{"id":8238381400300,"title":"Spare Sheet for Bambu High Temperature Plate (Smooth PEI)","handle":"spare-sheet-for-bambu-lab-high-temp-plate-2pcs","description":"\u003cdiv id=\"shopify-section-template--16384921633008__product-description\" class=\"shopify-section\" data-mce-fragment=\"1\"\u003e\n\u003csection class=\"Product Product--\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"ProductMeta__Description\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"Rte\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"pct pct_mc\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"pct pct_mc\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"pct_t-stpc\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"pct_st-p\" data-mce-fragment=\"1\"\u003e\n\u003ch3 class=\"pct_st\" data-mce-fragment=\"1\"\u003eOverview\u003c\/h3\u003e\n\u003cp class=\"pct_p\" data-mce-fragment=\"1\"\u003eThe Bambu High-Temperature Sheet (Smooth PEI) is a sheet with an adhesive side for replacing the sheet on your High-Temperature Plate.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_st-p\" data-mce-fragment=\"1\"\u003e\n\u003ch3 class=\"pct_st\" data-mce-fragment=\"1\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp class=\"pct_p\" data-mce-fragment=\"1\"\u003eX1 Series and P1 Series\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_st-p\" data-mce-fragment=\"1\"\u003e\n\u003ch3 class=\"pct_st\" data-mce-fragment=\"1\"\u003eNote\u003c\/h3\u003e\n\u003cp class=\"pct_p\" data-mce-fragment=\"1\"\u003eThe Bambu High-Temperature sheet is easy to replace and install.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAfter tearing off the original sheet, please use alcohol to wipe the surface clean. Make sure the surface stays dry while applying a new sheet.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eYou can use an anhydrous ethanol solution or isopropanol solution with a concentration of over 90% to wipe the plate.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eYou can also use detergent and water to clean the surface.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"pct_st-p\" data-mce-fragment=\"1\"\u003e\n\u003cp class=\"pct_p\" data-mce-fragment=\"1\"\u003eIt is also best to use special solid glue (Glue Stick for Build Plate) before printing to avoid damage during model removal.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct pct_mc\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"pct_t-stpc\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"pct_st-p\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"pct_st-p\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"embed-container\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"VideoWrapper\" data-mce-fragment=\"1\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/W1EMD77gOkQ\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.youtube.com\/embed\/W1EMD77gOkQ\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cp class=\"pct_p\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eHINTS:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eThe STL file of the \"Fixture\" shown in the video can be found in the printer internal memory or download\u003ca href=\"https:\/\/wiki.bambulab.com\/en\/knowledge-sharing\/Links-to-STL-models\" rel=\"noopener\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/wiki.bambulab.com\/en\/knowledge-sharing\/Links-to-STL-models\" target=\"_blank\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003efrom here!\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cdiv class=\"pct_t-stpc\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"pct_st-p\" data-mce-fragment=\"1\"\u003e\n\u003ch3 class=\"pct_st\" data-mce-fragment=\"1\"\u003eHow to print your Film Sticking Fixture？\u003c\/h3\u003e\n\u003cp class=\"pct_p\" data-mce-fragment=\"1\"\u003eBambu Lab 3D printer with two film sticking fixture models to help you change spare sheets. Print 'Film Sticking Fixture' from the built-in files.\u003c\/p\u003e\n\u003cdiv class=\"pct pct_mc\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"pct_st-tb\" data-mce-fragment=\"1\"\u003e\n\u003ch3 class=\"pct_st\" data-mce-fragment=\"1\"\u003eRecommended settings for Bambu High-Temperature Plate\u003c\/h3\u003e\n\u003cp class=\"pct_p\" data-mce-fragment=\"1\"\u003ePlease note that other slicer settings might need to be adjusted based on the printed model and the filament requirements.\u003c\/p\u003e\n\u003cdiv class=\"TableWrapper\" data-mce-fragment=\"1\"\u003e\n\u003ctable class=\"pct_tb\" data-mce-fragment=\"1\"\u003e\n\u003cthead class=\"pct_th\" data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003eHotbed Temperature\u003c\/td\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003eGlue Stick Required?\u003c\/td\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003eUpper Glass Cover Plate Removed?\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr class=\"pct_tr\" data-mce-fragment=\"1\"\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003ePLA\/PLA-CF\/PLA-GF\u003c\/td\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003e45~60℃\u003c\/td\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003eRecommended\u003c\/td\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\" data-mce-fragment=\"1\"\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003eABS\u003c\/td\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003e90~100℃\u003c\/td\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003eRecommended\u003c\/td\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\" data-mce-fragment=\"1\"\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003ePETG\u003c\/td\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003e70℃\u003c\/td\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eNo\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\" data-mce-fragment=\"1\"\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003eTPU\u003c\/td\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003e35℃\u003c\/td\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003eRecommended\u003c\/td\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\" data-mce-fragment=\"1\"\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003eASA\u003c\/td\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003e90~100℃\u003c\/td\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003eRecommended\u003c\/td\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\" data-mce-fragment=\"1\"\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003ePVA\u003c\/td\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003e45~60℃\u003c\/td\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003eRecommended\u003c\/td\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\" data-mce-fragment=\"1\"\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003ePC\/PC-CF\u003c\/td\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003e100~110℃\u003c\/td\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\" data-mce-fragment=\"1\"\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003ePA\/PAHT-CF\u003c\/td\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003e100~110℃\u003c\/td\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"shopify-section-footer\" class=\"shopify-section shopify-section--footer\" data-mce-fragment=\"1\"\u003e\u003cfooter id=\"section-footer\" data-section-id=\"footer\" data-section-type=\"footer\" class=\"Footer\" role=\"contentinfo\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"Container\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"Footer__Inner\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"Footer__Block Footer__Block--links\" data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/footer\u003e\u003c\/div\u003e","published_at":"2024-03-13T13:37:27-04:00","created_at":"2024-03-13T13:01:54-04:00","vendor":"Bambu Lab","type":"bambu Lab parts","tags":["Bambu Lab","P1P","P1S","Parts","X1C","X1E"],"price":2099,"price_min":2099,"price_max":2099,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":44567100358892,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"BBL-XP1-SHT-HT0-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Spare Sheet for Bambu High Temperature Plate (Smooth PEI)","public_title":null,"options":["Default Title"],"price":2099,"weight":268,"compare_at_price":null,"inventory_quantity":-6,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6975337030751","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/Spare_Sheet_for_Bambu_High_Temperature_Plate_Smooth_PEI_Product_Picture.webp?v=1739810193"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Spare_Sheet_for_Bambu_High_Temperature_Plate_Smooth_PEI_Product_Picture.webp?v=1739810193","options":["Title"],"media":[{"alt":"Spare Sheet for Bambu High Temperature Plate (Smooth PEI) - Voxel Factory -3D printer- Imprimante 3D","id":33864918925548,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Spare_Sheet_for_Bambu_High_Temperature_Plate_Smooth_PEI_Product_Picture.webp?v=1739810193"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Spare_Sheet_for_Bambu_High_Temperature_Plate_Smooth_PEI_Product_Picture.webp?v=1739810193","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv id=\"shopify-section-template--16384921633008__product-description\" class=\"shopify-section\" data-mce-fragment=\"1\"\u003e\n\u003csection class=\"Product Product--\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"ProductMeta__Description\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"Rte\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"pct pct_mc\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"pct pct_mc\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"pct_t-stpc\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"pct_st-p\" data-mce-fragment=\"1\"\u003e\n\u003ch3 class=\"pct_st\" data-mce-fragment=\"1\"\u003eOverview\u003c\/h3\u003e\n\u003cp class=\"pct_p\" data-mce-fragment=\"1\"\u003eThe Bambu High-Temperature Sheet (Smooth PEI) is a sheet with an adhesive side for replacing the sheet on your High-Temperature Plate.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_st-p\" data-mce-fragment=\"1\"\u003e\n\u003ch3 class=\"pct_st\" data-mce-fragment=\"1\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp class=\"pct_p\" data-mce-fragment=\"1\"\u003eX1 Series and P1 Series\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_st-p\" data-mce-fragment=\"1\"\u003e\n\u003ch3 class=\"pct_st\" data-mce-fragment=\"1\"\u003eNote\u003c\/h3\u003e\n\u003cp class=\"pct_p\" data-mce-fragment=\"1\"\u003eThe Bambu High-Temperature sheet is easy to replace and install.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAfter tearing off the original sheet, please use alcohol to wipe the surface clean. Make sure the surface stays dry while applying a new sheet.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eYou can use an anhydrous ethanol solution or isopropanol solution with a concentration of over 90% to wipe the plate.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eYou can also use detergent and water to clean the surface.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"pct_st-p\" data-mce-fragment=\"1\"\u003e\n\u003cp class=\"pct_p\" data-mce-fragment=\"1\"\u003eIt is also best to use special solid glue (Glue Stick for Build Plate) before printing to avoid damage during model removal.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct pct_mc\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"pct_t-stpc\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"pct_st-p\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"pct_st-p\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"embed-container\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"VideoWrapper\" data-mce-fragment=\"1\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/W1EMD77gOkQ\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.youtube.com\/embed\/W1EMD77gOkQ\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cp class=\"pct_p\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eHINTS:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eThe STL file of the \"Fixture\" shown in the video can be found in the printer internal memory or download\u003ca href=\"https:\/\/wiki.bambulab.com\/en\/knowledge-sharing\/Links-to-STL-models\" rel=\"noopener\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/wiki.bambulab.com\/en\/knowledge-sharing\/Links-to-STL-models\" target=\"_blank\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003efrom here!\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cdiv class=\"pct_t-stpc\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"pct_st-p\" data-mce-fragment=\"1\"\u003e\n\u003ch3 class=\"pct_st\" data-mce-fragment=\"1\"\u003eHow to print your Film Sticking Fixture？\u003c\/h3\u003e\n\u003cp class=\"pct_p\" data-mce-fragment=\"1\"\u003eBambu Lab 3D printer with two film sticking fixture models to help you change spare sheets. Print 'Film Sticking Fixture' from the built-in files.\u003c\/p\u003e\n\u003cdiv class=\"pct pct_mc\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"pct_st-tb\" data-mce-fragment=\"1\"\u003e\n\u003ch3 class=\"pct_st\" data-mce-fragment=\"1\"\u003eRecommended settings for Bambu High-Temperature Plate\u003c\/h3\u003e\n\u003cp class=\"pct_p\" data-mce-fragment=\"1\"\u003ePlease note that other slicer settings might need to be adjusted based on the printed model and the filament requirements.\u003c\/p\u003e\n\u003cdiv class=\"TableWrapper\" data-mce-fragment=\"1\"\u003e\n\u003ctable class=\"pct_tb\" data-mce-fragment=\"1\"\u003e\n\u003cthead class=\"pct_th\" data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003eHotbed Temperature\u003c\/td\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003eGlue Stick Required?\u003c\/td\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003eUpper Glass Cover Plate Removed?\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr class=\"pct_tr\" data-mce-fragment=\"1\"\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003ePLA\/PLA-CF\/PLA-GF\u003c\/td\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003e45~60℃\u003c\/td\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003eRecommended\u003c\/td\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\" data-mce-fragment=\"1\"\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003eABS\u003c\/td\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003e90~100℃\u003c\/td\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003eRecommended\u003c\/td\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\" data-mce-fragment=\"1\"\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003ePETG\u003c\/td\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003e70℃\u003c\/td\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eNo\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\" data-mce-fragment=\"1\"\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003eTPU\u003c\/td\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003e35℃\u003c\/td\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003eRecommended\u003c\/td\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\" data-mce-fragment=\"1\"\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003eASA\u003c\/td\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003e90~100℃\u003c\/td\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003eRecommended\u003c\/td\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\" data-mce-fragment=\"1\"\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003ePVA\u003c\/td\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003e45~60℃\u003c\/td\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003eRecommended\u003c\/td\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\" data-mce-fragment=\"1\"\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003ePC\/PC-CF\u003c\/td\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003e100~110℃\u003c\/td\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\" data-mce-fragment=\"1\"\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003ePA\/PAHT-CF\u003c\/td\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003e100~110℃\u003c\/td\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd class=\"pct_td\" data-mce-fragment=\"1\"\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"shopify-section-footer\" class=\"shopify-section shopify-section--footer\" data-mce-fragment=\"1\"\u003e\u003cfooter id=\"section-footer\" data-section-id=\"footer\" data-section-type=\"footer\" class=\"Footer\" role=\"contentinfo\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"Container\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"Footer__Inner\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"Footer__Block Footer__Block--links\" data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/footer\u003e\u003c\/div\u003e"}
Spare Sheet for Bambu High Temperature Plate (Smooth PEI)
Produits Connexes
{"id":8896644907244,"title":"Clear Resin V4.1 1L (Form 3)","handle":"clear-resin-v4-1-1l-form-3","description":"\u003cp\u003eClear Resin is a rigid material that polishes to near optical transparency. It is ideal for working with light or showcasing internal features, printing see-through models and devices. Use Clear Resin to create clear prototype parts, LED housings, windows, fluidics, molds, optics, lighting, and any parts requiring translucency.\u003c\/p\u003e\n\u003cp\u003eClear Resin V4.1 is compatible with Form 3 Series printers only. Clear Resin V4.1 creates more color-neutral and transparent parts compared to Clear Resin V4.0.\u003c\/p\u003e","published_at":"2025-05-08T12:36:43-04:00","created_at":"2025-05-08T12:27:17-04:00","vendor":"Formlabs","type":"Résines Formlabs","tags":["1 Litre","Effacer","formlabs","resin","sla"],"price":21307,"price_min":21307,"price_max":21307,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":46424713068780,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"FLB-0F3-V41-CLR-01L","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Clear Resin V4.1 1L (Form 3)","public_title":null,"options":["Default Title"],"price":21307,"weight":1650,"compare_at_price":null,"inventory_quantity":-7,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Standard_Clear_Resin_V4_1_1L_Form3_Product_Picture.webp?v=1746721983"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Standard_Clear_Resin_V4_1_1L_Form3_Product_Picture.webp?v=1746721983","options":["Title"],"media":[{"alt":"Formlabs Standard Clear Resin V4.1 1L Form3 Product Picture","id":35335368900844,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Standard_Clear_Resin_V4_1_1L_Form3_Product_Picture.webp?v=1746721983"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Standard_Clear_Resin_V4_1_1L_Form3_Product_Picture.webp?v=1746721983","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eClear Resin is a rigid material that polishes to near optical transparency. It is ideal for working with light or showcasing internal features, printing see-through models and devices. Use Clear Resin to create clear prototype parts, LED housings, windows, fluidics, molds, optics, lighting, and any parts requiring translucency.\u003c\/p\u003e\n\u003cp\u003eClear Resin V4.1 is compatible with Form 3 Series printers only. Clear Resin V4.1 creates more color-neutral and transparent parts compared to Clear Resin V4.0.\u003c\/p\u003e"}
Clear Resin V4.1 1L (Form 3)
- St-Hubert Store : En calcul...
- Burnaby Store : En calcul...
$213.07
Clear Resin is a rigid material that polishes to near optical transparency. It is ideal for working with light or showcasing internal features, printing see-through models and devices. Use Clear Resin to create clear prototype parts, LED housings, windows, fluidics, molds, optics, lighting, and any parts requiring translucency. Clear Resin V4.1 ...
{"id":8896637993196,"title":"Black Resin V4.1 1L (Form 3)","handle":"black-resin-v4-1-1l-form-3","description":"\u003cp\u003eBlack Resin is perfect for general-purpose prototyping and design, and models with intricate details. With a matte surface finish, opaque appearance, and precise details, prints are ready to use right off the printer. Its neutral undertone makes a great base for parts that will eventually be painted or undergo other finishing processes.\u003c\/p\u003e\n\u003cp\u003eBlack Resin V4.1 is compatible with Form 3 Series printers only. Black Resin V4.1 produces deeper black parts and offers improved print reliability compared to Black Resin V4.0.\u003c\/p\u003e","published_at":"2025-05-08T12:24:53-04:00","created_at":"2025-05-08T12:13:53-04:00","vendor":"Formlabs","type":"Résines Formlabs","tags":["1 Litre","black","formlabs","resin","sla"],"price":21307,"price_min":21307,"price_max":21307,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":46424692162796,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"FLB-0F3-V41-BLK-01L","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Black Resin V4.1 1L (Form 3)","public_title":null,"options":["Default Title"],"price":21307,"weight":1650,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Standard_Black_Resin_V4_1_1L_Form3_Product_Picture.webp?v=1746721226"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Standard_Black_Resin_V4_1_1L_Form3_Product_Picture.webp?v=1746721226","options":["Title"],"media":[{"alt":"Formlabs Standard Black Resin V4.1 1L Form3 Product Picture","id":35335323582700,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Standard_Black_Resin_V4_1_1L_Form3_Product_Picture.webp?v=1746721226"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Standard_Black_Resin_V4_1_1L_Form3_Product_Picture.webp?v=1746721226","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eBlack Resin is perfect for general-purpose prototyping and design, and models with intricate details. With a matte surface finish, opaque appearance, and precise details, prints are ready to use right off the printer. Its neutral undertone makes a great base for parts that will eventually be painted or undergo other finishing processes.\u003c\/p\u003e\n\u003cp\u003eBlack Resin V4.1 is compatible with Form 3 Series printers only. Black Resin V4.1 produces deeper black parts and offers improved print reliability compared to Black Resin V4.0.\u003c\/p\u003e"}
Black Resin V4.1 1L (Form 3)
- St-Hubert Store : En calcul...
- Burnaby Store : En calcul...
$213.07
Black Resin is perfect for general-purpose prototyping and design, and models with intricate details. With a matte surface finish, opaque appearance, and precise details, prints are ready to use right off the printer. Its neutral undertone makes a great base for parts that will eventually be painted or undergo other finishing processes. Black Re...
{"id":8896630620396,"title":"White Resin V4.1 1L (Form 3)","handle":"whitr-resin-v4-1-1l-form-3","description":"\u003cp\u003eWhite Resin is perfect for general-purpose prototyping and design, and models with intricate details. With a matte surface finish, opaque appearance, and precise details, prints are ready to use right off the printer. Its neutral undertone makes a great base for parts that will eventually be painted or undergo other finishing processes.\u003c\/p\u003e\n\u003cp\u003eWhite Resin V4.1 is compatible with Form 3 Series printers only. White Resin V4.1 produces brighter white parts compared to White Resin V4.0.\u003c\/p\u003e","published_at":"2025-05-08T12:10:32-04:00","created_at":"2025-05-08T11:56:50-04:00","vendor":"Formlabs","type":"Résines Formlabs","tags":["1 Litre","formlabs","resin","sla","white"],"price":21307,"price_min":21307,"price_max":21307,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":46424657953004,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"FLB-0F3-V41-WHI-01L","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"White Resin V4.1 1L (Form 3)","public_title":null,"options":["Default Title"],"price":21307,"weight":1650,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Standard_White_Resin_V4_1_1L_Form3_Product_Picture.webp?v=1746720355"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Standard_White_Resin_V4_1_1L_Form3_Product_Picture.webp?v=1746720355","options":["Title"],"media":[{"alt":"Formlabs Standard White Resin V4.1 1L orm3 Product Picture","id":35335261847788,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Standard_White_Resin_V4_1_1L_Form3_Product_Picture.webp?v=1746720355"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Standard_White_Resin_V4_1_1L_Form3_Product_Picture.webp?v=1746720355","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eWhite Resin is perfect for general-purpose prototyping and design, and models with intricate details. With a matte surface finish, opaque appearance, and precise details, prints are ready to use right off the printer. Its neutral undertone makes a great base for parts that will eventually be painted or undergo other finishing processes.\u003c\/p\u003e\n\u003cp\u003eWhite Resin V4.1 is compatible with Form 3 Series printers only. White Resin V4.1 produces brighter white parts compared to White Resin V4.0.\u003c\/p\u003e"}
White Resin V4.1 1L (Form 3)
- St-Hubert Store : En calcul...
- Burnaby Store : En calcul...
$213.07
White Resin is perfect for general-purpose prototyping and design, and models with intricate details. With a matte surface finish, opaque appearance, and precise details, prints are ready to use right off the printer. Its neutral undertone makes a great base for parts that will eventually be painted or undergo other finishing processes. White Re...
{"id":8896623902956,"title":"Grey Resin V4.1 1L (Form 3)","handle":"grey-resin-v4-1-1l-form-3","description":"\u003cp\u003eGrey Resin is perfect for general-purpose prototyping and design, and models with intricate details. With a matte surface finish, opaque appearance, and precise details, prints are ready to use right off the printer. Its neutral undertone makes a great base for parts that will eventually be painted or undergo other finishing processes.\u003c\/p\u003e\n\u003cp\u003eGrey Resin V4.1 is compatible with Form 3 Series printers only. Grey Resin V4.1 produces tougher parts compared to Grey Resin V4 (Legacy).\u003c\/p\u003e","published_at":"2025-05-08T11:54:55-04:00","created_at":"2025-05-08T11:41:24-04:00","vendor":"Formlabs","type":"Résines Formlabs","tags":["1 Litre","formlabs","grey","resin","sla"],"price":21307,"price_min":21307,"price_max":21307,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":46424606900460,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"FLB-0F3-V41-GRY-01L","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Grey Resin V4.1 1L (Form 3)","public_title":null,"options":["Default Title"],"price":21307,"weight":1650,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Standard_Gray_Resin_V4_1_1L_Form3_Product_Picture.webp?v=1746719400"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Standard_Gray_Resin_V4_1_1L_Form3_Product_Picture.webp?v=1746719400","options":["Title"],"media":[{"alt":"Formlabs Standard Gray Resin V4.1 1L Form3 Product Picture","id":35335189364972,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Standard_Gray_Resin_V4_1_1L_Form3_Product_Picture.webp?v=1746719400"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Standard_Gray_Resin_V4_1_1L_Form3_Product_Picture.webp?v=1746719400","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eGrey Resin is perfect for general-purpose prototyping and design, and models with intricate details. With a matte surface finish, opaque appearance, and precise details, prints are ready to use right off the printer. Its neutral undertone makes a great base for parts that will eventually be painted or undergo other finishing processes.\u003c\/p\u003e\n\u003cp\u003eGrey Resin V4.1 is compatible with Form 3 Series printers only. Grey Resin V4.1 produces tougher parts compared to Grey Resin V4 (Legacy).\u003c\/p\u003e"}
Grey Resin V4.1 1L (Form 3)
- St-Hubert Store : En calcul...
- Burnaby Store : En calcul...
$213.07
Grey Resin is perfect for general-purpose prototyping and design, and models with intricate details. With a matte surface finish, opaque appearance, and precise details, prints are ready to use right off the printer. Its neutral undertone makes a great base for parts that will eventually be painted or undergo other finishing processes. Grey Resi...
{"id":8896606601452,"title":"Grey Resin V4.1 5L (Form 3)","handle":"grey-resin-v4-1-5l-form-3","description":"\u003cp\u003eGrey Resin is perfect for general-purpose prototyping and design, and models with intricate details. With a matte surface finish, opaque appearance, and precise details, prints are ready to use right off the printer. Its neutral undertone makes a great base for parts that will eventually be painted or undergo other finishing processes.\u003c\/p\u003e\n\u003cp\u003eGrey Resin V4.1 is compatible with Form 3 Series printers only. Grey Resin V4.1 produces tougher parts compared to Grey Resin V4 (Legacy).\u003c\/p\u003e","published_at":"2025-05-08T11:39:27-04:00","created_at":"2025-05-08T10:41:35-04:00","vendor":"Formlabs","type":"Résines Formlabs","tags":["5 Liter","formlabs","grey","resin","sla"],"price":95810,"price_min":95810,"price_max":95810,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":46424502665452,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"FLB-0F3-V41-GRY-05L","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Grey Resin V4.1 5L (Form 3)","public_title":null,"options":["Default Title"],"price":95810,"weight":6300,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Standard_Gray_Resin_V4.1_5L_Form3_Product_Picture.webp?v=1746719462"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Standard_Gray_Resin_V4.1_5L_Form3_Product_Picture.webp?v=1746719462","options":["Title"],"media":[{"alt":"Formlabs Standard Gray Resinm V4.1 5L Form3 Product Picture","id":35335089750252,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Standard_Gray_Resin_V4.1_5L_Form3_Product_Picture.webp?v=1746719462"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Standard_Gray_Resin_V4.1_5L_Form3_Product_Picture.webp?v=1746719462","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eGrey Resin is perfect for general-purpose prototyping and design, and models with intricate details. With a matte surface finish, opaque appearance, and precise details, prints are ready to use right off the printer. Its neutral undertone makes a great base for parts that will eventually be painted or undergo other finishing processes.\u003c\/p\u003e\n\u003cp\u003eGrey Resin V4.1 is compatible with Form 3 Series printers only. Grey Resin V4.1 produces tougher parts compared to Grey Resin V4 (Legacy).\u003c\/p\u003e"}
Grey Resin V4.1 5L (Form 3)
- St-Hubert Store : En calcul...
- Burnaby Store : En calcul...
$958.10
Grey Resin is perfect for general-purpose prototyping and design, and models with intricate details. With a matte surface finish, opaque appearance, and precise details, prints are ready to use right off the printer. Its neutral undertone makes a great base for parts that will eventually be painted or undergo other finishing processes. Grey Resi...
{"id":8896161939692,"title":"Polymaker PolySupport for PA12 1.75mm 500g","handle":"polymaker-polysupport-for-pa12-1-75mm-500g","description":"\u003cp\u003e\u003cspan\u003ePolySupport™ is a break away support for Polymaker Nylon 12 based filaments. It has a perfect interface with Nylon 12, strong enough to support it and easily removable by hand\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003ePrint Settings\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003ePrinting Temperature: 270˚C - 300˚CBed Temperature: 50˚C - 80˚CPrinting Speed: 50mm\/s - 150mm\/sFan: OFF\u003cbr\u003e\u003cbr\u003eDirect Drive:\u003cbr\u003eRetraction Distance: 1mm\u003cbr\u003eRetraction Speed: 20mm\/s\u003cbr\u003eIndirect Drive:\u003cbr\u003eRetraction Distance: 3mm\u003cbr\u003eRetraction Speed: 40mm\/s\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eFAQ\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use PolySupport™ with other materials than Nylon 12?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe have designed PolySupport™ specifically for Nylon 12. However we had positive customer feedback on using PolySupport™ PA12-CF products as well.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan PolySupport™ dissolve in water?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo, PolySupport™ is a breakaway support: it requires mechanical removal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill the spools work in an AMS?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes! We have redesigned the edges of our spools so all Polymaker products will now spin great in the AMS.\u003c\/p\u003e\n\u003cp\u003eThat said - we will always recommend using a multi nozzle extruder when printing with more than one material type to help prevent clogs.\u003c\/p\u003e\n\u003cp\u003eIt is possible to print PA and PolySupport out of a single nozzle but you need to make sure you properly purge all of the previous material when swapping. IDEX or Tool Changer recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this material food safe?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUnfortunately we do not have any data whether this material is food safe. As of now, no 3D printing material on the market is FDA food safe compliant. This is because in order to be certified as food safe, the actual object needs to be certified and not the base material. The shape, bed used, environment the object was made, and much more goes into getting a food safety certificate. As of now there is no real certification that the FDA offers for 3D printing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo you sell refills?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe are sorry but we do not sell refills at this time\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this material recyclable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUnfortunately there is no great answer for recycling PLA at this time. Our cardboard spools are biodegradable but there is no great way to recycle PLA at this time.\u003c\/p\u003e","published_at":"2025-05-07T17:04:09-04:00","created_at":"2025-05-07T16:31:59-04:00","vendor":"Polymaker","type":"Polymaker 1.75mm filaments","tags":["1.75mm","Breakaway","Filaments","PolySupport"],"price":5699,"price_min":5699,"price_max":5699,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":46423089021164,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PMK-PSP-PA12-175-500","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Polymaker PolySupport for PA12 1.75mm 500g","public_title":null,"options":["Default Title"],"price":5699,"weight":850,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/Polymaker_PolySupport_for_PA12_1.75mm500g_Product_Picture.webp?v=1746650909"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Polymaker_PolySupport_for_PA12_1.75mm500g_Product_Picture.webp?v=1746650909","options":["Title"],"media":[{"alt":"Polymaker PolySupport for PA12 1.75mm500g Product Picture","id":35332618846444,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Polymaker_PolySupport_for_PA12_1.75mm500g_Product_Picture.webp?v=1746650909"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Polymaker_PolySupport_for_PA12_1.75mm500g_Product_Picture.webp?v=1746650909","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003ePolySupport™ is a break away support for Polymaker Nylon 12 based filaments. It has a perfect interface with Nylon 12, strong enough to support it and easily removable by hand\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003ePrint Settings\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003ePrinting Temperature: 270˚C - 300˚CBed Temperature: 50˚C - 80˚CPrinting Speed: 50mm\/s - 150mm\/sFan: OFF\u003cbr\u003e\u003cbr\u003eDirect Drive:\u003cbr\u003eRetraction Distance: 1mm\u003cbr\u003eRetraction Speed: 20mm\/s\u003cbr\u003eIndirect Drive:\u003cbr\u003eRetraction Distance: 3mm\u003cbr\u003eRetraction Speed: 40mm\/s\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eFAQ\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use PolySupport™ with other materials than Nylon 12?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe have designed PolySupport™ specifically for Nylon 12. However we had positive customer feedback on using PolySupport™ PA12-CF products as well.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan PolySupport™ dissolve in water?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo, PolySupport™ is a breakaway support: it requires mechanical removal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill the spools work in an AMS?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes! We have redesigned the edges of our spools so all Polymaker products will now spin great in the AMS.\u003c\/p\u003e\n\u003cp\u003eThat said - we will always recommend using a multi nozzle extruder when printing with more than one material type to help prevent clogs.\u003c\/p\u003e\n\u003cp\u003eIt is possible to print PA and PolySupport out of a single nozzle but you need to make sure you properly purge all of the previous material when swapping. IDEX or Tool Changer recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this material food safe?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUnfortunately we do not have any data whether this material is food safe. As of now, no 3D printing material on the market is FDA food safe compliant. This is because in order to be certified as food safe, the actual object needs to be certified and not the base material. The shape, bed used, environment the object was made, and much more goes into getting a food safety certificate. As of now there is no real certification that the FDA offers for 3D printing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo you sell refills?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe are sorry but we do not sell refills at this time\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this material recyclable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUnfortunately there is no great answer for recycling PLA at this time. Our cardboard spools are biodegradable but there is no great way to recycle PLA at this time.\u003c\/p\u003e"}
Polymaker PolySupport for PA12 1.75mm 500g
- St-Hubert Store : En calcul...
- Burnaby Store : En calcul...
$56.99
PolySupport™ is a break away support for Polymaker Nylon 12 based filaments. It has a perfect interface with Nylon 12, strong enough to support it and easily removable by hand Print Settings Printing Temperature: 270˚C - 300˚CBed Temperature: 50˚C - 80˚CPrinting Speed: 50mm/s - 150mm/sFan: OFFDirect Drive:Retraction Distance: 1mmRetraction Speed...
{"id":8896103612652,"title":"Polymaker Fiberon PA612-CF15 1.75mm 500g","handle":"polymaker-fiberon-pa612-cf15-1-75mm-500g","description":"\u003cp\u003e\u003cspan\u003eFiberon™ PA612-CF15 is a carbon fiber reinforced long chain copolyimide filament. Thanks to its chemical structure, this product has lower moisture sensitivity compared to PA6\/66 and PA6-based materials, and better mechanical properties than PA12-based materials. In addition, the carbon fiber reinforcement and Warpfree™ technology enhance the size stability of the prints produced with this material.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eFiberon™ PA612-CF15 is the same great formula as PolyMide PA612-CF, although Fiberon™ PA612-CF15 may print in a slightly darker black shade color than its predecessor.\u003c\/p\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003ch5\u003ePrint settings\u003c\/h5\u003e\n\u003cp\u003ePrinting Temperature: 250˚C - 300˚C\u003cbr\u003eBuild Plate Temperature: 40˚C - 50˚C\u003cbr\u003eChamber Temperature: Room Temperature\u003cbr\u003ePrinting Speed: up to 300mm\/s\u003cbr\u003eCooling Fan: OFF\u003cbr\u003e\u003cbr\u003eDirect Drive:\u003cbr\u003eRetraction Distance: 3mm\u003cbr\u003eRetraction Speed: 40mm\/s\u003cbr\u003eIndirect Drive:\u003cbr\u003eRetraction Distance: 6mm\u003cbr\u003eRetraction Speed: 60mm\/s\u003cbr\u003e\u003cbr\u003eRecommended Drying Settings:\u003cbr\u003eRegular Oven: 100˚C for 10h\u003cbr\u003ePolyDryer: Level 3 for 18h (\u003ca href=\"\/fr\/collections\/fdm-3d-printer-add-ons\/products\/polymaker-polydryer\" target=\"_blank\"\u003ePolyDryer™\u003c\/a\u003e)\u003cbr\u003e(Only if the material has absorbed moisture)\u003cbr\u003e\u003cbr\u003eAnnealing Settings: 100˚C for 16h\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrinter Profiles:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Bambu-Lab_X1C_Bambu-Studio_0.4_Fiberon-PA612-CF.zip\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Qidi_Q1Pro_OrcaSlicer_0.4_Fiberon-PA612-CF15.zip\" target=\"_blank\"\u003eQIDI Tech\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Raise3D_E2CF_IdeaMaker_0.4_Fiberon-PA612-CF15.zip\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCan't find your profile? Join our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/discord.polymaker.com\/\" target=\"_blank\"\u003eDiscord\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003eand see if the community has made one already!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrinting Requirements\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cul\u003e\n\u003cli\u003eAll-metal hotend 250˚C+ recommended\u003c\/li\u003e\n\u003cli\u003eHardened nozzle\u003c\/li\u003e\n\u003cli\u003eFilament dryer\u003c\/li\u003e\n\u003cli\u003eAnnealing post printing\u003c\/li\u003e\n\u003cli\u003eMoisture conditioning after Annealing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch5\u003eFAQ\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is annealing?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou can find out more about annealing\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/us.polymaker.com\/blogs\/3d-printing-tips\/what-is-annealing-and-why-do-we-do-it\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is moisture conditioning?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMoisture conditioning refers to allowing the print to absorb moisture. This is inevitble since nylons are hygroscopic, but you can expedite the process by keeping the print in a high humidity climate, or submerging them in water, for 48 hours. All of our test specimens were annealed at 100˚C for 16 hours, and then immerged in water at 60˚C for 48 hours. The average moisture content of specimens is 2.57%.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I anneal before or after moisture conditioning?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen you anneal in a convection oven, you will dry the part out. So if you moisture condition before annealing - you will need to moisture condition again after. So we would suggest to moisture condition after annealing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy do you use such a low build plate temperature with your nylons?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur nylons come with our Warp-Free™ Technology. In order for this Warp-Free™ technology to work as it should - we want to make sure the build plate and the ambient air temperatures are both below 50˚C. We then anneal the print after to get it's full strength.\u003c\/p\u003e\n\u003cp\u003eLearn more\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/us.polymaker.com\/blogs\/finding-the-right-filament\/polymakers-technologies\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill the spools work in an AMS?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes! We have redesigned the edges of our spools so all Polymaker products will now spin great in the AMS.\u003c\/p\u003e\n\u003cp\u003eThat said - you will need to be careful when using any abrasive materials in the AMS.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan you offer 1KG Fiberon™ Spool Options?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUnfortunately we are not offering 1KG Fiberon™ options and this has to do with the increased chance of carbon fiber and glass fiber filament snapping on the spool. Since carbon fiber and glass fiber filament is more brittle, we spool these with a larger core. This larger core means that 1KG of filament will not fit on a 1KG spool.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2025-05-07T15:51:14-04:00","created_at":"2025-05-07T14:50:28-04:00","vendor":"Polymaker","type":"Polymaker 1.75mm filaments","tags":["1.75mm","carbon fiber","Fiberon","Filaments","nylon","PA612"],"price":4899,"price_min":4899,"price_max":4899,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":46422938517740,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PMK-FBR-PA612-CF15-500","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Polymaker Fiberon PA612-CF15 1.75mm 500g","public_title":null,"options":["Default Title"],"price":4899,"weight":850,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/Polymaker_Fiberon_PA612-CF15_1.75mm500g_Product_Picture.webp?v=1746647162"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Polymaker_Fiberon_PA612-CF15_1.75mm500g_Product_Picture.webp?v=1746647162","options":["Title"],"media":[{"alt":"Polymaker Fiberon PA612-CF15 1.75mm500g Product Picture","id":35332451303660,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Polymaker_Fiberon_PA612-CF15_1.75mm500g_Product_Picture.webp?v=1746647162"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Polymaker_Fiberon_PA612-CF15_1.75mm500g_Product_Picture.webp?v=1746647162","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003eFiberon™ PA612-CF15 is a carbon fiber reinforced long chain copolyimide filament. Thanks to its chemical structure, this product has lower moisture sensitivity compared to PA6\/66 and PA6-based materials, and better mechanical properties than PA12-based materials. In addition, the carbon fiber reinforcement and Warpfree™ technology enhance the size stability of the prints produced with this material.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eFiberon™ PA612-CF15 is the same great formula as PolyMide PA612-CF, although Fiberon™ PA612-CF15 may print in a slightly darker black shade color than its predecessor.\u003c\/p\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003ch5\u003ePrint settings\u003c\/h5\u003e\n\u003cp\u003ePrinting Temperature: 250˚C - 300˚C\u003cbr\u003eBuild Plate Temperature: 40˚C - 50˚C\u003cbr\u003eChamber Temperature: Room Temperature\u003cbr\u003ePrinting Speed: up to 300mm\/s\u003cbr\u003eCooling Fan: OFF\u003cbr\u003e\u003cbr\u003eDirect Drive:\u003cbr\u003eRetraction Distance: 3mm\u003cbr\u003eRetraction Speed: 40mm\/s\u003cbr\u003eIndirect Drive:\u003cbr\u003eRetraction Distance: 6mm\u003cbr\u003eRetraction Speed: 60mm\/s\u003cbr\u003e\u003cbr\u003eRecommended Drying Settings:\u003cbr\u003eRegular Oven: 100˚C for 10h\u003cbr\u003ePolyDryer: Level 3 for 18h (\u003ca href=\"\/fr\/collections\/fdm-3d-printer-add-ons\/products\/polymaker-polydryer\" target=\"_blank\"\u003ePolyDryer™\u003c\/a\u003e)\u003cbr\u003e(Only if the material has absorbed moisture)\u003cbr\u003e\u003cbr\u003eAnnealing Settings: 100˚C for 16h\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrinter Profiles:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Bambu-Lab_X1C_Bambu-Studio_0.4_Fiberon-PA612-CF.zip\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Qidi_Q1Pro_OrcaSlicer_0.4_Fiberon-PA612-CF15.zip\" target=\"_blank\"\u003eQIDI Tech\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Raise3D_E2CF_IdeaMaker_0.4_Fiberon-PA612-CF15.zip\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCan't find your profile? Join our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/discord.polymaker.com\/\" target=\"_blank\"\u003eDiscord\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003eand see if the community has made one already!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrinting Requirements\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cul\u003e\n\u003cli\u003eAll-metal hotend 250˚C+ recommended\u003c\/li\u003e\n\u003cli\u003eHardened nozzle\u003c\/li\u003e\n\u003cli\u003eFilament dryer\u003c\/li\u003e\n\u003cli\u003eAnnealing post printing\u003c\/li\u003e\n\u003cli\u003eMoisture conditioning after Annealing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch5\u003eFAQ\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is annealing?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou can find out more about annealing\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/us.polymaker.com\/blogs\/3d-printing-tips\/what-is-annealing-and-why-do-we-do-it\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is moisture conditioning?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMoisture conditioning refers to allowing the print to absorb moisture. This is inevitble since nylons are hygroscopic, but you can expedite the process by keeping the print in a high humidity climate, or submerging them in water, for 48 hours. All of our test specimens were annealed at 100˚C for 16 hours, and then immerged in water at 60˚C for 48 hours. The average moisture content of specimens is 2.57%.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I anneal before or after moisture conditioning?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen you anneal in a convection oven, you will dry the part out. So if you moisture condition before annealing - you will need to moisture condition again after. So we would suggest to moisture condition after annealing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy do you use such a low build plate temperature with your nylons?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur nylons come with our Warp-Free™ Technology. In order for this Warp-Free™ technology to work as it should - we want to make sure the build plate and the ambient air temperatures are both below 50˚C. We then anneal the print after to get it's full strength.\u003c\/p\u003e\n\u003cp\u003eLearn more\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/us.polymaker.com\/blogs\/finding-the-right-filament\/polymakers-technologies\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill the spools work in an AMS?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes! We have redesigned the edges of our spools so all Polymaker products will now spin great in the AMS.\u003c\/p\u003e\n\u003cp\u003eThat said - you will need to be careful when using any abrasive materials in the AMS.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan you offer 1KG Fiberon™ Spool Options?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUnfortunately we are not offering 1KG Fiberon™ options and this has to do with the increased chance of carbon fiber and glass fiber filament snapping on the spool. Since carbon fiber and glass fiber filament is more brittle, we spool these with a larger core. This larger core means that 1KG of filament will not fit on a 1KG spool.\u003c\/p\u003e\n\u003c\/div\u003e"}
Polymaker Fiberon PA612-CF15 1.75mm 500g
- St-Hubert Store : En calcul...
- Burnaby Store : En calcul...
$48.99
Fiberon™ PA612-CF15 is a carbon fiber reinforced long chain copolyimide filament. Thanks to its chemical structure, this product has lower moisture sensitivity compared to PA6/66 and PA6-based materials, and better mechanical properties than PA12-based materials. In addition, the carbon fiber reinforcement and Warpfree™ technology enhance the si...
{"id":8896072351980,"title":"Polymaker Fiberon PET-CF17 1.75mm 500g","handle":"polymaker-fiberon-pet-cf17-1-75mm-500g","description":"\u003cp\u003e\u003cspan\u003eFiberon™ PET-CF17 is a carbon fiber reinforced PET (polyethylene terephthalate) filament. It's the preferred choice for engineering 3D printing composite materials, featuring high modulus, heat resistance, moisture insensitivity, and ease of printing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"product-details__block product-details__text rte\"\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003ch5\u003ePrint settings\u003c\/h5\u003e\n\u003cp\u003ePrinting Temperature: 270˚C - 300˚C\u003cbr\u003eBuild Plate Temperature: 70˚C - 80˚C\u003cbr\u003eChamber Temperature: Room Temperature\u003cbr\u003ePrinting Speed: up to 300mm\/s\u003cbr\u003eCooling Fan: OFF\u003cbr\u003e\u003cbr\u003eDirect Drive:\u003cbr\u003eRetraction Distance: 3mm\u003cbr\u003eRetraction Speed: 40mm\/s\u003cbr\u003eIndirect Drive:\u003cbr\u003eRetraction Distance: 6mm\u003cbr\u003eRetraction Speed: 60mm\/s\u003cbr\u003e\u003cbr\u003eRecommended Drying Settings:\u003cbr\u003eRegular Oven: 100˚C for 10h\u003cbr\u003ePolyDryer: Level 3 for 18h (\u003ca href=\"\/fr\/collections\/fdm-3d-printer-add-ons\/products\/polymaker-polydryer\" target=\"_blank\"\u003ePolyDryer™\u003c\/a\u003e)\u003cbr\u003e(Only if the material has absorbed moisture)\u003cbr\u003e\u003cbr\u003eAnnealing Settings: 120˚C for 10h\u003c\/p\u003e\n\u003cp\u003eAnnealing Settings For Parts With Large Overhangs or Thin Sections: 100˚C for 14h\u003c\/p\u003e\n\u003cp\u003eMore info and tips on annealing in FAQ tab.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrinter Profiles:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Bambu-Lab_X1C_Bambu-Studio_0.4_Fiberon-PET-CF.zip\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Qidi_Q1Pro_OrcaSlicer_0.4_Fiberon-PET-CF17.zip\" target=\"_blank\"\u003eQIDI Tech\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Raise3D_E2CF_IdeaMaker_0.4_Fiberon-PET-CF17.zip\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCan't find your profile? Join our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/discord.polymaker.com\/\" target=\"_blank\"\u003eDiscord\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003eand see if the community has made one already!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrinting Requirements\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cul\u003e\n\u003cli\u003eAll-metal hotend 270˚C+\u003c\/li\u003e\n\u003cli\u003eHardened nozzle\u003c\/li\u003e\n\u003cli\u003eAnnealing post printing\u003c\/li\u003e\n\u003cli\u003eYou may need a filament dryer depending on the humidity of your environment. Keep dry when not in use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch5\u003eFAQ\u003c\/h5\u003e\n\u003cdiv class=\"product-details__block\"\u003e\n\u003cdiv aria-labelledby=\"tab-2\" role=\"tabpanel\" id=\"panel-2\" tabindex=\"0\"\u003e\n\u003cdiv class=\"rte\"\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is annealing?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou can find out more about annealing\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/us.polymaker.com\/blogs\/3d-printing-tips\/what-is-annealing-and-why-do-we-do-it\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAnnealing at 120°C is deforming my part, what should I do?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf your part has very thin sections - 120°C annealing can cause issue with deformation. In this instance we would give these three potential solutions\u003c\/p\u003e\n\u003cp\u003e1. Gradual heating method. Divide the annealing process into two stages, first keep the temperature at 80-100°C for a period of time, and then slowly heat it to 120°C to avoid rapid heating and internal stress concentration.\u003c\/p\u003e\n\u003cp\u003e2. Anneal at a lower 100°C for a longer period of time. If annealing is performed at 80-100 degrees, the crystallization rate of PET-CF is very slow and the ideal mechanical properties cannot be achieved. 100°C would be the bare minimum to anneal PET-CF at. Our suggestion would be to try 14 hours though we do not have a strict standard for this at this time.\u003c\/p\u003e\n\u003cp\u003e3. Keep support material on thin sections with large overhangs. You can also use other things such as salt or sand to tightly compact around your print to help prevent deformation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill the spools work in an AMS?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes! We have redesigned the edges of our spools so all Polymaker products will now spin great in the AMS.\u003c\/p\u003e\n\u003cp\u003eThat said - you will need to be careful when using any abrasive materials in the AMS.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between PET and PETG?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePET and PETG differ in their chemical structure, properties, printability, and applications. PETG is more flexible, easier to print, and suitable for 3D printing and medical applications, while PET is more durable and suitable for applications requiring thermal resistance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a filament dryer?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is possible to print this without a filament dryer, but that can depend on the environment where you live. If you live in a humid climate - you may need a filament dryer either entire time while printing, or at least between prints. Keep stored dry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan you offer 1KG Fiberon™ Spool Options?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUnfortunately we are not offering 1KG Fiberon™ options and this has to do with the increased chance of carbon fiber and glass fiber filament snapping on the spool.\u003c\/p\u003e\n\u003cp\u003eSince carbon fiber and glass fiber filament is more brittle, we spool these with a larger core. This larger core means that 1KG of filament will not fit on a 1KG spool.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2025-05-07T14:45:01-04:00","created_at":"2025-05-07T14:07:47-04:00","vendor":"Polymaker","type":"Polymaker 1.75mm filaments","tags":["1.75mm","carbon fiber","Fiberon","Filaments","PET-CF"],"price":3499,"price_min":3499,"price_max":3499,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":46422881108204,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PMK-FBR-PET-CF17-500","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Polymaker Fiberon PET-CF17 1.75mm 500g","public_title":null,"options":["Default Title"],"price":3499,"weight":850,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/Polymaker_Fiberon_PET-CF17_1.75mm_500g_Product_Picture.webp?v=1746643621"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Polymaker_Fiberon_PET-CF17_1.75mm_500g_Product_Picture.webp?v=1746643621","options":["Title"],"media":[{"alt":"Polymaker Fiberon PET-CF17 1.75mm 500g Product Picture","id":35332116709612,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Polymaker_Fiberon_PET-CF17_1.75mm_500g_Product_Picture.webp?v=1746643621"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Polymaker_Fiberon_PET-CF17_1.75mm_500g_Product_Picture.webp?v=1746643621","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003eFiberon™ PET-CF17 is a carbon fiber reinforced PET (polyethylene terephthalate) filament. It's the preferred choice for engineering 3D printing composite materials, featuring high modulus, heat resistance, moisture insensitivity, and ease of printing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"product-details__block product-details__text rte\"\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003ch5\u003ePrint settings\u003c\/h5\u003e\n\u003cp\u003ePrinting Temperature: 270˚C - 300˚C\u003cbr\u003eBuild Plate Temperature: 70˚C - 80˚C\u003cbr\u003eChamber Temperature: Room Temperature\u003cbr\u003ePrinting Speed: up to 300mm\/s\u003cbr\u003eCooling Fan: OFF\u003cbr\u003e\u003cbr\u003eDirect Drive:\u003cbr\u003eRetraction Distance: 3mm\u003cbr\u003eRetraction Speed: 40mm\/s\u003cbr\u003eIndirect Drive:\u003cbr\u003eRetraction Distance: 6mm\u003cbr\u003eRetraction Speed: 60mm\/s\u003cbr\u003e\u003cbr\u003eRecommended Drying Settings:\u003cbr\u003eRegular Oven: 100˚C for 10h\u003cbr\u003ePolyDryer: Level 3 for 18h (\u003ca href=\"\/fr\/collections\/fdm-3d-printer-add-ons\/products\/polymaker-polydryer\" target=\"_blank\"\u003ePolyDryer™\u003c\/a\u003e)\u003cbr\u003e(Only if the material has absorbed moisture)\u003cbr\u003e\u003cbr\u003eAnnealing Settings: 120˚C for 10h\u003c\/p\u003e\n\u003cp\u003eAnnealing Settings For Parts With Large Overhangs or Thin Sections: 100˚C for 14h\u003c\/p\u003e\n\u003cp\u003eMore info and tips on annealing in FAQ tab.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrinter Profiles:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Bambu-Lab_X1C_Bambu-Studio_0.4_Fiberon-PET-CF.zip\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Qidi_Q1Pro_OrcaSlicer_0.4_Fiberon-PET-CF17.zip\" target=\"_blank\"\u003eQIDI Tech\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Raise3D_E2CF_IdeaMaker_0.4_Fiberon-PET-CF17.zip\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCan't find your profile? Join our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/discord.polymaker.com\/\" target=\"_blank\"\u003eDiscord\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003eand see if the community has made one already!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrinting Requirements\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cul\u003e\n\u003cli\u003eAll-metal hotend 270˚C+\u003c\/li\u003e\n\u003cli\u003eHardened nozzle\u003c\/li\u003e\n\u003cli\u003eAnnealing post printing\u003c\/li\u003e\n\u003cli\u003eYou may need a filament dryer depending on the humidity of your environment. Keep dry when not in use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch5\u003eFAQ\u003c\/h5\u003e\n\u003cdiv class=\"product-details__block\"\u003e\n\u003cdiv aria-labelledby=\"tab-2\" role=\"tabpanel\" id=\"panel-2\" tabindex=\"0\"\u003e\n\u003cdiv class=\"rte\"\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is annealing?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou can find out more about annealing\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/us.polymaker.com\/blogs\/3d-printing-tips\/what-is-annealing-and-why-do-we-do-it\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAnnealing at 120°C is deforming my part, what should I do?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf your part has very thin sections - 120°C annealing can cause issue with deformation. In this instance we would give these three potential solutions\u003c\/p\u003e\n\u003cp\u003e1. Gradual heating method. Divide the annealing process into two stages, first keep the temperature at 80-100°C for a period of time, and then slowly heat it to 120°C to avoid rapid heating and internal stress concentration.\u003c\/p\u003e\n\u003cp\u003e2. Anneal at a lower 100°C for a longer period of time. If annealing is performed at 80-100 degrees, the crystallization rate of PET-CF is very slow and the ideal mechanical properties cannot be achieved. 100°C would be the bare minimum to anneal PET-CF at. Our suggestion would be to try 14 hours though we do not have a strict standard for this at this time.\u003c\/p\u003e\n\u003cp\u003e3. Keep support material on thin sections with large overhangs. You can also use other things such as salt or sand to tightly compact around your print to help prevent deformation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill the spools work in an AMS?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes! We have redesigned the edges of our spools so all Polymaker products will now spin great in the AMS.\u003c\/p\u003e\n\u003cp\u003eThat said - you will need to be careful when using any abrasive materials in the AMS.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between PET and PETG?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePET and PETG differ in their chemical structure, properties, printability, and applications. PETG is more flexible, easier to print, and suitable for 3D printing and medical applications, while PET is more durable and suitable for applications requiring thermal resistance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a filament dryer?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is possible to print this without a filament dryer, but that can depend on the environment where you live. If you live in a humid climate - you may need a filament dryer either entire time while printing, or at least between prints. Keep stored dry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan you offer 1KG Fiberon™ Spool Options?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUnfortunately we are not offering 1KG Fiberon™ options and this has to do with the increased chance of carbon fiber and glass fiber filament snapping on the spool.\u003c\/p\u003e\n\u003cp\u003eSince carbon fiber and glass fiber filament is more brittle, we spool these with a larger core. This larger core means that 1KG of filament will not fit on a 1KG spool.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Polymaker Fiberon PET-CF17 1.75mm 500g
- St-Hubert Store : En calcul...
- Burnaby Store : En calcul...
$34.99
Fiberon™ PET-CF17 is a carbon fiber reinforced PET (polyethylene terephthalate) filament. It's the preferred choice for engineering 3D printing composite materials, featuring high modulus, heat resistance, moisture insensitivity, and ease of printing. Print settings Printing Temperature: 270˚C - 300˚CBuild Plate Temperature: 70˚C - 80˚CChamber...
{"id":8896062488812,"title":"Polymaker Fiberon PETG-rCF08 1.75mm 500g","handle":"polymaker-fiberon-petg-rcf08-1-75mm-500g","description":"\u003cp\u003e\u003cspan\u003eFiberon™ PETG-rCF08 is a recy\u003c\/span\u003e\u003cspan\u003ecled carbon fiber \u003c\/span\u003e\u003cspan\u003ereinforced PET\u003c\/span\u003e\u003cspan\u003eG filament. It inherits the comp\u003c\/span\u003e\u003cspan\u003er\u003c\/span\u003e\u003cspan\u003eehensi\u003c\/span\u003e\u003cspan\u003eve per\u003c\/span\u003e\u003cspan\u003eformance of P\u003c\/span\u003e\u003cspan\u003eETG, f\u003c\/span\u003e\u003cspan\u003eeaturing \u003c\/span\u003e\u003cspan\u003erecy\u003c\/span\u003e\u003cspan\u003ecled carbon fiber for enhanced su\u003c\/span\u003e\u003cspan\u003er\u003c\/span\u003e\u003cspan\u003eface textu\u003c\/span\u003e\u003cspan\u003ere and \u003c\/span\u003e\u003cspan\u003eimp\u003c\/span\u003e\u003cspan\u003erov\u003c\/span\u003e\u003cspan\u003eed mechanical p\u003c\/span\u003e\u003cspan\u003eroper\u003c\/span\u003e\u003cspan\u003eties.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"product-details__block product-details__text rte\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"product-details__block product-details__text rte\"\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003ch5\u003ePrint settings\u003c\/h5\u003e\n\u003cp\u003ePrinting Temperature: 240˚C - 270˚C\u003cbr\u003eBuild Plate Temperature: 60˚C - 70˚C\u003cbr\u003eChamber Temperature: Room Temperature\u003cbr\u003ePrinting Speed: up to 300mm\/s\u003cbr\u003eCooling Fan: 0%-50%\u003cbr\u003e\u003cbr\u003eDirect Drive:\u003cbr\u003eRetraction Distance: 3mm\u003cbr\u003eRetraction Speed: 40mm\/s\u003cbr\u003eIndirect Drive:\u003cbr\u003eRetraction Distance: 6mm\u003cbr\u003eRetraction Speed: 60mm\/s\u003cbr\u003e\u003cbr\u003eRecommended Drying Settings:\u003cbr\u003eRegular Oven: 65˚C for 3h\u003cbr\u003ePolyDryer: Level 2 for 6h (\u003ca href=\"\/fr\/collections\/fdm-3d-printer-add-ons\/products\/polymaker-polydryer\" target=\"_blank\"\u003ePolyDryer™\u003c\/a\u003e)\u003cbr\u003e(Only if the material has absorbed moisture)\u003cbr\u003e\u003cbr\u003eAnnealing Settings: N\/A\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrinter Profiles:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Bambu-Lab_X1C_Bambu-Studio_0.4_Fiberon-PETG-rCF.zip\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Qidi_Q1Pro_OrcaSlicer_0.4_Fiberon-PETG-rCF08.zip\" target=\"_blank\"\u003eQIDI Tech\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Raise3D_E2CF_IdeaMaker_0.4_Fiberon-PETG-rCF08.zip\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCan't find your profile? Join our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/discord.polymaker.com\/\" target=\"_blank\"\u003eDiscord\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003eand see if the community has made one already!\u003c\/p\u003e\n\u003cdiv class=\"product-details__block product-details__text rte\"\u003e\n\u003cp\u003e\u003cstrong\u003ePrinting Requirements\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cul\u003e\n\u003cli\u003eHardened nozzle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-details__block product-details__text rte\"\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Statement_On_Compliance_With_REACH_1.6_1_de0eeee1-3a63-4fd7-ab3c-236531d22a2e.pdf?v=1731430181\" target=\"_blank\"\u003eREACH\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Statement_On_Compliance_With_RoHS_1.4.pdf?v=1711471841\" target=\"_blank\"\u003eRoHS\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/889_Signed_and_Dated_1.pdf?v=1732549285\" target=\"_blank\"\u003e889\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Profile_Creation_Process_V0.6_1.pdf?v=1731430421\" target=\"_blank\"\u003ePCP\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Polymaker_ISO9001_2024.pdf?v=1731430331\" target=\"_blank\"\u003eISO9001 CERT\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch5\u003eFAQ\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWill the spools work in an AMS?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes! We have redesigned the edges of our spools so all Polymaker products will now spin great in the AMS.\u003c\/p\u003e\n\u003cp\u003eThat said - you will need to be careful when using any abrasive materials in the AMS.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between PET and PETG?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePET and PETG differ in their chemical structure, properties, printability, and applications. PETG is more flexible, easier to print, and suitable for 3D printing and medical applications, while PET is more durable and suitable for applications requiring thermal resistance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan you offer 1KG Fiberon™ Spool Options?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUnfortunately we are not offering 1KG Fiberon™ options and this has to do with the increased chance of carbon fiber and glass fiber filament snapping on the spool.\u003c\/p\u003e\n\u003cp\u003eSince carbon fiber and glass fiber filament is more brittle, we spool these with a larger core. This larger core means that 1KG of filament will not fit on a 1KG spool.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2025-05-07T14:02:21-04:00","created_at":"2025-05-07T13:46:08-04:00","vendor":"Polymaker","type":"Polymaker 1.75mm filaments","tags":["1.75mm","carbon fiber","Fiberon","Filaments","petg"],"price":2799,"price_min":2799,"price_max":2799,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":46422856859884,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PMK-FBR-PEG-CF08-500","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Polymaker Fiberon PETG-rCF08 1.75mm 500g","public_title":null,"options":["Default Title"],"price":2799,"weight":850,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6938936714606","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/Polymaker_Fiberon_PETG-rCF08_1.75mm_500g_Product_Picture.webp?v=1746643644"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Polymaker_Fiberon_PETG-rCF08_1.75mm_500g_Product_Picture.webp?v=1746643644","options":["Title"],"media":[{"alt":"Polymaker Fiberon PETG-rCF08 1.75mm 500g Product Picture","id":35332032561388,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Polymaker_Fiberon_PETG-rCF08_1.75mm_500g_Product_Picture.webp?v=1746643644"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Polymaker_Fiberon_PETG-rCF08_1.75mm_500g_Product_Picture.webp?v=1746643644","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003eFiberon™ PETG-rCF08 is a recy\u003c\/span\u003e\u003cspan\u003ecled carbon fiber \u003c\/span\u003e\u003cspan\u003ereinforced PET\u003c\/span\u003e\u003cspan\u003eG filament. It inherits the comp\u003c\/span\u003e\u003cspan\u003er\u003c\/span\u003e\u003cspan\u003eehensi\u003c\/span\u003e\u003cspan\u003eve per\u003c\/span\u003e\u003cspan\u003eformance of P\u003c\/span\u003e\u003cspan\u003eETG, f\u003c\/span\u003e\u003cspan\u003eeaturing \u003c\/span\u003e\u003cspan\u003erecy\u003c\/span\u003e\u003cspan\u003ecled carbon fiber for enhanced su\u003c\/span\u003e\u003cspan\u003er\u003c\/span\u003e\u003cspan\u003eface textu\u003c\/span\u003e\u003cspan\u003ere and \u003c\/span\u003e\u003cspan\u003eimp\u003c\/span\u003e\u003cspan\u003erov\u003c\/span\u003e\u003cspan\u003eed mechanical p\u003c\/span\u003e\u003cspan\u003eroper\u003c\/span\u003e\u003cspan\u003eties.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"product-details__block product-details__text rte\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"product-details__block product-details__text rte\"\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003ch5\u003ePrint settings\u003c\/h5\u003e\n\u003cp\u003ePrinting Temperature: 240˚C - 270˚C\u003cbr\u003eBuild Plate Temperature: 60˚C - 70˚C\u003cbr\u003eChamber Temperature: Room Temperature\u003cbr\u003ePrinting Speed: up to 300mm\/s\u003cbr\u003eCooling Fan: 0%-50%\u003cbr\u003e\u003cbr\u003eDirect Drive:\u003cbr\u003eRetraction Distance: 3mm\u003cbr\u003eRetraction Speed: 40mm\/s\u003cbr\u003eIndirect Drive:\u003cbr\u003eRetraction Distance: 6mm\u003cbr\u003eRetraction Speed: 60mm\/s\u003cbr\u003e\u003cbr\u003eRecommended Drying Settings:\u003cbr\u003eRegular Oven: 65˚C for 3h\u003cbr\u003ePolyDryer: Level 2 for 6h (\u003ca href=\"\/fr\/collections\/fdm-3d-printer-add-ons\/products\/polymaker-polydryer\" target=\"_blank\"\u003ePolyDryer™\u003c\/a\u003e)\u003cbr\u003e(Only if the material has absorbed moisture)\u003cbr\u003e\u003cbr\u003eAnnealing Settings: N\/A\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrinter Profiles:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Bambu-Lab_X1C_Bambu-Studio_0.4_Fiberon-PETG-rCF.zip\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Qidi_Q1Pro_OrcaSlicer_0.4_Fiberon-PETG-rCF08.zip\" target=\"_blank\"\u003eQIDI Tech\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Raise3D_E2CF_IdeaMaker_0.4_Fiberon-PETG-rCF08.zip\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCan't find your profile? Join our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/discord.polymaker.com\/\" target=\"_blank\"\u003eDiscord\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003eand see if the community has made one already!\u003c\/p\u003e\n\u003cdiv class=\"product-details__block product-details__text rte\"\u003e\n\u003cp\u003e\u003cstrong\u003ePrinting Requirements\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cul\u003e\n\u003cli\u003eHardened nozzle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-details__block product-details__text rte\"\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Statement_On_Compliance_With_REACH_1.6_1_de0eeee1-3a63-4fd7-ab3c-236531d22a2e.pdf?v=1731430181\" target=\"_blank\"\u003eREACH\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Statement_On_Compliance_With_RoHS_1.4.pdf?v=1711471841\" target=\"_blank\"\u003eRoHS\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/889_Signed_and_Dated_1.pdf?v=1732549285\" target=\"_blank\"\u003e889\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Profile_Creation_Process_V0.6_1.pdf?v=1731430421\" target=\"_blank\"\u003ePCP\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Polymaker_ISO9001_2024.pdf?v=1731430331\" target=\"_blank\"\u003eISO9001 CERT\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch5\u003eFAQ\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWill the spools work in an AMS?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes! We have redesigned the edges of our spools so all Polymaker products will now spin great in the AMS.\u003c\/p\u003e\n\u003cp\u003eThat said - you will need to be careful when using any abrasive materials in the AMS.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between PET and PETG?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePET and PETG differ in their chemical structure, properties, printability, and applications. PETG is more flexible, easier to print, and suitable for 3D printing and medical applications, while PET is more durable and suitable for applications requiring thermal resistance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan you offer 1KG Fiberon™ Spool Options?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUnfortunately we are not offering 1KG Fiberon™ options and this has to do with the increased chance of carbon fiber and glass fiber filament snapping on the spool.\u003c\/p\u003e\n\u003cp\u003eSince carbon fiber and glass fiber filament is more brittle, we spool these with a larger core. This larger core means that 1KG of filament will not fit on a 1KG spool.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Polymaker Fiberon PETG-rCF08 1.75mm 500g
- St-Hubert Store : En calcul...
- Burnaby Store : En calcul...
$27.99
Fiberon™ PETG-rCF08 is a recycled carbon fiber reinforced PETG filament. It inherits the comprehensive performance of PETG, featuring recycled carbon fiber for enhanced surface texture and improved mechanical properties. Print settings Printing Temperature: 240˚C - 270˚CBuild Plate Temperature: 60˚C - 70˚CChamber Temperature: Room Temperature...
{"id":8896053281004,"title":"Polymaker Fiberon PETG-ESD 1.75mm 500g","handle":"polymaker-fiberon-petg-esd-1-75mm-500g","description":"\u003cp\u003e\u003cspan\u003eFiberon™ PETG-ESD offers electrostatic discharge (ESD) safety with improved toughness making it a good candidate for applications in electronics industry. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNOTE: \u003clabel for=\"so-tab-3\"\u003eFiberon\u003c\/label\u003e™ PETG-ESD is compounded with carbon nano-tubes:\u003cbr\u003e\u003ca rel=\"noopener\" href=\"https:\/\/cfpub.epa.gov\/si\/si_public_record_report.cfm?dirEntryId=344783\u0026amp;Lab=NRMRL\u0026amp;subject=Health%20Research\u0026amp;showCriteria=0\u0026amp;searchAll=Waste%20Management%20or%20Materials%20Management\u0026amp;sortBy=revisionDate\" target=\"_blank\"\u003eHere\u003c\/a\u003e is a research regarding ABS compounded with carbon nano-tubes.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"product-details__block product-details__text rte\"\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003ch5\u003ePrint settings\u003c\/h5\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ePrinting Temperature: 250˚C - 290˚C\u003cbr\u003eBed Temperature: 70˚C - 80˚C\u003cbr\u003ePrinting Speed: up to 500mm.s\u003cbr\u003eFan: OFF\u003cbr\u003e\u003cbr\u003eDirect Drive:\u003cbr\u003eRetraction Distance: 1mm\u003cbr\u003eRetraction Speed: 20mm\/s\u003cbr\u003eIndirect Drive:\u003cbr\u003eRetraction Distance: 3mm\u003cbr\u003eRetraction Speed: 40mm\/s\u003cbr\u003e\u003cbr\u003eDrying Settings: 65˚C for 3h\u003cbr\u003ePolyDryer™: Level 3 for 6h (\u003ca href=\"\/fr\/collections\/fdm-3d-printer-add-ons\/products\/polymaker-polydryer\" target=\"_blank\"\u003ePolyDryer™\u003c\/a\u003e)\u003cbr\u003e(Only if the material has absorbed moisture)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrinter Profiles:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Bambu-Lab_X1C_Bambu-Studio_0.4_Fiberon-PETG-ESD.zip\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Qidi_Q1Pro_OrcaSlicer_0.4_Fiberon-PETG-ESD.zip\" target=\"_blank\"\u003eQIDI Tech\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Raise-3D_E2CF_ideaMaker_0.4_Fiberon-PETG-ESD.zip\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCan't find your profile? Join our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/discord.polymaker.com\/\" target=\"_blank\"\u003eDiscord\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003eand see if the community has made one already!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrinting Requirements\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"product-details__block product-details__text rte\"\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cul\u003e\n\u003cli\u003eAll-metal hotend 250˚C+ recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-details__block product-details__text rte\"\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Statement_On_Compliance_With_REACH_1.6_1_de0eeee1-3a63-4fd7-ab3c-236531d22a2e.pdf?v=1731430181\" target=\"_blank\"\u003eREACH\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Statement_On_Compliance_With_RoHS_1.4.pdf?v=1711471841\" target=\"_blank\"\u003eRoHS\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/889_Signed_and_Dated_1.pdf?v=1732549285\" target=\"_blank\"\u003e889\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Profile_Creation_Process_V0.6_1.pdf?v=1731430421\" target=\"_blank\"\u003ePCP\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Polymaker_ISO9001_2024.pdf?v=1731430331\" target=\"_blank\"\u003eISO9001 CERT\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch5\u003eFAQ\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow long will PETG-ESD remain ESD safe?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ESD (Electrostatic Discharge) safety of PETG-ESD filament can degrade over time, depending on environmental factors like humidity, temperature, and exposure to dust or contaminants. PETG-ESD filaments contain conductive additives, which can wear off or lose effectiveness due to surface abrasion or environmental wear. Typically, the ESD-safe properties should remain intact for 1-2 years under controlled conditions, but regular testing is recommended to ensure continued ESD performance. Storing parts in a clean, dry environment can help maintain their ESD properties longer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo you have any further data?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou can find some Surface Resistivity test results\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/PETG-ESD_test_report.pdf?v=1743012101\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill the spools work in an AMS?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes! We have redesigned the edges of our spools so all Polymaker products will now spin great in the AMS.\u003c\/p\u003e\n\u003cp\u003eThat said - you will need to be careful when using any abrasive materials in the AMS.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between PET and PETG?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePET and PETG differ in their chemical structure, properties, printability, and applications. PETG is more flexible, easier to print, and suitable for 3D printing and medical applications, while PET is more durable and suitable for applications requiring thermal resistance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2025-05-07T13:43:07-04:00","created_at":"2025-05-07T12:59:50-04:00","vendor":"Polymaker","type":"Polymaker 1.75mm filaments","tags":["1.75mm","ESD safe","Fiberon","Filaments","petg","PolyLite"],"price":4699,"price_min":4699,"price_max":4699,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":46422817931500,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PMK-FBR-PEG-ESD-500","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Polymaker Fiberon PETG-ESD 1.75mm 500g","public_title":null,"options":["Default Title"],"price":4699,"weight":850,"compare_at_price":null,"inventory_quantity":15,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6938936714651","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/Polymaker_Fiberon_PETG-ESD_1.75mm_500g_Product_Picture.webp?v=1746643668"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Polymaker_Fiberon_PETG-ESD_1.75mm_500g_Product_Picture.webp?v=1746643668","options":["Title"],"media":[{"alt":"Polymaker Fiberon PETG-ESD 1.75mm 500g Product Picture","id":35331928064236,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Polymaker_Fiberon_PETG-ESD_1.75mm_500g_Product_Picture.webp?v=1746643668"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Polymaker_Fiberon_PETG-ESD_1.75mm_500g_Product_Picture.webp?v=1746643668","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003eFiberon™ PETG-ESD offers electrostatic discharge (ESD) safety with improved toughness making it a good candidate for applications in electronics industry. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNOTE: \u003clabel for=\"so-tab-3\"\u003eFiberon\u003c\/label\u003e™ PETG-ESD is compounded with carbon nano-tubes:\u003cbr\u003e\u003ca rel=\"noopener\" href=\"https:\/\/cfpub.epa.gov\/si\/si_public_record_report.cfm?dirEntryId=344783\u0026amp;Lab=NRMRL\u0026amp;subject=Health%20Research\u0026amp;showCriteria=0\u0026amp;searchAll=Waste%20Management%20or%20Materials%20Management\u0026amp;sortBy=revisionDate\" target=\"_blank\"\u003eHere\u003c\/a\u003e is a research regarding ABS compounded with carbon nano-tubes.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"product-details__block product-details__text rte\"\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003ch5\u003ePrint settings\u003c\/h5\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ePrinting Temperature: 250˚C - 290˚C\u003cbr\u003eBed Temperature: 70˚C - 80˚C\u003cbr\u003ePrinting Speed: up to 500mm.s\u003cbr\u003eFan: OFF\u003cbr\u003e\u003cbr\u003eDirect Drive:\u003cbr\u003eRetraction Distance: 1mm\u003cbr\u003eRetraction Speed: 20mm\/s\u003cbr\u003eIndirect Drive:\u003cbr\u003eRetraction Distance: 3mm\u003cbr\u003eRetraction Speed: 40mm\/s\u003cbr\u003e\u003cbr\u003eDrying Settings: 65˚C for 3h\u003cbr\u003ePolyDryer™: Level 3 for 6h (\u003ca href=\"\/fr\/collections\/fdm-3d-printer-add-ons\/products\/polymaker-polydryer\" target=\"_blank\"\u003ePolyDryer™\u003c\/a\u003e)\u003cbr\u003e(Only if the material has absorbed moisture)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrinter Profiles:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Bambu-Lab_X1C_Bambu-Studio_0.4_Fiberon-PETG-ESD.zip\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Qidi_Q1Pro_OrcaSlicer_0.4_Fiberon-PETG-ESD.zip\" target=\"_blank\"\u003eQIDI Tech\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Raise-3D_E2CF_ideaMaker_0.4_Fiberon-PETG-ESD.zip\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCan't find your profile? Join our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/discord.polymaker.com\/\" target=\"_blank\"\u003eDiscord\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003eand see if the community has made one already!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrinting Requirements\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"product-details__block product-details__text rte\"\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cul\u003e\n\u003cli\u003eAll-metal hotend 250˚C+ recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-details__block product-details__text rte\"\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Statement_On_Compliance_With_REACH_1.6_1_de0eeee1-3a63-4fd7-ab3c-236531d22a2e.pdf?v=1731430181\" target=\"_blank\"\u003eREACH\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Statement_On_Compliance_With_RoHS_1.4.pdf?v=1711471841\" target=\"_blank\"\u003eRoHS\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/889_Signed_and_Dated_1.pdf?v=1732549285\" target=\"_blank\"\u003e889\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Profile_Creation_Process_V0.6_1.pdf?v=1731430421\" target=\"_blank\"\u003ePCP\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Polymaker_ISO9001_2024.pdf?v=1731430331\" target=\"_blank\"\u003eISO9001 CERT\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch5\u003eFAQ\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow long will PETG-ESD remain ESD safe?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ESD (Electrostatic Discharge) safety of PETG-ESD filament can degrade over time, depending on environmental factors like humidity, temperature, and exposure to dust or contaminants. PETG-ESD filaments contain conductive additives, which can wear off or lose effectiveness due to surface abrasion or environmental wear. Typically, the ESD-safe properties should remain intact for 1-2 years under controlled conditions, but regular testing is recommended to ensure continued ESD performance. Storing parts in a clean, dry environment can help maintain their ESD properties longer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo you have any further data?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou can find some Surface Resistivity test results\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/PETG-ESD_test_report.pdf?v=1743012101\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill the spools work in an AMS?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes! We have redesigned the edges of our spools so all Polymaker products will now spin great in the AMS.\u003c\/p\u003e\n\u003cp\u003eThat said - you will need to be careful when using any abrasive materials in the AMS.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between PET and PETG?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePET and PETG differ in their chemical structure, properties, printability, and applications. PETG is more flexible, easier to print, and suitable for 3D printing and medical applications, while PET is more durable and suitable for applications requiring thermal resistance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Polymaker Fiberon PETG-ESD 1.75mm 500g
- St-Hubert Store : En calcul...
- Burnaby Store : En calcul...
$46.99
Fiberon™ PETG-ESD offers electrostatic discharge (ESD) safety with improved toughness making it a good candidate for applications in electronics industry. NOTE: Fiberon™ PETG-ESD is compounded with carbon nano-tubes:Here is a research regarding ABS compounded with carbon nano-tubes. Print settings Printing Temperature: 250˚C - 290˚CBed Tem...
{"id":8896046760172,"title":"Polymaker Fiberon PA12-CF10 1.75mm 500g","handle":"polymaker-fiberon-pa12-cf10-1-75mm-500g","description":"\u003cp\u003e\u003cspan\u003eFiberon™ PA12-CF10 is carbon fiber reinforced long chain copolyamide filament. Thanks to its chemical structure, this product has lower moisture sensitivity compared to PA6\/66 and PA6-based materials, and better mechanical properties than PA12-based materials. In addition, the carbon fiber reinforcement and Warp-freeTM technology enhance the size stability of the prints produced with this material.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFiberon™ PA12-CF10 is the same great formula as PolyMide PA12-CF, although Fiberon™ PA12-CF10 may print in a slightly darker black shade color than its predecessor.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"product-details__block product-details__text rte\"\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003ch5\u003ePrint settings\u003c\/h5\u003e\n\u003cp\u003ePrinting Temperature: 280˚C - 300˚C\u003cbr\u003eBuild Plate Temperature: 40˚C - 50˚C\u003cbr\u003eChamber Temperature: Room Temperature\u003cbr\u003ePrinting Speed: up to 300mm\/s\u003cbr\u003eCooling Fan: OFF\u003c\/p\u003e\n\u003cp\u003eDirect Drive:\u003cbr\u003eRetraction Distance: 3mm\u003cbr\u003eRetraction Speed: 40mm\/s\u003cbr\u003eIndirect Drive:\u003cbr\u003eRetraction Distance: 6mm\u003cbr\u003eRetraction Speed: 60mm\/s\u003cbr\u003e\u003cbr\u003eRecommended Drying Settings:\u003cbr\u003eRegular Oven: 100˚C for 10h\u003cbr\u003ePolyDryer: Level 3 for 18h (\u003ca href=\"\/fr\/collections\/fdm-3d-printer-add-ons\/products\/polymaker-polydryer\" target=\"_blank\"\u003ePolyDryer™\u003c\/a\u003e)\u003cbr\u003e(Only if the material has absorbed moisture)\u003cbr\u003e\u003cbr\u003eAnnealing Settings: 100˚C for 16h\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrinter Profiles:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Bambu-Lab_X1C_Bambu-Studio_0.4_Fiberon-PA12-CF.zip\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Qidi_Q1Pro_OrcaSlicer_0.4_Fiberon-PA12-CF10.zip\" target=\"_blank\"\u003eQIDI Tech\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Raise-3D_E2CF_ideaMaker_0.4_Fiberon-PA12-CF10.zip\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCan't find your profile? Join our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/discord.polymaker.com\/\" target=\"_blank\"\u003eDiscord\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003eand see if the community has made one already!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrinting Requirements\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"product-details__block product-details__text rte\"\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cul\u003e\n\u003cli\u003eAll-metal hotend 280˚C+\u003c\/li\u003e\n\u003cli\u003eHardened nozzle\u003c\/li\u003e\n\u003cli\u003eFilament dryer\u003c\/li\u003e\n\u003cli\u003eAnnealing post printing\u003c\/li\u003e\n\u003cli\u003eMoisture conditioning after Annealing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-details__block product-details__text rte\"\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Statement_On_Compliance_With_REACH_1.6_1_de0eeee1-3a63-4fd7-ab3c-236531d22a2e.pdf?v=1731430181\" target=\"_blank\"\u003eREACH\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Statement_On_Compliance_With_RoHS_1.4.pdf?v=1711471841\" target=\"_blank\"\u003eRoHS\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/889_Signed_and_Dated_1.pdf?v=1732549285\" target=\"_blank\"\u003e889\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Profile_Creation_Process_V0.6_1.pdf?v=1731430421\" target=\"_blank\"\u003ePCP\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Polymaker_ISO9001_2024.pdf?v=1731430331\" target=\"_blank\"\u003eISO9001 CERT\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch5\u003eFAQ\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is annealing?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou can find out more about annealing\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/us.polymaker.com\/blogs\/3d-printing-tips\/what-is-annealing-and-why-do-we-do-it\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is moisture conditioning?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMoisture conditioning refers to allowing the print to absorb moisture. This is inevitble since nylons are hygroscopic, but you can expedite the process by keeping the print in a high humidity climate, or submerging them in water, for 48 hours. All of our test specimens were annealed at 100˚C for 16 hours, and then immerged in water at 60˚C for 48 hours. The average moisture content of specimens is 2.57%.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I anneal before or after moisture conditioning?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen you anneal in a convection oven, you will dry the part out. So if you moisture condition before annealing - you will need to moisture condition again after. So we would suggest to moisture condition after annealing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy do you use such a low build plate temperature with your nylons?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur nylons come with our Warp-Free™ Technology. In order for this Warp-Free™ technology to work as it should - we want to make sure the build plate and the ambient air temperatures are both below 50˚C. We then anneal the print after to get it's full strength.\u003c\/p\u003e\n\u003cp\u003eLearn more\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/us.polymaker.com\/blogs\/finding-the-right-filament\/polymakers-technologies\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill the spools work in an AMS?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes! We have redesigned the edges of our spools so all Polymaker products will now spin great in the AMS.\u003c\/p\u003e\n\u003cp\u003eThat said - you will need to be careful when using any abrasive materials in the AMS.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan you offer 1KG Fiberon™ Spool Options?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUnfortunately we are not offering 1KG Fiberon™ options and this has to do with the increased chance of carbon fiber and glass fiber filament snapping on the spool.\u003c\/p\u003e\n\u003cp\u003eSince carbon fiber and glass fiber filament is more brittle, we spool these with a larger core. This larger core means that 1KG of filament will not fit on a 1KG spool.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2025-05-07T12:54:29-04:00","created_at":"2025-05-07T12:36:36-04:00","vendor":"Polymaker","type":"Polymaker 1.75mm filaments","tags":["1.75mm","carbon fiber","Fiberon","Filaments","nylon","Pa12"],"price":9899,"price_min":9899,"price_max":9899,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":46422763438316,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PMK-FBR-PA12-CF10-500","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Polymaker Fiberon PA12-CF10 1.75mm 500g","public_title":null,"options":["Default Title"],"price":9899,"weight":850,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6938936714637","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/Polymaker_Fiberon_PA12-10_1.75mm_500g_Product_Picture.webp?v=1746643702"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Polymaker_Fiberon_PA12-10_1.75mm_500g_Product_Picture.webp?v=1746643702","options":["Title"],"media":[{"alt":"Polymaker Fiberon PA12 CF10 1.75mm 500g Product Picture","id":35331734470892,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Polymaker_Fiberon_PA12-10_1.75mm_500g_Product_Picture.webp?v=1746643702"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Polymaker_Fiberon_PA12-10_1.75mm_500g_Product_Picture.webp?v=1746643702","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003eFiberon™ PA12-CF10 is carbon fiber reinforced long chain copolyamide filament. Thanks to its chemical structure, this product has lower moisture sensitivity compared to PA6\/66 and PA6-based materials, and better mechanical properties than PA12-based materials. In addition, the carbon fiber reinforcement and Warp-freeTM technology enhance the size stability of the prints produced with this material.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFiberon™ PA12-CF10 is the same great formula as PolyMide PA12-CF, although Fiberon™ PA12-CF10 may print in a slightly darker black shade color than its predecessor.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"product-details__block product-details__text rte\"\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003ch5\u003ePrint settings\u003c\/h5\u003e\n\u003cp\u003ePrinting Temperature: 280˚C - 300˚C\u003cbr\u003eBuild Plate Temperature: 40˚C - 50˚C\u003cbr\u003eChamber Temperature: Room Temperature\u003cbr\u003ePrinting Speed: up to 300mm\/s\u003cbr\u003eCooling Fan: OFF\u003c\/p\u003e\n\u003cp\u003eDirect Drive:\u003cbr\u003eRetraction Distance: 3mm\u003cbr\u003eRetraction Speed: 40mm\/s\u003cbr\u003eIndirect Drive:\u003cbr\u003eRetraction Distance: 6mm\u003cbr\u003eRetraction Speed: 60mm\/s\u003cbr\u003e\u003cbr\u003eRecommended Drying Settings:\u003cbr\u003eRegular Oven: 100˚C for 10h\u003cbr\u003ePolyDryer: Level 3 for 18h (\u003ca href=\"\/fr\/collections\/fdm-3d-printer-add-ons\/products\/polymaker-polydryer\" target=\"_blank\"\u003ePolyDryer™\u003c\/a\u003e)\u003cbr\u003e(Only if the material has absorbed moisture)\u003cbr\u003e\u003cbr\u003eAnnealing Settings: 100˚C for 16h\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrinter Profiles:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Bambu-Lab_X1C_Bambu-Studio_0.4_Fiberon-PA12-CF.zip\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Qidi_Q1Pro_OrcaSlicer_0.4_Fiberon-PA12-CF10.zip\" target=\"_blank\"\u003eQIDI Tech\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Raise-3D_E2CF_ideaMaker_0.4_Fiberon-PA12-CF10.zip\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCan't find your profile? Join our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/discord.polymaker.com\/\" target=\"_blank\"\u003eDiscord\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003eand see if the community has made one already!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrinting Requirements\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"product-details__block product-details__text rte\"\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cul\u003e\n\u003cli\u003eAll-metal hotend 280˚C+\u003c\/li\u003e\n\u003cli\u003eHardened nozzle\u003c\/li\u003e\n\u003cli\u003eFilament dryer\u003c\/li\u003e\n\u003cli\u003eAnnealing post printing\u003c\/li\u003e\n\u003cli\u003eMoisture conditioning after Annealing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-details__block product-details__text rte\"\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Statement_On_Compliance_With_REACH_1.6_1_de0eeee1-3a63-4fd7-ab3c-236531d22a2e.pdf?v=1731430181\" target=\"_blank\"\u003eREACH\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Statement_On_Compliance_With_RoHS_1.4.pdf?v=1711471841\" target=\"_blank\"\u003eRoHS\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/889_Signed_and_Dated_1.pdf?v=1732549285\" target=\"_blank\"\u003e889\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Profile_Creation_Process_V0.6_1.pdf?v=1731430421\" target=\"_blank\"\u003ePCP\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Polymaker_ISO9001_2024.pdf?v=1731430331\" target=\"_blank\"\u003eISO9001 CERT\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch5\u003eFAQ\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is annealing?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou can find out more about annealing\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/us.polymaker.com\/blogs\/3d-printing-tips\/what-is-annealing-and-why-do-we-do-it\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is moisture conditioning?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMoisture conditioning refers to allowing the print to absorb moisture. This is inevitble since nylons are hygroscopic, but you can expedite the process by keeping the print in a high humidity climate, or submerging them in water, for 48 hours. All of our test specimens were annealed at 100˚C for 16 hours, and then immerged in water at 60˚C for 48 hours. The average moisture content of specimens is 2.57%.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I anneal before or after moisture conditioning?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen you anneal in a convection oven, you will dry the part out. So if you moisture condition before annealing - you will need to moisture condition again after. So we would suggest to moisture condition after annealing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy do you use such a low build plate temperature with your nylons?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur nylons come with our Warp-Free™ Technology. In order for this Warp-Free™ technology to work as it should - we want to make sure the build plate and the ambient air temperatures are both below 50˚C. We then anneal the print after to get it's full strength.\u003c\/p\u003e\n\u003cp\u003eLearn more\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/us.polymaker.com\/blogs\/finding-the-right-filament\/polymakers-technologies\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill the spools work in an AMS?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes! We have redesigned the edges of our spools so all Polymaker products will now spin great in the AMS.\u003c\/p\u003e\n\u003cp\u003eThat said - you will need to be careful when using any abrasive materials in the AMS.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan you offer 1KG Fiberon™ Spool Options?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUnfortunately we are not offering 1KG Fiberon™ options and this has to do with the increased chance of carbon fiber and glass fiber filament snapping on the spool.\u003c\/p\u003e\n\u003cp\u003eSince carbon fiber and glass fiber filament is more brittle, we spool these with a larger core. This larger core means that 1KG of filament will not fit on a 1KG spool.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Polymaker Fiberon PA12-CF10 1.75mm 500g
- St-Hubert Store : En calcul...
- Burnaby Store : En calcul...
$98.99
Fiberon™ PA12-CF10 is carbon fiber reinforced long chain copolyamide filament. Thanks to its chemical structure, this product has lower moisture sensitivity compared to PA6/66 and PA6-based materials, and better mechanical properties than PA12-based materials. In addition, the carbon fiber reinforcement and Warp-freeTM technology enhance the siz...
{"id":8896042533100,"title":"Polymaker Fiberon PA6-GF25 1.75mm 500g","handle":"polymaker-fiberon-pa6-gf25-1-75mm-500g","description":"\u003cp\u003e\u003cspan\u003eFiberon™ PA6-GF25 is a glass fiber reinforced PA6 (Nylon 6) filament. The material exhibits excellent thermal and mechanical properties without sacrificing the layer adhesion.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFormerly called PolyMide PA6-GF.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"product-details__block product-details__text rte\"\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003ch5\u003ePrint settings\u003c\/h5\u003e\n\u003cp\u003emperature: 280˚C - 300˚C\u003cbr\u003eBuild Plate Temperature: 40˚C - 50˚C\u003cbr\u003eChamber Temperature: Room Temperature\u003cbr\u003ePrinting Speed: up to 300mm\/s\u003cbr\u003eCooling Fan: OFF\u003cbr\u003e\u003cbr\u003eDirect Drive:\u003cbr\u003eRetraction Distance: 3mm\u003cbr\u003eRetraction Speed: 40mm\/s\u003cbr\u003eIndirect Drive:\u003cbr\u003eRetraction Distance: 6mm\u003cbr\u003eRetraction Speed: 60mm\/s\u003cbr\u003e\u003cbr\u003eRecommended Drying Settings:\u003cbr\u003eRegular Oven: 100˚C for 10h\u003cbr\u003ePolyDryer: Level 3 for 18h (\u003ca href=\"\/fr\/collections\/fdm-3d-printer-add-ons\/products\/polymaker-polydryer\" target=\"_blank\"\u003ePolyDryer™\u003c\/a\u003e)\u003cbr\u003e(Only if the material has absorbed moisture)\u003cbr\u003e\u003cbr\u003eAnnealing Settings: 100˚C for 16h\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrinter Profiles:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Bambu-Lab_X1C_Bambu-Studio_0.4_Fiberon-PA6-GF.zip\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Qidi_Q1Pro_OrcaSlicer_0.4_Fiberon-PA6-GF25.zip\" target=\"_blank\"\u003eQIDI Tech\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Raise-3D_E2CF_ideaMaker_0.4_Fiberon-PA6-GF25.zip\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCan't find your profile? Join our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/discord.polymaker.com\/\" target=\"_blank\"\u003eDiscord\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003eand see if the community has made one already!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrinting Requirements\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"product-details__block product-details__text rte\"\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cul\u003e\n\u003cli\u003eAll-metal hotend 280˚C+\u003c\/li\u003e\n\u003cli\u003eHardened nozzle\u003c\/li\u003e\n\u003cli\u003eFilament dryer\u003c\/li\u003e\n\u003cli\u003eAnnealing post printing\u003c\/li\u003e\n\u003cli\u003eMoisture conditioning after Annealing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-details__block product-details__text rte\"\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Statement_On_Compliance_With_REACH_1.6_1_de0eeee1-3a63-4fd7-ab3c-236531d22a2e.pdf?v=1731430181\" target=\"_blank\"\u003eREACH\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Statement_On_Compliance_With_RoHS_1.4.pdf?v=1711471841\" target=\"_blank\"\u003eRoHS\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/889_Signed_and_Dated_1.pdf?v=1732549285\" target=\"_blank\"\u003e889\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Profile_Creation_Process_V0.6_1.pdf?v=1731430421\" target=\"_blank\"\u003ePCP\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Polymaker_ISO9001_2024.pdf?v=1731430331\" target=\"_blank\"\u003eISO9001 CERT\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch5\u003eFAQ\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is annealing?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou can find out more about annealing\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/us.polymaker.com\/blogs\/3d-printing-tips\/what-is-annealing-and-why-do-we-do-it\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is moisture conditioning?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMoisture conditioning refers to allowing the print to absorb moisture. This is inevitble since nylons are hygroscopic, but you can expedite the process by keeping the print in a high humidity climate, or submerging them in water, for 48 hours. All of our test specimens were annealed at 100˚C for 16 hours, and then immerged in water at 60˚C for 48 hours. The average moisture content of specimens is 2.57%.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I anneal before or after moisture conditioning?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen you anneal in a convection oven, you will dry the part out. So if you moisture condition before annealing - you will need to moisture condition again after. So we would suggest to moisture condition after annealing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy do you use such a low build plate temperature with your nylons?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur nylons come with our Warp-Free™ Technology. In order for this Warp-Free™ technology to work as it should - we want to make sure the build plate and the ambient air temperatures are both below 50˚C. We then anneal the print after to get it's full strength.\u003c\/p\u003e\n\u003cp\u003eLearn more\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/us.polymaker.com\/blogs\/finding-the-right-filament\/polymakers-technologies\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill the spools work in an AMS?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes! We have redesigned the edges of our spools so all Polymaker products will now spin great in the AMS.\u003c\/p\u003e\n\u003cp\u003eThat said - you will need to be careful when using any abrasive materials in the AMS.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan you offer 1KG Fiberon™ Spool Options?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUnfortunately we are not offering 1KG Fiberon™ options and this has to do with the increased chance of carbon fiber and glass fiber filament snapping on the spool.\u003c\/p\u003e\n\u003cp\u003eSince carbon fiber and glass fiber filament is more brittle, we spool these with a larger core. This larger core means that 1KG of filament will not fit on a 1KG spool.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2025-05-07T12:34:49-04:00","created_at":"2025-05-07T12:15:05-04:00","vendor":"Polymaker","type":"Polymaker 1.75mm filaments","tags":["1.75mm","Fiberon","Filaments","glass fiber","nylon","PA6"],"price":4199,"price_min":4199,"price_max":4199,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":46422665724140,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PMK-FBR-PA6-GF25-500","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Polymaker Fiberon PA6-GF25 1.75mm 500g","public_title":null,"options":["Default Title"],"price":4199,"weight":850,"compare_at_price":null,"inventory_quantity":12,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6938936714620","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/Polymaker_Fiberon_PA6-GF25_1.75mm_500g_Product_Picture.webp?v=1746643726"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Polymaker_Fiberon_PA6-GF25_1.75mm_500g_Product_Picture.webp?v=1746643726","options":["Title"],"media":[{"alt":"Polymaker Fiberon PA6-GF25 1.75mm 500g Product Picture","id":35331637477612,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Polymaker_Fiberon_PA6-GF25_1.75mm_500g_Product_Picture.webp?v=1746643726"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Polymaker_Fiberon_PA6-GF25_1.75mm_500g_Product_Picture.webp?v=1746643726","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003eFiberon™ PA6-GF25 is a glass fiber reinforced PA6 (Nylon 6) filament. The material exhibits excellent thermal and mechanical properties without sacrificing the layer adhesion.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFormerly called PolyMide PA6-GF.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"product-details__block product-details__text rte\"\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003ch5\u003ePrint settings\u003c\/h5\u003e\n\u003cp\u003emperature: 280˚C - 300˚C\u003cbr\u003eBuild Plate Temperature: 40˚C - 50˚C\u003cbr\u003eChamber Temperature: Room Temperature\u003cbr\u003ePrinting Speed: up to 300mm\/s\u003cbr\u003eCooling Fan: OFF\u003cbr\u003e\u003cbr\u003eDirect Drive:\u003cbr\u003eRetraction Distance: 3mm\u003cbr\u003eRetraction Speed: 40mm\/s\u003cbr\u003eIndirect Drive:\u003cbr\u003eRetraction Distance: 6mm\u003cbr\u003eRetraction Speed: 60mm\/s\u003cbr\u003e\u003cbr\u003eRecommended Drying Settings:\u003cbr\u003eRegular Oven: 100˚C for 10h\u003cbr\u003ePolyDryer: Level 3 for 18h (\u003ca href=\"\/fr\/collections\/fdm-3d-printer-add-ons\/products\/polymaker-polydryer\" target=\"_blank\"\u003ePolyDryer™\u003c\/a\u003e)\u003cbr\u003e(Only if the material has absorbed moisture)\u003cbr\u003e\u003cbr\u003eAnnealing Settings: 100˚C for 16h\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrinter Profiles:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Bambu-Lab_X1C_Bambu-Studio_0.4_Fiberon-PA6-GF.zip\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Qidi_Q1Pro_OrcaSlicer_0.4_Fiberon-PA6-GF25.zip\" target=\"_blank\"\u003eQIDI Tech\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Raise-3D_E2CF_ideaMaker_0.4_Fiberon-PA6-GF25.zip\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCan't find your profile? Join our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/discord.polymaker.com\/\" target=\"_blank\"\u003eDiscord\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003eand see if the community has made one already!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrinting Requirements\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"product-details__block product-details__text rte\"\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cul\u003e\n\u003cli\u003eAll-metal hotend 280˚C+\u003c\/li\u003e\n\u003cli\u003eHardened nozzle\u003c\/li\u003e\n\u003cli\u003eFilament dryer\u003c\/li\u003e\n\u003cli\u003eAnnealing post printing\u003c\/li\u003e\n\u003cli\u003eMoisture conditioning after Annealing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-details__block product-details__text rte\"\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Statement_On_Compliance_With_REACH_1.6_1_de0eeee1-3a63-4fd7-ab3c-236531d22a2e.pdf?v=1731430181\" target=\"_blank\"\u003eREACH\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Statement_On_Compliance_With_RoHS_1.4.pdf?v=1711471841\" target=\"_blank\"\u003eRoHS\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/889_Signed_and_Dated_1.pdf?v=1732549285\" target=\"_blank\"\u003e889\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Profile_Creation_Process_V0.6_1.pdf?v=1731430421\" target=\"_blank\"\u003ePCP\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Polymaker_ISO9001_2024.pdf?v=1731430331\" target=\"_blank\"\u003eISO9001 CERT\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch5\u003eFAQ\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is annealing?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou can find out more about annealing\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/us.polymaker.com\/blogs\/3d-printing-tips\/what-is-annealing-and-why-do-we-do-it\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is moisture conditioning?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMoisture conditioning refers to allowing the print to absorb moisture. This is inevitble since nylons are hygroscopic, but you can expedite the process by keeping the print in a high humidity climate, or submerging them in water, for 48 hours. All of our test specimens were annealed at 100˚C for 16 hours, and then immerged in water at 60˚C for 48 hours. The average moisture content of specimens is 2.57%.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I anneal before or after moisture conditioning?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen you anneal in a convection oven, you will dry the part out. So if you moisture condition before annealing - you will need to moisture condition again after. So we would suggest to moisture condition after annealing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy do you use such a low build plate temperature with your nylons?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur nylons come with our Warp-Free™ Technology. In order for this Warp-Free™ technology to work as it should - we want to make sure the build plate and the ambient air temperatures are both below 50˚C. We then anneal the print after to get it's full strength.\u003c\/p\u003e\n\u003cp\u003eLearn more\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/us.polymaker.com\/blogs\/finding-the-right-filament\/polymakers-technologies\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill the spools work in an AMS?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes! We have redesigned the edges of our spools so all Polymaker products will now spin great in the AMS.\u003c\/p\u003e\n\u003cp\u003eThat said - you will need to be careful when using any abrasive materials in the AMS.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan you offer 1KG Fiberon™ Spool Options?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUnfortunately we are not offering 1KG Fiberon™ options and this has to do with the increased chance of carbon fiber and glass fiber filament snapping on the spool.\u003c\/p\u003e\n\u003cp\u003eSince carbon fiber and glass fiber filament is more brittle, we spool these with a larger core. This larger core means that 1KG of filament will not fit on a 1KG spool.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Polymaker Fiberon PA6-GF25 1.75mm 500g
- St-Hubert Store : En calcul...
- Burnaby Store : En calcul...
$41.99
Fiberon™ PA6-GF25 is a glass fiber reinforced PA6 (Nylon 6) filament. The material exhibits excellent thermal and mechanical properties without sacrificing the layer adhesion. Formerly called PolyMide PA6-GF. Print settings mperature: 280˚C - 300˚CBuild Plate Temperature: 40˚C - 50˚CChamber Temperature: Room TemperaturePrinting Speed: up to 30...
