$19.99 $27.99
PolyLite PLA by Polymaker is a high-quality PLA filament designed for reliability and ease of printing. Filament diameter : 1.75mm Net weight : 1kg Color : natural, white, grey, black, orange, yellow, green, teal, blue, purple and red Data Sheets Click here to download the Technical Data Sheet for the PolyLite PLA filament. Click here to downloa...
$12.99
La solution d'adhésion polyvalente pour vos besoins d'impression 3D. Utilisez avec du ruban bleu pour l'impression sur un lit non chauffant, ou directement sur une vitre ou un lit chauffant à revêtement de PEI pour maximiser l'adhésion de votre impression, réduire la déformation et éviter des impressions ratées. Utile pour l'impression de P...
$9.99
La solution d'adhésion polyvalente pour vos besoins d'impression 3D. Utilisez avec du ruban bleu pour l'impression sur un lit non chauffant, ou directement sur une vitre ou un lit chauffant à revêtement de PEI pour maximiser l'adhésion de votre impression, réduire la déformation et éviter des impressions ratées. Utile pour l'impression de ...
$9.99
Buse en laiton 0.40mm pour tête chauffante E3D v6.SpecsMatériau : laitonDiamètre de l'ouverture : 0.40mmDiamètre du filament : 1.75mmFiletage : M6
$14.99
Replacement hotend thermistor. Fully wired and ready to be installed. It is ONLY compatible with MK2 / MK2S / MK2.5 / MK2.5S / MK3 / MK3S / MK3S+ / MK3.5 This product includes: Hotend thermistor (1 pcs) Specifications: Connector: Molex 5057-9402 Cable length: 750 mm To correctly install this replacement part, visit the Prusa Research kno...
$17.00
* 6.4 oz ou 24 oz ** Pour usage industriel seulement *** impressions SLA/SLS, impressions FDM (ABS, PLA, Laywoo-D3, WoodFill, T-GLASE etc...) *** -> Hacking t-glase pour un fini semblable au verre! <- *** XTC-3D® est un enduit protecteur pour lissage et finition de pièces imprimées en 3D. Deux ...
$11.99
Replacement heater cartridge. Fully wired and ready to be installed. The heater cartridge is ready to fit to a Molex 0395300002 connector (not included, see accessories); you can reuse the one already on your board if replacing an existing heater cartridge. Power : 40W 24V It is ONLY compatible with Prusa i3 MK3 / MK3S / MK3S+
$7.94
Replacement heatbed thermistor set for the Original Prusa MK2/S, MK2.5/S, MK3/S/+ and MINI/+ This product includes: Heatbed thermistor (1 pcs) Kapton tape (1 pcs) Aluminum tape (1 pcs) Specifications: Connector: Molex 5057-9402 Cable length: 650 mm To correctly install this replacement part, visit the Prusa Research knowledge base at hel...
$24.99
Découvrez le nouveau filament PLA Régulier de Materio3D ! Le PLA Régulier de Materio3D fonctionne bien et présente toutes les caractéristiques typiques du PLA. - Il s'imprime exceptionnellement bien et le résultat final de l'impression est de haute qualité.- Ce filament est rigide mais un peu plus cassant que le Tough PLA de Materio3D.- C'...
$83.84
The recommended filament to use with your Ultimaker 3D printer. The Ultimaker PLA (polylactic acid) is made of organic and renewable resources. Easy to use and produces a good surface finish for a variety of 3D printing projects, no matter your skill level. Diameter : 2.85mm Color : Transparent, Pearl White, White, Silver Metallic, Black, Orange...
$7.49
La protection de silicone protège votre buse de l'accumulation de plastique calciné. Elle offre également une meilleure isolation de la tête chauffante, et détourne la chaleur de votre modèle imprimé.Fait de silicone résistant à la chaleur et non-adhésif, la protection évite l'accumulation de plastique en fusion de matériaux collants comme les c...
$29.99
Materio3D PETG filament is now available in Canada. Manufactured on the south shore of Montreal by Materio3D, This PETG filament is rigid, tough, high impact strength, and has moderate heat resistance. Diameter : 1.75mm Color: Rockies Cold White, Atlas Coal Black, Montréal Roadworks Orange
Premium Teeth Resin provides dental professionals with a strong, wear-resistant material, with natural aesthetics for creating printed teeth for digital dentures, temporary full-arch implant-supported restorations (All-on-X), temporary single units (crowns, inlays, onlays, and veneers), and up to seven-unit bridges.
Best-in-class intraoral mechanical properties
Nano-ceramic filled resin with industry-leading intraoral flexural strength while maintaining fracture toughness.
Natural Aesthetics
Creates realistic appliances with optimized color, translucency and opalescence
Validated Longevity
Rigorously tested to ensure a material that is resistant to wear, staining, and abrasion and maintain their original characteristics over time.
Simplified workflow
Deliver accurate high-quality prints with reduced post-processing time, easy polishability, and compatibility with conventional finishing workflows.
Premium Teeth Resin is formulated for optimal intraoral mechanics and validated longevity balanced with natural aesthetics and a simple post-processing and finishing workflow, to guarantee optimal clinical performance.
Consider Premium Teeth Resin for:
Denture teeth for removable dentures
Try-in dentures
Temporary full-arch implant-supported restorations (All-on-X appliances)
Temporary single-units (crown, inlays, onlays, veneers) and bridges (up to 7-units)

Formlabs manufactures our BioMed and Medical Device Resins at our FDA Registered facility in Ohio. These materials are designed and manufactured within our robust Quality Management System that is ISO 13485 and EU MDR certified. A dedicated team of operators and quality assurance professionals make the resins inside a certified ISO Class 8 clean room. All of our Medical Device Resins are appropriately registered with FDA and CE marked according to the EU MDR. View their ISO 13485 certification.
Premium Teeth Resin
|
Flexural Strength |
|
Flexural Modulus |
|
Shore Hardness |
|
Opacity at 1mm thickness |
Download the Premium Teeth Resin Technical Data Sheet
*Material properties may vary based on part geometry, print orientation, print settings, temperature, and disinfection or sterilization methods used. Data was obtained from parts printed using Form 3B(+), 50 μm, Premium Teeth Resin settings, and using post-processing instructions listed in the Premium Teeth Resin Manufacturing Guide. Premium Teeth Resin was tested at NAMSA World Headquarters, OH, USA.
Washing
Premium Teeth Resin may be washed using either a Formlabs-validated wash unit (1) or an ultrasonic wash unit (2).
The foundational step in any SLA post-processing workflow is to remove excess resin on the surface of the parts through an alcohol wash. Please refer to the material's manufacturing guide/IFU for washing instructions.
SETTINGS
Curing
For biocompatible materials, post-curing is necessary to achieve the safety standards determined by regulatory agencies. Please follow the material’s manufacturing guide/IFU for proper post-processing.
SETTINGS
Bulk & subscription pricing available
Contact sales@voxelfactory.com for more information.
| Bulk order quantity (L) | Discount % |
|---|---|
| 1 | 0% |
| 30 | 15% |
| 60 | 20% |
| 120 | 25% |
| 240 | 30% |
| 1.000 | 35% |
| 2.000 | 40% |
| 3.000 | 45% |