Surgical Guide Resin is an autoclavable, biocompatible resin for 3D printing surgical guides, drilling templates, pilot drill guides, and device sizing templates that exceed dental demands in accuracy, part quality, and performance. Surgical Guide Resin was formulated specifically for Formlabs printers and rigorously tested to meet solvent disinfection and autoclave sterilization standards for implant systems.

Read our Application Guide to learn the complete digital workflow and best practices for making 3D printed surgical guides on your Formlabs 3D printer.

Why Choose Surgical Guide Resin?
Surgical Guide Resin provides dental professionals with a biocompatible material for the production of dimensionally accurate dental implant guides and templates.

Reliable
Consistency produce reliable guides.

Efficient
Leverage a digital workflow from intraoral scanning to production.

Biocompatibility
Provide the patient and clinician the peace of mind they deserve.

Applications
Surgical Guide Resin is a premium-quality material for printing surgical implant guides.

Consider Surgical Guide Resin for:

Splints
Occlusal Guards
Device Sizing Templates
Drilling Templates

Material Properties* Surgical Guide Resin

Elongation: 12%
Flexural Strength: > 102 MPa
Flexural Modulus: > 2400 MPa

* Material properties may vary based on part geometry, print orientation, print settings, and temperature. Data for post-cured samples were measured on Type IV tensile bars printed on a Form 2 printer with 100 μm Surgical Guide Resin settings, washed in a Form Wash for 20 minutes in ≥99% Isopropyl Alcohol, and post-cured at 60°C for 30 minutes in a Form Cure

Produits

Surgical Guide Resin (Form 4B) 1L

Site Map

Rester en contact