$19.99 $27.99
PolyLite PLA by Polymaker is a high-quality PLA filament designed for reliability and ease of printing. Filament diameter : 1.75mm Net weight : 1kg Color : natural, white, grey, black, orange, yellow, green, teal, blue, purple and red Data Sheets Click here to download the Technical Data Sheet for the PolyLite PLA filament. Click here to downloa...
$12.99
La solution d'adhésion polyvalente pour vos besoins d'impression 3D. Utilisez avec du ruban bleu pour l'impression sur un lit non chauffant, ou directement sur une vitre ou un lit chauffant à revêtement de PEI pour maximiser l'adhésion de votre impression, réduire la déformation et éviter des impressions ratées. Utile pour l'impression de P...
$9.99
La solution d'adhésion polyvalente pour vos besoins d'impression 3D. Utilisez avec du ruban bleu pour l'impression sur un lit non chauffant, ou directement sur une vitre ou un lit chauffant à revêtement de PEI pour maximiser l'adhésion de votre impression, réduire la déformation et éviter des impressions ratées. Utile pour l'impression de ...
$9.99
Buse en laiton 0.40mm pour tête chauffante E3D v6.SpecsMatériau : laitonDiamètre de l'ouverture : 0.40mmDiamètre du filament : 1.75mmFiletage : M6
$14.99
Replacement hotend thermistor. Fully wired and ready to be installed. It is ONLY compatible with MK2 / MK2S / MK2.5 / MK2.5S / MK3 / MK3S / MK3S+ / MK3.5 This product includes: Hotend thermistor (1 pcs) Specifications: Connector: Molex 5057-9402 Cable length: 750 mm To correctly install this replacement part, visit the Prusa Research kno...
$17.00
* 6.4 oz ou 24 oz ** Pour usage industriel seulement *** impressions SLA/SLS, impressions FDM (ABS, PLA, Laywoo-D3, WoodFill, T-GLASE etc...) *** -> Hacking t-glase pour un fini semblable au verre! <- *** XTC-3D® est un enduit protecteur pour lissage et finition de pièces imprimées en 3D. Deux ...
$11.99
Replacement heater cartridge. Fully wired and ready to be installed. The heater cartridge is ready to fit to a Molex 0395300002 connector (not included, see accessories); you can reuse the one already on your board if replacing an existing heater cartridge. Power : 40W 24V It is ONLY compatible with Prusa i3 MK3 / MK3S / MK3S+
$7.94
Replacement heatbed thermistor set for the Original Prusa MK2/S, MK2.5/S, MK3/S/+ and MINI/+ This product includes: Heatbed thermistor (1 pcs) Kapton tape (1 pcs) Aluminum tape (1 pcs) Specifications: Connector: Molex 5057-9402 Cable length: 650 mm To correctly install this replacement part, visit the Prusa Research knowledge base at hel...
$24.99
Découvrez le nouveau filament PLA Régulier de Materio3D ! Le PLA Régulier de Materio3D fonctionne bien et présente toutes les caractéristiques typiques du PLA. - Il s'imprime exceptionnellement bien et le résultat final de l'impression est de haute qualité.- Ce filament est rigide mais un peu plus cassant que le Tough PLA de Materio3D.- C'...
$83.84
The recommended filament to use with your Ultimaker 3D printer. The Ultimaker PLA (polylactic acid) is made of organic and renewable resources. Easy to use and produces a good surface finish for a variety of 3D printing projects, no matter your skill level. Diameter : 2.85mm Color : Transparent, Pearl White, White, Silver Metallic, Black, Orange...
$7.49
La protection de silicone protège votre buse de l'accumulation de plastique calciné. Elle offre également une meilleure isolation de la tête chauffante, et détourne la chaleur de votre modèle imprimé.Fait de silicone résistant à la chaleur et non-adhésif, la protection évite l'accumulation de plastique en fusion de matériaux collants comme les c...
$29.99
Materio3D PETG filament is now available in Canada. Manufactured on the south shore of Montreal by Materio3D, This PETG filament is rigid, tough, high impact strength, and has moderate heat resistance. Diameter : 1.75mm Color: Rockies Cold White, Atlas Coal Black, Montréal Roadworks Orange
Suitable for Bambu Lab A1, X1 & P1 series
Side 1: Smooth PEI Plate
Side 2: Smooth PEI Plate
The use of a specially selected matte PEI sheet can impart a smooth and matte texture to the bottom surface of the printed object, enhancing its overall appearance.
PEI enables printing not only with common materials such as PLA, TPU, PETG, but also with materials that require high temperatures like ABS and Nylon.
Note: Please apply glue to prevent the sheet from tearing if printing with filaments other than PLA.
The Bambu Smooth PEI Plate features a 0.5mm-thick spring steel plate that enhances magnetic adhesion. This helps to prevent warping and ensure optimal print quality during 3D printing. It also helps when printing larger models with materials that are prone to warping such as ABS, PC, and Nylon.
Please note that other slicer settings might need to be adjusted based on the printed model and the filament requirements
| Materials | Heatbed Temperature | Glue Stick Required? |
| PLA/PLA-CF/PLA-GF | 45~60℃ | No |
| PETG/PETG-CF | 60~80℃ | Glue Stick/Liquid Glue |
| ABS (not for A1 mini) | 90~100℃ | Glue Stick/Liquid Glue |
| ASA (not for A1 mini) | 90~100℃ | Glue Stick/Liquid Glue |
| TPU | 35~45℃ | Glue Stick/Liquid Glue |
| PVA | 45~60℃ | Glue Stick/Liquid Glue |
| PC/PC-CF (not for A1 mini) | 90~110℃ | Glue Stick |
| PA/PA-CF/PAHT-CF (not for A1 mini) | 90~110℃ | Glue Stick |
| PET-CF (not for A1 mini) | 80~100℃ | Glue Stick/Liquid Glue |
Step 1: Align the plate with the fixed points of the platform with the name of the plate facing you
Step 2: Lower the plate and secure to the magnetic platform
| Material | Smooth PEI Sheet + Magnetic Spring Steel Plate |
| Surface Temperature Resistance | Up to 120℃ |
| Thickness | Smooth PEI Sheet - 0.125mm Spring Steel Plate - 0.5mm/0.4mm |
| Usable Print Size | 256*256mm 180*180mm |
| Packaging Size | 300*270*17mm 220*190*15mm |
| Packaging Weight | 0.45kg 0.23kg |