoming nozzle while the current one is still printing - so the new material starts laying down within 6 seconds.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eFlexFeed Extruder\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eSoft TPU, up to 3x faster - without jams. Printing soft TPU has traditionally been slow because flexible filament can buckle before reaching the nozzle, limiting extrusion speed. FlexFeed supports both 1.75 mm and 2.85 mm filament, with dedicated 2.85 mm TPU providing greater resistance to buckling and higher volumetric flow. The result: reliable printing with TPU as soft as 75A at up to 3x the flow rate of traditional printers. A cam-driven mechanism, powered by a PMSM motor, keeps tension precise and consistent - so every extrusion stays rock-solid.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eMixed Nozzle Sizes\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eSpeed where you want it. Detail where it matters. Fine details call for a 0.2 mm nozzle, structural parts are better suited to 0.4 mm, and soft TPU parts require a dedicated TPU nozzle. H3C can carry different nozzle sizes at once. Paired with Bambu Studio's new mixed-diameter toolpath planning algorithm, each nozzle prints at a layer height that suits it and plays to its strengths, without having to share a single layer height.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eRetractable Rack\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIt's all about curiosity. Watching a print come to life is part of the magic of 3D printing. That's why the rack retracts out of view, giving you a clear look inside the chamber. Pull up a chair, watch the first layer take shape, and enjoy the process.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eMore Than 3D Printing (Optional)\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003ePrint. Cut. Draw. Deboss. All in one machine, all on its own. Swaptek isn't limited to PrintTools. Optional CutTool, DrawTool, DebossTool - and more - mount the same way and switch automatically. Multi-process projects no longer mean multiple machines, manual swaps, or repeated setups. One job, every process, hands off.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eAMS 3H - Filament Management Built For Tool Changer\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eA fully enclosed, integrated filament management system built for Swaptek™: every roll stays sealed against moisture and feeds automatically into the PrintTool. A built-in 2-slot dryer takes extra care of the most hygroscopic filaments - PA, PET, and TPU.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eAuto Filament Loader\u003c\/h4\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eNo guesswork on loading. Drop a filament into any of the nine slots and the AMS 3H detects, routes, and engages it with the PrintTool automatically - across all 9 paths.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eBuilt-In Dryer\u003c\/h4\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eA dedicated 2-slot dryer sits right in the filament slots and works with Swaptek™ - drying on demand or mid-print, so prep never stalls production. It reaches 85°C, enough for engineering-grade PA, PC, and carbon-fiber-filled filaments.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eAuxiliary AMS\u003c\/h4\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eNine materials, with room for more. Most toolchangers limit the number of materials to their available tools. The H3C goes further. Connect existing Bambu Lab AMS units through PrintTool No. 1 to support up to 24 filament spools, unlocking more colors and materials in a single print without changing your workflow.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eIntegrated Design\u003c\/h4\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eFilament storage, built in - not hanging off. No spools hanging off the side, no dryer taking up valuable workspace. The H3C integrates filament storage and drying into a clean, compact design, maintaining a footprint comparable to a single-nozzle printer.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eFlagship Performance. No Compromise.\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eBehind the H3C's advanced multi-material capabilities is a foundation engineered for precision and performance. Cross-flow cooling delivers cleaner overhangs, a 65°C heated chamber helps minimize warping with engineering-grade materials, and an advanced motion system maintains fine detail even at high speeds. Complex prints demand more from your printer. The H3C is built to deliver.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eMotion System Upgrade\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eLighter head. Faster prints. Same precision. The toolhead and X-axis assembly are 40% lighter, reducing inertia for faster, more precise movement. With acceleration reaching 25,000 mm\/s² and travel speeds up to 1,400 mm\/s, the H3C delivers exceptional speed while minimizing vibrations and ringing that can affect print quality.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eVision Encoder (Optional)\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e50 μm motion accuracy, held for years, not weeks. For projects where precision matters, from engineering components to production runs, the optional Vision Encoder helps maintain accuracy over time. By providing an absolute optical reference, it enables recalibration to compensate for mechanical wear and drift, restoring motion accuracy to under 50 μm across the build volume.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eCross-Flow Cooling\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCooled at every level. Print clean, even in summer. The H3C features four layers of cooling working together. A CFD-optimized part cooling fan and dual auxiliary fans help maintain clean overhangs and bridges, even at high speeds. A dedicated PrintTool fan maintains thermal stability during extended printing and frequent PrintTool changes, while a chamber fan draws in cooler air to help regulate internal temperatures.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e350°C Nozzle \u0026amp; Active Chamber Heating\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eEngineered for high temperatures, from nozzle to chamber. Engineering-grade filaments demand precise temperature control. The H3C delivers with active dual-zone chamber heating up to 65°C, helping maintain consistent temperatures and minimize warping. All nine hardened-steel nozzles reach up to 350°C, supporting demanding materials such as ABS, PC, PA-CF, PET-CF, and more.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eFull-Auto Calibration\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eNine tools, calibrated automatically - every time. With nine PrintTools working together, precision is essential. The H3C automatically handles PrintTool docking calibration, offset compensation for accurate color and material alignment, and bed leveling before every print. No manual adjustments needed.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eAI Monitoring\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIt watches, so you don't have to. A full array of vision systems watches from before the first layer to the last. Up front, the H3C checks the chamber against your slicer setup and flags mismatches while they're easy to fix. Then its AI catches spaghetti, purge-bin jams, and clogs before they cascade. Check in whenever you like.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eAll-New HMS With MiniWiki\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eFind the fix, right on your screen. The new HMS doesn't just throw an error code at you. It diagnoses the actual cause - narrowing it down, ranking the possibilities, and explaining what each one means in plain language. Then MiniWiki walks you through the fix, right on the printer's screen. No QR codes. No phones. No flipping between the machine and a help page. Most issues resolved before your coffee gets cold.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eOfficial Accessories\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMade to fit your space. A 3D printer shouldn't take over your space - it should fit into it. Bambu Lab's official accessories make the H3C feel like a natural part of your workspace.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eBambu Station L\u003c\/h4\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eLift it up. Tidy it up. Bambu Station L lifts the H3C to a comfortable working height - easier loading, maintenance, and monitoring, no stooping. Underneath, dedicated storage keeps tools, spare filament, and essentials right where you reach for them.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eBambu Lab E1 Air Purifier\u003c\/h4\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eClean air. No compromises. Working next to a printer shouldn't mean breathing what it makes. The Bambu Lab E1 pairs with your H3C and kicks in filtration the moment a print starts - capturing VOCs and harmful gases, PM2.5 and ultrafine particles, and microplastics released during printing.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003cthead class=\"voxel-product-description-table-head\"\u003e\n\u003ctr\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003eParameter\u003c\/th\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\" colspan=\"2\"\u003e\u003cstrong\u003ePrinting Technology\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eType\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eFused Filament Fabrication\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\" colspan=\"2\"\u003e\u003cstrong\u003eBody\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eBuild Volume (L x W x H)\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e330*320*325 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eEnclosure Type\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eEnclosed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eHotend Switching System\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eBambu Lab SwapTek™ 9-Tool Switching\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eChassis\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eOuter Frame\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\" colspan=\"2\"\u003e\u003cstrong\u003eDimensions And Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePackage Dimensions\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e600*630*700 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eProduct Dimensions\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e493*571*587 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eRecommended Installation Space\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e593*1056*1306 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eNet Weight\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e36.28 kg (including the AMS 3H)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\" colspan=\"2\"\u003e\u003cstrong\u003eToolhead\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eExtruder Gear\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eHardened Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eIncluded Nozzle Material\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eHardened Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eMax Nozzle Temperature\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e350 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eIncluded Nozzle Diameter\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e0.4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSupported Nozzle Diameter\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eFilament Cutter\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eBuilt into the PrintTool\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eExpansion Options\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSupports the CraftTool (CutTool, DrawTool, and more coming)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSupported Filament Diameter\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e1.75 mm, 2.85 mm (Bypass feed only)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eExtruder Motor\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eBambu Lab high-precision brushless servo motor with planetary gearbox\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\" colspan=\"2\"\u003e\u003cstrong\u003eHeatbed\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eBuild Plate Material\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eFlexible Steel Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eIncluded Build Plate Type\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eTextured PEI Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSupported Build Plate Type\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eTextured PEI Plate, Cool Plate SuperTack, Engineering Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eMax Heatbed Temperature\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e120 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\" colspan=\"2\"\u003e\u003cstrong\u003eSpeed\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eMax Speed Of Toolhead\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e1,400 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eMax Acceleration Of Toolhead\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e25,000 mm\/s²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eMax Flow For Hotend\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e40 mm³\/s (Test parameters: 250 mm round model with a single outer wall; Bambu Lab ABS; 280 °C printing temperature)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\" colspan=\"2\"\u003e\u003cstrong\u003eChamber Temperature Control\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eActive Chamber Heating\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSupported\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eMax Temperature\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e65 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\" colspan=\"2\"\u003e\u003cstrong\u003eAir Purification\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eHEPA Filter Grade\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eH11\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eActivated Carbon Filter Type\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eGranulated Coconut Shell\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eVOC Filtration\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eExcellent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eParticulate Matter Filtration\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSupported\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\" colspan=\"2\"\u003e\u003cstrong\u003eCooling\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePart Cooling Fan\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eClosed Loop Control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eHotend Cooling Fan\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eClosed Loop Control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eMain Control Board Fan\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eClosed Loop Control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eChamber Heat Circulation Fan\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eClosed Loop Control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eAuxiliary Part Cooling Fan\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eClosed Loop Control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eExhaust Fan\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eClosed Loop Control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\" colspan=\"2\"\u003e\u003cstrong\u003eFilaments Supported\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePLA, PETG, PCTG, TPU, EVA, PE, PP, PHA\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSupported\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePVA, BVOH, support filament\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSupported\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eCarbon\/glass fiber reinforced: PLA, PETG\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSupported\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eABS, ASA, HIPS, PA, PAHT, PC, PET, PPA, PPS\u003cbr\u003eCarbon\/glass fiber reinforced: ABS, ASA, HIPS, PA, PAHT, PC, PET, PPA, PPS\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSupported\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eFilament Drying\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSupported\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\" colspan=\"2\"\u003e\u003cstrong\u003eSensor\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eLive View Camera\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eBuilt-in; 1920*1080\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eToolhead Camera\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eBuilt-in; 1920*1080\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eBirdsEye Camera\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eOptional; 3264*2448\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eDoor Sensor\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSupported\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eFilament Run Out Sensor\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSupported\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eNozzle Clumping Sensor\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSupported\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eFilament Odometry\u003csup\u003e1)\u003c\/sup\u003e\n\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSupported\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePower Loss Recovery\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSupported\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\" colspan=\"2\"\u003e\u003cstrong\u003eElectrical Requirements\u003csup\u003e2)\u003c\/sup\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eVoltage\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eHigh-voltage version: 200-240 VAC, 50\/60 Hz\u003cbr\u003eLow-voltage version: 100-120 VAC, 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eMax Power\u003csup\u003e3)\u003c\/sup\u003e\n\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eHigh-voltage version: 2250 W @ 220 V\u003cbr\u003eLow-voltage version: 1850 W @ 110 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eStandby Power\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eWi-Fi disconnected: 11.7-12.2 W\u003cbr\u003eWi-Fi connected: 12.2-12.7 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSteady-State Power\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eHigh-voltage version:\u003cbr\u003ePLA (25°C): 240 W @ 220 V\u003cbr\u003ePC (25°C): 540 W @ 220 V\u003cbr\u003eLow-voltage version:\u003cbr\u003ePLA (25°C): 240 W @ 110 V\u003cbr\u003ePC (25°C): 540 W @ 110 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eLow Power Mode\u003csup\u003e4)\u003c\/sup\u003e\n\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e1050 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\" colspan=\"2\"\u003e\u003cstrong\u003eEnvironmental Requirements\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e10 °C - 30 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\" colspan=\"2\"\u003e\u003cstrong\u003eElectronics\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eTouchscreen\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e5-inch 854*480 touchscreen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eStorage\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eBuilt-in 64 GB EMMC and USB port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eControl Interfaces\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eTouchscreen, mobile App, PC App\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eMotion Controller\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSingle-core Cortex-M4 and single-core Cortex-M7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eApplication Processor\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eQuad-core ARM with dedicated NPU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\" colspan=\"2\"\u003e\u003cstrong\u003eSoftware\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSlicer\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eBambu Studio\u003cbr\u003eSupports third-party slicers which export standard G-code, such as Super Slicer, PrusaSlicer and Cura, but certain advanced features may not be supported.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\" colspan=\"2\"\u003e\u003cstrong\u003eNetwork Control\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eEthernet\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eNot available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eWireless Network\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eWi-Fi 6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eNetwork Kill Switch\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eNot available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eRemovable Network Module\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eNot available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e802.1X Network Access Control\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eNot available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\" colspan=\"2\"\u003e\u003cstrong\u003eWi-Fi\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eOperating Frequency\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e2412 - 2472 MHz, 5150 - 5850 MHz (FCC\/CE)\u003cbr\u003e2400 - 2483.5 MHz, 5150 - 5850 MHz (SRRC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eWi-Fi Transmitter Power (EIRP)\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e2.4 GHz: \u0026lt;23 dBm (FCC); \u0026lt;20 dBm (CE\/SRRC\/MIC)\u003cbr\u003e5 GHz Band1\/2: \u0026lt;23 dBm (FCC\/CE\/SRRC\/MIC)\u003cbr\u003e5 GHz Band3: \u0026lt;30 dBm (CE); \u0026lt;24 dBm (FCC)\u003cbr\u003e5 GHz Band4: \u0026lt;23 dBm (FCC\/SRRC); \u0026lt;14 dBm (CE)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eWi-Fi Protocol\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eIEEE 802.11 a\/b\/g\/n\/ac\/ax\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e1) For Bambu Lab filament, the initial weight can be read automatically through RFID or entered manually. For third-party filament, enter the initial weight manually.\u003cbr\u003e2) The printer's voltage specifications vary by sales region. Before use, please check the label next to the power socket on the printer to ensure the supplied voltage matches the indicated voltage.\u003cbr\u003e3) To quickly heat the heatbed to the required temperature, the printer will run at maximum power for about 3-5 minutes.\u003cbr\u003e4) If the circuit has limited power capacity, you can enable Low Power Mode. After it is enabled, the total energy use remains unchanged, and the heatbed and chamber will heat up more slowly.\u003c\/p\u003e\n\u003ch5\u003eWhat's In The Box\u003c\/h5\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003cthead class=\"voxel-product-description-table-head\"\u003e\n\u003ctr\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003e\u003c\/th\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003e\u003c\/th\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003eH3C Combo\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cimg alt=\"Bambu Lab H3C\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/Bambu_Lab_H3C.png?v=1793739214\" style=\"width: 60px; height: 60px; object-fit: contain;\"\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eBambu Lab H3C\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e✓\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cimg alt=\"Bambu Lab AMS 3H\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/Bambu_Lab_AMS_3H.png?v=1793739299\" style=\"width: 60px; height: 60px; object-fit: contain;\"\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eBambu Lab AMS 3H\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e✓\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cimg alt=\"Printer Power Cord\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/Printer_Power_Cord.png?v=1793739311\" style=\"width: 60px; height: 60px; object-fit: contain;\"\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePrinter Power Cord\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e✓\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cimg alt=\"Dryer Module Power Cord\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/Dryer_Module_Power_Cord.png?v=1793739315\" style=\"width: 60px; height: 60px; object-fit: contain;\"\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eDryer Module Power Cord\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e✓\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cimg alt=\"Bambu Bus Cable 6-pin\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/Bambu_Bus_Cable_6-pin.png?v=1793739321\" style=\"width: 60px; height: 60px; object-fit: contain;\"\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eBambu Bus Cable 6-pin\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e✓\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cimg alt=\"Textured PEI Build Plate\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/Textured_PEI_Build_Plate.png?v=1793739328\" style=\"width: 60px; height: 60px; object-fit: contain;\"\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eTextured PEI Build Plate\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e✓\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cimg alt=\"0.4mm PrintTool\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/261.png?v=1793739332\" style=\"width: 60px; height: 60px; object-fit: contain;\"\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e0.4mm PrintTool\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cimg alt=\"0.4mm PrintTool (for 2.85mm filament)\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/20261102-105605.png?v=1793739337\" style=\"width: 60px; height: 60px; object-fit: contain;\"\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e0.4mm PrintTool (for 2.85mm filament)\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cimg alt=\"Accessories Box\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/Accessories_Box.png?v=1793739344\" style=\"width: 60px; height: 60px; object-fit: contain;\"\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eAccessories Box\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e✓\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","published_at":"2026-11-03T11:45:53-05:00","created_at":"2026-11-03T11:22:17-05:00","vendor":"Bambu Lab","type":"Bambu Lab 3D Printers","tags":["1.75mm","2.85mm for TPU75A","FreeShippingExcluded"],"price":349900,"price_min":349900,"price_max":349900,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":68056832049388,"title":"H3C AMS Combo","option1":"H3C AMS Combo","option2":null,"option3":null,"sku":"BBL-3DP-H3C-CMB-000","requires_shipping":true,"taxable":true,"featured_image":{"id":48484694425836,"product_id":15527239123180,"position":1,"created_at":"2026-11-03T11:31:15-05:00","updated_at":"2026-11-03T11:31:16-05:00","alt":"Bambu Lab H3C AMS Combo","width":1400,"height":1050,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_H3C_AMS_Combo_product_picture_a5978e82-0a2d-43ae-b08a-bd51449e80de.webp?v=1793723476","variant_ids":[68056832049388]},"available":false,"name":"Bambu Lab H3C 3D Printer - H3C AMS Combo","public_title":"H3C AMS Combo","options":["H3C AMS Combo"],"price":349900,"weight":42100,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"featured_media":{"alt":"Bambu Lab H3C AMS Combo","id":46697272541420,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_H3C_AMS_Combo_product_picture_a5978e82-0a2d-43ae-b08a-bd51449e80de.webp?v=1793723476"}},"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_H3C_AMS_Combo_product_picture_a5978e82-0a2d-43ae-b08a-bd51449e80de.webp?v=1793723476","\/\/www.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_H3C_AMS_Combo_From_Back_product_picture_80a59286-c4a7-486b-9258-d4b5f6c95839.webp?v=1793723476"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_H3C_AMS_Combo_product_picture_a5978e82-0a2d-43ae-b08a-bd51449e80de.webp?v=1793723476","options":["Imprimante 3D"],"media":[{"alt":"Bambu Lab H3C AMS Combo","id":46697272541420,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_H3C_AMS_Combo_product_picture_a5978e82-0a2d-43ae-b08a-bd51449e80de.webp?v=1793723476"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_H3C_AMS_Combo_product_picture_a5978e82-0a2d-43ae-b08a-bd51449e80de.webp?v=1793723476","width":1400},{"alt":"Bambu Lab H3C AMS Combo From Back","id":46697272508652,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_H3C_AMS_Combo_From_Back_product_picture_80a59286-c4a7-486b-9258-d4b5f6c95839.webp?v=1793723476"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_H3C_AMS_Combo_From_Back_product_picture_80a59286-c4a7-486b-9258-d4b5f6c95839.webp?v=1793723476","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003eThe Bambu Lab H3C is a next-generation tool-changer 3D printer designed for effortless, high-speed multi-material printing. It features an integrated filament management system with 9 independent PrintTools, allowing for 6-second material swaps with minimal purge and full support for advanced filaments ranging from rigid engineering-grade materials to ultra-soft TPU.\u003c\/p\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003ch2\u003eBambu Lab H3C\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eSwaptek™ - 6-Second Print-to-Print Material Switch\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eNine PrintTools, each with its own dedicated filament path and heater, keep every material loaded, preheated, and ready to print. No need to retract one filament before loading another. With an optimized design, fine-tuned parameters, and active preheating, switching between PrintTools takes as little as 6 seconds.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eActive Pre-Heat\u003c\/h4\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eHeating a nozzle usually means waiting. Active Pre-Heat looks ahead to the next tool change and warms the incoming nozzle while the current one is still printing - so the new material starts laying down within 6 seconds.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eFlexFeed Extruder\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eSoft TPU, up to 3x faster - without jams. Printing soft TPU has traditionally been slow because flexible filament can buckle before reaching the nozzle, limiting extrusion speed. FlexFeed supports both 1.75 mm and 2.85 mm filament, with dedicated 2.85 mm TPU providing greater resistance to buckling and higher volumetric flow. The result: reliable printing with TPU as soft as 75A at up to 3x the flow rate of traditional printers. A cam-driven mechanism, powered by a PMSM motor, keeps tension precise and consistent - so every extrusion stays rock-solid.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eMixed Nozzle Sizes\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eSpeed where you want it. Detail where it matters. Fine details call for a 0.2 mm nozzle, structural parts are better suited to 0.4 mm, and soft TPU parts require a dedicated TPU nozzle. H3C can carry different nozzle sizes at once. Paired with Bambu Studio's new mixed-diameter toolpath planning algorithm, each nozzle prints at a layer height that suits it and plays to its strengths, without having to share a single layer height.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eRetractable Rack\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIt's all about curiosity. Watching a print come to life is part of the magic of 3D printing. That's why the rack retracts out of view, giving you a clear look inside the chamber. Pull up a chair, watch the first layer take shape, and enjoy the process.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eMore Than 3D Printing (Optional)\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003ePrint. Cut. Draw. Deboss. All in one machine, all on its own. Swaptek isn't limited to PrintTools. Optional CutTool, DrawTool, DebossTool - and more - mount the same way and switch automatically. Multi-process projects no longer mean multiple machines, manual swaps, or repeated setups. One job, every process, hands off.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eAMS 3H - Filament Management Built For Tool Changer\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eA fully enclosed, integrated filament management system built for Swaptek™: every roll stays sealed against moisture and feeds automatically into the PrintTool. A built-in 2-slot dryer takes extra care of the most hygroscopic filaments - PA, PET, and TPU.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eAuto Filament Loader\u003c\/h4\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eNo guesswork on loading. Drop a filament into any of the nine slots and the AMS 3H detects, routes, and engages it with the PrintTool automatically - across all 9 paths.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eBuilt-In Dryer\u003c\/h4\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eA dedicated 2-slot dryer sits right in the filament slots and works with Swaptek™ - drying on demand or mid-print, so prep never stalls production. It reaches 85°C, enough for engineering-grade PA, PC, and carbon-fiber-filled filaments.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eAuxiliary AMS\u003c\/h4\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eNine materials, with room for more. Most toolchangers limit the number of materials to their available tools. The H3C goes further. Connect existing Bambu Lab AMS units through PrintTool No. 1 to support up to 24 filament spools, unlocking more colors and materials in a single print without changing your workflow.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eIntegrated Design\u003c\/h4\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eFilament storage, built in - not hanging off. No spools hanging off the side, no dryer taking up valuable workspace. The H3C integrates filament storage and drying into a clean, compact design, maintaining a footprint comparable to a single-nozzle printer.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eFlagship Performance. No Compromise.\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eBehind the H3C's advanced multi-material capabilities is a foundation engineered for precision and performance. Cross-flow cooling delivers cleaner overhangs, a 65°C heated chamber helps minimize warping with engineering-grade materials, and an advanced motion system maintains fine detail even at high speeds. Complex prints demand more from your printer. The H3C is built to deliver.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eMotion System Upgrade\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eLighter head. Faster prints. Same precision. The toolhead and X-axis assembly are 40% lighter, reducing inertia for faster, more precise movement. With acceleration reaching 25,000 mm\/s² and travel speeds up to 1,400 mm\/s, the H3C delivers exceptional speed while minimizing vibrations and ringing that can affect print quality.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eVision Encoder (Optional)\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e50 μm motion accuracy, held for years, not weeks. For projects where precision matters, from engineering components to production runs, the optional Vision Encoder helps maintain accuracy over time. By providing an absolute optical reference, it enables recalibration to compensate for mechanical wear and drift, restoring motion accuracy to under 50 μm across the build volume.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eCross-Flow Cooling\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCooled at every level. Print clean, even in summer. The H3C features four layers of cooling working together. A CFD-optimized part cooling fan and dual auxiliary fans help maintain clean overhangs and bridges, even at high speeds. A dedicated PrintTool fan maintains thermal stability during extended printing and frequent PrintTool changes, while a chamber fan draws in cooler air to help regulate internal temperatures.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e350°C Nozzle \u0026amp; Active Chamber Heating\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eEngineered for high temperatures, from nozzle to chamber. Engineering-grade filaments demand precise temperature control. The H3C delivers with active dual-zone chamber heating up to 65°C, helping maintain consistent temperatures and minimize warping. All nine hardened-steel nozzles reach up to 350°C, supporting demanding materials such as ABS, PC, PA-CF, PET-CF, and more.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eFull-Auto Calibration\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eNine tools, calibrated automatically - every time. With nine PrintTools working together, precision is essential. The H3C automatically handles PrintTool docking calibration, offset compensation for accurate color and material alignment, and bed leveling before every print. No manual adjustments needed.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eAI Monitoring\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIt watches, so you don't have to. A full array of vision systems watches from before the first layer to the last. Up front, the H3C checks the chamber against your slicer setup and flags mismatches while they're easy to fix. Then its AI catches spaghetti, purge-bin jams, and clogs before they cascade. Check in whenever you like.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eAll-New HMS With MiniWiki\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eFind the fix, right on your screen. The new HMS doesn't just throw an error code at you. It diagnoses the actual cause - narrowing it down, ranking the possibilities, and explaining what each one means in plain language. Then MiniWiki walks you through the fix, right on the printer's screen. No QR codes. No phones. No flipping between the machine and a help page. Most issues resolved before your coffee gets cold.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eOfficial Accessories\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMade to fit your space. A 3D printer shouldn't take over your space - it should fit into it. Bambu Lab's official accessories make the H3C feel like a natural part of your workspace.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eBambu Station L\u003c\/h4\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eLift it up. Tidy it up. Bambu Station L lifts the H3C to a comfortable working height - easier loading, maintenance, and monitoring, no stooping. Underneath, dedicated storage keeps tools, spare filament, and essentials right where you reach for them.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eBambu Lab E1 Air Purifier\u003c\/h4\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eClean air. No compromises. Working next to a printer shouldn't mean breathing what it makes. The Bambu Lab E1 pairs with your H3C and kicks in filtration the moment a print starts - capturing VOCs and harmful gases, PM2.5 and ultrafine particles, and microplastics released during printing.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003cthead class=\"voxel-product-description-table-head\"\u003e\n\u003ctr\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003eParameter\u003c\/th\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\" colspan=\"2\"\u003e\u003cstrong\u003ePrinting Technology\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eType\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eFused Filament Fabrication\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\" colspan=\"2\"\u003e\u003cstrong\u003eBody\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eBuild Volume (L x W x H)\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e330*320*325 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eEnclosure Type\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eEnclosed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eHotend Switching System\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eBambu Lab SwapTek™ 9-Tool Switching\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eChassis\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eOuter Frame\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\" colspan=\"2\"\u003e\u003cstrong\u003eDimensions And Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePackage Dimensions\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e600*630*700 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eProduct Dimensions\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e493*571*587 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eRecommended Installation Space\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e593*1056*1306 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eNet Weight\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e36.28 kg (including the AMS 3H)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\" colspan=\"2\"\u003e\u003cstrong\u003eToolhead\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eExtruder Gear\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eHardened Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eIncluded Nozzle Material\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eHardened Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eMax Nozzle Temperature\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e350 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eIncluded Nozzle Diameter\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e0.4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSupported Nozzle Diameter\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eFilament Cutter\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eBuilt into the PrintTool\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eExpansion Options\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSupports the CraftTool (CutTool, DrawTool, and more coming)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSupported Filament Diameter\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e1.75 mm, 2.85 mm (Bypass feed only)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eExtruder Motor\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eBambu Lab high-precision brushless servo motor with planetary gearbox\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\" colspan=\"2\"\u003e\u003cstrong\u003eHeatbed\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eBuild Plate Material\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eFlexible Steel Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eIncluded Build Plate Type\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eTextured PEI Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSupported Build Plate Type\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eTextured PEI Plate, Cool Plate SuperTack, Engineering Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eMax Heatbed Temperature\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e120 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\" colspan=\"2\"\u003e\u003cstrong\u003eSpeed\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eMax Speed Of Toolhead\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e1,400 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eMax Acceleration Of Toolhead\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e25,000 mm\/s²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eMax Flow For Hotend\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e40 mm³\/s (Test parameters: 250 mm round model with a single outer wall; Bambu Lab ABS; 280 °C printing temperature)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\" colspan=\"2\"\u003e\u003cstrong\u003eChamber Temperature Control\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eActive Chamber Heating\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSupported\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eMax Temperature\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e65 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\" colspan=\"2\"\u003e\u003cstrong\u003eAir Purification\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eHEPA Filter Grade\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eH11\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eActivated Carbon Filter Type\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eGranulated Coconut Shell\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eVOC Filtration\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eExcellent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eParticulate Matter Filtration\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSupported\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\" colspan=\"2\"\u003e\u003cstrong\u003eCooling\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePart Cooling Fan\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eClosed Loop Control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eHotend Cooling Fan\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eClosed Loop Control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eMain Control Board Fan\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eClosed Loop Control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eChamber Heat Circulation Fan\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eClosed Loop Control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eAuxiliary Part Cooling Fan\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eClosed Loop Control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eExhaust Fan\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eClosed Loop Control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\" colspan=\"2\"\u003e\u003cstrong\u003eFilaments Supported\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePLA, PETG, PCTG, TPU, EVA, PE, PP, PHA\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSupported\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePVA, BVOH, support filament\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSupported\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eCarbon\/glass fiber reinforced: PLA, PETG\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSupported\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eABS, ASA, HIPS, PA, PAHT, PC, PET, PPA, PPS\u003cbr\u003eCarbon\/glass fiber reinforced: ABS, ASA, HIPS, PA, PAHT, PC, PET, PPA, PPS\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSupported\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eFilament Drying\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSupported\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\" colspan=\"2\"\u003e\u003cstrong\u003eSensor\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eLive View Camera\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eBuilt-in; 1920*1080\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eToolhead Camera\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eBuilt-in; 1920*1080\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eBirdsEye Camera\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eOptional; 3264*2448\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eDoor Sensor\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSupported\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eFilament Run Out Sensor\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSupported\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eNozzle Clumping Sensor\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSupported\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eFilament Odometry\u003csup\u003e1)\u003c\/sup\u003e\n\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSupported\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePower Loss Recovery\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSupported\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\" colspan=\"2\"\u003e\u003cstrong\u003eElectrical Requirements\u003csup\u003e2)\u003c\/sup\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eVoltage\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eHigh-voltage version: 200-240 VAC, 50\/60 Hz\u003cbr\u003eLow-voltage version: 100-120 VAC, 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eMax Power\u003csup\u003e3)\u003c\/sup\u003e\n\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eHigh-voltage version: 2250 W @ 220 V\u003cbr\u003eLow-voltage version: 1850 W @ 110 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eStandby Power\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eWi-Fi disconnected: 11.7-12.2 W\u003cbr\u003eWi-Fi connected: 12.2-12.7 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSteady-State Power\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eHigh-voltage version:\u003cbr\u003ePLA (25°C): 240 W @ 220 V\u003cbr\u003ePC (25°C): 540 W @ 220 V\u003cbr\u003eLow-voltage version:\u003cbr\u003ePLA (25°C): 240 W @ 110 V\u003cbr\u003ePC (25°C): 540 W @ 110 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eLow Power Mode\u003csup\u003e4)\u003c\/sup\u003e\n\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e1050 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\" colspan=\"2\"\u003e\u003cstrong\u003eEnvironmental Requirements\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e10 °C - 30 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\" colspan=\"2\"\u003e\u003cstrong\u003eElectronics\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eTouchscreen\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e5-inch 854*480 touchscreen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eStorage\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eBuilt-in 64 GB EMMC and USB port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eControl Interfaces\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eTouchscreen, mobile App, PC App\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eMotion Controller\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSingle-core Cortex-M4 and single-core Cortex-M7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eApplication Processor\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eQuad-core ARM with dedicated NPU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\" colspan=\"2\"\u003e\u003cstrong\u003eSoftware\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSlicer\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eBambu Studio\u003cbr\u003eSupports third-party slicers which export standard G-code, such as Super Slicer, PrusaSlicer and Cura, but certain advanced features may not be supported.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\" colspan=\"2\"\u003e\u003cstrong\u003eNetwork Control\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eEthernet\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eNot available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eWireless Network\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eWi-Fi 6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eNetwork Kill Switch\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eNot available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eRemovable Network Module\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eNot available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e802.1X Network Access Control\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eNot available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\" colspan=\"2\"\u003e\u003cstrong\u003eWi-Fi\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eOperating Frequency\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e2412 - 2472 MHz, 5150 - 5850 MHz (FCC\/CE)\u003cbr\u003e2400 - 2483.5 MHz, 5150 - 5850 MHz (SRRC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eWi-Fi Transmitter Power (EIRP)\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e2.4 GHz: \u0026lt;23 dBm (FCC); \u0026lt;20 dBm (CE\/SRRC\/MIC)\u003cbr\u003e5 GHz Band1\/2: \u0026lt;23 dBm (FCC\/CE\/SRRC\/MIC)\u003cbr\u003e5 GHz Band3: \u0026lt;30 dBm (CE); \u0026lt;24 dBm (FCC)\u003cbr\u003e5 GHz Band4: \u0026lt;23 dBm (FCC\/SRRC); \u0026lt;14 dBm (CE)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eWi-Fi Protocol\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eIEEE 802.11 a\/b\/g\/n\/ac\/ax\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e1) For Bambu Lab filament, the initial weight can be read automatically through RFID or entered manually. For third-party filament, enter the initial weight manually.\u003cbr\u003e2) The printer's voltage specifications vary by sales region. Before use, please check the label next to the power socket on the printer to ensure the supplied voltage matches the indicated voltage.\u003cbr\u003e3) To quickly heat the heatbed to the required temperature, the printer will run at maximum power for about 3-5 minutes.\u003cbr\u003e4) If the circuit has limited power capacity, you can enable Low Power Mode. After it is enabled, the total energy use remains unchanged, and the heatbed and chamber will heat up more slowly.\u003c\/p\u003e\n\u003ch5\u003eWhat's In The Box\u003c\/h5\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003cthead class=\"voxel-product-description-table-head\"\u003e\n\u003ctr\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003e\u003c\/th\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003e\u003c\/th\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003eH3C Combo\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cimg alt=\"Bambu Lab H3C\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/Bambu_Lab_H3C.png?v=1793739214\" style=\"width: 60px; height: 60px; object-fit: contain;\"\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eBambu Lab H3C\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e✓\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cimg alt=\"Bambu Lab AMS 3H\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/Bambu_Lab_AMS_3H.png?v=1793739299\" style=\"width: 60px; height: 60px; object-fit: contain;\"\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eBambu Lab AMS 3H\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e✓\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cimg alt=\"Printer Power Cord\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/Printer_Power_Cord.png?v=1793739311\" style=\"width: 60px; height: 60px; object-fit: contain;\"\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePrinter Power Cord\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e✓\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cimg alt=\"Dryer Module Power Cord\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/Dryer_Module_Power_Cord.png?v=1793739315\" style=\"width: 60px; height: 60px; object-fit: contain;\"\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eDryer Module Power Cord\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e✓\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cimg alt=\"Bambu Bus Cable 6-pin\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/Bambu_Bus_Cable_6-pin.png?v=1793739321\" style=\"width: 60px; height: 60px; object-fit: contain;\"\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eBambu Bus Cable 6-pin\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e✓\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cimg alt=\"Textured PEI Build Plate\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/Textured_PEI_Build_Plate.png?v=1793739328\" style=\"width: 60px; height: 60px; object-fit: contain;\"\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eTextured PEI Build Plate\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e✓\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cimg alt=\"0.4mm PrintTool\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/261.png?v=1793739332\" style=\"width: 60px; height: 60px; object-fit: contain;\"\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e0.4mm PrintTool\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cimg alt=\"0.4mm PrintTool (for 2.85mm filament)\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/20261102-105605.png?v=1793739337\" style=\"width: 60px; height: 60px; object-fit: contain;\"\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e0.4mm PrintTool (for 2.85mm filament)\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003cimg alt=\"Accessories Box\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/Accessories_Box.png?v=1793739344\" style=\"width: 60px; height: 60px; object-fit: contain;\"\u003e\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eAccessories Box\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e✓\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e"}
  1. Accueil
  2. Bambu Lab H3C 3D Printer

Bambu Lab H3C 3D Printer

Description du produit
Voxel SKU: BBL-3DP-H3C-CMB-000
Vendeur: Bambu Lab
Vendor MPN: PF008-P+SA017-CA
EN STOCK : 0
$3,499.00
La quantité maximale disponible est atteinte.

Produits Connexes

Summary

The Bambu Lab H3C is a next-generation tool-changer 3D printer designed for effortless, high-speed multi-material printing. It features an integrated filament management system with 9 independent PrintTools, allowing for 6-second material swaps with minimal purge and full support for advanced filaments ranging from rigid engineering-grade materials to ultra-soft TPU.

Description

Bambu Lab H3C

 


Swaptek™ - 6-Second Print-to-Print Material Switch


Nine PrintTools, each with its own dedicated filament path and heater, keep every material loaded, preheated, and ready to print. No need to retract one filament before loading another. With an optimized design, fine-tuned parameters, and active preheating, switching between PrintTools takes as little as 6 seconds.



Active Pre-Heat


Heating a nozzle usually means waiting. Active Pre-Heat looks ahead to the next tool change and warms the incoming nozzle while the current one is still printing - so the new material starts laying down within 6 seconds.


 

FlexFeed Extruder


Soft TPU, up to 3x faster - without jams. Printing soft TPU has traditionally been slow because flexible filament can buckle before reaching the nozzle, limiting extrusion speed. FlexFeed supports both 1.75 mm and 2.85 mm filament, with dedicated 2.85 mm TPU providing greater resistance to buckling and higher volumetric flow. The result: reliable printing with TPU as soft as 75A at up to 3x the flow rate of traditional printers. A cam-driven mechanism, powered by a PMSM motor, keeps tension precise and consistent - so every extrusion stays rock-solid.


 

Mixed Nozzle Sizes


Speed where you want it. Detail where it matters. Fine details call for a 0.2 mm nozzle, structural parts are better suited to 0.4 mm, and soft TPU parts require a dedicated TPU nozzle. H3C can carry different nozzle sizes at once. Paired with Bambu Studio's new mixed-diameter toolpath planning algorithm, each nozzle prints at a layer height that suits it and plays to its strengths, without having to share a single layer height.


 

Retractable Rack


It's all about curiosity. Watching a print come to life is part of the magic of 3D printing. That's why the rack retracts out of view, giving you a clear look inside the chamber. Pull up a chair, watch the first layer take shape, and enjoy the process.


 

More Than 3D Printing (Optional)


Print. Cut. Draw. Deboss. All in one machine, all on its own. Swaptek isn't limited to PrintTools. Optional CutTool, DrawTool, DebossTool - and more - mount the same way and switch automatically. Multi-process projects no longer mean multiple machines, manual swaps, or repeated setups. One job, every process, hands off.


 

AMS 3H - Filament Management Built For Tool Changer


A fully enclosed, integrated filament management system built for Swaptek™: every roll stays sealed against moisture and feeds automatically into the PrintTool. A built-in 2-slot dryer takes extra care of the most hygroscopic filaments - PA, PET, and TPU.

 

 

Auto Filament Loader


No guesswork on loading. Drop a filament into any of the nine slots and the AMS 3H detects, routes, and engages it with the PrintTool automatically - across all 9 paths.


 

Built-In Dryer


A dedicated 2-slot dryer sits right in the filament slots and works with Swaptek™ - drying on demand or mid-print, so prep never stalls production. It reaches 85°C, enough for engineering-grade PA, PC, and carbon-fiber-filled filaments.


 

Auxiliary AMS


Nine materials, with room for more. Most toolchangers limit the number of materials to their available tools. The H3C goes further. Connect existing Bambu Lab AMS units through PrintTool No. 1 to support up to 24 filament spools, unlocking more colors and materials in a single print without changing your workflow.


 

Integrated Design


Filament storage, built in - not hanging off. No spools hanging off the side, no dryer taking up valuable workspace. The H3C integrates filament storage and drying into a clean, compact design, maintaining a footprint comparable to a single-nozzle printer.


 

Flagship Performance. No Compromise.


Behind the H3C's advanced multi-material capabilities is a foundation engineered for precision and performance. Cross-flow cooling delivers cleaner overhangs, a 65°C heated chamber helps minimize warping with engineering-grade materials, and an advanced motion system maintains fine detail even at high speeds. Complex prints demand more from your printer. The H3C is built to deliver.


 

Motion System Upgrade


Lighter head. Faster prints. Same precision. The toolhead and X-axis assembly are 40% lighter, reducing inertia for faster, more precise movement. With acceleration reaching 25,000 mm/s² and travel speeds up to 1,400 mm/s, the H3C delivers exceptional speed while minimizing vibrations and ringing that can affect print quality.


 

Vision Encoder (Optional)


50 μm motion accuracy, held for years, not weeks. For projects where precision matters, from engineering components to production runs, the optional Vision Encoder helps maintain accuracy over time. By providing an absolute optical reference, it enables recalibration to compensate for mechanical wear and drift, restoring motion accuracy to under 50 μm across the build volume.


 

Cross-Flow Cooling


Cooled at every level. Print clean, even in summer. The H3C features four layers of cooling working together. A CFD-optimized part cooling fan and dual auxiliary fans help maintain clean overhangs and bridges, even at high speeds. A dedicated PrintTool fan maintains thermal stability during extended printing and frequent PrintTool changes, while a chamber fan draws in cooler air to help regulate internal temperatures.


 

350°C Nozzle & Active Chamber Heating


Engineered for high temperatures, from nozzle to chamber. Engineering-grade filaments demand precise temperature control. The H3C delivers with active dual-zone chamber heating up to 65°C, helping maintain consistent temperatures and minimize warping. All nine hardened-steel nozzles reach up to 350°C, supporting demanding materials such as ABS, PC, PA-CF, PET-CF, and more.


 

Full-Auto Calibration


Nine tools, calibrated automatically - every time. With nine PrintTools working together, precision is essential. The H3C automatically handles PrintTool docking calibration, offset compensation for accurate color and material alignment, and bed leveling before every print. No manual adjustments needed.


 

AI Monitoring


It watches, so you don't have to. A full array of vision systems watches from before the first layer to the last. Up front, the H3C checks the chamber against your slicer setup and flags mismatches while they're easy to fix. Then its AI catches spaghetti, purge-bin jams, and clogs before they cascade. Check in whenever you like.


 

All-New HMS With MiniWiki


Find the fix, right on your screen. The new HMS doesn't just throw an error code at you. It diagnoses the actual cause - narrowing it down, ranking the possibilities, and explaining what each one means in plain language. Then MiniWiki walks you through the fix, right on the printer's screen. No QR codes. No phones. No flipping between the machine and a help page. Most issues resolved before your coffee gets cold.


 

Official Accessories


Made to fit your space. A 3D printer shouldn't take over your space - it should fit into it. Bambu Lab's official accessories make the H3C feel like a natural part of your workspace.

 

 

Bambu Station L


Lift it up. Tidy it up. Bambu Station L lifts the H3C to a comfortable working height - easier loading, maintenance, and monitoring, no stooping. Underneath, dedicated storage keeps tools, spare filament, and essentials right where you reach for them.

 

 

Bambu Lab E1 Air Purifier


Clean air. No compromises. Working next to a printer shouldn't mean breathing what it makes. The Bambu Lab E1 pairs with your H3C and kicks in filtration the moment a print starts - capturing VOCs and harmful gases, PM2.5 and ultrafine particles, and microplastics released during printing.

Specifications
Parameter Value
Printing Technology
Type Fused Filament Fabrication
Body
Build Volume (L x W x H) 330*320*325 mm
Enclosure Type Enclosed
Hotend Switching System Bambu Lab SwapTek™ 9-Tool Switching
Chassis Steel
Outer Frame Plastic
Dimensions And Weight
Package Dimensions 600*630*700 mm
Product Dimensions 493*571*587 mm
Recommended Installation Space 593*1056*1306 mm
Net Weight 36.28 kg (including the AMS 3H)
Toolhead
Extruder Gear Hardened Steel
Included Nozzle Material Hardened Steel
Max Nozzle Temperature 350 °C
Included Nozzle Diameter 0.4 mm
Supported Nozzle Diameter 0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm
Filament Cutter Built into the PrintTool
Expansion Options Supports the CraftTool (CutTool, DrawTool, and more coming)
Supported Filament Diameter 1.75 mm, 2.85 mm (Bypass feed only)
Extruder Motor Bambu Lab high-precision brushless servo motor with planetary gearbox
Heatbed
Build Plate Material Flexible Steel Plate
Included Build Plate Type Textured PEI Plate
Supported Build Plate Type Textured PEI Plate, Cool Plate SuperTack, Engineering Plate
Max Heatbed Temperature 120 °C
Speed
Max Speed Of Toolhead 1,400 mm/s
Max Acceleration Of Toolhead 25,000 mm/s²
Max Flow For Hotend 40 mm³/s (Test parameters: 250 mm round model with a single outer wall; Bambu Lab ABS; 280 °C printing temperature)
Chamber Temperature Control
Active Chamber Heating Supported
Max Temperature 65 °C
Air Purification
HEPA Filter Grade H11
Activated Carbon Filter Type Granulated Coconut Shell
VOC Filtration Excellent
Particulate Matter Filtration Supported
Cooling
Part Cooling Fan Closed Loop Control
Hotend Cooling Fan Closed Loop Control
Main Control Board Fan Closed Loop Control
Chamber Heat Circulation Fan Closed Loop Control
Auxiliary Part Cooling Fan Closed Loop Control
Exhaust Fan Closed Loop Control
Filaments Supported
PLA, PETG, PCTG, TPU, EVA, PE, PP, PHA Supported
PVA, BVOH, support filament Supported
Carbon/glass fiber reinforced: PLA, PETG Supported
ABS, ASA, HIPS, PA, PAHT, PC, PET, PPA, PPS
Carbon/glass fiber reinforced: ABS, ASA, HIPS, PA, PAHT, PC, PET, PPA, PPS		 Supported
Filament Drying Supported
Sensor
Live View Camera Built-in; 1920*1080
Toolhead Camera Built-in; 1920*1080
BirdsEye Camera Optional; 3264*2448
Door Sensor Supported
Filament Run Out Sensor Supported
Nozzle Clumping Sensor Supported
Filament Odometry1) Supported
Power Loss Recovery Supported
Electrical Requirements2)
Voltage High-voltage version: 200-240 VAC, 50/60 Hz
Low-voltage version: 100-120 VAC, 50/60 Hz
Max Power3) High-voltage version: 2250 W @ 220 V
Low-voltage version: 1850 W @ 110 V
Standby Power Wi-Fi disconnected: 11.7-12.2 W
Wi-Fi connected: 12.2-12.7 W
Steady-State Power High-voltage version:
PLA (25°C): 240 W @ 220 V
PC (25°C): 540 W @ 220 V
Low-voltage version:
PLA (25°C): 240 W @ 110 V
PC (25°C): 540 W @ 110 V
Low Power Mode4) 1050 W
Environmental Requirements
Operating Temperature 10 °C - 30 °C
Electronics
Touchscreen 5-inch 854*480 touchscreen
Storage Built-in 64 GB EMMC and USB port
Control Interfaces Touchscreen, mobile App, PC App
Motion Controller Single-core Cortex-M4 and single-core Cortex-M7
Application Processor Quad-core ARM with dedicated NPU
Software
Slicer Bambu Studio
Supports third-party slicers which export standard G-code, such as Super Slicer, PrusaSlicer and Cura, but certain advanced features may not be supported.
Network Control
Ethernet Not available
Wireless Network Wi-Fi 6
Network Kill Switch Not available
Removable Network Module Not available
802.1X Network Access Control Not available
Wi-Fi
Operating Frequency 2412 - 2472 MHz, 5150 - 5850 MHz (FCC/CE)
2400 - 2483.5 MHz, 5150 - 5850 MHz (SRRC)
Wi-Fi Transmitter Power (EIRP) 2.4 GHz: <23 dBm (FCC); <20 dBm (CE/SRRC/MIC)
5 GHz Band1/2: <23 dBm (FCC/CE/SRRC/MIC)
5 GHz Band3: <30 dBm (CE); <24 dBm (FCC)
5 GHz Band4: <23 dBm (FCC/SRRC); <14 dBm (CE)
Wi-Fi Protocol IEEE 802.11 a/b/g/n/ac/ax


1) For Bambu Lab filament, the initial weight can be read automatically through RFID or entered manually. For third-party filament, enter the initial weight manually.
2) The printer's voltage specifications vary by sales region. Before use, please check the label next to the power socket on the printer to ensure the supplied voltage matches the indicated voltage.
3) To quickly heat the heatbed to the required temperature, the printer will run at maximum power for about 3-5 minutes.
4) If the circuit has limited power capacity, you can enable Low Power Mode. After it is enabled, the total energy use remains unchanged, and the heatbed and chamber will heat up more slowly.

What's In The Box
H3C Combo
Bambu Lab H3C Bambu Lab H3C ✓
Bambu Lab AMS 3H Bambu Lab AMS 3H ✓
Printer Power Cord Printer Power Cord ✓
Dryer Module Power Cord Dryer Module Power Cord ✓
Bambu Bus Cable 6-pin Bambu Bus Cable 6-pin ✓
Textured PEI Build Plate Textured PEI Build Plate ✓
0.4mm PrintTool 0.4mm PrintTool 8
0.4mm PrintTool (for 2.85mm filament) 0.4mm PrintTool (for 2.85mm filament) 1
Accessories Box Accessories Box ✓