$19.99 $27.99
PolyLite PLA by Polymaker is a high-quality PLA filament designed for reliability and ease of printing. Filament diameter : 1.75mm Net weight : 1kg Color : natural, white, grey, black, orange, yellow, green, teal, blue, purple and red Data Sheets Click here to download the Technical Data Sheet for the PolyLite PLA filament. Click here to downloa...
$12.99
La solution d'adhésion polyvalente pour vos besoins d'impression 3D. Utilisez avec du ruban bleu pour l'impression sur un lit non chauffant, ou directement sur une vitre ou un lit chauffant à revêtement de PEI pour maximiser l'adhésion de votre impression, réduire la déformation et éviter des impressions ratées. Utile pour l'impression de P...
$9.99
La solution d'adhésion polyvalente pour vos besoins d'impression 3D. Utilisez avec du ruban bleu pour l'impression sur un lit non chauffant, ou directement sur une vitre ou un lit chauffant à revêtement de PEI pour maximiser l'adhésion de votre impression, réduire la déformation et éviter des impressions ratées. Utile pour l'impression de ...
$9.99
Buse en laiton 0.40mm pour tête chauffante E3D v6.SpecsMatériau : laitonDiamètre de l'ouverture : 0.40mmDiamètre du filament : 1.75mmFiletage : M6
$14.99
Replacement hotend thermistor. Fully wired and ready to be installed. It is ONLY compatible with MK2 / MK2S / MK2.5 / MK2.5S / MK3 / MK3S / MK3S+ / MK3.5 This product includes: Hotend thermistor (1 pcs) Specifications: Connector: Molex 5057-9402 Cable length: 750 mm To correctly install this replacement part, visit the Prusa Research kno...
$17.00
* 6.4 oz ou 24 oz ** Pour usage industriel seulement *** impressions SLA/SLS, impressions FDM (ABS, PLA, Laywoo-D3, WoodFill, T-GLASE etc...) *** -> Hacking t-glase pour un fini semblable au verre! <- *** XTC-3D® est un enduit protecteur pour lissage et finition de pièces imprimées en 3D. Deux ...
$11.99
Replacement heater cartridge. Fully wired and ready to be installed. The heater cartridge is ready to fit to a Molex 0395300002 connector (not included, see accessories); you can reuse the one already on your board if replacing an existing heater cartridge. Power : 40W 24V It is ONLY compatible with Prusa i3 MK3 / MK3S / MK3S+
$7.94
Replacement heatbed thermistor set for the Original Prusa MK2/S, MK2.5/S, MK3/S/+ and MINI/+ This product includes: Heatbed thermistor (1 pcs) Kapton tape (1 pcs) Aluminum tape (1 pcs) Specifications: Connector: Molex 5057-9402 Cable length: 650 mm To correctly install this replacement part, visit the Prusa Research knowledge base at hel...
$24.99
Découvrez le nouveau filament PLA Régulier de Materio3D ! Le PLA Régulier de Materio3D fonctionne bien et présente toutes les caractéristiques typiques du PLA. - Il s'imprime exceptionnellement bien et le résultat final de l'impression est de haute qualité.- Ce filament est rigide mais un peu plus cassant que le Tough PLA de Materio3D.- C'...
$83.84
The recommended filament to use with your Ultimaker 3D printer. The Ultimaker PLA (polylactic acid) is made of organic and renewable resources. Easy to use and produces a good surface finish for a variety of 3D printing projects, no matter your skill level. Diameter : 2.85mm Color : Transparent, Pearl White, White, Silver Metallic, Black, Orange...
$7.49
La protection de silicone protège votre buse de l'accumulation de plastique calciné. Elle offre également une meilleure isolation de la tête chauffante, et détourne la chaleur de votre modèle imprimé.Fait de silicone résistant à la chaleur et non-adhésif, la protection évite l'accumulation de plastique en fusion de matériaux collants comme les c...
$29.99
Materio3D PETG filament is now available in Canada. Manufactured on the south shore of Montreal by Materio3D, This PETG filament is rigid, tough, high impact strength, and has moderate heat resistance. Diameter : 1.75mm Color: Rockies Cold White, Atlas Coal Black, Montréal Roadworks Orange
Important Notice Before Purchase
1. Limitations: After installing the TPU hotend, the filament cutter installation is not supported, so the filament cutter function cannot be used, and the right nozzle does not support automatic filament changing and automatic filament feeding and retracting.
2. Only flexible filaments are allowed: The TPU hotend has a special inner coating, printing hard filaments is prohibited (such as PLA, PETG, TPU for AMS), otherwise it will cause the coating to wear and fail.
3. Position Limitation: The TPU hotend can only be installed on the right nozzle. If it is installed on the left nozzle, it will cause the nozzle lifting mechanism to malfunction.
4. Installation Guide: Please read the official H2D TPU High-Flow Kit installation guide on Bambu Lab Wiki before purchasing.
5. Model Compatibility: Only supported on H2D and H2D Pro. It is not compatible with other models.
The specially designed hotend reduces extrusion resistance and extends the melting zone, enabling faster and more stable TPU printing. When printing 90A TPU, it delivers up to 100% higher flow rate and cuts print time by around 30% for typical applications such as footwear.



Print parameters are precisely fine-tuned for all Bambu TPU filaments when used with the TPU High-Flow Kit. No manual tweaking required—allowing sticky TPU materials to print smoothly right out of the box.

Installation takes just a few minutes. Simply pop off the front cover, remove the filament cutter, and slide in the High-Flow hotend—ready to print in no time.
| TPU | H2D Standard Flow Hotend | H2D TPU High-Flow Hotend | ||
|---|---|---|---|---|
| 0.4 mm Nozzle | 0.6 mm Nozzle | 0.4 mm Nozzle | 0.6 mm Nozzle | |
| 85A | Not Compatible | 2.2 mm³/s | 2.5 mm³/s | 4.8 mm³/s |
| 90A | 2.8 mm³/s | 2.8 mm³/s | 5.6 mm³/s | 5.6 mm³/s |
| 95A HF | 12 mm³/s | 12 mm³/s | 16 mm³/s | 16 mm³/s |
Note: Parameter optimization and speed enhancements currently apply only to Bambu TPU 85A, Bambu TPU 90A, and Bambu TPU 95A HF.
Bambu TPU 85A
Bambu TPU 90A
Bambu TPU 95A
Bambu TPU 95A HF
Generic TPU
Please refer to the installation guide for the H2D TPU High-Flow Kit available on Bambu Lab Wiki.
For TPU printing recommendations, please also refer to the TPU 85A & 90A Printing Guide for the H2 Series on Bambu Lab Wiki.
| Item | Quantity |
|---|---|
| 0.4 mm High-Flow TPU Hotend | 1 |
| 0.6 mm High-Flow TPU Hotend | 1 |
| TPU High-Flow Front Cover Guide | 1 |
| TPU Hotend Cover | 1 |
| Hotend Cover | 1 |
| M2×5 Screws for Hotend Cover | 2 |
| Parameter | Specification |
|---|---|
| Materials | Plastic, Metal |
| Color | Black |
| Packaging Size | 105 × 54 × 33 mm |
| Packaging Weight | 46.9 g |