This material is a high temperature polyamide-based material that has the strength of PA6 with excellent printability. As an Ultimaker Certified Material, the LEHVOSS 9825 NT material have their print profiles, material quality and technical datasheets validated by Ultimaker, ensuring a mark of quality for Ultimaker users. It also features NFC technology in the spool that is recognized by Ultimaker printers and software, enabling a seamless workflow for users.

Can be used with the Polybox or the Material Station

Predrying is recommended (PrintDry)

Color : White

Diameter : 2.85mm

Product Data Sheet

UMK SKU : 230894

Features

Unreinforced PAHT, natural color;
Designed for industrial applications;
PA6 based material, easy to print with low warping and increased layer adhesion;
Please keep the material in a dry environment to prevent water uptake;
If the material shows bubbles, rough surface or oozing, please dry the material at 70 °C for >5 hours;
Magigoo PA or similar, glue or BuildTak or similar are recommended to improve 1st layer adhesion.

Compatibility

Compatible printers

Ultimaker 3
Ultimaker 3 Extended
Ultimaker S5
Ultimaker S3

Compatible support materials

Ultimaker PVACompatible with Material StationOptimized for Air Manager

Materials

Material characteristics

Heat resistant 100-150 C High temperature Strong Tough

Produits

Résine Formlabs Tough 1500 1L

Résine Formlabs Haute résistance 2000 1L

LUVOCOM 3F PAHT 9825 (High Temperature Nylon) - White

Site Map

Rester en contact