$19.99 $27.99
PolyLite PLA by Polymaker is a high-quality PLA filament designed for reliability and ease of printing. Filament diameter : 1.75mm Net weight : 1kg Color : natural, white, grey, black, orange, yellow, green, teal, blue, purple and red Data Sheets Click here to download the Technical Data Sheet for the PolyLite PLA filament. Click here to downloa...
$12.99
La solution d'adhésion polyvalente pour vos besoins d'impression 3D. Utilisez avec du ruban bleu pour l'impression sur un lit non chauffant, ou directement sur une vitre ou un lit chauffant à revêtement de PEI pour maximiser l'adhésion de votre impression, réduire la déformation et éviter des impressions ratées. Utile pour l'impression de P...
$9.99
La solution d'adhésion polyvalente pour vos besoins d'impression 3D. Utilisez avec du ruban bleu pour l'impression sur un lit non chauffant, ou directement sur une vitre ou un lit chauffant à revêtement de PEI pour maximiser l'adhésion de votre impression, réduire la déformation et éviter des impressions ratées. Utile pour l'impression de ...
$9.99
Buse en laiton 0.40mm pour tête chauffante E3D v6.SpecsMatériau : laitonDiamètre de l'ouverture : 0.40mmDiamètre du filament : 1.75mmFiletage : M6
$14.99
Replacement hotend thermistor. Fully wired and ready to be installed. It is ONLY compatible with MK2 / MK2S / MK2.5 / MK2.5S / MK3 / MK3S / MK3S+ / MK3.5 This product includes: Hotend thermistor (1 pcs) Specifications: Connector: Molex 5057-9402 Cable length: 750 mm To correctly install this replacement part, visit the Prusa Research kno...
$17.00
* 6.4 oz ou 24 oz ** Pour usage industriel seulement *** impressions SLA/SLS, impressions FDM (ABS, PLA, Laywoo-D3, WoodFill, T-GLASE etc...) *** -> Hacking t-glase pour un fini semblable au verre! <- *** XTC-3D® est un enduit protecteur pour lissage et finition de pièces imprimées en 3D. Deux ...
$11.99
Replacement heater cartridge. Fully wired and ready to be installed. The heater cartridge is ready to fit to a Molex 0395300002 connector (not included, see accessories); you can reuse the one already on your board if replacing an existing heater cartridge. Power : 40W 24V It is ONLY compatible with Prusa i3 MK3 / MK3S / MK3S+
$7.94
Replacement heatbed thermistor set for the Original Prusa MK2/S, MK2.5/S, MK3/S/+ and MINI/+ This product includes: Heatbed thermistor (1 pcs) Kapton tape (1 pcs) Aluminum tape (1 pcs) Specifications: Connector: Molex 5057-9402 Cable length: 650 mm To correctly install this replacement part, visit the Prusa Research knowledge base at hel...
$24.99
Découvrez le nouveau filament PLA Régulier de Materio3D ! Le PLA Régulier de Materio3D fonctionne bien et présente toutes les caractéristiques typiques du PLA. - Il s'imprime exceptionnellement bien et le résultat final de l'impression est de haute qualité.- Ce filament est rigide mais un peu plus cassant que le Tough PLA de Materio3D.- C'...
$83.84
The recommended filament to use with your Ultimaker 3D printer. The Ultimaker PLA (polylactic acid) is made of organic and renewable resources. Easy to use and produces a good surface finish for a variety of 3D printing projects, no matter your skill level. Diameter : 2.85mm Color : Transparent, Pearl White, White, Silver Metallic, Black, Orange...
$7.49
La protection de silicone protège votre buse de l'accumulation de plastique calciné. Elle offre également une meilleure isolation de la tête chauffante, et détourne la chaleur de votre modèle imprimé.Fait de silicone résistant à la chaleur et non-adhésif, la protection évite l'accumulation de plastique en fusion de matériaux collants comme les c...
$29.99
Materio3D PETG filament is now available in Canada. Manufactured on the south shore of Montreal by Materio3D, This PETG filament is rigid, tough, high impact strength, and has moderate heat resistance. Diameter : 1.75mm Color: Rockies Cold White, Atlas Coal Black, Montréal Roadworks Orange
The Bambu Lab H3C is a next-generation tool-changer 3D printer designed for effortless, high-speed multi-material printing. It features an integrated filament management system with 9 independent PrintTools, allowing for 6-second material swaps with minimal purge and full support for advanced filaments ranging from rigid engineering-grade materials to ultra-soft TPU.
Nine PrintTools, each with its own dedicated filament path and heater, keep every material loaded, preheated, and ready to print. No need to retract one filament before loading another. With an optimized design, fine-tuned parameters, and active preheating, switching between PrintTools takes as little as 6 seconds.
Heating a nozzle usually means waiting. Active Pre-Heat looks ahead to the next tool change and warms the incoming nozzle while the current one is still printing - so the new material starts laying down within 6 seconds.
Soft TPU, up to 3x faster - without jams. Printing soft TPU has traditionally been slow because flexible filament can buckle before reaching the nozzle, limiting extrusion speed. FlexFeed supports both 1.75 mm and 2.85 mm filament, with dedicated 2.85 mm TPU providing greater resistance to buckling and higher volumetric flow. The result: reliable printing with TPU as soft as 75A at up to 3x the flow rate of traditional printers. A cam-driven mechanism, powered by a PMSM motor, keeps tension precise and consistent - so every extrusion stays rock-solid.
Speed where you want it. Detail where it matters. Fine details call for a 0.2 mm nozzle, structural parts are better suited to 0.4 mm, and soft TPU parts require a dedicated TPU nozzle. H3C can carry different nozzle sizes at once. Paired with Bambu Studio's new mixed-diameter toolpath planning algorithm, each nozzle prints at a layer height that suits it and plays to its strengths, without having to share a single layer height.
It's all about curiosity. Watching a print come to life is part of the magic of 3D printing. That's why the rack retracts out of view, giving you a clear look inside the chamber. Pull up a chair, watch the first layer take shape, and enjoy the process.
Print. Cut. Draw. Deboss. All in one machine, all on its own. Swaptek isn't limited to PrintTools. Optional CutTool, DrawTool, DebossTool - and more - mount the same way and switch automatically. Multi-process projects no longer mean multiple machines, manual swaps, or repeated setups. One job, every process, hands off.
A fully enclosed, integrated filament management system built for Swaptek™: every roll stays sealed against moisture and feeds automatically into the PrintTool. A built-in 2-slot dryer takes extra care of the most hygroscopic filaments - PA, PET, and TPU.
No guesswork on loading. Drop a filament into any of the nine slots and the AMS 3H detects, routes, and engages it with the PrintTool automatically - across all 9 paths.
A dedicated 2-slot dryer sits right in the filament slots and works with Swaptek™ - drying on demand or mid-print, so prep never stalls production. It reaches 85°C, enough for engineering-grade PA, PC, and carbon-fiber-filled filaments.
Nine materials, with room for more. Most toolchangers limit the number of materials to their available tools. The H3C goes further. Connect existing Bambu Lab AMS units through PrintTool No. 1 to support up to 24 filament spools, unlocking more colors and materials in a single print without changing your workflow.
Filament storage, built in - not hanging off. No spools hanging off the side, no dryer taking up valuable workspace. The H3C integrates filament storage and drying into a clean, compact design, maintaining a footprint comparable to a single-nozzle printer.
Behind the H3C's advanced multi-material capabilities is a foundation engineered for precision and performance. Cross-flow cooling delivers cleaner overhangs, a 65°C heated chamber helps minimize warping with engineering-grade materials, and an advanced motion system maintains fine detail even at high speeds. Complex prints demand more from your printer. The H3C is built to deliver.
Lighter head. Faster prints. Same precision. The toolhead and X-axis assembly are 40% lighter, reducing inertia for faster, more precise movement. With acceleration reaching 25,000 mm/s² and travel speeds up to 1,400 mm/s, the H3C delivers exceptional speed while minimizing vibrations and ringing that can affect print quality.
50 μm motion accuracy, held for years, not weeks. For projects where precision matters, from engineering components to production runs, the optional Vision Encoder helps maintain accuracy over time. By providing an absolute optical reference, it enables recalibration to compensate for mechanical wear and drift, restoring motion accuracy to under 50 μm across the build volume.
Cooled at every level. Print clean, even in summer. The H3C features four layers of cooling working together. A CFD-optimized part cooling fan and dual auxiliary fans help maintain clean overhangs and bridges, even at high speeds. A dedicated PrintTool fan maintains thermal stability during extended printing and frequent PrintTool changes, while a chamber fan draws in cooler air to help regulate internal temperatures.
Engineered for high temperatures, from nozzle to chamber. Engineering-grade filaments demand precise temperature control. The H3C delivers with active dual-zone chamber heating up to 65°C, helping maintain consistent temperatures and minimize warping. All nine hardened-steel nozzles reach up to 350°C, supporting demanding materials such as ABS, PC, PA-CF, PET-CF, and more.
Nine tools, calibrated automatically - every time. With nine PrintTools working together, precision is essential. The H3C automatically handles PrintTool docking calibration, offset compensation for accurate color and material alignment, and bed leveling before every print. No manual adjustments needed.
It watches, so you don't have to. A full array of vision systems watches from before the first layer to the last. Up front, the H3C checks the chamber against your slicer setup and flags mismatches while they're easy to fix. Then its AI catches spaghetti, purge-bin jams, and clogs before they cascade. Check in whenever you like.
Find the fix, right on your screen. The new HMS doesn't just throw an error code at you. It diagnoses the actual cause - narrowing it down, ranking the possibilities, and explaining what each one means in plain language. Then MiniWiki walks you through the fix, right on the printer's screen. No QR codes. No phones. No flipping between the machine and a help page. Most issues resolved before your coffee gets cold.
Made to fit your space. A 3D printer shouldn't take over your space - it should fit into it. Bambu Lab's official accessories make the H3C feel like a natural part of your workspace.
Lift it up. Tidy it up. Bambu Station L lifts the H3C to a comfortable working height - easier loading, maintenance, and monitoring, no stooping. Underneath, dedicated storage keeps tools, spare filament, and essentials right where you reach for them.
Clean air. No compromises. Working next to a printer shouldn't mean breathing what it makes. The Bambu Lab E1 pairs with your H3C and kicks in filtration the moment a print starts - capturing VOCs and harmful gases, PM2.5 and ultrafine particles, and microplastics released during printing.
| Parameter | Value |
|---|---|
| Printing Technology | |
| Type | Fused Filament Fabrication |
| Body | |
| Build Volume (L x W x H) | 330*320*325 mm |
| Enclosure Type | Enclosed |
| Hotend Switching System | Bambu Lab SwapTek™ 9-Tool Switching |
| Chassis | Steel |
| Outer Frame | Plastic |
| Dimensions And Weight | |
| Package Dimensions | 600*630*700 mm |
| Product Dimensions | 493*571*587 mm |
| Recommended Installation Space | 593*1056*1306 mm |
| Net Weight | 36.28 kg (including the AMS 3H) |
| Toolhead | |
| Extruder Gear | Hardened Steel |
| Included Nozzle Material | Hardened Steel |
| Max Nozzle Temperature | 350 °C |
| Included Nozzle Diameter | 0.4 mm |
| Supported Nozzle Diameter | 0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm |
| Filament Cutter | Built into the PrintTool |
| Expansion Options | Supports the CraftTool (CutTool, DrawTool, and more coming) |
| Supported Filament Diameter | 1.75 mm, 2.85 mm (Bypass feed only) |
| Extruder Motor | Bambu Lab high-precision brushless servo motor with planetary gearbox |
| Heatbed | |
| Build Plate Material | Flexible Steel Plate |
| Included Build Plate Type | Textured PEI Plate |
| Supported Build Plate Type | Textured PEI Plate, Cool Plate SuperTack, Engineering Plate |
| Max Heatbed Temperature | 120 °C |
| Speed | |
| Max Speed Of Toolhead | 1,400 mm/s |
| Max Acceleration Of Toolhead | 25,000 mm/s² |
| Max Flow For Hotend | 40 mm³/s (Test parameters: 250 mm round model with a single outer wall; Bambu Lab ABS; 280 °C printing temperature) |
| Chamber Temperature Control | |
| Active Chamber Heating | Supported |
| Max Temperature | 65 °C |
| Air Purification | |
| HEPA Filter Grade | H11 |
| Activated Carbon Filter Type | Granulated Coconut Shell |
| VOC Filtration | Excellent |
| Particulate Matter Filtration | Supported |
| Cooling | |
| Part Cooling Fan | Closed Loop Control |
| Hotend Cooling Fan | Closed Loop Control |
| Main Control Board Fan | Closed Loop Control |
| Chamber Heat Circulation Fan | Closed Loop Control |
| Auxiliary Part Cooling Fan | Closed Loop Control |
| Exhaust Fan | Closed Loop Control |
| Filaments Supported | |
| PLA, PETG, PCTG, TPU, EVA, PE, PP, PHA | Supported |
| PVA, BVOH, support filament | Supported |
| Carbon/glass fiber reinforced: PLA, PETG | Supported |
| ABS, ASA, HIPS, PA, PAHT, PC, PET, PPA, PPS Carbon/glass fiber reinforced: ABS, ASA, HIPS, PA, PAHT, PC, PET, PPA, PPS |
Supported |
| Filament Drying | Supported |
| Sensor | |
| Live View Camera | Built-in; 1920*1080 |
| Toolhead Camera | Built-in; 1920*1080 |
| BirdsEye Camera | Optional; 3264*2448 |
| Door Sensor | Supported |
| Filament Run Out Sensor | Supported |
| Nozzle Clumping Sensor | Supported |
| Filament Odometry1) | Supported |
| Power Loss Recovery | Supported |
| Electrical Requirements2) | |
| Voltage | High-voltage version: 200-240 VAC, 50/60 Hz Low-voltage version: 100-120 VAC, 50/60 Hz |
| Max Power3) | High-voltage version: 2250 W @ 220 V Low-voltage version: 1850 W @ 110 V |
| Standby Power | Wi-Fi disconnected: 11.7-12.2 W Wi-Fi connected: 12.2-12.7 W |
| Steady-State Power | High-voltage version: PLA (25°C): 240 W @ 220 V PC (25°C): 540 W @ 220 V Low-voltage version: PLA (25°C): 240 W @ 110 V PC (25°C): 540 W @ 110 V |
| Low Power Mode4) | 1050 W |
| Environmental Requirements | |
| Operating Temperature | 10 °C - 30 °C |
| Electronics | |
| Touchscreen | 5-inch 854*480 touchscreen |
| Storage | Built-in 64 GB EMMC and USB port |
| Control Interfaces | Touchscreen, mobile App, PC App |
| Motion Controller | Single-core Cortex-M4 and single-core Cortex-M7 |
| Application Processor | Quad-core ARM with dedicated NPU |
| Software | |
| Slicer | Bambu Studio Supports third-party slicers which export standard G-code, such as Super Slicer, PrusaSlicer and Cura, but certain advanced features may not be supported. |
| Network Control | |
| Ethernet | Not available |
| Wireless Network | Wi-Fi 6 |
| Network Kill Switch | Not available |
| Removable Network Module | Not available |
| 802.1X Network Access Control | Not available |
| Wi-Fi | |
| Operating Frequency | 2412 - 2472 MHz, 5150 - 5850 MHz (FCC/CE) 2400 - 2483.5 MHz, 5150 - 5850 MHz (SRRC) |
| Wi-Fi Transmitter Power (EIRP) | 2.4 GHz: <23 dBm (FCC); <20 dBm (CE/SRRC/MIC) 5 GHz Band1/2: <23 dBm (FCC/CE/SRRC/MIC) 5 GHz Band3: <30 dBm (CE); <24 dBm (FCC) 5 GHz Band4: <23 dBm (FCC/SRRC); <14 dBm (CE) |
| Wi-Fi Protocol | IEEE 802.11 a/b/g/n/ac/ax |
1) For Bambu Lab filament, the initial weight can be read automatically through RFID or entered manually. For third-party filament, enter the initial weight manually.
2) The printer's voltage specifications vary by sales region. Before use, please check the label next to the power socket on the printer to ensure the supplied voltage matches the indicated voltage.
3) To quickly heat the heatbed to the required temperature, the printer will run at maximum power for about 3-5 minutes.
4) If the circuit has limited power capacity, you can enable Low Power Mode. After it is enabled, the total energy use remains unchanged, and the heatbed and chamber will heat up more slowly.
| H3C Combo | ||
|---|---|---|
![]() |
Bambu Lab H3C | ✓ |
![]() |
Bambu Lab AMS 3H | ✓ |
![]() |
Printer Power Cord | ✓ |
![]() |
Dryer Module Power Cord | ✓ |
![]() |
Bambu Bus Cable 6-pin | ✓ |
![]() |
Textured PEI Build Plate | ✓ |
![]() |
0.4mm PrintTool | 8 |
![]() |
0.4mm PrintTool (for 2.85mm filament) | 1 |
![]() |
Accessories Box | ✓ |