{"id":8727219601644,"title":"Bambu Lab PetG-CF (Carbon Fiber Reinforced PetG) 1Kg on spool","handle":"bambu-lab-petg-cf-carbon-fiber-reinforced-petg-1kg-on-spool","description":"\u003cdiv class=\"pct_t-p\"\u003e\n\u003ch2 class=\"pct_t\"\u003eBambu PETG-CF\u003c\/h2\u003e\n\u003cp class=\"pct_p\"\u003eBambu PETG-CF is a composite material consisting of PETG and carbon fiber. The new formula greatly improved printing quality by reducing clumping compared to traditional PETG. With the addition of carbon fiber, Bambu PETG-CF offers improved strength while maintaining good toughness and a shiny look. It is an ideal material for drone parts, racing models, and various functional parts that require both high performance, especially impact strength, and a sleek appearance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cb\u003eProduct Features\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLess Clumping and Stringing\u003c\/li\u003e\n\u003cli\u003ePremium Print Surface\u003c\/li\u003e\n\u003cli\u003eImproved Mechanical Properties \u0026amp; High Flexibility\u003c\/li\u003e\n\u003cli\u003eComes with Basic Reusable Spool\u003c\/li\u003e\n\u003cli\u003eDiameter: 1.75mm +\/- 0.03mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eCautions for Use\u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e0.2 mm Nozzle Not Compatible\u003c\/li\u003e\n\u003cli\u003eStainless Steel Nozzle Not Recommended\u003c\/li\u003e\n\u003cli\u003eDry before Use for the Highest Print Quality\u003c\/li\u003e\n\u003cli\u003eAMS Compatible\u003c\/li\u003e\n\u003cli\u003eAMS lite\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eNOT\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCompatible\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_tpc-ic\"\u003e\n\u003cdiv class=\"pct_t-p\"\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003eLess clumping and stringing\u003c\/h2\u003e\n\u003cp class=\"pct_p\"\u003eBambu PETG-CF is improved with a modified formula that specifically addresses the issue of clumping and sticking to nozzle during PETG printing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_ic\"\u003e\u003cimg alt=\"petg-cf\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0651\/1555\/4032\/files\/petg-1.png?v=16780913210\" class=\"pct_i\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_tpc-ic\"\u003e\n\u003cdiv class=\"pct_t-p\"\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003ePremium print surface\u003c\/h2\u003e\n\u003cp class=\"pct_p\"\u003eCarbon fiber brings advanced texture to the print surface, while retaining the shine of PETG itself.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_ic\"\u003e\u003cimg alt=\"petg-cf\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0573\/5320\/7868\/files\/2_ee9161ae-0f23-4111-aeb5-4241f6776a46.png?v=1690438956\" class=\"pct_i\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_t-stpcic\"\u003e\n\u003cdiv class=\"pct_stpc-ic\"\u003e\n\u003cdiv class=\"pct_st-p\"\u003e\n\u003ch3 class=\"pct_st\"\u003eCarbon Fiber Texture\u003c\/h3\u003e\n\u003cp class=\"pct_p\"\u003eCarbon fiber brings soft reflection, minimal layer lines and a unique delicate texture.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_ic\"\u003e\u003cimg class=\"pct_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0573\/5320\/7868\/files\/4_615d5a1f-be76-4343-be18-9327355320ae.png?v=1690423973\" alt=\"petg-cf\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"pct_stpc-ic\"\u003e\n\u003cdiv class=\"pct_st-p\"\u003e\n\u003ch3 class=\"pct_st\"\u003eShiny Finish\u003c\/h3\u003e\n\u003cp class=\"pct_p\"\u003eDifferent from PLA-CF's matte finish, PETG-CF offers a shiny finish and thus one more choice.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_ic\"\u003e\u003cimg alt=\"petg cf\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0651\/1555\/4032\/files\/3_1d41599f-369e-4670-ae5c-0f3aab9f5670.png?v=1691395052\" class=\"pct_i\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_tpc-ic\"\u003e\n\u003cdiv class=\"pct_t-p\"\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003eStrong XY Performance\u003c\/h2\u003e\n\u003cp class=\"pct_p\"\u003eThe addition of carbon fiber also significantly enhances the XY strength of PETG without sacrificing layer bonding.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_ic\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0584\/7236\/6216\/files\/PETG-CF-DATA.jpg?v=1693881215\" class=\"pct_i\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_st-tbc\"\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003eParameters Comparison\u003c\/h2\u003e\n\u003cdiv class=\"pct_tbc\"\u003e\n\u003cp\u003e\u003cspan\u003eLearn more different filaments comparison on \u003ca href=\"https:\/\/bambulab.com\/en\/filament-guide\" title=\"Bambu Filaments Guide\" target=\"_blank\"\u003eBambu Filament Guide \u0026gt;\u0026gt;\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"TableWrapper\"\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003cthead class=\"pct_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003ePLA-CF\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003ePETG-CF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003ePrice\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e$44.99 CAD\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e$44.99 CAD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eFilament Type\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eCarbon Fiber Infill\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eCarbon Fiber Infill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eHotend Compatibility\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eHardened Steel (0.4, 0.6, 0.8 mm)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eHardened Steel (0.4, 0.6, 0.8 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBuild Plate Compatibility\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eCool Plate, High Temperature Plate, Textured PEI Plate\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eEngineering Plate, High Temperature Plate, Textuerd PEI Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eAMS Compatibility\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eYes\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eSurface\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eMatte\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eShiny\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003ePrint Speed\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u0026lt;250 mm\/s\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u0026lt;200 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eToughness (Impact Strength - XY)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e23.2 kJ\/m²\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e41.2 kJ\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eStrength (Bending Strength - XY)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e89 MPa\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e70 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eStiffness (Bending Modulus - XY)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e3950 MPa\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e2910 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eLayer Adhesion (Impact Strength - Z)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e7.8 kJ\/m²\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e10.7 kJ\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eHeat Resistant（HDT, 0.45 MPa）\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e55 °C\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e74 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_tpc-ic\"\u003e\n\u003cdiv class=\"pct_t-p\"\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003eHigh Flexibility\u003c\/h2\u003e\n\u003cp class=\"pct_p\"\u003eCompared to other carbon fiber materials, Bambu PETG-CF exhibits exceptional toughness\u003c\/p\u003e\n\u003cp class=\"pct_p\"\u003eand is less prone to fracture under external stress and impact.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_ic\"\u003e\u003cimg class=\"pct_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0573\/5320\/7868\/files\/PETG-CF_VS_PLA-CF.png\" alt=\"图片加载失败文案\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_st-tbc\"\u003e\n\u003ch2 class=\"pct_t\"\u003eAccessory Compatibility\u003c\/h2\u003e\n\u003cdiv class=\"pct_tbc\"\u003e\n\u003cdiv class=\"TableWrapper\"\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003cthead class=\"pct_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eRecommended\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eNot Recommended\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eBuild Plate\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eEngineering Plate, High Temperature Plate or Textured PEI Plate\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eCool Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eHotend\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eHardened Steel Nozzle (0.4 \/ 0.6 \/ 0.8 mm)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eStainless Steel Nozzle (0.2 \/ 0.4 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eGlue\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eBambu Liquid Glue\u003cbr\u003eGlue Stick\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\/\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_st-tbc\"\u003e\n\u003ch3 class=\"pct_st\"\u003ePETG-CF Hex Code Table\u003c\/h3\u003e\n\u003cdiv class=\"pct_tbc\"\u003e\n\u003cdiv class=\"TableWrapper\"\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003cthead class=\"pct_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"pct_td\"\u003eColor\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eHex Code\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eDisplay\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBrick Red\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e#9f332a\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eViolet Purple\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e#583061\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eIndigo Blue\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e#324585\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eMalachite Green\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e#16b08e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBlack\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e#000000\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eTitan Gray\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e#565656\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_tpc-ic\"\u003e\n\u003cdiv class=\"pct_t-p\"\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003eRFID for Intelligent Printing\u003c\/h2\u003e\n\u003cp class=\"pct_p\"\u003eAll printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).\u003c\/p\u003e\n\u003cp class=\"pct_p\"\u003eLoad and print! No more tedious setting steps.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_ic\"\u003e\u003cimg class=\"pct_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0611\/4036\/9460\/files\/RFID_70c381bd-0270-4d8b-b778-51aa52b6971b.gif?v=1677494900\" alt=\"rfid\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_table-row\"\u003e\n\u003cdiv class=\"pct_tbc\"\u003e\n\u003cdiv class=\"TableWrapper\"\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003cthead class=\"pct_th\"\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\" class=\"pct_td\"\u003eRecommended Printing Settings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eDrying Settings (Blast Drying Oven)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e65 °C，8 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003ePrinting and Keeping Container's Humidity\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u0026lt; 20% RH (Sealed, with Desiccant)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eNozzle Temperature\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e240 - 270 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBed Temperature (with Glue)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e65 - 75 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003ePrinting Speed\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u0026lt; 200 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_tbc\"\u003e\n\u003cdiv class=\"TableWrapper\"\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003cthead class=\"pct_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"pct_td\"\u003ePhysical Properties\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eDensity\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e1.25 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eVicat Softening Temperature\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e85 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eHeat Deflection Temperature\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e74 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eMelting Temperature\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e225 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eMelt Index\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e19.3 ± 2.4 g\/10 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_tbc\"\u003e\n\u003cdiv class=\"TableWrapper\"\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003cthead class=\"pct_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"pct_td\"\u003eMechanical Properties\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eTensile Strength\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e35 ± 5 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBreaking Elongation Rate\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e10.4 ± 0.6 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBending Modulus\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e2910 ± 260 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBending Strength\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e70 ± 5 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eImpact Strength\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e41.2 ± 2.6 kJ\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp class=\"pct_hide-in-mobile\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_t-icpc\"\u003e\n\u003ch2 class=\"pct_t\"\u003eDownloads\u003c\/h2\u003e\n\u003cbr\u003e\n\u003cdiv class=\"pct_p pct_i-t-text pct_padding-in-mobile pct_flex-pc\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0584\/7236\/6216\/files\/Bambu_PETG-CF_Technical_Data_Sheet_V2.pdf\" title=\"Bambu PETG-CF TDS\" target=\"_blank\"\u003e\u003cspan class=\"pct_pdf-icon\"\u003e\u003cimg alt=\"pdf\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0573\/5320\/7868\/files\/PDF.png\"\u003e\u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eFilament TDS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0584\/7236\/6216\/files\/Bambu_PETG-CF_MSDS.pdf\" title=\"Bambu PETG-CF MSDS\" target=\"_blank\"\u003e\u003cspan class=\"pct_pdf-icon\"\u003e\u003cimg alt=\"pdf\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0573\/5320\/7868\/files\/PDF.png\"\u003e\u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eFilament MSDS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0573\/5320\/7868\/files\/Bambu_PETG-CF_RoHS.pdf?v=1693451664\" title=\"Bambu PETG-CF RoHS\" target=\"_blank\"\u003e\u003cspan class=\"pct_pdf-icon\"\u003e\u003cimg alt=\"pdf\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0573\/5320\/7868\/files\/PDF.png\"\u003e\u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eFilament RoHS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_t-stpc\"\u003e\n\u003cdiv class=\"pct_st-p\"\u003e\n\u003ch3 class=\"pct_st\"\u003ePrinting Tips\u003c\/h3\u003e\n\u003cp class=\"pct_p\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e• \u003c\/span\u003eBambu PETG-CF needs proper drying before printing. Drying conditions: 65℃ for 8 hrs. Store in a dry environment after use. Dry before use if the material absorbs moisture. For more details please refer to:\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/wiki.bambulab.com\/en\/filament-acc\/filament\/dry-filament\" title=\"Bambu filament drying cover\" target=\"_blank\"\u003e\u003cspan\u003e\u003cstrong\u003eFilament drying instructions\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eon WIKI.\u003c\/p\u003e\n\u003cp class=\"pct_p\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e• \u003c\/span\u003eTo get stronger Z-adhesion, please set a higher infill density, and do not use an open-frame printer or set too large fan percentages to avoid over cooling.\u003c\/p\u003e\n\u003cp class=\"pct_p\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e• \u003c\/span\u003eTo get shinier looks, set lower speeds and relatively higher temperatures.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_t-icpc\"\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cdiv class=\"pct_icpc pct_grad-2-pc pct_grad-2-mobile\"\u003e\n\u003cdiv class=\"pct_ic-p\"\u003e\n\u003cdiv class=\"pct_ic\"\u003e\u003cimg class=\"pct_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0611\/4036\/9460\/files\/9.png?v=1678074630\" alt=\"图片加载失败文案\"\u003e\u003c\/div\u003e\n\u003cp class=\"pct_p\"\u003eFilament with Spool*1 \u0026amp; Desiccant*1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_ic-p\"\u003e\n\u003cdiv class=\"pct_ic\"\u003e\u003cimg alt=\"图片加载失败文案\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0611\/4036\/9460\/files\/11_657f3b34-b894-475e-9052-dcfafb17496d.png?v=1678074630\" class=\"pct_i\"\u003e\u003c\/div\u003e\n\u003cp class=\"pct_p\"\u003ePackage*1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2024-11-25T12:19:56-05:00","created_at":"2024-11-25T12:07:23-05:00","vendor":"Bambu Lab","type":"bambu Lab Filaments","tags":["1.75mm","Bambu Lab","Filaments","PetG-CF","temp","X1C","X1CC","X1E"],"price":4499,"price_min":4499,"price_max":4499,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45942213476588,"title":"Black","option1":"Black","option2":null,"option3":null,"sku":"BBL-FLM-PTG-CF0-BLK","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Bambu Lab PetG-CF (Carbon Fiber Reinforced PetG) 1Kg on spool - Black","public_title":"Black","options":["Black"],"price":4499,"weight":1400,"compare_at_price":null,"inventory_quantity":-1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6975337032243","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_PetG-CF__Carbon_Fiber_Reinforced_PetG__1Kg_on_spool_Product_Image.webp?v=1739810409"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_PetG-CF__Carbon_Fiber_Reinforced_PetG__1Kg_on_spool_Product_Image.webp?v=1739810409","options":["Color"],"media":[{"alt":"Bambu Lab PetG-CF (Carbon Fiber Reinforced PetG) 1Kg on spool - Voxel Factory -3D printer- Imprimante 3D","id":34561477083372,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_PetG-CF__Carbon_Fiber_Reinforced_PetG__1Kg_on_spool_Product_Image.webp?v=1739810409"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_PetG-CF__Carbon_Fiber_Reinforced_PetG__1Kg_on_spool_Product_Image.webp?v=1739810409","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"pct_t-p\"\u003e\n\u003ch2 class=\"pct_t\"\u003eBambu PETG-CF\u003c\/h2\u003e\n\u003cp class=\"pct_p\"\u003eBambu PETG-CF is a composite material consisting of PETG and carbon fiber. The new formula greatly improved printing quality by reducing clumping compared to traditional PETG. With the addition of carbon fiber, Bambu PETG-CF offers improved strength while maintaining good toughness and a shiny look. It is an ideal material for drone parts, racing models, and various functional parts that require both high performance, especially impact strength, and a sleek appearance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cb\u003eProduct Features\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLess Clumping and Stringing\u003c\/li\u003e\n\u003cli\u003ePremium Print Surface\u003c\/li\u003e\n\u003cli\u003eImproved Mechanical Properties \u0026amp; High Flexibility\u003c\/li\u003e\n\u003cli\u003eComes with Basic Reusable Spool\u003c\/li\u003e\n\u003cli\u003eDiameter: 1.75mm +\/- 0.03mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eCautions for Use\u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e0.2 mm Nozzle Not Compatible\u003c\/li\u003e\n\u003cli\u003eStainless Steel Nozzle Not Recommended\u003c\/li\u003e\n\u003cli\u003eDry before Use for the Highest Print Quality\u003c\/li\u003e\n\u003cli\u003eAMS Compatible\u003c\/li\u003e\n\u003cli\u003eAMS lite\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eNOT\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCompatible\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_tpc-ic\"\u003e\n\u003cdiv class=\"pct_t-p\"\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003eLess clumping and stringing\u003c\/h2\u003e\n\u003cp class=\"pct_p\"\u003eBambu PETG-CF is improved with a modified formula that specifically addresses the issue of clumping and sticking to nozzle during PETG printing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_ic\"\u003e\u003cimg alt=\"petg-cf\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0651\/1555\/4032\/files\/petg-1.png?v=16780913210\" class=\"pct_i\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_tpc-ic\"\u003e\n\u003cdiv class=\"pct_t-p\"\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003ePremium print surface\u003c\/h2\u003e\n\u003cp class=\"pct_p\"\u003eCarbon fiber brings advanced texture to the print surface, while retaining the shine of PETG itself.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_ic\"\u003e\u003cimg alt=\"petg-cf\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0573\/5320\/7868\/files\/2_ee9161ae-0f23-4111-aeb5-4241f6776a46.png?v=1690438956\" class=\"pct_i\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_t-stpcic\"\u003e\n\u003cdiv class=\"pct_stpc-ic\"\u003e\n\u003cdiv class=\"pct_st-p\"\u003e\n\u003ch3 class=\"pct_st\"\u003eCarbon Fiber Texture\u003c\/h3\u003e\n\u003cp class=\"pct_p\"\u003eCarbon fiber brings soft reflection, minimal layer lines and a unique delicate texture.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_ic\"\u003e\u003cimg class=\"pct_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0573\/5320\/7868\/files\/4_615d5a1f-be76-4343-be18-9327355320ae.png?v=1690423973\" alt=\"petg-cf\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"pct_stpc-ic\"\u003e\n\u003cdiv class=\"pct_st-p\"\u003e\n\u003ch3 class=\"pct_st\"\u003eShiny Finish\u003c\/h3\u003e\n\u003cp class=\"pct_p\"\u003eDifferent from PLA-CF's matte finish, PETG-CF offers a shiny finish and thus one more choice.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_ic\"\u003e\u003cimg alt=\"petg cf\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0651\/1555\/4032\/files\/3_1d41599f-369e-4670-ae5c-0f3aab9f5670.png?v=1691395052\" class=\"pct_i\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_tpc-ic\"\u003e\n\u003cdiv class=\"pct_t-p\"\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003eStrong XY Performance\u003c\/h2\u003e\n\u003cp class=\"pct_p\"\u003eThe addition of carbon fiber also significantly enhances the XY strength of PETG without sacrificing layer bonding.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_ic\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0584\/7236\/6216\/files\/PETG-CF-DATA.jpg?v=1693881215\" class=\"pct_i\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_st-tbc\"\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003eParameters Comparison\u003c\/h2\u003e\n\u003cdiv class=\"pct_tbc\"\u003e\n\u003cp\u003e\u003cspan\u003eLearn more different filaments comparison on \u003ca href=\"https:\/\/bambulab.com\/en\/filament-guide\" title=\"Bambu Filaments Guide\" target=\"_blank\"\u003eBambu Filament Guide \u0026gt;\u0026gt;\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"TableWrapper\"\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003cthead class=\"pct_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003ePLA-CF\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003ePETG-CF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003ePrice\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e$44.99 CAD\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e$44.99 CAD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eFilament Type\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eCarbon Fiber Infill\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eCarbon Fiber Infill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eHotend Compatibility\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eHardened Steel (0.4, 0.6, 0.8 mm)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eHardened Steel (0.4, 0.6, 0.8 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBuild Plate Compatibility\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eCool Plate, High Temperature Plate, Textured PEI Plate\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eEngineering Plate, High Temperature Plate, Textuerd PEI Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eAMS Compatibility\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eYes\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eSurface\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eMatte\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eShiny\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003ePrint Speed\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u0026lt;250 mm\/s\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u0026lt;200 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eToughness (Impact Strength - XY)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e23.2 kJ\/m²\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e41.2 kJ\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eStrength (Bending Strength - XY)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e89 MPa\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e70 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eStiffness (Bending Modulus - XY)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e3950 MPa\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e2910 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eLayer Adhesion (Impact Strength - Z)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e7.8 kJ\/m²\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e10.7 kJ\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eHeat Resistant（HDT, 0.45 MPa）\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e55 °C\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e74 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_tpc-ic\"\u003e\n\u003cdiv class=\"pct_t-p\"\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003eHigh Flexibility\u003c\/h2\u003e\n\u003cp class=\"pct_p\"\u003eCompared to other carbon fiber materials, Bambu PETG-CF exhibits exceptional toughness\u003c\/p\u003e\n\u003cp class=\"pct_p\"\u003eand is less prone to fracture under external stress and impact.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_ic\"\u003e\u003cimg class=\"pct_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0573\/5320\/7868\/files\/PETG-CF_VS_PLA-CF.png\" alt=\"图片加载失败文案\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_st-tbc\"\u003e\n\u003ch2 class=\"pct_t\"\u003eAccessory Compatibility\u003c\/h2\u003e\n\u003cdiv class=\"pct_tbc\"\u003e\n\u003cdiv class=\"TableWrapper\"\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003cthead class=\"pct_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eRecommended\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eNot Recommended\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eBuild Plate\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eEngineering Plate, High Temperature Plate or Textured PEI Plate\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eCool Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eHotend\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eHardened Steel Nozzle (0.4 \/ 0.6 \/ 0.8 mm)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eStainless Steel Nozzle (0.2 \/ 0.4 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eGlue\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eBambu Liquid Glue\u003cbr\u003eGlue Stick\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\/\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_st-tbc\"\u003e\n\u003ch3 class=\"pct_st\"\u003ePETG-CF Hex Code Table\u003c\/h3\u003e\n\u003cdiv class=\"pct_tbc\"\u003e\n\u003cdiv class=\"TableWrapper\"\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003cthead class=\"pct_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"pct_td\"\u003eColor\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eHex Code\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eDisplay\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBrick Red\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e#9f332a\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eViolet Purple\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e#583061\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eIndigo Blue\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e#324585\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eMalachite Green\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e#16b08e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBlack\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e#000000\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eTitan Gray\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e#565656\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_tpc-ic\"\u003e\n\u003cdiv class=\"pct_t-p\"\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003eRFID for Intelligent Printing\u003c\/h2\u003e\n\u003cp class=\"pct_p\"\u003eAll printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).\u003c\/p\u003e\n\u003cp class=\"pct_p\"\u003eLoad and print! No more tedious setting steps.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_ic\"\u003e\u003cimg class=\"pct_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0611\/4036\/9460\/files\/RFID_70c381bd-0270-4d8b-b778-51aa52b6971b.gif?v=1677494900\" alt=\"rfid\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_table-row\"\u003e\n\u003cdiv class=\"pct_tbc\"\u003e\n\u003cdiv class=\"TableWrapper\"\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003cthead class=\"pct_th\"\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\" class=\"pct_td\"\u003eRecommended Printing Settings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eDrying Settings (Blast Drying Oven)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e65 °C，8 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003ePrinting and Keeping Container's Humidity\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u0026lt; 20% RH (Sealed, with Desiccant)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eNozzle Temperature\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e240 - 270 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBed Temperature (with Glue)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e65 - 75 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003ePrinting Speed\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u0026lt; 200 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_tbc\"\u003e\n\u003cdiv class=\"TableWrapper\"\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003cthead class=\"pct_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"pct_td\"\u003ePhysical Properties\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eDensity\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e1.25 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eVicat Softening Temperature\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e85 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eHeat Deflection Temperature\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e74 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eMelting Temperature\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e225 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eMelt Index\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e19.3 ± 2.4 g\/10 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_tbc\"\u003e\n\u003cdiv class=\"TableWrapper\"\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003cthead class=\"pct_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"pct_td\"\u003eMechanical Properties\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eTensile Strength\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e35 ± 5 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBreaking Elongation Rate\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e10.4 ± 0.6 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBending Modulus\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e2910 ± 260 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eBending Strength\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e70 ± 5 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eImpact Strength\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e41.2 ± 2.6 kJ\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp class=\"pct_hide-in-mobile\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_t-icpc\"\u003e\n\u003ch2 class=\"pct_t\"\u003eDownloads\u003c\/h2\u003e\n\u003cbr\u003e\n\u003cdiv class=\"pct_p pct_i-t-text pct_padding-in-mobile pct_flex-pc\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0584\/7236\/6216\/files\/Bambu_PETG-CF_Technical_Data_Sheet_V2.pdf\" title=\"Bambu PETG-CF TDS\" target=\"_blank\"\u003e\u003cspan class=\"pct_pdf-icon\"\u003e\u003cimg alt=\"pdf\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0573\/5320\/7868\/files\/PDF.png\"\u003e\u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eFilament TDS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0584\/7236\/6216\/files\/Bambu_PETG-CF_MSDS.pdf\" title=\"Bambu PETG-CF MSDS\" target=\"_blank\"\u003e\u003cspan class=\"pct_pdf-icon\"\u003e\u003cimg alt=\"pdf\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0573\/5320\/7868\/files\/PDF.png\"\u003e\u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eFilament MSDS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0573\/5320\/7868\/files\/Bambu_PETG-CF_RoHS.pdf?v=1693451664\" title=\"Bambu PETG-CF RoHS\" target=\"_blank\"\u003e\u003cspan class=\"pct_pdf-icon\"\u003e\u003cimg alt=\"pdf\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0573\/5320\/7868\/files\/PDF.png\"\u003e\u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eFilament RoHS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_t-stpc\"\u003e\n\u003cdiv class=\"pct_st-p\"\u003e\n\u003ch3 class=\"pct_st\"\u003ePrinting Tips\u003c\/h3\u003e\n\u003cp class=\"pct_p\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e• \u003c\/span\u003eBambu PETG-CF needs proper drying before printing. Drying conditions: 65℃ for 8 hrs. Store in a dry environment after use. Dry before use if the material absorbs moisture. For more details please refer to:\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/wiki.bambulab.com\/en\/filament-acc\/filament\/dry-filament\" title=\"Bambu filament drying cover\" target=\"_blank\"\u003e\u003cspan\u003e\u003cstrong\u003eFilament drying instructions\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eon WIKI.\u003c\/p\u003e\n\u003cp class=\"pct_p\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e• \u003c\/span\u003eTo get stronger Z-adhesion, please set a higher infill density, and do not use an open-frame printer or set too large fan percentages to avoid over cooling.\u003c\/p\u003e\n\u003cp class=\"pct_p\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e• \u003c\/span\u003eTo get shinier looks, set lower speeds and relatively higher temperatures.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_t-icpc\"\u003e\n\u003ch2 class=\"pct_t pct_st\"\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cdiv class=\"pct_icpc pct_grad-2-pc pct_grad-2-mobile\"\u003e\n\u003cdiv class=\"pct_ic-p\"\u003e\n\u003cdiv class=\"pct_ic\"\u003e\u003cimg class=\"pct_i\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0611\/4036\/9460\/files\/9.png?v=1678074630\" alt=\"图片加载失败文案\"\u003e\u003c\/div\u003e\n\u003cp class=\"pct_p\"\u003eFilament with Spool*1 \u0026amp; Desiccant*1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_ic-p\"\u003e\n\u003cdiv class=\"pct_ic\"\u003e\u003cimg alt=\"图片加载失败文案\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0611\/4036\/9460\/files\/11_657f3b34-b894-475e-9052-dcfafb17496d.png?v=1678074630\" class=\"pct_i\"\u003e\u003c\/div\u003e\n\u003cp class=\"pct_p\"\u003ePackage*1\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Bambu Lab PetG-CF (Carbon Fiber Reinforced PetG) 1Kg on spool
Produits Connexes
{"id":9392368156908,"title":"INDX Conversion Kit [CORE One\/+ \u0026 Gen2]","handle":"indx-conversion-kit-for-core-one","description":"\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003eThe INDX is an \u003cstrong\u003eextremely fast, highly efficient toolchanger system\u003c\/strong\u003e with up to eight independent toolheads that seamlessly integrates with your CORE One+ 3D printer. Each material gets its own dedicated path, so you can combine rigid and flexible parts, use easy-to-remove or dissolvable supports, \u003cstrong\u003eswitch nozzle sizes in the same print,\u003c\/strong\u003e and \u003cstrong\u003eprint multi-color models without throwing half of the spool to waste.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003ch2\u003eWhat can you achieve with 8 nozzles?\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMulti-material goes beyond color. It lets you build functional parts that combine properties no single filament can deliver.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMulti‑color without the usual mess\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eNo wipe tower, no piles of plastic around the printer\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/b917b2ac-2d04-43ff-b455-ba8ebe972d43.avif?v=1787599190\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSupports that are easier to remove\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eWater-soluble or break-away organic supports\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/40779616-8796-404c-af15-bc7adbd180e2.avif?v=1787599228\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRigid + Flexible in One Print\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAdd a rubber-like grip to functional prints\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/90cf5e07-dd2d-4d97-af5b-6aad1c42ff9b.avif?v=1787599263\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDifferent nozzle sizes always at the ready\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eHave all your favorite materials always loaded\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/1c3e5c2c-db11-46af-ba38-70dce4833c19.avif?v=1787599291\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eLightning-Fast Toolchanger\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eKeep all the features of your CORE One+, like high-speed printing and a smart ventilation system, and give it a massive boost with this extremely fast tool-changing system. The INDX toolchanger achieves unbeatable results thanks to rapid induction heating of its nozzles. It doesn't waste time on wipe towers.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOnly with the INDX, you'll get beautiful, multi-material 3D prints faster than ever before - and with all the benefits only a toolchanger can provide.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%; height: auto;\" autoplay=\"autoplay\" controls=\"controls\" muted=\"\" loop=\"loop\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/1e14b35b01904edd8bd3bac319e3bfbf.mp4\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReal Performance Metric\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003eTrue Toolchange Time: ~12 seconds per change\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWe measure toolchange time from the last extrusion on one material to the first extrusion on the next, on the model itself. This avoids inflated and misleading numbers based on partial steps. The ~12 seconds per change for PLA is the time between when one nozzle leaves the printed part until the second nozzle starts printing.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eThree Major Benefits for Better 3D Printing\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo Wipe Towers \/ Purge Blocks\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eNearly all multi-material systems place a block in the corner of your print sheet where the nozzle purges excess filament. The INDX doesn't do that. You can use up to 248×205×270 mm for your prints!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/29b2b85d-dcae-45d8-8d7c-61ed776d4f19.avif?v=1787666093\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoors Closed, at All Times\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eMany enclosed printers require you to keep the chamber door open when printing PLA or PETG, eliminating the benefits of the closed chamber. The INDX retains the unique ventilation system, so you can keep the doors closed.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/910dd9df-cc66-4a5f-a006-bdb92748bf7c.avif?v=1787666150\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eThe Innovations that Drive the INDX\u003c\/h2\u003e\n\u003ch3\u003eOnly one active component - less complexity, lower price, easier to use.\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSmart Active Head\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003eFast Induction Heating\u003c\/h4\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe INDX Smart Head contains an induction coil - just like an induction cooktop. When it picks up a toolhead, it generates a high-frequency magnetic field that heats the nozzle from cold to printing temperature in seconds. When the tool is parked, it cools rapidly. No oozing, no stringing from idle nozzles.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/1a881070-cf2a-4a29-9f2d-2eba6b92581f.avif?v=1787667143\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHIGH-FLOW NOZZLES\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003ePassive Toolheads\u003c\/h4\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eUsing passive tools without any electronics is a massive advantage: they are less complex and more reliable. Adding a fifth, sixth, or eighth tool means adding a nozzle and a parking dock - not another full print head. By default, the INDX comes with high-flow 0.4 mm nozzles.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/fb1aeb95-3355-481f-b616-aca037f7d655.avif?v=1787667193\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Dynamic Extruder\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003eSelf‑adjusting grip for different materials\u003c\/h4\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSoft materials need a gentler grip than rigid, fiber-filled ones. The INDX features a unique mechanism that adjusts the drive gear tension automatically, so you can move from TPU to rigid engineering filaments without stopping to retune the extruder.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%; height: auto;\" autoplay=\"autoplay\" controls=\"controls\" muted=\"\" loop=\"loop\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/42075a690cd044b3bc93acca5d8a14a9.mp4\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e8 materials conveniently loaded\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003eAlways Ready to Print\u003c\/h4\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eLoad eight filaments, install different nozzle sizes from 0.25 to 0.8. When you start a print, everything's already ready and loaded. Just pick the right tool. If you like to use different filaments and nozzles, and hate constantly swapping everything around, the INDX is the solution for you.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/2ec872b6-1fd2-4219-9cf7-e843f0adc713.avif?v=1787667445\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003cthead class=\"voxel-product-description-table-head\"\u003e\n\u003ctr\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003eParameter\u003c\/th\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSystem Type\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePassive toolchanger with induction-heated nozzles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eMax Tools\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e8 on CORE One\/+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eMax Nozzle Temperature\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e300 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eFilament Diameter\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eCompatible Nozzle Sizes\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e0.25, 0.4, 0.5, 0.6, 0.8, 1.0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eNozzle Type\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eHigh-flow (CHT), nitrocarburized steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eHeating System\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eContactless induction coil (on Smart Head)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eTemperature Sensing\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eWireless and contactless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eExtrusion System\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eDynamic Dual Drive (DX) auto-adjusting grip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eTool Coupling\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eMechanical Maxwell coupling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eBuild Volume Impact\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e2mm reduction in X-axis, 15 mm reduction in Y-axis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eBuild Volume With INDX Installed\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e248×205×270mm (X×Y×Z)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eCompatible Printer\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePrusa CORE One\/+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSupported Materials\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePLA, PETG, ASA, ABS, PC, PA, TPU, PVA, BVOH, and other non-abrasive materials - up to 300°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eWhat's In the Box\u003c\/h5\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003cthead class=\"voxel-product-description-table-head\"\u003e\n\u003ctr\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003eItem\u003c\/th\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003ePrusa CORE One+\u003c\/th\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003ePrusa CORE One+ (Gen 2)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eINDX Head\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eIncluded\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eINDX Tools\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e4× or 8×, depending on selected version\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e4× or 8×, depending on selected version\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePlastic Parts\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eIncluded\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eTop Cover\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eIncluded\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSpoolholders\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e4× or 8×, depending on selected version\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e4× or 8×, depending on selected version\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eFasteners \u0026amp; Other Accessories\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eIncluded\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eNozzle Cleaning System\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eAdvanced nozzle wiper made for induction-heated nozzles\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eAdvanced nozzle wiper made for induction-heated nozzles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eGT 1.5 Belts And Matching Pulleys\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eIncluded - smoother surfaces\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eNot included - already present on the printer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eThermal Expansion Joints\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eIncluded - faster print starts\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eNot included - already installed on the printer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2026-08-25T10:17:51-04:00","created_at":"2026-08-24T12:17:54-04:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":["CORE One\/+"],"price":106900,"price_min":106900,"price_max":149900,"available":false,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":48227642179820,"title":"CORE One\/+ \/ 4 toolheads","option1":"CORE One\/+","option2":"4 toolheads","option3":null,"sku":"PRU-CKT-INDX-4TL-COP","requires_shipping":true,"taxable":true,"featured_image":{"id":47218737316076,"product_id":9392368156908,"position":2,"created_at":"2026-08-24T14:09:29-04:00","updated_at":"2026-08-24T14:09:30-04:00","alt":"INDX Conversion Kit CORE One\/+ - 4 toolheads","width":1400,"height":1050,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_plus_4_toolheads_product_picture.webp?v=1787594970","variant_ids":[48227642179820]},"available":false,"name":"INDX Conversion Kit [CORE One\/+ \u0026 Gen2] - CORE One\/+ \/ 4 toolheads","public_title":"CORE One\/+ \/ 4 toolheads","options":["CORE One\/+","4 toolheads"],"price":113900,"weight":10000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"featured_media":{"alt":"INDX Conversion Kit CORE One\/+ - 4 toolheads","id":37915989770476,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_plus_4_toolheads_product_picture.webp?v=1787594970"}},"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":48227642212588,"title":"CORE One\/+ \/ 8 toolheads","option1":"CORE One\/+","option2":"8 toolheads","option3":null,"sku":"PRU-CKT-INDX-8TL-COP","requires_shipping":true,"taxable":true,"featured_image":{"id":47218737447148,"product_id":9392368156908,"position":3,"created_at":"2026-08-24T14:09:41-04:00","updated_at":"2026-08-24T14:09:43-04:00","alt":null,"width":1400,"height":1050,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_plus_8_toolheads_product_picture.webp?v=1787594983","variant_ids":[48227642212588]},"available":false,"name":"INDX Conversion Kit [CORE One\/+ \u0026 Gen2] - CORE One\/+ \/ 8 toolheads","public_title":"CORE One\/+ \/ 8 toolheads","options":["CORE One\/+","8 toolheads"],"price":149900,"weight":11000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"featured_media":{"alt":null,"id":37915989901548,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_plus_8_toolheads_product_picture.webp?v=1787594983"}},"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":48227646570732,"title":"CORE One\/+ (Gen 2) \/ 4 toolheads","option1":"CORE One\/+ (Gen 2)","option2":"4 toolheads","option3":null,"sku":"PRU-CKT-INDX-4TL-CO2","requires_shipping":true,"taxable":true,"featured_image":{"id":47218737905900,"product_id":9392368156908,"position":4,"created_at":"2026-08-24T14:09:55-04:00","updated_at":"2026-08-24T14:09:56-04:00","alt":null,"width":1400,"height":1050,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_plus_Gen2_4_toolheads_product_picture.webp?v=1787594996","variant_ids":[48227646570732]},"available":false,"name":"INDX Conversion Kit [CORE One\/+ \u0026 Gen2] - CORE One\/+ (Gen 2) \/ 4 toolheads","public_title":"CORE One\/+ (Gen 2) \/ 4 toolheads","options":["CORE One\/+ (Gen 2)","4 toolheads"],"price":106900,"weight":10000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"featured_media":{"alt":null,"id":37915990360300,"position":4,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_plus_Gen2_4_toolheads_product_picture.webp?v=1787594996"}},"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":48227646603500,"title":"CORE One\/+ (Gen 2) \/ 8 toolheads","option1":"CORE One\/+ (Gen 2)","option2":"8 toolheads","option3":null,"sku":"PRU-CKT-INDX-8TL-CO2","requires_shipping":true,"taxable":true,"featured_image":{"id":47218737971436,"product_id":9392368156908,"position":5,"created_at":"2026-08-24T14:10:04-04:00","updated_at":"2026-08-24T14:10:05-04:00","alt":null,"width":1400,"height":1050,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_plus_Gen2_8_toolheads_product_picture.webp?v=1787595005","variant_ids":[48227646603500]},"available":false,"name":"INDX Conversion Kit [CORE One\/+ \u0026 Gen2] - CORE One\/+ (Gen 2) \/ 8 toolheads","public_title":"CORE One\/+ (Gen 2) \/ 8 toolheads","options":["CORE One\/+ (Gen 2)","8 toolheads"],"price":142900,"weight":11000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"featured_media":{"alt":null,"id":37915990425836,"position":5,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_plus_Gen2_8_toolheads_product_picture.webp?v=1787595005"}},"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_plus_thumbnail.webp?v=1787668705","\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_plus_4_toolheads_product_picture.webp?v=1787594970","\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_plus_8_toolheads_product_picture.webp?v=1787594983","\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_plus_Gen2_4_toolheads_product_picture.webp?v=1787594996","\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_plus_Gen2_8_toolheads_product_picture.webp?v=1787595005"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_plus_thumbnail.webp?v=1787668705","options":["Which printer do I have?","Number of INDX printer toolheads"],"media":[{"alt":"INDX Conversion Kit CORE One\/+ \u0026 Gen2 Thumbnail","id":37928115273964,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_plus_thumbnail.webp?v=1787668705"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_plus_thumbnail.webp?v=1787668705","width":1400},{"alt":"INDX Conversion Kit CORE One\/+ - 4 toolheads","id":37915989770476,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_plus_4_toolheads_product_picture.webp?v=1787594970"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_plus_4_toolheads_product_picture.webp?v=1787594970","width":1400},{"alt":null,"id":37915989901548,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_plus_8_toolheads_product_picture.webp?v=1787594983"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_plus_8_toolheads_product_picture.webp?v=1787594983","width":1400},{"alt":null,"id":37915990360300,"position":4,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_plus_Gen2_4_toolheads_product_picture.webp?v=1787594996"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_plus_Gen2_4_toolheads_product_picture.webp?v=1787594996","width":1400},{"alt":null,"id":37915990425836,"position":5,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_plus_Gen2_8_toolheads_product_picture.webp?v=1787595005"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_plus_Gen2_8_toolheads_product_picture.webp?v=1787595005","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003eThe INDX is an \u003cstrong\u003eextremely fast, highly efficient toolchanger system\u003c\/strong\u003e with up to eight independent toolheads that seamlessly integrates with your CORE One+ 3D printer. Each material gets its own dedicated path, so you can combine rigid and flexible parts, use easy-to-remove or dissolvable supports, \u003cstrong\u003eswitch nozzle sizes in the same print,\u003c\/strong\u003e and \u003cstrong\u003eprint multi-color models without throwing half of the spool to waste.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003ch2\u003eWhat can you achieve with 8 nozzles?\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMulti-material goes beyond color. It lets you build functional parts that combine properties no single filament can deliver.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMulti‑color without the usual mess\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eNo wipe tower, no piles of plastic around the printer\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/b917b2ac-2d04-43ff-b455-ba8ebe972d43.avif?v=1787599190\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSupports that are easier to remove\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eWater-soluble or break-away organic supports\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/40779616-8796-404c-af15-bc7adbd180e2.avif?v=1787599228\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRigid + Flexible in One Print\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAdd a rubber-like grip to functional prints\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/90cf5e07-dd2d-4d97-af5b-6aad1c42ff9b.avif?v=1787599263\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDifferent nozzle sizes always at the ready\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eHave all your favorite materials always loaded\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/1c3e5c2c-db11-46af-ba38-70dce4833c19.avif?v=1787599291\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eLightning-Fast Toolchanger\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eKeep all the features of your CORE One+, like high-speed printing and a smart ventilation system, and give it a massive boost with this extremely fast tool-changing system. The INDX toolchanger achieves unbeatable results thanks to rapid induction heating of its nozzles. It doesn't waste time on wipe towers.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOnly with the INDX, you'll get beautiful, multi-material 3D prints faster than ever before - and with all the benefits only a toolchanger can provide.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%; height: auto;\" autoplay=\"autoplay\" controls=\"controls\" muted=\"\" loop=\"loop\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/1e14b35b01904edd8bd3bac319e3bfbf.mp4\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReal Performance Metric\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003eTrue Toolchange Time: ~12 seconds per change\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWe measure toolchange time from the last extrusion on one material to the first extrusion on the next, on the model itself. This avoids inflated and misleading numbers based on partial steps. The ~12 seconds per change for PLA is the time between when one nozzle leaves the printed part until the second nozzle starts printing.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eThree Major Benefits for Better 3D Printing\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo Wipe Towers \/ Purge Blocks\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eNearly all multi-material systems place a block in the corner of your print sheet where the nozzle purges excess filament. The INDX doesn't do that. You can use up to 248×205×270 mm for your prints!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/29b2b85d-dcae-45d8-8d7c-61ed776d4f19.avif?v=1787666093\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoors Closed, at All Times\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eMany enclosed printers require you to keep the chamber door open when printing PLA or PETG, eliminating the benefits of the closed chamber. The INDX retains the unique ventilation system, so you can keep the doors closed.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/910dd9df-cc66-4a5f-a006-bdb92748bf7c.avif?v=1787666150\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eThe Innovations that Drive the INDX\u003c\/h2\u003e\n\u003ch3\u003eOnly one active component - less complexity, lower price, easier to use.\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSmart Active Head\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003eFast Induction Heating\u003c\/h4\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe INDX Smart Head contains an induction coil - just like an induction cooktop. When it picks up a toolhead, it generates a high-frequency magnetic field that heats the nozzle from cold to printing temperature in seconds. When the tool is parked, it cools rapidly. No oozing, no stringing from idle nozzles.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/1a881070-cf2a-4a29-9f2d-2eba6b92581f.avif?v=1787667143\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHIGH-FLOW NOZZLES\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003ePassive Toolheads\u003c\/h4\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eUsing passive tools without any electronics is a massive advantage: they are less complex and more reliable. Adding a fifth, sixth, or eighth tool means adding a nozzle and a parking dock - not another full print head. By default, the INDX comes with high-flow 0.4 mm nozzles.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/fb1aeb95-3355-481f-b616-aca037f7d655.avif?v=1787667193\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Dynamic Extruder\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003eSelf‑adjusting grip for different materials\u003c\/h4\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSoft materials need a gentler grip than rigid, fiber-filled ones. The INDX features a unique mechanism that adjusts the drive gear tension automatically, so you can move from TPU to rigid engineering filaments without stopping to retune the extruder.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%; height: auto;\" autoplay=\"autoplay\" controls=\"controls\" muted=\"\" loop=\"loop\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/42075a690cd044b3bc93acca5d8a14a9.mp4\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e8 materials conveniently loaded\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003eAlways Ready to Print\u003c\/h4\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eLoad eight filaments, install different nozzle sizes from 0.25 to 0.8. When you start a print, everything's already ready and loaded. Just pick the right tool. If you like to use different filaments and nozzles, and hate constantly swapping everything around, the INDX is the solution for you.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/2ec872b6-1fd2-4219-9cf7-e843f0adc713.avif?v=1787667445\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003cthead class=\"voxel-product-description-table-head\"\u003e\n\u003ctr\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003eParameter\u003c\/th\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSystem Type\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePassive toolchanger with induction-heated nozzles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eMax Tools\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e8 on CORE One\/+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eMax Nozzle Temperature\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e300 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eFilament Diameter\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eCompatible Nozzle Sizes\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e0.25, 0.4, 0.5, 0.6, 0.8, 1.0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eNozzle Type\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eHigh-flow (CHT), nitrocarburized steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eHeating System\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eContactless induction coil (on Smart Head)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eTemperature Sensing\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eWireless and contactless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eExtrusion System\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eDynamic Dual Drive (DX) auto-adjusting grip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eTool Coupling\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eMechanical Maxwell coupling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eBuild Volume Impact\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e2mm reduction in X-axis, 15 mm reduction in Y-axis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eBuild Volume With INDX Installed\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e248×205×270mm (X×Y×Z)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eCompatible Printer\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePrusa CORE One\/+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSupported Materials\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePLA, PETG, ASA, ABS, PC, PA, TPU, PVA, BVOH, and other non-abrasive materials - up to 300°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eWhat's In the Box\u003c\/h5\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003cthead class=\"voxel-product-description-table-head\"\u003e\n\u003ctr\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003eItem\u003c\/th\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003ePrusa CORE One+\u003c\/th\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003ePrusa CORE One+ (Gen 2)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eINDX Head\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eIncluded\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eINDX Tools\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e4× or 8×, depending on selected version\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e4× or 8×, depending on selected version\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePlastic Parts\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eIncluded\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eTop Cover\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eIncluded\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSpoolholders\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e4× or 8×, depending on selected version\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e4× or 8×, depending on selected version\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eFasteners \u0026amp; Other Accessories\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eIncluded\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eNozzle Cleaning System\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eAdvanced nozzle wiper made for induction-heated nozzles\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eAdvanced nozzle wiper made for induction-heated nozzles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eGT 1.5 Belts And Matching Pulleys\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eIncluded - smoother surfaces\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eNot included - already present on the printer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eThermal Expansion Joints\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eIncluded - faster print starts\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eNot included - already installed on the printer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e"}
INDX Conversion Kit [CORE One/+ & Gen2]
$1,139.00
Summary The INDX is an extremely fast, highly efficient toolchanger system with up to eight independent toolheads that seamlessly integrates with your CORE One+ 3D printer. Each material gets its own dedicated path, so you can combine rigid and flexible parts, use easy-to-remove or dissolvable supports, switch nozzle sizes in the same print, and...
{"id":9312443662572,"title":"Denture Base Resin V2 1L (Form 4)","handle":"denture-base-resin-v2-1l-form-4b","description":"\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003eHigh-impact denture base material for lifelike, long-lasting prosthetics\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eDenture Base Resin V2 is a high-impact, Class II biocompatible material for producing durable, natural-looking dentures that exceed ISO standards. Three semi-translucent pink shades, broad workflow compatibility, and a streamlined post-processing protocol give dental professionals the confidence to guarantee their work for years of patient wear.\u003c\/p\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003ch4\u003eWhy Choose Denture Base v2 Resin\u003c\/h4\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eDenture Base v2 Resin enables dental professionals to 3D print durable, high-impact denture bases with lifelike aesthetics using a streamlined and validated process.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLong-Term Performance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eDeliver dentures with the toughness to stand up to everyday wear and accidental drops -- along with the compatibility to be relined with a range of hard and soft materials and repaired using standard repair methods -- giving dentists and lab technicians the confidence to guarantee their work for years of patient wear.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLifelike, Adaptive Aesthetics\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eProvide natural-looking gingiva in three shades — Original, Light, and Dark Pink — and optimal translucency that blends seamlessly with the patient's tissue.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStreamlined, Validated Process\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eReach the final denture in fewer steps without additional equipment – a 10-minute IPA wash, 20-minute post-cure, and no extra solvents – with the ease of an auto-dispense cartridge and the fully validated Formlabs ecosystem.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOpen, Flexible Workflow\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ePair with Formlabs Premium Teeth Resin and streamline denture assembly using the Denture Base V2 resin as a bonding agent — or stay flexible with full compatibility for milled, carded, or third-party 3D printed teeth and 3rd party bonding materials.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eApplications\u003c\/h4\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eDenture Base v2 Resin is expanding access to durable, lifelike digital dentures with a streamlined, validated, and cost-effective manufacturing solution.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eMaterial Properties\u003c\/h4\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDenture Base Resin V2\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\n\u003cp\u003e\u003cb\u003eFlexural Strength\u003c\/b\u003e\u003cbr\u003e67 MPa\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\n\u003cp\u003e\u003cb\u003eFlexural Modulus\u003c\/b\u003e\u003cbr\u003e2200 MPa\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\n\u003cp\u003e\u003cb\u003eMaximum Stress Intensity Factor\u003c\/b\u003e\u003cbr\u003e2.4 MPa.m1\/2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\n\u003cp\u003e\u003cb\u003eWork of Fracture\u003c\/b\u003e\u003cbr\u003e1000 J\/m2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca class=\"voxel-product-description-link\" rel=\"noopener\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/26011107-TDS-ENUS-0.pdf?v=1783975113\" target=\"_blank\"\u003eDownload Digital Dentures Technical Data Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e* Material properties may vary based on part geometry, print orientation, print settings, and temperature. Data for post-cured samples were measured on Type I tensile bars printed on a Form 4B printer with 100 μm Denture Base Resin V2 settings, washed in a Form Wash for 10 minutes in ≥99% Isopropyl Alcohol, and post-cured at 80°C for 30 minutes in a Form Cure L v1. Testing performed at NAMSA World Headquarters, OH, USA\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003ePost-Processing\u003c\/h4\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWashing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe foundational step in any SLA post-processing workflow is to remove excess resin on the surface of the parts through an alcohol wash. Please refer to the material's manufacturing guide\/IFU for washing instructions.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCuring\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFor biocompatible materials, post-curing is necessary to achieve the safety standards determined by regulatory agencies. Please follow the material’s manufacturing guide\/IFU for proper post-processing.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/2102513-IU-ENUS-0.pdf?v=1783976239\" class=\"voxel-product-description-link\" target=\"_blank\"\u003eInstructions for Use: Denture Base Resin V2\u003c\/a\u003e\u003c\/p\u003e","published_at":"2026-07-14T09:08:32-04:00","created_at":"2026-07-13T17:01:35-04:00","vendor":"Formlabs","type":"Résines Formlabs","tags":["Form 4B","Form 4BL"],"price":78650,"price_min":78650,"price_max":78650,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47939514532076,"title":"Light Pink (LP)","option1":"Light Pink (LP)","option2":null,"option3":null,"sku":"FLB-RSN-DBS-0V2-LPK","requires_shipping":true,"taxable":true,"featured_image":{"id":46764233883884,"product_id":9312443662572,"position":1,"created_at":"2026-07-13T17:40:16-04:00","updated_at":"2026-07-13T17:40:17-04:00","alt":"Denture Base Resin 1L (Form 4B) - Light Pink","width":1400,"height":1050,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Denture_Base_Resin_1L_Form_4B_Light_Pink_Product_Picture.webp?v=1783978817","variant_ids":[47939514532076]},"available":true,"name":"Denture Base Resin V2 1L (Form 4) - Light Pink (LP)","public_title":"Light Pink (LP)","options":["Light Pink (LP)"],"price":78650,"weight":1500,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":null,"featured_media":{"alt":"Denture Base Resin 1L (Form 4B) - Light Pink","id":37475615637740,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Denture_Base_Resin_1L_Form_4B_Light_Pink_Product_Picture.webp?v=1783978817"}},"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":47939514564844,"title":"Original Pink (OP)","option1":"Original Pink (OP)","option2":null,"option3":null,"sku":"FLB-RSN-DBS-0V2-OPK","requires_shipping":true,"taxable":true,"featured_image":{"id":46763892408556,"product_id":9312443662572,"position":2,"created_at":"2026-07-13T15:53:22-04:00","updated_at":"2026-07-13T15:53:24-04:00","alt":"Denture Base Resin 1L (Form 4B) - Original Pink","width":1400,"height":1050,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Denture_Base_Resin_1L_Form_4B_Product_Picture.webp?v=1783972404","variant_ids":[47939514564844]},"available":true,"name":"Denture Base Resin V2 1L (Form 4) - Original Pink (OP)","public_title":"Original Pink (OP)","options":["Original Pink (OP)"],"price":78650,"weight":1500,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":null,"featured_media":{"alt":"Denture Base Resin 1L (Form 4B) - Original Pink","id":37475275669740,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Denture_Base_Resin_1L_Form_4B_Product_Picture.webp?v=1783972404"}},"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":47939514597612,"title":"Dark Pink (DP)","option1":"Dark Pink (DP)","option2":null,"option3":null,"sku":"FLB-RSN-DBS-0V2-DPK","requires_shipping":true,"taxable":true,"featured_image":{"id":46764233916652,"product_id":9312443662572,"position":3,"created_at":"2026-07-13T17:40:16-04:00","updated_at":"2026-07-13T17:40:17-04:00","alt":"Denture Base Resin 1L (Form 4B) Dark Pink","width":1400,"height":1050,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Denture_Base_Resin_1L_Form_4B_Dark_Pink_Product_Picture.webp?v=1783978817","variant_ids":[47939514597612]},"available":true,"name":"Denture Base Resin V2 1L (Form 4) - Dark Pink (DP)","public_title":"Dark Pink (DP)","options":["Dark Pink (DP)"],"price":78650,"weight":1500,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":null,"featured_media":{"alt":"Denture Base Resin 1L (Form 4B) Dark Pink","id":37475615670508,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Denture_Base_Resin_1L_Form_4B_Dark_Pink_Product_Picture.webp?v=1783978817"}},"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/Denture_Base_Resin_1L_Form_4B_Light_Pink_Product_Picture.webp?v=1783978817","\/\/www.voxelfactory.com\/cdn\/shop\/files\/Denture_Base_Resin_1L_Form_4B_Product_Picture.webp?v=1783972404","\/\/www.voxelfactory.com\/cdn\/shop\/files\/Denture_Base_Resin_1L_Form_4B_Dark_Pink_Product_Picture.webp?v=1783978817"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Denture_Base_Resin_1L_Form_4B_Light_Pink_Product_Picture.webp?v=1783978817","options":["Color"],"media":[{"alt":"Denture Base Resin 1L (Form 4B) - Light Pink","id":37475615637740,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Denture_Base_Resin_1L_Form_4B_Light_Pink_Product_Picture.webp?v=1783978817"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Denture_Base_Resin_1L_Form_4B_Light_Pink_Product_Picture.webp?v=1783978817","width":1400},{"alt":"Denture Base Resin 1L (Form 4B) - Original Pink","id":37475275669740,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Denture_Base_Resin_1L_Form_4B_Product_Picture.webp?v=1783972404"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Denture_Base_Resin_1L_Form_4B_Product_Picture.webp?v=1783972404","width":1400},{"alt":"Denture Base Resin 1L (Form 4B) Dark Pink","id":37475615670508,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Denture_Base_Resin_1L_Form_4B_Dark_Pink_Product_Picture.webp?v=1783978817"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Denture_Base_Resin_1L_Form_4B_Dark_Pink_Product_Picture.webp?v=1783978817","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003eHigh-impact denture base material for lifelike, long-lasting prosthetics\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eDenture Base Resin V2 is a high-impact, Class II biocompatible material for producing durable, natural-looking dentures that exceed ISO standards. Three semi-translucent pink shades, broad workflow compatibility, and a streamlined post-processing protocol give dental professionals the confidence to guarantee their work for years of patient wear.\u003c\/p\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003ch4\u003eWhy Choose Denture Base v2 Resin\u003c\/h4\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eDenture Base v2 Resin enables dental professionals to 3D print durable, high-impact denture bases with lifelike aesthetics using a streamlined and validated process.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLong-Term Performance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eDeliver dentures with the toughness to stand up to everyday wear and accidental drops -- along with the compatibility to be relined with a range of hard and soft materials and repaired using standard repair methods -- giving dentists and lab technicians the confidence to guarantee their work for years of patient wear.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLifelike, Adaptive Aesthetics\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eProvide natural-looking gingiva in three shades — Original, Light, and Dark Pink — and optimal translucency that blends seamlessly with the patient's tissue.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStreamlined, Validated Process\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eReach the final denture in fewer steps without additional equipment – a 10-minute IPA wash, 20-minute post-cure, and no extra solvents – with the ease of an auto-dispense cartridge and the fully validated Formlabs ecosystem.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOpen, Flexible Workflow\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ePair with Formlabs Premium Teeth Resin and streamline denture assembly using the Denture Base V2 resin as a bonding agent — or stay flexible with full compatibility for milled, carded, or third-party 3D printed teeth and 3rd party bonding materials.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eApplications\u003c\/h4\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eDenture Base v2 Resin is expanding access to durable, lifelike digital dentures with a streamlined, validated, and cost-effective manufacturing solution.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eMaterial Properties\u003c\/h4\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDenture Base Resin V2\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\n\u003cp\u003e\u003cb\u003eFlexural Strength\u003c\/b\u003e\u003cbr\u003e67 MPa\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\n\u003cp\u003e\u003cb\u003eFlexural Modulus\u003c\/b\u003e\u003cbr\u003e2200 MPa\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\n\u003cp\u003e\u003cb\u003eMaximum Stress Intensity Factor\u003c\/b\u003e\u003cbr\u003e2.4 MPa.m1\/2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\n\u003cp\u003e\u003cb\u003eWork of Fracture\u003c\/b\u003e\u003cbr\u003e1000 J\/m2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca class=\"voxel-product-description-link\" rel=\"noopener\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/26011107-TDS-ENUS-0.pdf?v=1783975113\" target=\"_blank\"\u003eDownload Digital Dentures Technical Data Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e* Material properties may vary based on part geometry, print orientation, print settings, and temperature. Data for post-cured samples were measured on Type I tensile bars printed on a Form 4B printer with 100 μm Denture Base Resin V2 settings, washed in a Form Wash for 10 minutes in ≥99% Isopropyl Alcohol, and post-cured at 80°C for 30 minutes in a Form Cure L v1. Testing performed at NAMSA World Headquarters, OH, USA\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003ePost-Processing\u003c\/h4\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWashing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe foundational step in any SLA post-processing workflow is to remove excess resin on the surface of the parts through an alcohol wash. Please refer to the material's manufacturing guide\/IFU for washing instructions.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCuring\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFor biocompatible materials, post-curing is necessary to achieve the safety standards determined by regulatory agencies. Please follow the material’s manufacturing guide\/IFU for proper post-processing.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/2102513-IU-ENUS-0.pdf?v=1783976239\" class=\"voxel-product-description-link\" target=\"_blank\"\u003eInstructions for Use: Denture Base Resin V2\u003c\/a\u003e\u003c\/p\u003e"}
Denture Base Resin V2 1L (Form 4)
$786.50
Summary High-impact denture base material for lifelike, long-lasting prosthetics Denture Base Resin V2 is a high-impact, Class II biocompatible material for producing durable, natural-looking dentures that exceed ISO standards. Three semi-translucent pink shades, broad workflow compatibility, and a streamlined post-processing protocol give den...
{"id":9311733711084,"title":"BioMed Flex 50A Resin 1L (Form 4)","handle":"biomed-flex-50a-resin-1l-form-4","description":"\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003eBioMed Flex 50A Resin is a soft, elastic, and transparent material for biocompatible applications requiring comfort and long-term skin (\u0026gt;30 days) or short-term mucosal membrane contact (\u0026lt;24 hours).\u003c\/p\u003e\n\u003cp\u003eBioMed Flex 50A Resin is manufactured in our FDA-registered, ISO 13485-certified facility.\u003c\/p\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003ch4\u003eWhy Choose BioMed Flex 50A Resin?\u003c\/h4\u003e\n\u003cp\u003e\u003cbr\u003eFuel medical innovation using 3D printing and BioMed Flex 50A Resin, from comfortable, patient-specific medical devices to soft tissue medical models surgeons can reference in the operating room (O.R.)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComfortable\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eProduce mass-personalized, medical-grade parts that are comfortable and feel great.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSoft\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eProduce soft tissue models that feel similar to human tissue and deliver biomechanical behaviors that are ideal for creating full-size hearts, gastrointestinal models, or small complex neurovascular models to bring into the O.R.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTransparent\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eParts produced using this material appear transparent and clear to view how tools or objects flow within parts.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMedical-Grade Material, Biocompatible Parts\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eLeverage a material manufactured within our Quality Management Systems, with strict adherence to ISO 13485. Instill confidence that this material is suitable for biocompatible applications with long-term skin (\u0026gt;30 days), short-term mucosal membrane contact (\u0026lt;24 hours), and USP Class VI certifications.\u003c\/p\u003e","published_at":"2026-07-12T17:17:14-04:00","created_at":"2026-07-12T17:17:13-04:00","vendor":"Formlabs","type":"Résines Formlabs","tags":["Form 4B","Form 4BL"],"price":49999,"price_min":49999,"price_max":49999,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47934029267180,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"FLB-RSN-BFX-50A-0F4","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"BioMed Flex 50A Resin 1L (Form 4)","public_title":null,"options":["Default Title"],"price":49999,"weight":1500,"compare_at_price":null,"inventory_quantity":-2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"811294034967","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/BioMed_Flex_50A_Resin_1L_Form_4_Product_Picture.webp?v=1783890617"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/BioMed_Flex_50A_Resin_1L_Form_4_Product_Picture.webp?v=1783890617","options":["Title"],"media":[{"alt":"BioMed Flex 50A Resin 1L Form 4","id":37471015272684,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/BioMed_Flex_50A_Resin_1L_Form_4_Product_Picture.webp?v=1783890617"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/BioMed_Flex_50A_Resin_1L_Form_4_Product_Picture.webp?v=1783890617","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003eBioMed Flex 50A Resin is a soft, elastic, and transparent material for biocompatible applications requiring comfort and long-term skin (\u0026gt;30 days) or short-term mucosal membrane contact (\u0026lt;24 hours).\u003c\/p\u003e\n\u003cp\u003eBioMed Flex 50A Resin is manufactured in our FDA-registered, ISO 13485-certified facility.\u003c\/p\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003ch4\u003eWhy Choose BioMed Flex 50A Resin?\u003c\/h4\u003e\n\u003cp\u003e\u003cbr\u003eFuel medical innovation using 3D printing and BioMed Flex 50A Resin, from comfortable, patient-specific medical devices to soft tissue medical models surgeons can reference in the operating room (O.R.)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComfortable\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eProduce mass-personalized, medical-grade parts that are comfortable and feel great.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSoft\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eProduce soft tissue models that feel similar to human tissue and deliver biomechanical behaviors that are ideal for creating full-size hearts, gastrointestinal models, or small complex neurovascular models to bring into the O.R.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTransparent\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eParts produced using this material appear transparent and clear to view how tools or objects flow within parts.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMedical-Grade Material, Biocompatible Parts\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eLeverage a material manufactured within our Quality Management Systems, with strict adherence to ISO 13485. Instill confidence that this material is suitable for biocompatible applications with long-term skin (\u0026gt;30 days), short-term mucosal membrane contact (\u0026lt;24 hours), and USP Class VI certifications.\u003c\/p\u003e"}
BioMed Flex 50A Resin 1L (Form 4)
$499.99
Summary BioMed Flex 50A Resin is a soft, elastic, and transparent material for biocompatible applications requiring comfort and long-term skin (>30 days) or short-term mucosal membrane contact (<24 hours). BioMed Flex 50A Resin is manufactured in our FDA-registered, ISO 13485-certified facility. Description Why Choose BioMed Flex 50A Resin...
{"id":9302020882668,"title":"Original PrusaSlicer Mug","handle":"original-prusaslicer-mug","description":"\u003cp\u003eMatte black Original PrusaSlicer Mug, printed with PrusaSlicer keyboard shortcuts that make it easier for you to slice 3D models.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003eEnamel mug with handle\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003eDiameter 8 cm (3,15 inches)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003eHeight 8 cm (3,15 inches)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003eVolume 400 ml (13.5 oz)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003eWeight 158 g\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003eColor: Matte black with glossy text\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003eDo not wash in dishwasher*\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2026-06-29T17:25:53-04:00","created_at":"2026-06-29T17:25:52-04:00","vendor":"Prusa Research","type":"Prusa Research Merch","tags":[],"price":3199,"price_min":3199,"price_max":3199,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47865215451372,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-PSR-MUG-000-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Original PrusaSlicer Mug","public_title":null,"options":["Default Title"],"price":3199,"weight":500,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/Original_PrusaSlicer_Mug_Product_Picture.webp?v=1782768215"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Original_PrusaSlicer_Mug_Product_Picture.webp?v=1782768215","options":["Title"],"media":[{"alt":"Original PrusaSlicer Mug","id":37416258928876,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Original_PrusaSlicer_Mug_Product_Picture.webp?v=1782768215"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Original_PrusaSlicer_Mug_Product_Picture.webp?v=1782768215","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eMatte black Original PrusaSlicer Mug, printed with PrusaSlicer keyboard shortcuts that make it easier for you to slice 3D models.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003eEnamel mug with handle\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003eDiameter 8 cm (3,15 inches)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003eHeight 8 cm (3,15 inches)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003eVolume 400 ml (13.5 oz)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003eWeight 158 g\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003eColor: Matte black with glossy text\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003eDo not wash in dishwasher*\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e"}
Original PrusaSlicer Mug
$31.99
Matte black Original PrusaSlicer Mug, printed with PrusaSlicer keyboard shortcuts that make it easier for you to slice 3D models. Enamel mug with handle Diameter 8 cm (3,15 inches) Height 8 cm (3,15 inches) Volume 400 ml (13.5 oz) Weight 158 g Color: Matte black with glossy text Do not wash in dishwasher*
{"id":9302016655596,"title":"Original Prusa Heatbed Mousepad","handle":"original-prusa-heatbed-mousepad","description":"\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003eIf you miss your 3D printer every time you lose sight of your heatbed, you can now place it right on your workbench and enjoy looking at it every day with the Original Prusa MousePad.\u003c\/p\u003e","published_at":"2026-06-29T17:07:01-04:00","created_at":"2026-06-29T17:07:00-04:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":[],"price":2399,"price_min":2399,"price_max":2399,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47865195921644,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-HBD-MPD-000-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Original Prusa Heatbed Mousepad","public_title":null,"options":["Default Title"],"price":2399,"weight":100,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/Original_Prusa_Heatbed_Mousepad_Product_Picture.webp?v=1782767016","\/\/www.voxelfactory.com\/cdn\/shop\/files\/Original_Prusa_Heatbed_Mousepad_Featured_Product_Picture.webp?v=1782767017"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Original_Prusa_Heatbed_Mousepad_Product_Picture.webp?v=1782767016","options":["Title"],"media":[{"alt":"Original Prusa Heatbed Mousepad","id":37416237039852,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Original_Prusa_Heatbed_Mousepad_Product_Picture.webp?v=1782767016"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Original_Prusa_Heatbed_Mousepad_Product_Picture.webp?v=1782767016","width":1400},{"alt":"Original Prusa Heatbed Mousepad Featured","id":37416237007084,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Original_Prusa_Heatbed_Mousepad_Featured_Product_Picture.webp?v=1782767017"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Original_Prusa_Heatbed_Mousepad_Featured_Product_Picture.webp?v=1782767017","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003eIf you miss your 3D printer every time you lose sight of your heatbed, you can now place it right on your workbench and enjoy looking at it every day with the Original Prusa MousePad.\u003c\/p\u003e"}
Original Prusa Heatbed Mousepad
$23.99
Summary If you miss your 3D printer every time you lose sight of your heatbed, you can now place it right on your workbench and enjoy looking at it every day with the Original Prusa MousePad.
{"id":9301995716844,"title":"Original Prusa MK4\/S Enclosure","handle":"original-prusa-mk4-s-enclosure","description":"\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003eIntroducing Original Prusa Enclosure: Modular box for your 3D printer.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eEnclosures mainly help with stabilizing the inner environment and raising ambient temperatures, which is vital for printing materials such as ASA, PC-CF, PP, and others that have a tendency to warp. Prusa Research also prepared a handful of add-ons that cater to any of your specific needs.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe Original Prusa Enclosure is shipped disassembled as a kit.\u003c\/p\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003ch2\u003eMain Features\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eHigh-quality Components\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe frame along with the top and bottom panels are made from metal, the side panels are made from PETG plastic. The solid robust design allows several enclosures to be stacked on top of each other and secured using screws.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/frame.avif?v=1782764224\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003ePrint Advanced Materials\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe enclosure creates a stable printing environment with increased temperatures, shields the printer from drafts and blasts of cold air and reduces the build-up of dust on moving parts. This is perfect for printing demanding high-temperature materials which are otherwise prone to warping - such as PC CF, Nylon, PP and more.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/advanced-material.avif?v=1782764271\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eSafety Features\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eInstall an optional lock to prevent unauthorized access to your 3D printer - ideal solution for schools, hackerspaces and other public places. An optional filtration system (HEPA filter, 99.9% efficiency) prevents the spread of ultra-fine particles (UFPS).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/Key_Lock_System.avif?v=1782764358\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eUpgradable and Expandable\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe enclosure can be further upgraded and expanded with official add-ons (both paid and free) and it is also ready for your DIY projects. You can design your own brackets, holders and other accessories to tailor the enclosure exactly for your needs. A dedicated section will be available at Printables.com after release.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/mounting_points.avif?v=1782764392\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca class=\"voxel-product-description-link\" href=\"https:\/\/blog.prusa3d.com\/original-prusa-enclosure_67656\/\" rel=\"noopener\" target=\"_blank\"\u003eLearn more in the announcement article\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions with the LCD mounted outside:\u003c\/strong\u003e 530 mm (w) × 545 mm (h) × 715 mm (d)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions with the LCD inside:\u003c\/strong\u003e 530 mm (w) × 545 mm (h) × 640 mm (d) At least 250 mm is required in front of the enclosure for the doors to fully open\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003e\u003cstrong\u003eEnclosure type:\u003c\/strong\u003e Passive, heating provided only by the 3D printer’s heatbed\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003e\u003cstrong\u003eWeight: \u003c\/strong\u003e10,6 kg (23.4 lbs)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003e\u003cstrong\u003eMax stackable units:\u003c\/strong\u003e up to 5 (with more than 3 enclosures, anchoring to a wall is recommended)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003e\u003cstrong\u003eThe basic package contains:\u003c\/strong\u003e All components required to build the enclosure (frame parts, transparent side panels, top and bottom panels, mounting material, printer frame brace), temperature sensor, and documentation. Handles and optional 3D-printed accessories seen in some photos are not included in the package.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/size.avif?v=1782764979\" alt=\"\"\u003e\u003c\/p\u003e","published_at":"2026-06-29T16:09:18-04:00","created_at":"2026-06-29T16:09:17-04:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":["enclosure","FreeShippingExcluded","MK4","MK4S"],"price":55900,"price_min":55900,"price_max":55900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47865081495788,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-MKX-ENC-000-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Original Prusa MK4\/S Enclosure","public_title":null,"options":["Default Title"],"price":55900,"weight":10600,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/Original_Prusa_MK4_S_Enclosure_Product_Picture.webp?v=1782763311","\/\/www.voxelfactory.com\/cdn\/shop\/files\/Original_Prusa_MK4_S_Enclosure_Side_View_Product_Picture.webp?v=1782827629"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Original_Prusa_MK4_S_Enclosure_Product_Picture.webp?v=1782763311","options":["Title"],"media":[{"alt":"Original Prusa MK4\/S Enclosure","id":37416093188332,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Original_Prusa_MK4_S_Enclosure_Product_Picture.webp?v=1782763311"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Original_Prusa_MK4_S_Enclosure_Product_Picture.webp?v=1782763311","width":1400},{"alt":"Original Prusa MK4\/S Enclosure Side View","id":37418081943788,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Original_Prusa_MK4_S_Enclosure_Side_View_Product_Picture.webp?v=1782827629"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Original_Prusa_MK4_S_Enclosure_Side_View_Product_Picture.webp?v=1782827629","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003eIntroducing Original Prusa Enclosure: Modular box for your 3D printer.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eEnclosures mainly help with stabilizing the inner environment and raising ambient temperatures, which is vital for printing materials such as ASA, PC-CF, PP, and others that have a tendency to warp. Prusa Research also prepared a handful of add-ons that cater to any of your specific needs.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe Original Prusa Enclosure is shipped disassembled as a kit.\u003c\/p\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003ch2\u003eMain Features\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eHigh-quality Components\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe frame along with the top and bottom panels are made from metal, the side panels are made from PETG plastic. The solid robust design allows several enclosures to be stacked on top of each other and secured using screws.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/frame.avif?v=1782764224\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003ePrint Advanced Materials\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe enclosure creates a stable printing environment with increased temperatures, shields the printer from drafts and blasts of cold air and reduces the build-up of dust on moving parts. This is perfect for printing demanding high-temperature materials which are otherwise prone to warping - such as PC CF, Nylon, PP and more.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/advanced-material.avif?v=1782764271\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eSafety Features\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eInstall an optional lock to prevent unauthorized access to your 3D printer - ideal solution for schools, hackerspaces and other public places. An optional filtration system (HEPA filter, 99.9% efficiency) prevents the spread of ultra-fine particles (UFPS).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/Key_Lock_System.avif?v=1782764358\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eUpgradable and Expandable\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe enclosure can be further upgraded and expanded with official add-ons (both paid and free) and it is also ready for your DIY projects. You can design your own brackets, holders and other accessories to tailor the enclosure exactly for your needs. A dedicated section will be available at Printables.com after release.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/mounting_points.avif?v=1782764392\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca class=\"voxel-product-description-link\" href=\"https:\/\/blog.prusa3d.com\/original-prusa-enclosure_67656\/\" rel=\"noopener\" target=\"_blank\"\u003eLearn more in the announcement article\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions with the LCD mounted outside:\u003c\/strong\u003e 530 mm (w) × 545 mm (h) × 715 mm (d)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions with the LCD inside:\u003c\/strong\u003e 530 mm (w) × 545 mm (h) × 640 mm (d) At least 250 mm is required in front of the enclosure for the doors to fully open\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003e\u003cstrong\u003eEnclosure type:\u003c\/strong\u003e Passive, heating provided only by the 3D printer’s heatbed\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003e\u003cstrong\u003eWeight: \u003c\/strong\u003e10,6 kg (23.4 lbs)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003e\u003cstrong\u003eMax stackable units:\u003c\/strong\u003e up to 5 (with more than 3 enclosures, anchoring to a wall is recommended)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003e\u003cstrong\u003eThe basic package contains:\u003c\/strong\u003e All components required to build the enclosure (frame parts, transparent side panels, top and bottom panels, mounting material, printer frame brace), temperature sensor, and documentation. Handles and optional 3D-printed accessories seen in some photos are not included in the package.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/size.avif?v=1782764979\" alt=\"\"\u003e\u003c\/p\u003e"}
Original Prusa MK4/S Enclosure
$559.00
Summary Introducing Original Prusa Enclosure: Modular box for your 3D printer. Enclosures mainly help with stabilizing the inner environment and raising ambient temperatures, which is vital for printing materials such as ASA, PC-CF, PP, and others that have a tendency to warp. Prusa Research also prepared a handful of add-ons that cater to any...
![PA Nylon Powder-coated Print Sheet [CORE One L]](http://www.voxelfactory.com/cdn/shop/files/Prusa_CORE_One_L_PA_Nylon_Powder_Coated_Print_Sheet_Product_Picture_300x@2x.webp?v=1782761671)
![PA Nylon Powder-coated Print Sheet [CORE One L]](http://www.voxelfactory.com/cdn/shop/files/Prusa_CORE_One_L_PA_Nylon_Powder_Coated_Print_Sheet_Product_Picture_200x@2x.webp?v=1782761671)
{"id":9301988081900,"title":"PA Nylon Powder-coated Print Sheet [CORE One L]","handle":"pa-nylon-powder-coated-print-sheet-core-one-l","description":"\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003eThe heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThis print sheet is specially designed to print polyamide-based filaments, especially the Prusament PA11 Carbon Fiber Black. The PA11-type materials have generally a lower adhesion on textured or satin print sheets. This sheet has a special surface finish that increases the adhesion and is perfect for Prusament PA11. You can learn more about the Double-sided Powder-coated PA Nylon Spring Steel Sheet in Prusa's \u003ca rel=\"noopener\" href=\"https:\/\/help.prusa3d.com\/article\/special-pa-nylon-steel-sheet_341570\" class=\"voxel-product-description-link\" target=\"_blank\"\u003eknowledge base\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT!\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe surface of this sheet should be cleaned only with pure water. Using common agents such as IPA or Acetone will lead to a quick deterioration of the surface. Using a glue stick is no longer required and recommended. To clean grease-coated areas, use clean water with a drop of dishwashing detergent.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eConsumable parts, such as PEI sheets (smooth, textured, nylon, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAs a result of the temperatures to which the plate is exposed during printing, its surface gradually becomes glossier or may develop smaller, duller areas. This visual change does not adversely affect the printing properties and is not considered a reason for a warranty claim.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eNote that with the Original Prusa XL, the PA Nylon sheet wear is especially noticeable at the Z probing points, where the nozzle leaves visible marks on the surface. This does not affect the surface adhesion and overall printability. You can examine the marks in Prusa's knowledgebase article.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eA new batch of the PA Nylon sheet will be released during July \/ August 2024. The new version will get a slightly rougher surface texture. This change will not affect the print sheet's functional properties. You can examine the changes in Prusa's knowledge base article as well.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/old_vs_new_texture_sheet_I.avif?v=1782762438\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eOld texture (left) vs new texture (right)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/mirror_effect_III.avif?v=1782762480\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eGlossier surface after print removal\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/mirror_effect_VI.avif?v=1782762507\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eVisible marks at Z probing points\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eATTRIBUTES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd rowspan=\"3\" class=\"voxel-product-description-table-element\"\u003ePros\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eGreat for polyamide-based materials\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eNo need for a glue stick\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eCan be cleaned just with water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd rowspan=\"2\" class=\"voxel-product-description-table-element\"\u003eCons\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSuitable only for polyamide-based materials and PETG. Other materials tend to detach mid-print\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eCan be damaged with IPA and acetone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","published_at":"2026-06-29T15:48:51-04:00","created_at":"2026-06-29T15:35:20-04:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":["CORE One L","prusa"],"price":19499,"price_min":19499,"price_max":19499,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47865010258156,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-COL-NYL-BST-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"PA Nylon Powder-coated Print Sheet [CORE One L]","public_title":null,"options":["Default Title"],"price":19499,"weight":450,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_CORE_One_L_PA_Nylon_Powder_Coated_Print_Sheet_Product_Picture.webp?v=1782761671"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_CORE_One_L_PA_Nylon_Powder_Coated_Print_Sheet_Product_Picture.webp?v=1782761671","options":["Title"],"media":[{"alt":null,"id":37416065630444,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_CORE_One_L_PA_Nylon_Powder_Coated_Print_Sheet_Product_Picture.webp?v=1782761671"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_CORE_One_L_PA_Nylon_Powder_Coated_Print_Sheet_Product_Picture.webp?v=1782761671","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003eThe heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThis print sheet is specially designed to print polyamide-based filaments, especially the Prusament PA11 Carbon Fiber Black. The PA11-type materials have generally a lower adhesion on textured or satin print sheets. This sheet has a special surface finish that increases the adhesion and is perfect for Prusament PA11. You can learn more about the Double-sided Powder-coated PA Nylon Spring Steel Sheet in Prusa's \u003ca rel=\"noopener\" href=\"https:\/\/help.prusa3d.com\/article\/special-pa-nylon-steel-sheet_341570\" class=\"voxel-product-description-link\" target=\"_blank\"\u003eknowledge base\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT!\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe surface of this sheet should be cleaned only with pure water. Using common agents such as IPA or Acetone will lead to a quick deterioration of the surface. Using a glue stick is no longer required and recommended. To clean grease-coated areas, use clean water with a drop of dishwashing detergent.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eConsumable parts, such as PEI sheets (smooth, textured, nylon, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAs a result of the temperatures to which the plate is exposed during printing, its surface gradually becomes glossier or may develop smaller, duller areas. This visual change does not adversely affect the printing properties and is not considered a reason for a warranty claim.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eNote that with the Original Prusa XL, the PA Nylon sheet wear is especially noticeable at the Z probing points, where the nozzle leaves visible marks on the surface. This does not affect the surface adhesion and overall printability. You can examine the marks in Prusa's knowledgebase article.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eA new batch of the PA Nylon sheet will be released during July \/ August 2024. The new version will get a slightly rougher surface texture. This change will not affect the print sheet's functional properties. You can examine the changes in Prusa's knowledge base article as well.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/old_vs_new_texture_sheet_I.avif?v=1782762438\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eOld texture (left) vs new texture (right)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/mirror_effect_III.avif?v=1782762480\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eGlossier surface after print removal\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/mirror_effect_VI.avif?v=1782762507\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eVisible marks at Z probing points\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eATTRIBUTES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd rowspan=\"3\" class=\"voxel-product-description-table-element\"\u003ePros\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eGreat for polyamide-based materials\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eNo need for a glue stick\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eCan be cleaned just with water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd rowspan=\"2\" class=\"voxel-product-description-table-element\"\u003eCons\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSuitable only for polyamide-based materials and PETG. Other materials tend to detach mid-print\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eCan be damaged with IPA and acetone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e"}
![PA Nylon Powder-coated Print Sheet [CORE One L]](http://www.voxelfactory.com/cdn/shop/files/Prusa_CORE_One_L_PA_Nylon_Powder_Coated_Print_Sheet_Product_Picture_1024x.webp?v=1782761671)
PA Nylon Powder-coated Print Sheet [CORE One L]
$194.99
Summary The heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets. This print sheet is specially designed to print polyamide-based filaments, especially the Prusament PA11 Carbon Fiber Black. The PA11-type materials have generally a lower adhesion on textured or satin print she...
![Smooth PEI Print Sheet [CORE One L]](http://www.voxelfactory.com/cdn/shop/files/Prusa_CORE_One_L_Smooth_PEI_Print_Sheet_Product_Picture_300x@2x.webp?v=1782760576)
![Smooth PEI Print Sheet [CORE One L]](http://www.voxelfactory.com/cdn/shop/files/Prusa_CORE_One_L_Smooth_PEI_Print_Sheet_Product_Picture_200x@2x.webp?v=1782760576)
{"id":9301985788140,"title":"Smooth PEI Print Sheet [CORE One L]","handle":"smooth-pei-print-sheet-core-one-l","description":"\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003eDouble-sided Smooth PEI spring steel sheet for Prusa CORE One L\u003c\/p\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eYou can leave small marks on the print surface with your nozzle or tools, they will typically be shinier than the rest. It does not affect functionality or adhesion. However, if you want to have the same surface look on the whole printbed you can resurface it. The easiest way is to take the hard side of a dry kitchen sponge and wipe the affected area with a circular motion gently a few times.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFind more details about the spring steel sheets in Prusa's \u003ca class=\"voxel-product-description-link\" href=\"https:\/\/help.prusa3d.com\/article\/steel-sheet-profiles_1955\" target=\"_blank\" rel=\"noopener\"\u003eknowledge base\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eConsumable parts, such as PEI sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTiny dots may appear on the PEI-Ultem steel sheet surface. These can slightly affect the finished print bottom surface. However, they do not impact the printing process, reliability in any way. Prusa do not consider these dots a reason for a warranty claim.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eATTRIBUTES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd rowspan=\"4\" class=\"voxel-product-description-table-element\"\u003ePros\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePerfect for PLA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eGreat adhesion with almost all materials\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSmooth bottom of prints\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eTiny details will stick great\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd rowspan=\"2\" class=\"voxel-product-description-table-element\"\u003eCons\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eDo not clean with IPA before PETG — Release agent might be necessary\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eYou must apply glue stick when printing Flex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","published_at":"2026-06-29T15:25:03-04:00","created_at":"2026-06-29T15:25:02-04:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":["CORE One L","prusa"],"price":10499,"price_min":10499,"price_max":10499,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47865003770092,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-COL-SMT-PEI-BST","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Smooth PEI Print Sheet [CORE One L]","public_title":null,"options":["Default Title"],"price":10499,"weight":450,"compare_at_price":null,"inventory_quantity":-1,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_CORE_One_L_Smooth_PEI_Print_Sheet_Product_Picture.webp?v=1782760576"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_CORE_One_L_Smooth_PEI_Print_Sheet_Product_Picture.webp?v=1782760576","options":["Title"],"media":[{"alt":null,"id":37416042430700,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_CORE_One_L_Smooth_PEI_Print_Sheet_Product_Picture.webp?v=1782760576"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_CORE_One_L_Smooth_PEI_Print_Sheet_Product_Picture.webp?v=1782760576","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003eDouble-sided Smooth PEI spring steel sheet for Prusa CORE One L\u003c\/p\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eYou can leave small marks on the print surface with your nozzle or tools, they will typically be shinier than the rest. It does not affect functionality or adhesion. However, if you want to have the same surface look on the whole printbed you can resurface it. The easiest way is to take the hard side of a dry kitchen sponge and wipe the affected area with a circular motion gently a few times.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFind more details about the spring steel sheets in Prusa's \u003ca class=\"voxel-product-description-link\" href=\"https:\/\/help.prusa3d.com\/article\/steel-sheet-profiles_1955\" target=\"_blank\" rel=\"noopener\"\u003eknowledge base\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eConsumable parts, such as PEI sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTiny dots may appear on the PEI-Ultem steel sheet surface. These can slightly affect the finished print bottom surface. However, they do not impact the printing process, reliability in any way. Prusa do not consider these dots a reason for a warranty claim.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eATTRIBUTES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd rowspan=\"4\" class=\"voxel-product-description-table-element\"\u003ePros\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePerfect for PLA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eGreat adhesion with almost all materials\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSmooth bottom of prints\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eTiny details will stick great\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd rowspan=\"2\" class=\"voxel-product-description-table-element\"\u003eCons\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eDo not clean with IPA before PETG — Release agent might be necessary\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eYou must apply glue stick when printing Flex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e"}
![Smooth PEI Print Sheet [CORE One L]](http://www.voxelfactory.com/cdn/shop/files/Prusa_CORE_One_L_Smooth_PEI_Print_Sheet_Product_Picture_1024x.webp?v=1782760576)
Smooth PEI Print Sheet [CORE One L]
$104.99
Summary Double-sided Smooth PEI spring steel sheet for Prusa CORE One L Description You can leave small marks on the print surface with your nozzle or tools, they will typically be shinier than the rest. It does not affect functionality or adhesion. However, if you want to have the same surface look on the whole printbed you can resurface it. Th...
{"id":9301978513644,"title":"Textured Powder-coated Print Sheet [CORE One L]","handle":"textured-powder-coated-print-sheet-core-one-l","description":"\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eDouble-sided textured PEI powder-coated spring steel sheet for Prusa CORE One L.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003ePowder coating directly on metal makes it very hard to damage this build plate. If a heated nozzle crashed into it, the metal can dissipate the heat. Powder coating also gives the surface a distinct textured look that will be visible on your prints. The textured surface hides most of the mechanical damage caused by tools. Only the top of the small bumps can be scratched, which will not imprint on the bottom of the model. This surface is used on our print farm, look at the printed parts you have on your printer for reference.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFind more details about the spring steel sheets in Prusa's \u003ca rel=\"noopener\" href=\"https:\/\/help.prusa3d.com\/article\/steel-sheet-profiles_1955\" class=\"voxel-product-description-link\" target=\"_blank\"\u003eknowledge base\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWARNING\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eNever clean the Textured PEI Powder-coated spring steel sheet with acetone! Doing so will create microfractures in the PEI texture, which will make the surface deteriorate over time. Learn more about printing on the Textured PEI Powder coated steel sheet on Prusa's \u003ca rel=\"noopener\" href=\"https:\/\/blog.prusa3d.com\/how-to-print-on-a-powder-coated-sheet_30178\/\" class=\"voxel-product-description-link\" target=\"_blank\"\u003eBlog\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eConsumable parts, such as PEI sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eATTRIBUTES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd rowspan=\"6\" class=\"voxel-product-description-table-element\"\u003ePros\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eScratchproof, hard to damage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eTransfers texture to prints\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eMore forgiving Live Adjust Z setting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eNo need for glue stick for PETG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePrints automatically detach after sheet cools down\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eFirst layer can be more squished compared to smooth sheets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd rowspan=\"3\" class=\"voxel-product-description-table-element\"\u003eCons\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePLA prints with a small contact area may need a brim\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePLA prints with a huge footprint may warp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eNever clean with acetone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","published_at":"2026-06-29T14:46:02-04:00","created_at":"2026-06-29T14:46:01-04:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":["CORE One L","prusa"],"price":9099,"price_min":9099,"price_max":9099,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47864879546604,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-COL-TXT-BST-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Textured Powder-coated Print Sheet [CORE One L]","public_title":null,"options":["Default Title"],"price":9099,"weight":450,"compare_at_price":null,"inventory_quantity":-1,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_CORE_One_L_Textured_Powder_coated_Print_Sheet_Product_Picture.webp?v=1782758373"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_CORE_One_L_Textured_Powder_coated_Print_Sheet_Product_Picture.webp?v=1782758373","options":["Title"],"media":[{"alt":"Prusa CORE One L Textured Powder coated Print Sheet","id":37415998652652,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_CORE_One_L_Textured_Powder_coated_Print_Sheet_Product_Picture.webp?v=1782758373"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_CORE_One_L_Textured_Powder_coated_Print_Sheet_Product_Picture.webp?v=1782758373","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eDouble-sided textured PEI powder-coated spring steel sheet for Prusa CORE One L.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003ePowder coating directly on metal makes it very hard to damage this build plate. If a heated nozzle crashed into it, the metal can dissipate the heat. Powder coating also gives the surface a distinct textured look that will be visible on your prints. The textured surface hides most of the mechanical damage caused by tools. Only the top of the small bumps can be scratched, which will not imprint on the bottom of the model. This surface is used on our print farm, look at the printed parts you have on your printer for reference.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFind more details about the spring steel sheets in Prusa's \u003ca rel=\"noopener\" href=\"https:\/\/help.prusa3d.com\/article\/steel-sheet-profiles_1955\" class=\"voxel-product-description-link\" target=\"_blank\"\u003eknowledge base\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWARNING\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eNever clean the Textured PEI Powder-coated spring steel sheet with acetone! Doing so will create microfractures in the PEI texture, which will make the surface deteriorate over time. Learn more about printing on the Textured PEI Powder coated steel sheet on Prusa's \u003ca rel=\"noopener\" href=\"https:\/\/blog.prusa3d.com\/how-to-print-on-a-powder-coated-sheet_30178\/\" class=\"voxel-product-description-link\" target=\"_blank\"\u003eBlog\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eConsumable parts, such as PEI sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eATTRIBUTES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd rowspan=\"6\" class=\"voxel-product-description-table-element\"\u003ePros\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eScratchproof, hard to damage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eTransfers texture to prints\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eMore forgiving Live Adjust Z setting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eNo need for glue stick for PETG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePrints automatically detach after sheet cools down\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eFirst layer can be more squished compared to smooth sheets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd rowspan=\"3\" class=\"voxel-product-description-table-element\"\u003eCons\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePLA prints with a small contact area may need a brim\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePLA prints with a huge footprint may warp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eNever clean with acetone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e"}
Textured Powder-coated Print Sheet [CORE One L]
$90.99
Summary Double-sided textured PEI powder-coated spring steel sheet for Prusa CORE One L. Description Powder coating directly on metal makes it very hard to damage this build plate. If a heated nozzle crashed into it, the metal can dissipate the heat. Powder coating also gives the surface a distinct textured look that will be visible on your prin...
{"id":9301945942252,"title":"Satin Powder-coated Print Sheet [CORE One L]","handle":"prusa-core-one-l-satin-powder-coated-print-sheet","description":"\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003eDouble-sided satin powder-coated spring steel sheet for Prusa CORE One L\u003c\/p\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eIn terms of printing properties, the Satin sheet sits between the smooth and textured variants. Its powder-coated surface with lightly textured matte finish offers an optimal level of adhesion, especially when printing PLA and PETG materials. It is fully compatible with a wide range of common and less-common filaments, such as ABS, ASA, FlexFill 98A, Polycarbonate and more. A vast majority of materials can be printed without a separation layer (e.g. glue).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ePolycarbonate - prints better on satin (compared to smooth and textured sheets) - when printing with PC often, glue stick layer is recommended to prevent possible damage to the sheet.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFind more details about the spring steel sheets in Prusa's \u003ca href=\"https:\/\/help.prusa3d.com\/article\/steel-sheet-profiles_1955\" rel=\"noopener\" class=\"voxel-product-description-link\" target=\"_blank\"\u003eknowledge base\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWARNING\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eNever clean the Satin powder-coated spring steel sheet with acetone! Doing so will create microfractures in the texture, which will make the surface deteriorate over time. Learn more about printing on the Satin powder-coated steel sheet in Prusa's \u003ca href=\"https:\/\/help.prusa3d.com\/article\/flexible-steel-sheets-guidepost_2195\" rel=\"noopener\" class=\"voxel-product-description-link\" target=\"_blank\"\u003eknowledge base\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eConsumable parts, such as PEI sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eATTRIBUTES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\" rowspan=\"5\"\u003ePros\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSuitable for both PLA and PETG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eLightly textured surface finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eNo need for glue stick for PETG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eWide range of supported filaments, including advanced materials, for instance PC Blend\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eEasy maintenance and good adhesion qualities\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\" rowspan=\"3\"\u003eCons\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eAcetone causes the surface to quickly deteriorate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePrints from ASA, PC Blend require a brim \/ skirt \/ shield around the print\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eDO NOT use sharp metal objects (e.g. a spatula) to remove the print!\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","published_at":"2026-06-29T13:30:45-04:00","created_at":"2026-06-29T13:30:43-04:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":["CORE One L"],"price":9899,"price_min":9899,"price_max":9899,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47864772624620,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-COL-STN-BST-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Satin Powder-coated Print Sheet [CORE One L]","public_title":null,"options":["Default Title"],"price":9899,"weight":450,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_CORE_One_L_Satin_Powder_coated_Print_Sheet_Product_Picture.webp?v=1782752912"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_CORE_One_L_Satin_Powder_coated_Print_Sheet_Product_Picture.webp?v=1782752912","options":["Title"],"media":[{"alt":"Prusa CORE One L Satin Powder coated Print Sheet","id":37415860863212,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_CORE_One_L_Satin_Powder_coated_Print_Sheet_Product_Picture.webp?v=1782752912"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_CORE_One_L_Satin_Powder_coated_Print_Sheet_Product_Picture.webp?v=1782752912","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003eDouble-sided satin powder-coated spring steel sheet for Prusa CORE One L\u003c\/p\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eIn terms of printing properties, the Satin sheet sits between the smooth and textured variants. Its powder-coated surface with lightly textured matte finish offers an optimal level of adhesion, especially when printing PLA and PETG materials. It is fully compatible with a wide range of common and less-common filaments, such as ABS, ASA, FlexFill 98A, Polycarbonate and more. A vast majority of materials can be printed without a separation layer (e.g. glue).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ePolycarbonate - prints better on satin (compared to smooth and textured sheets) - when printing with PC often, glue stick layer is recommended to prevent possible damage to the sheet.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFind more details about the spring steel sheets in Prusa's \u003ca href=\"https:\/\/help.prusa3d.com\/article\/steel-sheet-profiles_1955\" rel=\"noopener\" class=\"voxel-product-description-link\" target=\"_blank\"\u003eknowledge base\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWARNING\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eNever clean the Satin powder-coated spring steel sheet with acetone! Doing so will create microfractures in the texture, which will make the surface deteriorate over time. Learn more about printing on the Satin powder-coated steel sheet in Prusa's \u003ca href=\"https:\/\/help.prusa3d.com\/article\/flexible-steel-sheets-guidepost_2195\" rel=\"noopener\" class=\"voxel-product-description-link\" target=\"_blank\"\u003eknowledge base\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eConsumable parts, such as PEI sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eATTRIBUTES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\" rowspan=\"5\"\u003ePros\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSuitable for both PLA and PETG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eLightly textured surface finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eNo need for glue stick for PETG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eWide range of supported filaments, including advanced materials, for instance PC Blend\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eEasy maintenance and good adhesion qualities\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\" rowspan=\"3\"\u003eCons\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eAcetone causes the surface to quickly deteriorate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePrints from ASA, PC Blend require a brim \/ skirt \/ shield around the print\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eDO NOT use sharp metal objects (e.g. a spatula) to remove the print!\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e"}
Satin Powder-coated Print Sheet [CORE One L]
$98.99
Summary Double-sided satin powder-coated spring steel sheet for Prusa CORE One L Description In terms of printing properties, the Satin sheet sits between the smooth and textured variants. Its powder-coated surface with lightly textured matte finish offers an optimal level of adhesion, especially when printing PLA and PETG materials. It is fully...
{"id":9301879619820,"title":"Prusament ASA 1.75mm 800g (NFC)","handle":"prusament-asa-1-75mm-800g-nfc","description":"\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003ePrusament is a premium-grade material made by the same people who build the printers. Every spool is manufactured in-house with consistent color and high diameter precision. You can verify it yourself, down to the last meter.\u003c\/p\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003ch2\u003eWhy To Choose Prusament\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGuaranteed Color Consistency\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eEvery Prusament color is formulated and locked to a documented spectroscopic recipe. Prusa test every batch against the standard before it ships. The result: if you run out mid-project and order a second spool, the colors will match perfectly.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrecise Manufacturing \u0026amp; Strict Quality Control\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTheir diameter tolerance is the maximum limit, not an average: when they say the diameter tolerance is ±0.04 mm, the real numbers are much lower. Prusa continuously measure and record diameter and ovality across the full length of every spool and publish the actual data.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh Quality You Can Check Yourself\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eEvery Prusament spool comes with the actual measured data from manufacturing: diameter readings along the entire length, weight, and ovality. Prusa is the only filament manufacturer in the world that does this.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerfect Winding On Every Spool\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eTheir PLA filament is wound under controlled tension on precision machines. Every spool goes through a final inspection before shipping. The result is a spool that feeds smoothly from start to finish. Also, it looks great every time.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eExcellent for outdoor use\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eASA's one of the main advantages is excellent UV resistance. This, in combination with good high-temperature resistance, makes it perfectly suitable for making outdoor parts with a long lifespan. Here's a great example: Czech company Anitra System uses Prusament ASA for making GPS loggers attached to migratory birds, where long lifespan and high resistance are necessary.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/4b2d083a-f452-4b48-a851-86a51be7fcf2.avif?v=1782740947\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003ePerfectly smooth finish made with acetone vapors\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eASA is soluble in acetone. When exposed to acetone vapors, the model's surface melts and forms a glossy finish, hiding print layers and imperfections. The result resembles an injection-molded part. You can learn more about chemical smoothing in Prusa's \u003ca href=\"https:\/\/blog.prusa3d.com\/improve-your-3d-prints-with-chemical-smoothing_36268\/\" target=\"_blank\" rel=\"noopener\"\u003eblog article\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/ac37dd88-ff99-4672-8d85-19dac7209815.avif?v=1782741004\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eFine details without stringing\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eUnlike other technical materials, ASA offers little to no stringing. This makes it suitable for printing tiny, detailed parts, such as tabletop figures and similar models.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/d8ebb7b2-e09c-4026-8357-d70530825ffa.avif?v=1782741040\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eBasic Attributes\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\" rowspan=\"6\"\u003ePros\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eGreat for outside use – UV stable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eGood high-temperature resistance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eDetailed prints without a stringing effect\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eCan be smoothed with acetone vapors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eCan be easily sanded \/ post-processed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eGood mechanical resistance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\" rowspan=\"4\"\u003eCons\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eLarge models tend to warp. We recommend printing in an enclosure or printing large components with a less warping material, such as PETG.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eProduces a slight odor of burned plastic during printing (less than ABS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eContains styrene (potentially harmful fumes). We recommend printing in a well-ventilated area or using an enclosure with active filtration.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSlightly hygroscopic (absorbs moisture)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003cthead class=\"voxel-product-description-table-head\"\u003e\n\u003ctr\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003eParameter\u003c\/th\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eNozzle Temperature\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e260 ±5 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eHeatbed Temperature\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e110 ±5 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eRecommended Steel Sheet\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSatin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eRecommended Nozzle\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e0.4 mm brass nozzle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSupported Prusa Print Profiles\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eAll Prusa FDM 3D printers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eFilament Diameter\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eFilament Diameter Tolerance\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e±0.04 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","published_at":"2026-06-29T10:18:54-04:00","created_at":"2026-06-29T09:43:36-04:00","vendor":"Prusa Research","type":"Prusa Research Filament","tags":["asa"],"price":4199,"price_min":4199,"price_max":4199,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47842363146476,"title":"Jet Black","option1":"Jet Black","option2":null,"option3":null,"sku":"PRU-PMT-ASA-JBK-1KG","requires_shipping":true,"taxable":true,"featured_image":{"id":46702215168236,"product_id":9301879619820,"position":1,"created_at":"2026-06-29T10:18:12-04:00","updated_at":"2026-06-29T10:18:14-04:00","alt":null,"width":1400,"height":1050,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusament_ASA_1_75mm_800g_NFC_Jet_Black_Product_Picture.webp?v=1782742694","variant_ids":[47842363146476]},"available":false,"name":"Prusament ASA 1.75mm 800g (NFC) - Jet Black","public_title":"Jet Black","options":["Jet Black"],"price":4199,"weight":1100,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"featured_media":{"alt":null,"id":37414886768876,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusament_ASA_1_75mm_800g_NFC_Jet_Black_Product_Picture.webp?v=1782742694"}},"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":47842363179244,"title":"Signal White","option1":"Signal White","option2":null,"option3":null,"sku":"PRU-PMT-ASA-SWT-1KG","requires_shipping":true,"taxable":true,"featured_image":{"id":46702215528684,"product_id":9301879619820,"position":2,"created_at":"2026-06-29T10:18:21-04:00","updated_at":"2026-06-29T10:18:22-04:00","alt":null,"width":1400,"height":1050,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusament_ASA_1_75mm_800g_NFC_Signal_White_Product_Picture.webp?v=1782742702","variant_ids":[47842363179244]},"available":false,"name":"Prusament ASA 1.75mm 800g (NFC) - Signal White","public_title":"Signal White","options":["Signal White"],"price":4199,"weight":1100,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"featured_media":{"alt":null,"id":37414887162092,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusament_ASA_1_75mm_800g_NFC_Signal_White_Product_Picture.webp?v=1782742702"}},"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":47842363212012,"title":"Prusa Orange","option1":"Prusa Orange","option2":null,"option3":null,"sku":"PRU-PMT-ASA-POR-1KG","requires_shipping":true,"taxable":true,"featured_image":{"id":46702215659756,"product_id":9301879619820,"position":3,"created_at":"2026-06-29T10:18:29-04:00","updated_at":"2026-06-29T10:18:30-04:00","alt":null,"width":1400,"height":1050,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusament_ASA_1_75mm_800g_NFC_Prusa_Orange_Product_Picture.webp?v=1782742710","variant_ids":[47842363212012]},"available":false,"name":"Prusament ASA 1.75mm 800g (NFC) - Prusa Orange","public_title":"Prusa Orange","options":["Prusa Orange"],"price":4199,"weight":1100,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"featured_media":{"alt":null,"id":37414887293164,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusament_ASA_1_75mm_800g_NFC_Prusa_Orange_Product_Picture.webp?v=1782742710"}},"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusament_ASA_1_75mm_800g_NFC_Jet_Black_Product_Picture.webp?v=1782742694","\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusament_ASA_1_75mm_800g_NFC_Signal_White_Product_Picture.webp?v=1782742702","\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusament_ASA_1_75mm_800g_NFC_Prusa_Orange_Product_Picture.webp?v=1782742710"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusament_ASA_1_75mm_800g_NFC_Jet_Black_Product_Picture.webp?v=1782742694","options":["Color"],"media":[{"alt":null,"id":37414886768876,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusament_ASA_1_75mm_800g_NFC_Jet_Black_Product_Picture.webp?v=1782742694"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusament_ASA_1_75mm_800g_NFC_Jet_Black_Product_Picture.webp?v=1782742694","width":1400},{"alt":null,"id":37414887162092,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusament_ASA_1_75mm_800g_NFC_Signal_White_Product_Picture.webp?v=1782742702"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusament_ASA_1_75mm_800g_NFC_Signal_White_Product_Picture.webp?v=1782742702","width":1400},{"alt":null,"id":37414887293164,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusament_ASA_1_75mm_800g_NFC_Prusa_Orange_Product_Picture.webp?v=1782742710"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusament_ASA_1_75mm_800g_NFC_Prusa_Orange_Product_Picture.webp?v=1782742710","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003ePrusament is a premium-grade material made by the same people who build the printers. Every spool is manufactured in-house with consistent color and high diameter precision. You can verify it yourself, down to the last meter.\u003c\/p\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003ch2\u003eWhy To Choose Prusament\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGuaranteed Color Consistency\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eEvery Prusament color is formulated and locked to a documented spectroscopic recipe. Prusa test every batch against the standard before it ships. The result: if you run out mid-project and order a second spool, the colors will match perfectly.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrecise Manufacturing \u0026amp; Strict Quality Control\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTheir diameter tolerance is the maximum limit, not an average: when they say the diameter tolerance is ±0.04 mm, the real numbers are much lower. Prusa continuously measure and record diameter and ovality across the full length of every spool and publish the actual data.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh Quality You Can Check Yourself\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eEvery Prusament spool comes with the actual measured data from manufacturing: diameter readings along the entire length, weight, and ovality. Prusa is the only filament manufacturer in the world that does this.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerfect Winding On Every Spool\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eTheir PLA filament is wound under controlled tension on precision machines. Every spool goes through a final inspection before shipping. The result is a spool that feeds smoothly from start to finish. Also, it looks great every time.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eExcellent for outdoor use\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eASA's one of the main advantages is excellent UV resistance. This, in combination with good high-temperature resistance, makes it perfectly suitable for making outdoor parts with a long lifespan. Here's a great example: Czech company Anitra System uses Prusament ASA for making GPS loggers attached to migratory birds, where long lifespan and high resistance are necessary.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/4b2d083a-f452-4b48-a851-86a51be7fcf2.avif?v=1782740947\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003ePerfectly smooth finish made with acetone vapors\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eASA is soluble in acetone. When exposed to acetone vapors, the model's surface melts and forms a glossy finish, hiding print layers and imperfections. The result resembles an injection-molded part. You can learn more about chemical smoothing in Prusa's \u003ca href=\"https:\/\/blog.prusa3d.com\/improve-your-3d-prints-with-chemical-smoothing_36268\/\" target=\"_blank\" rel=\"noopener\"\u003eblog article\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/ac37dd88-ff99-4672-8d85-19dac7209815.avif?v=1782741004\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eFine details without stringing\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eUnlike other technical materials, ASA offers little to no stringing. This makes it suitable for printing tiny, detailed parts, such as tabletop figures and similar models.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/d8ebb7b2-e09c-4026-8357-d70530825ffa.avif?v=1782741040\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eBasic Attributes\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\" rowspan=\"6\"\u003ePros\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eGreat for outside use – UV stable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eGood high-temperature resistance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eDetailed prints without a stringing effect\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eCan be smoothed with acetone vapors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eCan be easily sanded \/ post-processed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eGood mechanical resistance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\" rowspan=\"4\"\u003eCons\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eLarge models tend to warp. We recommend printing in an enclosure or printing large components with a less warping material, such as PETG.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eProduces a slight odor of burned plastic during printing (less than ABS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eContains styrene (potentially harmful fumes). We recommend printing in a well-ventilated area or using an enclosure with active filtration.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSlightly hygroscopic (absorbs moisture)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003cthead class=\"voxel-product-description-table-head\"\u003e\n\u003ctr\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003eParameter\u003c\/th\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eNozzle Temperature\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e260 ±5 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eHeatbed Temperature\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e110 ±5 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eRecommended Steel Sheet\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSatin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eRecommended Nozzle\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e0.4 mm brass nozzle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSupported Prusa Print Profiles\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eAll Prusa FDM 3D printers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eFilament Diameter\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eFilament Diameter Tolerance\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e±0.04 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e"}
Prusament ASA 1.75mm 800g (NFC)
$41.99
Summary Prusament is a premium-grade material made by the same people who build the printers. Every spool is manufactured in-house with consistent color and high diameter precision. You can verify it yourself, down to the last meter. Description Why To Choose Prusament Guaranteed Color Consistency Every Prusament color is formulated and lo...
{"id":9301212332268,"title":"Bambu Lab Filament Buffer - H2D \u0026 H2C","handle":"bambu-lab-filament-buffer-h2d-h2c","description":"\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003eThe Filament Buffer is used to regulate the filament movement, ensuring an appropriate and stable supply of filament to the hotend.\u003c\/p\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003ch3\u003eInstallation\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eLearn more about the H2D\/H2C Filament Buffer on \u003ca class=\"voxel-product-description-link\" href=\"https:\/\/wiki.bambulab.com\/en\/h2\/maintenance\/replace-filament-buffer\" target=\"_blank\"\u003eBambu Lab Wiki\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eIn the Box\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e- Filament Buffer*1\u003c\/p\u003e\n\u003cp\u003e- BT3-8 Screw*4\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eH2D \u0026amp; H2C\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003cthead class=\"voxel-product-description-table-head\"\u003e\n\u003ctr\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003eParameter\u003c\/th\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eMaterials\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eMetal, Plastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eColor\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eBlack, Orange\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePackaging Size\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e100 × 135 × 45 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePackaging Weight\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e0.121 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","published_at":"2026-06-28T15:13:00-04:00","created_at":"2026-06-28T15:12:59-04:00","vendor":"Bambu Lab","type":"bambu Lab parts","tags":["H2C","H2D","H2D Pro"],"price":4199,"price_min":4199,"price_max":4199,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47840045695212,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"BBL-FLM-BUF-HDC-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Bambu Lab Filament Buffer - H2D \u0026 H2C","public_title":null,"options":["Default Title"],"price":4199,"weight":124,"compare_at_price":null,"inventory_quantity":-6,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6937285514134","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_Filament_Buffer_H2D_H2C_Product_Picture.webp?v=1782673619"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_Filament_Buffer_H2D_H2C_Product_Picture.webp?v=1782673619","options":["Title"],"media":[{"alt":"Bambu Lab Filament Buffer H2D \u0026 H2C","id":37410955854060,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_Filament_Buffer_H2D_H2C_Product_Picture.webp?v=1782673619"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_Filament_Buffer_H2D_H2C_Product_Picture.webp?v=1782673619","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003eThe Filament Buffer is used to regulate the filament movement, ensuring an appropriate and stable supply of filament to the hotend.\u003c\/p\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003ch3\u003eInstallation\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eLearn more about the H2D\/H2C Filament Buffer on \u003ca class=\"voxel-product-description-link\" href=\"https:\/\/wiki.bambulab.com\/en\/h2\/maintenance\/replace-filament-buffer\" target=\"_blank\"\u003eBambu Lab Wiki\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eIn the Box\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e- Filament Buffer*1\u003c\/p\u003e\n\u003cp\u003e- BT3-8 Screw*4\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eH2D \u0026amp; H2C\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003cthead class=\"voxel-product-description-table-head\"\u003e\n\u003ctr\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003eParameter\u003c\/th\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eMaterials\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eMetal, Plastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eColor\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eBlack, Orange\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePackaging Size\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e100 × 135 × 45 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePackaging Weight\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e0.121 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e"}
Bambu Lab Filament Buffer - H2D & H2C
$41.99
Summary The Filament Buffer is used to regulate the filament movement, ensuring an appropriate and stable supply of filament to the hotend. Description Installation Learn more about the H2D/H2C Filament Buffer on Bambu Lab Wiki. In the Box - Filament Buffer*1 - BT3-8 Screw*4 Compatibility H2D & H2C Specifications Pa...
