Ultimaker Factor 4 Dual Extruder 3D printer

{"id":7867983429868,"title":"Ultimaker S7 Dual Extruder 3D Printer","handle":"ultimaker-s7-dual-extruder-3d-printer-1","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eBundle pricing available when you buy the S7 and Material Handling Station. Email us at service@voxelfactory.com for a quote. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe latest offering in 3D printing from UltiMaker, featuring dual extruders, swappable extrusion cores, an high resolution integrated camera for print monitoring, Wifi and USB printing, and built in Air Manager and much more! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe integrated Air Manager filters out up to 95% of UFPs while also keeping the build\u003cbr data-mce-fragment=\"1\"\u003echamber temperature carefully regulated. The single door helps with heat loss by reducing the gaps. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ePrint head with inductive sensor: A new inductive sensor for bed leveling more\u003cbr data-mce-fragment=\"1\"\u003eaccurately probes the build plate. And automatic tilt compensation removes the need for\u003cbr data-mce-fragment=\"1\"\u003ethumbscrew bed calibration.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAdvanced active leveling: Reliable first-layer adhesion enables unattended use without manual leveling. Run-out and fan bracket sensors will pause your print and notify you if you run out of filament or if there is a clog that causes your print head to flood.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eFlexible build plate: The PEI-coated build plate makes for reliable print adhesion and removal. A sensor also assures your build plate will always be in place before printing. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e1080p camera: Checking on your print remotely via UltiMaker Digital Factory never\u003cbr data-mce-fragment=\"1\"\u003elooked better. The new 1080p camera in the UltiMaker S7 is mounted higher to give a\u003cbr data-mce-fragment=\"1\"\u003ebetter view of the first layers.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eWi-Fi 2.4 and 5 GHz: The UltiMaker S7 adds 5 GHz Wi-Fi compatibility, which cuts through\u003cbr data-mce-fragment=\"1\"\u003einterference to improve network stability, resulting in a more reliable wireless signal.\u003cbr data-mce-fragment=\"1\"\u003eThis is especially useful for companies that only allow connections via the 5 GHz band.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe Ultimaker S7 allows you to print with a wide range of materials, including Nylon, Tough PLA, ABS, CPE and PVA. With its dual extruder system, you can print soluble support as you go, giving you more freedom to create the shapes you want.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ePrint file compatibility: The UltiMaker S7 was created with compatibility in mind. This\u003cbr data-mce-fragment=\"1\"\u003emeans that, if you own an UltiMaker S5, your entire digital library of S5 print files will\u003cbr data-mce-fragment=\"1\"\u003ework flawlessly on the S7 – with no re-slicing needed.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAll new purchases of Ultimaker printers come with \u003ca href=\"https:\/\/ultimaker.com\/software\/ultimaker-essentials?utm_campaign=2021_Alwayson_srengineer_traffic_do_CA\u0026amp;utm_source=google\u0026amp;utm_medium=cpc\u0026amp;gclid=CjwKCAjw7--KBhAMEiwAxfpkWCfWmW8G3KtAbD3qNI3GZq6EZjy73myPZcE_fv71_U5JNUSS3xVVsRoCa1EQAvD_BwE\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/ultimaker.com\/software\/ultimaker-essentials?utm_campaign=2021_Alwayson_srengineer_traffic_do_CA\u0026amp;utm_source=google\u0026amp;utm_medium=cpc\u0026amp;gclid=CjwKCAjw7--KBhAMEiwAxfpkWCfWmW8G3KtAbD3qNI3GZq6EZjy73myPZcE_fv71_U5JNUSS3xVVsRoCa1EQAvD_BwE\"\u003eUltimaker Essentials\u003c\/a\u003e A new cloud-based ecosystem for sharing and storing Cura Project files and remote printing from anywhere. Access to security-assessed software – with remote printing, user management, and e-learning.\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/ultimaker.com\/3d-printers\/ultimaker-s5\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/ultimaker.com\/3d-printers\/ultimaker-s5\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eManufacturers Website\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3 hours of free training at Voxel Factory\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003eSpecs\u003c\/h5\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eDimensions \u0026amp; Weight\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eExternal dimensions: 495 x 585 x 780 mm (19.5 x 23 x 30.7 in)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWeight: 29.1 kg (64.2 lbs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003ePrinting\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTechnology : Fused Filament Fabrication (FFF)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBuild dimensions : 330 x 240 x 300 mm \u003cspan data-mce-fragment=\"1\"\u003e(12.9 x 9.4 x 11.8 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBuild volume : 23760 cm³ (571 in³)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBuild volume (dual extrusion) : 8471 cm³ (1431 in³)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLayer height : Starting at 20 microns\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFilament diameter : 2.85mm\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eExtruder : Dual\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHotend : Swappable Print Cores\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e(AA 0.25 mm, 0.4 mm or 0.8 mm),                        \u003c\/span\u003e(BB 0.4 mm or 0.8 mm) and (CC 0,4 and 0.6 mm)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eNozzle diameter : 0.4 mm (standard)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMaximum nozzle temperature : 280°C\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHeatbed : PEI coated flexible build plate (20 - 140 °C)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBed-leveling : Inductive sensor-enabled bed leveling\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEnclosure : Single front door\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eInterface \u0026amp; Connectivity : LCD touchscreen, USB, Wi-Fi (2.4GHz + 5GHz),\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAxis Motors : Step motors\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePower rating : 500 W\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLive high resolution camera (view from desktop or app)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMaterial recognition : Auto-recognition with NFC scanner\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDisplay : 4.7-inch colour touchscreen\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003eSoftware\u003c\/h5\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eSlicing\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003ca title=\"Cura\" href=\"https:\/\/ultimaker.com\/en\/products\/cura-software\" data-mce-fragment=\"1\" target=\"_blank\" data-mce-href=\"https:\/\/ultimaker.com\/en\/products\/cura-software\"\u003eCura\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eControl\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003ca title=\"Link to Download page for Cura Connect by Ultimaker\" href=\"https:\/\/ultimaker.com\/en\/products\/ultimaker-cura-software\/cura-connect\" data-mce-fragment=\"1\" target=\"_blank\" data-mce-href=\"https:\/\/ultimaker.com\/en\/products\/ultimaker-cura-software\/cura-connect\"\u003eCura Connect\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eSupported OS\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMacOS, Windows and Linux\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePlugin integration : SolidWorks, Siemens NX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eFile types\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUltimaker Cura: STL, OBJ, X3D, 3MF, BMP, GIF, JPG, PNG\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePrintable formats: G, GCODE, GCODE.gz, UPF\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePresliced files for S5 do not need reslicing \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003eMaterials\u003c\/h5\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOptimized for: PLA, Tough PLA, PETG, Nylon, ABS, CPE, CPE+, PC,\u003cbr data-mce-fragment=\"1\"\u003eTPU 95A, PP, PVA, Breakaway\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAlso supports third-party materials\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2023-01-24T11:08:34-05:00","created_at":"2023-01-24T10:35:11-05:00","vendor":"Ultimaker","type":"Ultimaker 3D printers","tags":["2.85mm","Dual Extruder","Ultimaker 3D Printer","Ultimaker S7"],"price":1120300,"price_min":1120300,"price_max":1120300,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43629603717356,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UMK-3DP-US7-000-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Ultimaker S7 Dual Extruder 3D Printer","public_title":null,"options":["Default Title"],"price":1120300,"weight":35000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/products\/Ultimaker_S7_Dual_Extruder_3D_Printer.webp?v=1674576202"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/Ultimaker_S7_Dual_Extruder_3D_Printer.webp?v=1674576202","options":["Title"],"media":[{"alt":null,"id":31234003239148,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/Ultimaker_S7_Dual_Extruder_3D_Printer.webp?v=1674576202"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/Ultimaker_S7_Dual_Extruder_3D_Printer.webp?v=1674576202","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eBundle pricing available when you buy the S7 and Material Handling Station. Email us at service@voxelfactory.com for a quote. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe latest offering in 3D printing from UltiMaker, featuring dual extruders, swappable extrusion cores, an high resolution integrated camera for print monitoring, Wifi and USB printing, and built in Air Manager and much more! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe integrated Air Manager filters out up to 95% of UFPs while also keeping the build\u003cbr data-mce-fragment=\"1\"\u003echamber temperature carefully regulated. The single door helps with heat loss by reducing the gaps. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ePrint head with inductive sensor: A new inductive sensor for bed leveling more\u003cbr data-mce-fragment=\"1\"\u003eaccurately probes the build plate. And automatic tilt compensation removes the need for\u003cbr data-mce-fragment=\"1\"\u003ethumbscrew bed calibration.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAdvanced active leveling: Reliable first-layer adhesion enables unattended use without manual leveling. Run-out and fan bracket sensors will pause your print and notify you if you run out of filament or if there is a clog that causes your print head to flood.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eFlexible build plate: The PEI-coated build plate makes for reliable print adhesion and removal. A sensor also assures your build plate will always be in place before printing. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e1080p camera: Checking on your print remotely via UltiMaker Digital Factory never\u003cbr data-mce-fragment=\"1\"\u003elooked better. The new 1080p camera in the UltiMaker S7 is mounted higher to give a\u003cbr data-mce-fragment=\"1\"\u003ebetter view of the first layers.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eWi-Fi 2.4 and 5 GHz: The UltiMaker S7 adds 5 GHz Wi-Fi compatibility, which cuts through\u003cbr data-mce-fragment=\"1\"\u003einterference to improve network stability, resulting in a more reliable wireless signal.\u003cbr data-mce-fragment=\"1\"\u003eThis is especially useful for companies that only allow connections via the 5 GHz band.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe Ultimaker S7 allows you to print with a wide range of materials, including Nylon, Tough PLA, ABS, CPE and PVA. With its dual extruder system, you can print soluble support as you go, giving you more freedom to create the shapes you want.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ePrint file compatibility: The UltiMaker S7 was created with compatibility in mind. This\u003cbr data-mce-fragment=\"1\"\u003emeans that, if you own an UltiMaker S5, your entire digital library of S5 print files will\u003cbr data-mce-fragment=\"1\"\u003ework flawlessly on the S7 – with no re-slicing needed.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAll new purchases of Ultimaker printers come with \u003ca href=\"https:\/\/ultimaker.com\/software\/ultimaker-essentials?utm_campaign=2021_Alwayson_srengineer_traffic_do_CA\u0026amp;utm_source=google\u0026amp;utm_medium=cpc\u0026amp;gclid=CjwKCAjw7--KBhAMEiwAxfpkWCfWmW8G3KtAbD3qNI3GZq6EZjy73myPZcE_fv71_U5JNUSS3xVVsRoCa1EQAvD_BwE\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/ultimaker.com\/software\/ultimaker-essentials?utm_campaign=2021_Alwayson_srengineer_traffic_do_CA\u0026amp;utm_source=google\u0026amp;utm_medium=cpc\u0026amp;gclid=CjwKCAjw7--KBhAMEiwAxfpkWCfWmW8G3KtAbD3qNI3GZq6EZjy73myPZcE_fv71_U5JNUSS3xVVsRoCa1EQAvD_BwE\"\u003eUltimaker Essentials\u003c\/a\u003e A new cloud-based ecosystem for sharing and storing Cura Project files and remote printing from anywhere. Access to security-assessed software – with remote printing, user management, and e-learning.\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/ultimaker.com\/3d-printers\/ultimaker-s5\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/ultimaker.com\/3d-printers\/ultimaker-s5\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eManufacturers Website\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3 hours of free training at Voxel Factory\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003eSpecs\u003c\/h5\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eDimensions \u0026amp; Weight\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eExternal dimensions: 495 x 585 x 780 mm (19.5 x 23 x 30.7 in)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWeight: 29.1 kg (64.2 lbs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003ePrinting\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTechnology : Fused Filament Fabrication (FFF)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBuild dimensions : 330 x 240 x 300 mm \u003cspan data-mce-fragment=\"1\"\u003e(12.9 x 9.4 x 11.8 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBuild volume : 23760 cm³ (571 in³)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBuild volume (dual extrusion) : 8471 cm³ (1431 in³)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLayer height : Starting at 20 microns\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFilament diameter : 2.85mm\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eExtruder : Dual\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHotend : Swappable Print Cores\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e(AA 0.25 mm, 0.4 mm or 0.8 mm),                        \u003c\/span\u003e(BB 0.4 mm or 0.8 mm) and (CC 0,4 and 0.6 mm)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eNozzle diameter : 0.4 mm (standard)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMaximum nozzle temperature : 280°C\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHeatbed : PEI coated flexible build plate (20 - 140 °C)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBed-leveling : Inductive sensor-enabled bed leveling\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEnclosure : Single front door\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eInterface \u0026amp; Connectivity : LCD touchscreen, USB, Wi-Fi (2.4GHz + 5GHz),\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAxis Motors : Step motors\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePower rating : 500 W\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLive high resolution camera (view from desktop or app)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMaterial recognition : Auto-recognition with NFC scanner\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDisplay : 4.7-inch colour touchscreen\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003eSoftware\u003c\/h5\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eSlicing\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003ca title=\"Cura\" href=\"https:\/\/ultimaker.com\/en\/products\/cura-software\" data-mce-fragment=\"1\" target=\"_blank\" data-mce-href=\"https:\/\/ultimaker.com\/en\/products\/cura-software\"\u003eCura\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eControl\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003ca title=\"Link to Download page for Cura Connect by Ultimaker\" href=\"https:\/\/ultimaker.com\/en\/products\/ultimaker-cura-software\/cura-connect\" data-mce-fragment=\"1\" target=\"_blank\" data-mce-href=\"https:\/\/ultimaker.com\/en\/products\/ultimaker-cura-software\/cura-connect\"\u003eCura Connect\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eSupported OS\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMacOS, Windows and Linux\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePlugin integration : SolidWorks, Siemens NX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eFile types\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUltimaker Cura: STL, OBJ, X3D, 3MF, BMP, GIF, JPG, PNG\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePrintable formats: G, GCODE, GCODE.gz, UPF\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePresliced files for S5 do not need reslicing \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003eMaterials\u003c\/h5\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOptimized for: PLA, Tough PLA, PETG, Nylon, ABS, CPE, CPE+, PC,\u003cbr data-mce-fragment=\"1\"\u003eTPU 95A, PP, PVA, Breakaway\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAlso supports third-party materials\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e"}

{"id":6910479204532,"title":"Ultimaker S5 Dual Extruder 3D Printer PRO Bundle","handle":"ultimaker-s5-dual-extruder-3d-printer-pro-bundle","description":"\u003cdiv style=\"text-align: left;\" data-mce-style=\"text-align: left;\"\u003e \u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\u003ca title=\"Send an email to ask for a quote\" style=\"background-color: #2baadf; border: none; color: white; padding: 15px 15px; text-align: center; text-decoration: none; display: inline-block; font-size: 16px; margin: 4px 2px; cursor: pointer; border-radius: 8px; box-shadow: 0px 5px 8px -9px rgba(0,0,0,0.24),0 9px 20px -1px rgba(0,0,0,0.19); -webkit-transition-duration: 0.4s; \/* safari *\/ transition-duration: 0.4s;\" href=\"mailto:service@voxelfactory.com?subject=Quote%20for%20Ultimaker%20S5\u0026amp;body=Hi%2C%0A%0AI%20would%20like%20a%20quote%20for%20an%20Ultimaker%20S5.%0A%0A%5BPlease%20insert%20any%20other%20product%20you%20wish%20to%20have%20in%20the%20quote%2C%20like%20materials%20(NEW%20TOUGH%20PLA)%20and%20add-ons%5D%0A%0A%5BInsert%20your%20contact%20information%20for%20a%20faster%20quote%5D\" target=\"_blank\" data-mce-style=\"background-color: #2baadf; border: none; color: white; padding: 15px 15px; text-align: center; text-decoration: none; display: inline-block; font-size: 16px; margin: 4px 2px; cursor: pointer; border-radius: 8px; box-shadow: 0px 5px 8px -9px rgba(0,0,0,0.24),0 9px 20px -1px rgba(0,0,0,0.19); -webkit-transition-duration: 0.4s; \/* safari *\/ transition-duration: 0.4s;\"\u003eAsk For Quote\u003c\/a\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe Ultimaker S5 Pro Bundle includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/voxelfactory.com\/products\/ultimaker-s5-dual-extruder-3d-printer?_pos=8\u0026amp;_sid=84293f853\u0026amp;_ss=r\"\u003eUltimaker S5 Dual Extruder 3D Printer\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/voxelfactory.com\/products\/ultimaker-air-manager-for-ultimaker-s5?_pos=3\u0026amp;_sid=aace9c3f7\u0026amp;_ss=r\" data-mce-href=\"https:\/\/voxelfactory.com\/products\/ultimaker-air-manager-for-ultimaker-s5?_pos=3\u0026amp;_sid=aace9c3f7\u0026amp;_ss=r\"\u003eUltimaker S5 Air Manager \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/voxelfactory.com\/products\/material-handling-station-for-ultimaker-s5?_pos=1\u0026amp;_sid=177c514c8\u0026amp;_ss=r\" data-mce-href=\"https:\/\/voxelfactory.com\/products\/material-handling-station-for-ultimaker-s5?_pos=1\u0026amp;_sid=177c514c8\u0026amp;_ss=r\"\u003eUltimaker Material Handling Station\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/voxelfactory.com\/products\/3dlac-plus-adhesive-solution?_pos=1\u0026amp;_sid=095177b47\u0026amp;_ss=r\"\u003e3Dlac adhesive spray\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline; color: #ff0000;\" data-mce-style=\"text-decoration: underline; color: #ff0000;\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003eThe top-of-the-line 3D printer from Ultimaker, featuring dual extruders, swappable extrusion cores, an integrated camera for print monitoring, Wifi and USB printing, and much more! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWith the PRO Bundle, you have automatic material handling, efficient air filtering, and filament humidity control.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eActive bed leveling ensures a perfect first layer, a closed front controls\u003cbr\u003eairflow, and a filament flow sensor will pause your print and notify you if\u003cbr\u003eyou run out of material. Trust the S5 to do its job while you do yours.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003eThe Ultimaker S5 allows you to print with a wide range of materials, including Nylon, Tough PLA, ABS, CPE, and PVA. With its dual extruder system, you can print soluble support as you go, giving you more freedom to create the shapes you want.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003eAll new purchases of Ultimaker printers come with \u003ca href=\"https:\/\/ultimaker.com\/software\/ultimaker-essentials?utm_campaign=2021_Alwayson_srengineer_traffic_do_CA\u0026amp;utm_source=google\u0026amp;utm_medium=cpc\u0026amp;gclid=CjwKCAjw7--KBhAMEiwAxfpkWCfWmW8G3KtAbD3qNI3GZq6EZjy73myPZcE_fv71_U5JNUSS3xVVsRoCa1EQAvD_BwE\"\u003eUltimaker Essentials\u003c\/a\u003e A new cloud-based ecosystem for sharing and storing Cura Project files and remote printing from anywhere.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/ultimaker.com\/3d-printers\/ultimaker-s5\"\u003e\u003cspan\u003e\u003cspan\u003eManufacturers Website\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cstrong\u003e3 hours of free training at Voxel Factory.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003ch3\u003eUltimaker S5 3D Printer\u003c\/h3\u003e\n\u003ch3\u003eDimensions \u0026amp; Weight\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExternal dimensions: 342 x 505 x 588 mm \u003cspan\u003e(13.5 x 19.9 x 23.1 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 10.6 kg (23.3 lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePro Bundle Assembled dimensions: 495 x 500 x 1197 mm (19.5 x 19.5 x 47.1 inches)  \u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003ePro Bundle Weight: 59.0 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrinting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eTechnology: Fused Filament Fabrication (FFF)\u003c\/li\u003e\n\u003cli\u003eBuild dimensions : 330 x 240 x 300 mm \u003cspan\u003e(12.9 x 9.4 x 11.8 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuild volume : 23760 cm³ (571 in³)\u003c\/li\u003e\n\u003cli\u003eBuild volume (dual extrusion) : 8471 cm³ (1431 in³)\u003c\/li\u003e\n\u003cli\u003eLayer height: Starting at 20 microns\u003c\/li\u003e\n\u003cli\u003eFilament diameter: 2.85mm\u003c\/li\u003e\n\u003cli\u003eExtruder: Dual\u003c\/li\u003e\n\u003cli\u003eHotend : Swappable Print Cores \u003cspan\u003e(AA 0.25 mm, 0.4 mm or 0.8 mm),                        \u003c\/span\u003e(BB 0.4 mm or 0.8 mm) and (CC 0.4, and 0.6 mm)\u003c\/li\u003e\n\u003cli\u003eNozzle diameter: 0.4 mm (standard)\u003c\/li\u003e\n\u003cli\u003eMaximum nozzle temperature: 280°C\u003c\/li\u003e\n\u003cli\u003eHeatbed: Heated glass plate (up to 140\u003cspan\u003e°C)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eBed-leveling: Active bed leveling\u003c\/li\u003e\n\u003cli\u003eEnclosure: Front door\u003c\/li\u003e\n\u003cli\u003eInterface \u0026amp; Connectivity : LCD touchscreen, USB, Wifi\u003c\/li\u003e\n\u003cli\u003eAxis Motors: Step motors\u003c\/li\u003e\n\u003cli\u003ePower rating: 500 W\u003c\/li\u003e\n\u003cli\u003eLive camera (view from desktop or app)\u003c\/li\u003e\n\u003cli\u003eMaterial recognition: Auto-recognition with NFC scanner\u003c\/li\u003e\n\u003cli\u003eDisplay: 4.7-inch color touchscreen\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMaterial Handling Station\u003c\/h3\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003ePhysical Dimensions : 491 x 438 x 400 mm (19.3 x 17.2 x 15.7 in)\u003c\/li\u003e\n\u003cli\u003eNet weight: 17.7kg\u003c\/li\u003e\n\u003cli\u003eFilament diameter: 2.85mm\u003c\/li\u003e\n\u003cli\u003eMaterial spool dimensions :\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 50 - 70 mm (2 - 2.7 in)\u003c\/li\u003e\n\u003cli\u003eDiameter: 197 - 203 mm (7.8 - 8 in)\u003c\/li\u003e\n\u003cli\u003eCore diameter: \u0026gt; 98 mm (3.8 in)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eMaterial capacity: 6 spools\u003c\/li\u003e\n\u003cli\u003eMaterial recognition: auto-recognition with NFC scanner\u003c\/li\u003e\n\u003cli\u003eFeeder type: dual-geared, abrasion-resistant\u003c\/li\u003e\n\u003cli\u003eData connection : UMB (included)\u003c\/li\u003e\n\u003cli\u003ePower input : 85 - 264 VAC, max 125W\u003c\/li\u003e\n\u003cli\u003ePower output: max 10A (for Ultimaker S5)\u003c\/li\u003e\n\u003cli\u003eCompatible 3D printer:\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"Ultimaker S5 3D printer\" href=\"https:\/\/www.voxelfactory.com\/products\/ultimaker-s5-dual-extruder-3d-printer\" target=\"_blank\"\u003eUltimaker S5\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eSoftware integration: Ultimaker Cura, Ultimaker Connect, Ultimaker Cloud\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAir Manager\u003c\/h3\u003e\n\u003cp\u003ePhysical Dimensions : 490 x 503 x 350 mm (19.3 x 19.8 x 13.8 in)\u003c\/p\u003e\n\u003cp\u003eDimensions (including S5 printer) : 490 x 503 x 967 mm (19.3 x 19.8 x 38 in)\u003c\/p\u003e\n\u003cp\u003eNet weight: 3.6kg\u003c\/p\u003e\n\u003cp\u003eFilter technology: EPA E10 filter\u003c\/p\u003e\n\u003cp\u003eFan technology: low-noise brushless fan\u003c\/p\u003e\n\u003cp\u003eAir refresh rate: 1 - 50 m³\/h (35 m³\/h nominal rate for most materials at 23°C)\u003c\/p\u003e\n\u003cp\u003eFilter replacement is recommended every 1500 print hours (approx. 1 year)\u003c\/p\u003e\n\u003cp\u003eOperating sound: less than 51 dBA (including Ultimaker S5)\u003c\/p\u003e\n\u003cp\u003eCompatible printer: Ultimaker S5\u003c\/p\u003e\n\u003cp\u003eData \/ power connection: UMB connection (included)\u003c\/p\u003e\n\u003cp\u003eCompatible materials: Optimized for Ultimaker materials, 3rd party materials also supported.\u003c\/p\u003e\n\u003ch5\u003eSoftware\u003c\/h5\u003e\n\u003ch3\u003eSlicing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca title=\"Cura\" href=\"https:\/\/ultimaker.com\/en\/products\/cura-software\" target=\"_blank\"\u003eCura\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eControl\u003c\/h3\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca title=\"Repetier-Host\" href=\"https:\/\/www.repetier.com\/\"\u003eRepetier-Host\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"Link to Download page for Cura Connect by Ultimaker\" href=\"https:\/\/ultimaker.com\/en\/products\/ultimaker-cura-software\/cura-connect\" target=\"_blank\"\u003eCura Connect\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSupported OS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eMacOS, Windows and Linux\u003c\/li\u003e\n\u003cli\u003ePlugin integration : SolidWorks, Siemens NX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFile types\u003c\/h3\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eUltimaker Cura: STL, OBJ, X3D, 3MF, BMP, GIF, JPG, PNG\u003c\/li\u003e\n\u003cli\u003ePrintable formats: G, GCODE, GCODE.gz, UPF\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMaterials\u003c\/h5\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eOptimized for: PLA, Tough PLA, Nylon, ABS, CPE, CPE+, PC,\u003cbr\u003eTPU 95A, PP, PVA, Breakaway\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAlso supports third-party materials\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","published_at":"2021-10-06T13:49:10-04:00","created_at":"2021-10-05T17:03:39-04:00","vendor":"Ultimaker","type":"Ultimaker 3D printers","tags":["3Dprinters","Ultimaker","ultimaker s5"],"price":1458000,"price_min":1458000,"price_max":1458000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40769743061172,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UMK-3DP-US5-PRO-BUN","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ultimaker S5 Dual Extruder 3D Printer PRO Bundle","public_title":null,"options":["Default Title"],"price":1458000,"weight":29000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/products\/Ultimaker-S5-Pro-Bundle-3_1400x_86556b44-324a-470d-98fb-48ddc1edfe88.jpg?v=1642542666","\/\/www.voxelfactory.com\/cdn\/shop\/products\/Ultimaker-S5-View1_1400x_6d5c605f-6fe7-4b60-ace2-9a74cc790673.jpg?v=1642542735","\/\/www.voxelfactory.com\/cdn\/shop\/products\/Ultimaker-S5-Pro-Bundle-7_1400x_3874c7b1-e6be-42ec-881c-58d4529b1e0c.jpg?v=1642542735","\/\/www.voxelfactory.com\/cdn\/shop\/products\/Ultimaker-S5-Pro-Bundle-10_1400x_3f0ade3f-07b5-4912-93bf-c0bbadec8b86.jpg?v=1642542735","\/\/www.voxelfactory.com\/cdn\/shop\/products\/Ultimaker-S5-Pro-Bundle-6_1400x_f55204e9-952b-4d6e-acb2-7402ee5d30c3.jpg?v=1642542735"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/Ultimaker-S5-Pro-Bundle-3_1400x_86556b44-324a-470d-98fb-48ddc1edfe88.jpg?v=1642542666","options":["Title"],"media":[{"alt":null,"id":29047538483436,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/Ultimaker-S5-Pro-Bundle-3_1400x_86556b44-324a-470d-98fb-48ddc1edfe88.jpg?v=1642542666"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/Ultimaker-S5-Pro-Bundle-3_1400x_86556b44-324a-470d-98fb-48ddc1edfe88.jpg?v=1642542666","width":1400},{"alt":null,"id":29047541072108,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/Ultimaker-S5-View1_1400x_6d5c605f-6fe7-4b60-ace2-9a74cc790673.jpg?v=1642542735"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/Ultimaker-S5-View1_1400x_6d5c605f-6fe7-4b60-ace2-9a74cc790673.jpg?v=1642542735","width":1400},{"alt":null,"id":29047539368172,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/Ultimaker-S5-Pro-Bundle-7_1400x_3874c7b1-e6be-42ec-881c-58d4529b1e0c.jpg?v=1642542735"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/Ultimaker-S5-Pro-Bundle-7_1400x_3874c7b1-e6be-42ec-881c-58d4529b1e0c.jpg?v=1642542735","width":1400},{"alt":null,"id":29047539630316,"position":4,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/Ultimaker-S5-Pro-Bundle-10_1400x_3f0ade3f-07b5-4912-93bf-c0bbadec8b86.jpg?v=1642542735"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/Ultimaker-S5-Pro-Bundle-10_1400x_3f0ade3f-07b5-4912-93bf-c0bbadec8b86.jpg?v=1642542735","width":1400},{"alt":null,"id":29047538745580,"position":5,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/Ultimaker-S5-Pro-Bundle-6_1400x_f55204e9-952b-4d6e-acb2-7402ee5d30c3.jpg?v=1642542735"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/Ultimaker-S5-Pro-Bundle-6_1400x_f55204e9-952b-4d6e-acb2-7402ee5d30c3.jpg?v=1642542735","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv style=\"text-align: left;\" data-mce-style=\"text-align: left;\"\u003e \u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\u003ca title=\"Send an email to ask for a quote\" style=\"background-color: #2baadf; border: none; color: white; padding: 15px 15px; text-align: center; text-decoration: none; display: inline-block; font-size: 16px; margin: 4px 2px; cursor: pointer; border-radius: 8px; box-shadow: 0px 5px 8px -9px rgba(0,0,0,0.24),0 9px 20px -1px rgba(0,0,0,0.19); -webkit-transition-duration: 0.4s; \/* safari *\/ transition-duration: 0.4s;\" href=\"mailto:service@voxelfactory.com?subject=Quote%20for%20Ultimaker%20S5\u0026amp;body=Hi%2C%0A%0AI%20would%20like%20a%20quote%20for%20an%20Ultimaker%20S5.%0A%0A%5BPlease%20insert%20any%20other%20product%20you%20wish%20to%20have%20in%20the%20quote%2C%20like%20materials%20(NEW%20TOUGH%20PLA)%20and%20add-ons%5D%0A%0A%5BInsert%20your%20contact%20information%20for%20a%20faster%20quote%5D\" target=\"_blank\" data-mce-style=\"background-color: #2baadf; border: none; color: white; padding: 15px 15px; text-align: center; text-decoration: none; display: inline-block; font-size: 16px; margin: 4px 2px; cursor: pointer; border-radius: 8px; box-shadow: 0px 5px 8px -9px rgba(0,0,0,0.24),0 9px 20px -1px rgba(0,0,0,0.19); -webkit-transition-duration: 0.4s; \/* safari *\/ transition-duration: 0.4s;\"\u003eAsk For Quote\u003c\/a\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe Ultimaker S5 Pro Bundle includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/voxelfactory.com\/products\/ultimaker-s5-dual-extruder-3d-printer?_pos=8\u0026amp;_sid=84293f853\u0026amp;_ss=r\"\u003eUltimaker S5 Dual Extruder 3D Printer\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/voxelfactory.com\/products\/ultimaker-air-manager-for-ultimaker-s5?_pos=3\u0026amp;_sid=aace9c3f7\u0026amp;_ss=r\" data-mce-href=\"https:\/\/voxelfactory.com\/products\/ultimaker-air-manager-for-ultimaker-s5?_pos=3\u0026amp;_sid=aace9c3f7\u0026amp;_ss=r\"\u003eUltimaker S5 Air Manager \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/voxelfactory.com\/products\/material-handling-station-for-ultimaker-s5?_pos=1\u0026amp;_sid=177c514c8\u0026amp;_ss=r\" data-mce-href=\"https:\/\/voxelfactory.com\/products\/material-handling-station-for-ultimaker-s5?_pos=1\u0026amp;_sid=177c514c8\u0026amp;_ss=r\"\u003eUltimaker Material Handling Station\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/voxelfactory.com\/products\/3dlac-plus-adhesive-solution?_pos=1\u0026amp;_sid=095177b47\u0026amp;_ss=r\"\u003e3Dlac adhesive spray\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline; color: #ff0000;\" data-mce-style=\"text-decoration: underline; color: #ff0000;\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003eThe top-of-the-line 3D printer from Ultimaker, featuring dual extruders, swappable extrusion cores, an integrated camera for print monitoring, Wifi and USB printing, and much more! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWith the PRO Bundle, you have automatic material handling, efficient air filtering, and filament humidity control.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eActive bed leveling ensures a perfect first layer, a closed front controls\u003cbr\u003eairflow, and a filament flow sensor will pause your print and notify you if\u003cbr\u003eyou run out of material. Trust the S5 to do its job while you do yours.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003eThe Ultimaker S5 allows you to print with a wide range of materials, including Nylon, Tough PLA, ABS, CPE, and PVA. With its dual extruder system, you can print soluble support as you go, giving you more freedom to create the shapes you want.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003eAll new purchases of Ultimaker printers come with \u003ca href=\"https:\/\/ultimaker.com\/software\/ultimaker-essentials?utm_campaign=2021_Alwayson_srengineer_traffic_do_CA\u0026amp;utm_source=google\u0026amp;utm_medium=cpc\u0026amp;gclid=CjwKCAjw7--KBhAMEiwAxfpkWCfWmW8G3KtAbD3qNI3GZq6EZjy73myPZcE_fv71_U5JNUSS3xVVsRoCa1EQAvD_BwE\"\u003eUltimaker Essentials\u003c\/a\u003e A new cloud-based ecosystem for sharing and storing Cura Project files and remote printing from anywhere.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/ultimaker.com\/3d-printers\/ultimaker-s5\"\u003e\u003cspan\u003e\u003cspan\u003eManufacturers Website\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cstrong\u003e3 hours of free training at Voxel Factory.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003ch3\u003eUltimaker S5 3D Printer\u003c\/h3\u003e\n\u003ch3\u003eDimensions \u0026amp; Weight\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExternal dimensions: 342 x 505 x 588 mm \u003cspan\u003e(13.5 x 19.9 x 23.1 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 10.6 kg (23.3 lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePro Bundle Assembled dimensions: 495 x 500 x 1197 mm (19.5 x 19.5 x 47.1 inches)  \u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003ePro Bundle Weight: 59.0 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrinting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eTechnology: Fused Filament Fabrication (FFF)\u003c\/li\u003e\n\u003cli\u003eBuild dimensions : 330 x 240 x 300 mm \u003cspan\u003e(12.9 x 9.4 x 11.8 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuild volume : 23760 cm³ (571 in³)\u003c\/li\u003e\n\u003cli\u003eBuild volume (dual extrusion) : 8471 cm³ (1431 in³)\u003c\/li\u003e\n\u003cli\u003eLayer height: Starting at 20 microns\u003c\/li\u003e\n\u003cli\u003eFilament diameter: 2.85mm\u003c\/li\u003e\n\u003cli\u003eExtruder: Dual\u003c\/li\u003e\n\u003cli\u003eHotend : Swappable Print Cores \u003cspan\u003e(AA 0.25 mm, 0.4 mm or 0.8 mm),                        \u003c\/span\u003e(BB 0.4 mm or 0.8 mm) and (CC 0.4, and 0.6 mm)\u003c\/li\u003e\n\u003cli\u003eNozzle diameter: 0.4 mm (standard)\u003c\/li\u003e\n\u003cli\u003eMaximum nozzle temperature: 280°C\u003c\/li\u003e\n\u003cli\u003eHeatbed: Heated glass plate (up to 140\u003cspan\u003e°C)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eBed-leveling: Active bed leveling\u003c\/li\u003e\n\u003cli\u003eEnclosure: Front door\u003c\/li\u003e\n\u003cli\u003eInterface \u0026amp; Connectivity : LCD touchscreen, USB, Wifi\u003c\/li\u003e\n\u003cli\u003eAxis Motors: Step motors\u003c\/li\u003e\n\u003cli\u003ePower rating: 500 W\u003c\/li\u003e\n\u003cli\u003eLive camera (view from desktop or app)\u003c\/li\u003e\n\u003cli\u003eMaterial recognition: Auto-recognition with NFC scanner\u003c\/li\u003e\n\u003cli\u003eDisplay: 4.7-inch color touchscreen\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMaterial Handling Station\u003c\/h3\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003ePhysical Dimensions : 491 x 438 x 400 mm (19.3 x 17.2 x 15.7 in)\u003c\/li\u003e\n\u003cli\u003eNet weight: 17.7kg\u003c\/li\u003e\n\u003cli\u003eFilament diameter: 2.85mm\u003c\/li\u003e\n\u003cli\u003eMaterial spool dimensions :\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 50 - 70 mm (2 - 2.7 in)\u003c\/li\u003e\n\u003cli\u003eDiameter: 197 - 203 mm (7.8 - 8 in)\u003c\/li\u003e\n\u003cli\u003eCore diameter: \u0026gt; 98 mm (3.8 in)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eMaterial capacity: 6 spools\u003c\/li\u003e\n\u003cli\u003eMaterial recognition: auto-recognition with NFC scanner\u003c\/li\u003e\n\u003cli\u003eFeeder type: dual-geared, abrasion-resistant\u003c\/li\u003e\n\u003cli\u003eData connection : UMB (included)\u003c\/li\u003e\n\u003cli\u003ePower input : 85 - 264 VAC, max 125W\u003c\/li\u003e\n\u003cli\u003ePower output: max 10A (for Ultimaker S5)\u003c\/li\u003e\n\u003cli\u003eCompatible 3D printer:\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"Ultimaker S5 3D printer\" href=\"https:\/\/www.voxelfactory.com\/products\/ultimaker-s5-dual-extruder-3d-printer\" target=\"_blank\"\u003eUltimaker S5\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eSoftware integration: Ultimaker Cura, Ultimaker Connect, Ultimaker Cloud\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAir Manager\u003c\/h3\u003e\n\u003cp\u003ePhysical Dimensions : 490 x 503 x 350 mm (19.3 x 19.8 x 13.8 in)\u003c\/p\u003e\n\u003cp\u003eDimensions (including S5 printer) : 490 x 503 x 967 mm (19.3 x 19.8 x 38 in)\u003c\/p\u003e\n\u003cp\u003eNet weight: 3.6kg\u003c\/p\u003e\n\u003cp\u003eFilter technology: EPA E10 filter\u003c\/p\u003e\n\u003cp\u003eFan technology: low-noise brushless fan\u003c\/p\u003e\n\u003cp\u003eAir refresh rate: 1 - 50 m³\/h (35 m³\/h nominal rate for most materials at 23°C)\u003c\/p\u003e\n\u003cp\u003eFilter replacement is recommended every 1500 print hours (approx. 1 year)\u003c\/p\u003e\n\u003cp\u003eOperating sound: less than 51 dBA (including Ultimaker S5)\u003c\/p\u003e\n\u003cp\u003eCompatible printer: Ultimaker S5\u003c\/p\u003e\n\u003cp\u003eData \/ power connection: UMB connection (included)\u003c\/p\u003e\n\u003cp\u003eCompatible materials: Optimized for Ultimaker materials, 3rd party materials also supported.\u003c\/p\u003e\n\u003ch5\u003eSoftware\u003c\/h5\u003e\n\u003ch3\u003eSlicing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca title=\"Cura\" href=\"https:\/\/ultimaker.com\/en\/products\/cura-software\" target=\"_blank\"\u003eCura\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eControl\u003c\/h3\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca title=\"Repetier-Host\" href=\"https:\/\/www.repetier.com\/\"\u003eRepetier-Host\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"Link to Download page for Cura Connect by Ultimaker\" href=\"https:\/\/ultimaker.com\/en\/products\/ultimaker-cura-software\/cura-connect\" target=\"_blank\"\u003eCura Connect\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSupported OS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eMacOS, Windows and Linux\u003c\/li\u003e\n\u003cli\u003ePlugin integration : SolidWorks, Siemens NX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFile types\u003c\/h3\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eUltimaker Cura: STL, OBJ, X3D, 3MF, BMP, GIF, JPG, PNG\u003c\/li\u003e\n\u003cli\u003ePrintable formats: G, GCODE, GCODE.gz, UPF\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMaterials\u003c\/h5\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eOptimized for: PLA, Tough PLA, Nylon, ABS, CPE, CPE+, PC,\u003cbr\u003eTPU 95A, PP, PVA, Breakaway\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAlso supports third-party materials\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e"}

{"id":756386332790,"title":"Imprimante 3D double extrudeur Ultimaker S5","handle":"ultimaker-s5-dual-extruder-3d-printer","description":"\u003cdiv style=\"text-align: left;\"\u003e\u0026nbsp;\u003cbr\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\r\n\t\u003ca href=\"mailto:service@voxelfactory.com?subject=Quote%20for%20Ultimaker%20S5\u0026amp;body=Hi%2C%0A%0AI%20would%20like%20a%20quote%20for%20an%20Ultimaker%20S5.%0A%0A%5BPlease%20insert%20any%20other%20product%20you%20wish%20to%20have%20in%20the%20quote%2C%20like%20materials%20(NEW%20TOUGH%20PLA)%20and%20add-ons%5D%0A%0A%5BInsert%20your%20contact%20information%20for%20a%20faster%20quote%5D\" rel=\"noopener noreferrer\" style=\"background-color: #2baadf; border: none; color: white; padding: 15px 15px; text-align: center; text-decoration: none; display: inline-block; font-size: 16px; margin: 4px 2px; cursor: pointer; border-radius: 8px; box-shadow: 0px 5px 8px -9px rgba(0,0,0,0.24),0 9px 20px -1px rgba(0,0,0,0.19); -webkit-transition-duration: 0.4s; \/* safari *\/ transition-duration: 0.4s;\" target=\"_blank\" title=\"Send an email to ask for a quote\"\u003eDemander une soumission\u003c\/a\u003e\r\n\u003c\/div\u003e\r\n\u003cp\u003e\r\n\t\u0026nbsp;\r\n\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t\u003cspan\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline; color: #ff0000;\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003eLa nouvelle imprimante 3D d'Ultimaker met en vedette son système de double extrusion avec des buses facilement échangeable ainsi qu'une caméra intégrée, connexion WiFi , USB et bien plus!\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eUn nivellement actif garantit une première couche d'impression parfaite, un enclos contrôle le flux d'air, puis le détecteur de filament arrêtera l'impression et vous avisera quand il manque du filament. Faites confiance à la S5 de faire son travail pendant que vous faites le vôtre.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003eL'Ultimaker S5 vous permet d'imprimer avec une large gamme de matériaux 3D incluant parmi tant d'autres :\u0026nbsp;Nylon, Tough PLA, ABS, CPE et PVA. Avec son système de double extrusion, vous pouvez imprimer avec des supports solubles pour vous donner la liberté de créer les figures désirées sans limitations.\u0026nbsp;\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t\u003cspan\u003e\u003cspan\u003e\u003cstrong\u003eAtelier de\u0026nbsp;3 heures offert gratuitement avec chaque imprimante Ultimaker.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\r\n\u003c\/p\u003e\r\n\u003ch5\u003eSpecs\u003c\/h5\u003e\r\n\u003ch3\u003eDimensions \u0026amp; Poids\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003eDimensions externes: 342 x 505\u0026nbsp;x 588\u0026nbsp;mm \u003cspan\u003e(13.5 x 19.9 x 23.1 pouces)\u003c\/span\u003e\r\n\t\u003c\/li\u003e\r\n\t\u003cli\u003ePoids: 10.6 kg (23.3 lb)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch3\u003eImpression\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003eTechnologie :\u0026nbsp;Fused Filament Fabrication (FFF)\u003c\/li\u003e\r\n\t\u003cli\u003eDimensions d'impression : 330 x 240 x 300 mm\u0026nbsp;\u003cspan\u003e(12.9 x 9.4 x 11.8 pouces)\u003c\/span\u003e\r\n\t\u003c\/li\u003e\r\n\t\u003cli\u003eVolume d'impression :\u0026nbsp;23760 cm³\u0026nbsp;(571 in³)\u003c\/li\u003e\r\n\t\u003cli\u003eVolume d'impression\u0026nbsp;(extrusion double) : 8471 cm³ (1431 in³)\u003c\/li\u003e\r\n\t\u003cli\u003eHauteur de couche\u0026nbsp;: 20 microns et plus\u003c\/li\u003e\r\n\t\u003cli\u003eDiamètre du filament : 2.85mm\u003c\/li\u003e\r\n\t\u003cli\u003eExtrudeur :\u0026nbsp;Double\u003c\/li\u003e\r\n\t\u003cli\u003eTête chauffante : Print Cores échangeable (0.25 mm, 0.4 mm ou 0.8 mm)\u003c\/li\u003e\r\n\t\u003cli\u003eDiamètre de la buse : 0.4 mm (standard)\u003c\/li\u003e\r\n\t\u003cli\u003eTempérature maximale de la buse\u0026nbsp;: 280°C\u003c\/li\u003e\r\n\t\u003cli\u003ePlaque chauffante : Vitre chauffée (jusqu'à 140\u003cspan\u003e°C)\u003c\/span\u003e\r\n\t\u003c\/li\u003e\r\n\t\u003cli\u003eNivellement : Actif (propriétaire d'Ultimaker)\u003c\/li\u003e\r\n\t\u003cli\u003eEnclos : porte d'avant\u003c\/li\u003e\r\n\t\u003cli\u003eInterface \u0026amp; Connectivité : LCD tactile 4.7 pouces, USB, Wifi\u003c\/li\u003e\r\n\t\u003cli\u003eAxis Motors : Step motors\u003c\/li\u003e\r\n\t\u003cli\u003ePower rating : 500 W\u003c\/li\u003e\r\n\t\u003cli\u003eCaméra intégrée\u0026nbsp;(visible à partir du logiciel Cura et sur l'application)\u003c\/li\u003e\r\n\t\u003cli\u003eDétection de matériaux\u0026nbsp;: Autodétection par scanneur NFC\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch5\u003eLogiciel\u003c\/h5\u003e\r\n\u003ch3\u003eTranchage\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003e\u003ca href=\"https:\/\/ultimaker.com\/en\/products\/cura-software\" target=\"_blank\" title=\"Cura\" rel=\"noopener noreferrer\"\u003eCura\u003c\/a\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch3\u003eContrôle\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003e\u003ca href=\"https:\/\/www.repetier.com\/\" title=\"Repetier-Host\"\u003eRepetier-Host\u003c\/a\u003e\u003c\/li\u003e\r\n\t\u003cli\u003e\u003ca href=\"https:\/\/ultimaker.com\/en\/products\/ultimaker-cura-software\/cura-connect\" target=\"_blank\" title=\"Link to Download page for Cura Connect by Ultimaker\" rel=\"noopener noreferrer\"\u003eCura Connect\u003c\/a\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch3\u003eOS Supporté\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003eMacOS, Windows and Linux\u003c\/li\u003e\r\n\t\u003cli\u003ePlugin integration : SolidWorks, Siemens NX\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch3\u003eType de fichiers\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003eUltimaker Cura: STL, OBJ, X3D, 3MF, BMP, GIF, JPG, PNG\u003c\/li\u003e\r\n\t\u003cli\u003ePrintable formats: G, GCODE, GCODE.gz, UPF\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch5\u003eMatériaux\u003c\/h5\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003eOptimized for: PLA, Tough PLA, Nylon, ABS, CPE, CPE+, PC,\u003cbr\u003e\r\n\tTPU 95A, PP, PVA, Breakaway\u003c\/li\u003e\r\n\t\u003cli\u003e\u003cspan\u003eAlso supports third-party materials\u003c\/span\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch5\u003ePlus d'infos\u003c\/h5\u003e\r\n\u003cp\u003e\r\n\t\u003ca href=\"https:\/\/ultimaker.com\/en\/products\/ultimaker-3\" target=\"_blank\" title=\"Ultimaker 3 at ultimaker.com\" rel=\"noopener noreferrer\"\u003eManufacturer's\u0026nbsp;website\u003c\/a\u003e\r\n\u003c\/p\u003e","published_at":"2018-04-23T05:36:12-04:00","created_at":"2018-04-17T13:37:32-04:00","vendor":"Ultimaker","type":"Ultimaker 3D printers","tags":["3Dprinters","Ultimaker"],"price":938250,"price_min":938250,"price_max":938250,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":8122029408374,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UMK-3DP-US5-000-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Imprimante 3D double extrudeur Ultimaker S5","public_title":null,"options":["Default Title"],"price":938250,"weight":29000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"continue","barcode":"8719874982375","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s5-dual-extruder-3d-printer-1_1400x_13925b1b-202f-4141-a557-0bac861397e3.jpg?v=1642542836","\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s5-dual-extruder-3d-printer-2_1400x_334b44ec-4946-480b-b9c8-f2b62948dec7.jpg?v=1642542848","\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s5-dual-extruder-3d-printer-3_1400x_18e0b676-1a20-46ec-85b3-251eb9d70d7b.jpg?v=1642542860","\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s5-dual-extruder-3d-printer-4_1400x_c225bc20-3a44-4272-a659-5b43dcd93af2.jpg?v=1642542866"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s5-dual-extruder-3d-printer-1_1400x_13925b1b-202f-4141-a557-0bac861397e3.jpg?v=1642542836","options":["Title"],"media":[{"alt":null,"id":29047543922924,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s5-dual-extruder-3d-printer-1_1400x_13925b1b-202f-4141-a557-0bac861397e3.jpg?v=1642542836"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s5-dual-extruder-3d-printer-1_1400x_13925b1b-202f-4141-a557-0bac861397e3.jpg?v=1642542836","width":1400},{"alt":null,"id":29047544217836,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s5-dual-extruder-3d-printer-2_1400x_334b44ec-4946-480b-b9c8-f2b62948dec7.jpg?v=1642542848"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s5-dual-extruder-3d-printer-2_1400x_334b44ec-4946-480b-b9c8-f2b62948dec7.jpg?v=1642542848","width":1400},{"alt":null,"id":29047544545516,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s5-dual-extruder-3d-printer-3_1400x_18e0b676-1a20-46ec-85b3-251eb9d70d7b.jpg?v=1642542860"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s5-dual-extruder-3d-printer-3_1400x_18e0b676-1a20-46ec-85b3-251eb9d70d7b.jpg?v=1642542860","width":1400},{"alt":null,"id":29047544643820,"position":4,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s5-dual-extruder-3d-printer-4_1400x_c225bc20-3a44-4272-a659-5b43dcd93af2.jpg?v=1642542866"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s5-dual-extruder-3d-printer-4_1400x_c225bc20-3a44-4272-a659-5b43dcd93af2.jpg?v=1642542866","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv style=\"text-align: left;\"\u003e\u0026nbsp;\u003cbr\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\r\n\t\u003ca href=\"mailto:service@voxelfactory.com?subject=Quote%20for%20Ultimaker%20S5\u0026amp;body=Hi%2C%0A%0AI%20would%20like%20a%20quote%20for%20an%20Ultimaker%20S5.%0A%0A%5BPlease%20insert%20any%20other%20product%20you%20wish%20to%20have%20in%20the%20quote%2C%20like%20materials%20(NEW%20TOUGH%20PLA)%20and%20add-ons%5D%0A%0A%5BInsert%20your%20contact%20information%20for%20a%20faster%20quote%5D\" rel=\"noopener noreferrer\" style=\"background-color: #2baadf; border: none; color: white; padding: 15px 15px; text-align: center; text-decoration: none; display: inline-block; font-size: 16px; margin: 4px 2px; cursor: pointer; border-radius: 8px; box-shadow: 0px 5px 8px -9px rgba(0,0,0,0.24),0 9px 20px -1px rgba(0,0,0,0.19); -webkit-transition-duration: 0.4s; \/* safari *\/ transition-duration: 0.4s;\" target=\"_blank\" title=\"Send an email to ask for a quote\"\u003eDemander une soumission\u003c\/a\u003e\r\n\u003c\/div\u003e\r\n\u003cp\u003e\r\n\t\u0026nbsp;\r\n\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t\u003cspan\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline; color: #ff0000;\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003eLa nouvelle imprimante 3D d'Ultimaker met en vedette son système de double extrusion avec des buses facilement échangeable ainsi qu'une caméra intégrée, connexion WiFi , USB et bien plus!\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eUn nivellement actif garantit une première couche d'impression parfaite, un enclos contrôle le flux d'air, puis le détecteur de filament arrêtera l'impression et vous avisera quand il manque du filament. Faites confiance à la S5 de faire son travail pendant que vous faites le vôtre.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003eL'Ultimaker S5 vous permet d'imprimer avec une large gamme de matériaux 3D incluant parmi tant d'autres :\u0026nbsp;Nylon, Tough PLA, ABS, CPE et PVA. Avec son système de double extrusion, vous pouvez imprimer avec des supports solubles pour vous donner la liberté de créer les figures désirées sans limitations.\u0026nbsp;\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\r\n\t\u003cspan\u003e\u003cspan\u003e\u003cstrong\u003eAtelier de\u0026nbsp;3 heures offert gratuitement avec chaque imprimante Ultimaker.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\r\n\u003c\/p\u003e\r\n\u003ch5\u003eSpecs\u003c\/h5\u003e\r\n\u003ch3\u003eDimensions \u0026amp; Poids\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003eDimensions externes: 342 x 505\u0026nbsp;x 588\u0026nbsp;mm \u003cspan\u003e(13.5 x 19.9 x 23.1 pouces)\u003c\/span\u003e\r\n\t\u003c\/li\u003e\r\n\t\u003cli\u003ePoids: 10.6 kg (23.3 lb)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch3\u003eImpression\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003eTechnologie :\u0026nbsp;Fused Filament Fabrication (FFF)\u003c\/li\u003e\r\n\t\u003cli\u003eDimensions d'impression : 330 x 240 x 300 mm\u0026nbsp;\u003cspan\u003e(12.9 x 9.4 x 11.8 pouces)\u003c\/span\u003e\r\n\t\u003c\/li\u003e\r\n\t\u003cli\u003eVolume d'impression :\u0026nbsp;23760 cm³\u0026nbsp;(571 in³)\u003c\/li\u003e\r\n\t\u003cli\u003eVolume d'impression\u0026nbsp;(extrusion double) : 8471 cm³ (1431 in³)\u003c\/li\u003e\r\n\t\u003cli\u003eHauteur de couche\u0026nbsp;: 20 microns et plus\u003c\/li\u003e\r\n\t\u003cli\u003eDiamètre du filament : 2.85mm\u003c\/li\u003e\r\n\t\u003cli\u003eExtrudeur :\u0026nbsp;Double\u003c\/li\u003e\r\n\t\u003cli\u003eTête chauffante : Print Cores échangeable (0.25 mm, 0.4 mm ou 0.8 mm)\u003c\/li\u003e\r\n\t\u003cli\u003eDiamètre de la buse : 0.4 mm (standard)\u003c\/li\u003e\r\n\t\u003cli\u003eTempérature maximale de la buse\u0026nbsp;: 280°C\u003c\/li\u003e\r\n\t\u003cli\u003ePlaque chauffante : Vitre chauffée (jusqu'à 140\u003cspan\u003e°C)\u003c\/span\u003e\r\n\t\u003c\/li\u003e\r\n\t\u003cli\u003eNivellement : Actif (propriétaire d'Ultimaker)\u003c\/li\u003e\r\n\t\u003cli\u003eEnclos : porte d'avant\u003c\/li\u003e\r\n\t\u003cli\u003eInterface \u0026amp; Connectivité : LCD tactile 4.7 pouces, USB, Wifi\u003c\/li\u003e\r\n\t\u003cli\u003eAxis Motors : Step motors\u003c\/li\u003e\r\n\t\u003cli\u003ePower rating : 500 W\u003c\/li\u003e\r\n\t\u003cli\u003eCaméra intégrée\u0026nbsp;(visible à partir du logiciel Cura et sur l'application)\u003c\/li\u003e\r\n\t\u003cli\u003eDétection de matériaux\u0026nbsp;: Autodétection par scanneur NFC\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch5\u003eLogiciel\u003c\/h5\u003e\r\n\u003ch3\u003eTranchage\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003e\u003ca href=\"https:\/\/ultimaker.com\/en\/products\/cura-software\" target=\"_blank\" title=\"Cura\" rel=\"noopener noreferrer\"\u003eCura\u003c\/a\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch3\u003eContrôle\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003e\u003ca href=\"https:\/\/www.repetier.com\/\" title=\"Repetier-Host\"\u003eRepetier-Host\u003c\/a\u003e\u003c\/li\u003e\r\n\t\u003cli\u003e\u003ca href=\"https:\/\/ultimaker.com\/en\/products\/ultimaker-cura-software\/cura-connect\" target=\"_blank\" title=\"Link to Download page for Cura Connect by Ultimaker\" rel=\"noopener noreferrer\"\u003eCura Connect\u003c\/a\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch3\u003eOS Supporté\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003eMacOS, Windows and Linux\u003c\/li\u003e\r\n\t\u003cli\u003ePlugin integration : SolidWorks, Siemens NX\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch3\u003eType de fichiers\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003eUltimaker Cura: STL, OBJ, X3D, 3MF, BMP, GIF, JPG, PNG\u003c\/li\u003e\r\n\t\u003cli\u003ePrintable formats: G, GCODE, GCODE.gz, UPF\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch5\u003eMatériaux\u003c\/h5\u003e\r\n\u003cul\u003e\r\n\t\u003cli\u003eOptimized for: PLA, Tough PLA, Nylon, ABS, CPE, CPE+, PC,\u003cbr\u003e\r\n\tTPU 95A, PP, PVA, Breakaway\u003c\/li\u003e\r\n\t\u003cli\u003e\u003cspan\u003eAlso supports third-party materials\u003c\/span\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch5\u003ePlus d'infos\u003c\/h5\u003e\r\n\u003cp\u003e\r\n\t\u003ca href=\"https:\/\/ultimaker.com\/en\/products\/ultimaker-3\" target=\"_blank\" title=\"Ultimaker 3 at ultimaker.com\" rel=\"noopener noreferrer\"\u003eManufacturer's\u0026nbsp;website\u003c\/a\u003e\r\n\u003c\/p\u003e"}

{"id":3956271153270,"title":"Station de gestion de matériaux Ultimaker S5","handle":"material-handling-station-for-ultimaker-s5","description":"\u003cp\u003eFaites encore plus avec\u0026nbsp;votre\u0026nbsp;\u003ca href=\"\/fr\/products\/ultimaker-s5-dual-extruder-3d-printer\" target=\"_blank\" title=\"Ultimaker S5 3D printer\" rel=\"noopener noreferrer\"\u003eUltimaker S5\u003c\/a\u003e grâce à\u0026nbsp;la station de gestion de matériaux. Vous pouvez installer jusqu'à 6 bobines de filament dans l'enceinte fermée à humidité contrôlée. La station se synchronise avec\u0026nbsp;Cura et votre imprimante pour permettre de changer de bobine en cours d'impression, pour des impressions longues, sans interruption et sans souci.\u003c\/p\u003e\r\n\u003cp\u003ePrincipales caractéristiques\u0026nbsp;:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eChargement facile : chargez jusqu'à 6 bobines par l'avant de la machine.\u003c\/li\u003e\r\n\u003cli\u003eImpression continue : changement automatique de bobine lorsqu'une est vide.\u003c\/li\u003e\r\n\u003cli\u003eContrôle de l'humidité : avec la\u0026nbsp;gestion intelligente de l'atmosphère interne\u0026nbsp;et un dessicant auto-régénérateur, votre filament est conservé dans un environnement optimal.\u003c\/li\u003e\r\n\u003cli\u003eFacile à installer et à contrôler\u0026nbsp;: reconnaissance des \u003ca href=\"\/fr\/collections\/ultimaker-filaments\" target=\"_blank\" title=\"Ultimaker filaments\" rel=\"noopener noreferrer\"\u003ematériaux Ultimaker\u003c\/a\u003e par puce NFC, intégration complète à Cura\u003c\/li\u003e\r\n\u003cli\u003eCompatible avec les matériaux composites (fibre de carbone ou de verre)\u003c\/li\u003e\r\n\u003cli\u003eCompatible avec les\u0026nbsp;\u003ca href=\"\/fr\/collections\/ultimaker-filaments\" target=\"_blank\"\u003ematériaux\u0026nbsp;Ultimaker\u003c\/a\u003e et de tiers partis\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch5\u003eSpécifications\u003c\/h5\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eDimensions physiques :\u0026nbsp;491 x 438 x 400 mm (19.3 x 17.2 x 15.7 po)\u003c\/li\u003e\r\n\u003cli\u003ePoids net: 17.7kg\u003c\/li\u003e\r\n\u003cli\u003eDiamètre du filament: 2.85mm\u003c\/li\u003e\r\n\u003cli\u003eDimensions des bobines:\u003c\/li\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eLargeur: 50 - 70 mm (2 - 2.7 po)\u003c\/li\u003e\r\n\u003cli\u003eDiamètre: 197 - 203 mm (7.8 - 8 po)\u003c\/li\u003e\r\n\u003cli\u003eDiamètre de l'ouverture: \u0026gt; 98 mm (3.8 po)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cli\u003eCapacité : 6 bobines\u003c\/li\u003e\r\n\u003cli\u003eReconnaissance des matériaux : reconnaissance automatique avec lecteur NFC\u003c\/li\u003e\r\n\u003cli\u003eType d'extrudeur : double engrenage, résistant à l'abrasion\u003c\/li\u003e\r\n\u003cli\u003eConnection données: UMB (inclus)\u003c\/li\u003e\r\n\u003cli\u003eCourant entrant : 85 - 264V AC, max 125W\u003c\/li\u003e\r\n\u003cli\u003eCourant sortant : max 10A (pour Ultimaker S5)\u003c\/li\u003e\r\n\u003cli\u003eImprimante 3D compatible : \u003ca href=\"\/fr\/products\/ultimaker-s5-dual-extruder-3d-printer\" target=\"_blank\" title=\"Ultimaker S5 3D printer\" rel=\"noopener noreferrer\"\u003eUltimaker S5\u003c\/a\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003eIntégration logicielle\u0026nbsp;: Ultimaker Cura, Ultimaker Connect, Ultimaker Cloud\u003c\/li\u003e\r\n\u003c\/ul\u003e","published_at":"2019-09-24T07:55:51-04:00","created_at":"2019-08-29T14:03:21-04:00","vendor":"Ultimaker","type":"Ultimaker 3D printers","tags":["add-on","s5","ultimaker","ultimaker s5"],"price":512865,"price_min":512865,"price_max":512865,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29505191444598,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UMK-3DP-MHS-US5-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Station de gestion de matériaux Ultimaker S5","public_title":null,"options":["Default Title"],"price":512865,"weight":20000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"8719874980999","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-material-handling-station-for-ultimaker-s5-1_1400x_1400x_431d32db-3731-4dbf-ba6d-0b24845ca763.jpg?v=1642542970","\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-material-handling-station-for-ultimaker-s5-2_1400x_1400x_dbde428d-b1d9-4ee5-9e6c-65d662d8c3f2.jpg?v=1642542977","\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-material-handling-station-for-ultimaker-s5-3_1400x_1400x_20441de0-c187-44f6-bd26-753c92210700.jpg?v=1642542985"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-material-handling-station-for-ultimaker-s5-1_1400x_1400x_431d32db-3731-4dbf-ba6d-0b24845ca763.jpg?v=1642542970","options":["Title"],"media":[{"alt":null,"id":29047547035884,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-material-handling-station-for-ultimaker-s5-1_1400x_1400x_431d32db-3731-4dbf-ba6d-0b24845ca763.jpg?v=1642542970"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-material-handling-station-for-ultimaker-s5-1_1400x_1400x_431d32db-3731-4dbf-ba6d-0b24845ca763.jpg?v=1642542970","width":1400},{"alt":null,"id":29047547265260,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-material-handling-station-for-ultimaker-s5-2_1400x_1400x_dbde428d-b1d9-4ee5-9e6c-65d662d8c3f2.jpg?v=1642542977"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-material-handling-station-for-ultimaker-s5-2_1400x_1400x_dbde428d-b1d9-4ee5-9e6c-65d662d8c3f2.jpg?v=1642542977","width":1400},{"alt":null,"id":29047547363564,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-material-handling-station-for-ultimaker-s5-3_1400x_1400x_20441de0-c187-44f6-bd26-753c92210700.jpg?v=1642542985"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-material-handling-station-for-ultimaker-s5-3_1400x_1400x_20441de0-c187-44f6-bd26-753c92210700.jpg?v=1642542985","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eFaites encore plus avec\u0026nbsp;votre\u0026nbsp;\u003ca href=\"\/fr\/products\/ultimaker-s5-dual-extruder-3d-printer\" target=\"_blank\" title=\"Ultimaker S5 3D printer\" rel=\"noopener noreferrer\"\u003eUltimaker S5\u003c\/a\u003e grâce à\u0026nbsp;la station de gestion de matériaux. Vous pouvez installer jusqu'à 6 bobines de filament dans l'enceinte fermée à humidité contrôlée. La station se synchronise avec\u0026nbsp;Cura et votre imprimante pour permettre de changer de bobine en cours d'impression, pour des impressions longues, sans interruption et sans souci.\u003c\/p\u003e\r\n\u003cp\u003ePrincipales caractéristiques\u0026nbsp;:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eChargement facile : chargez jusqu'à 6 bobines par l'avant de la machine.\u003c\/li\u003e\r\n\u003cli\u003eImpression continue : changement automatique de bobine lorsqu'une est vide.\u003c\/li\u003e\r\n\u003cli\u003eContrôle de l'humidité : avec la\u0026nbsp;gestion intelligente de l'atmosphère interne\u0026nbsp;et un dessicant auto-régénérateur, votre filament est conservé dans un environnement optimal.\u003c\/li\u003e\r\n\u003cli\u003eFacile à installer et à contrôler\u0026nbsp;: reconnaissance des \u003ca href=\"\/fr\/collections\/ultimaker-filaments\" target=\"_blank\" title=\"Ultimaker filaments\" rel=\"noopener noreferrer\"\u003ematériaux Ultimaker\u003c\/a\u003e par puce NFC, intégration complète à Cura\u003c\/li\u003e\r\n\u003cli\u003eCompatible avec les matériaux composites (fibre de carbone ou de verre)\u003c\/li\u003e\r\n\u003cli\u003eCompatible avec les\u0026nbsp;\u003ca href=\"\/fr\/collections\/ultimaker-filaments\" target=\"_blank\"\u003ematériaux\u0026nbsp;Ultimaker\u003c\/a\u003e et de tiers partis\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch5\u003eSpécifications\u003c\/h5\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eDimensions physiques :\u0026nbsp;491 x 438 x 400 mm (19.3 x 17.2 x 15.7 po)\u003c\/li\u003e\r\n\u003cli\u003ePoids net: 17.7kg\u003c\/li\u003e\r\n\u003cli\u003eDiamètre du filament: 2.85mm\u003c\/li\u003e\r\n\u003cli\u003eDimensions des bobines:\u003c\/li\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eLargeur: 50 - 70 mm (2 - 2.7 po)\u003c\/li\u003e\r\n\u003cli\u003eDiamètre: 197 - 203 mm (7.8 - 8 po)\u003c\/li\u003e\r\n\u003cli\u003eDiamètre de l'ouverture: \u0026gt; 98 mm (3.8 po)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cli\u003eCapacité : 6 bobines\u003c\/li\u003e\r\n\u003cli\u003eReconnaissance des matériaux : reconnaissance automatique avec lecteur NFC\u003c\/li\u003e\r\n\u003cli\u003eType d'extrudeur : double engrenage, résistant à l'abrasion\u003c\/li\u003e\r\n\u003cli\u003eConnection données: UMB (inclus)\u003c\/li\u003e\r\n\u003cli\u003eCourant entrant : 85 - 264V AC, max 125W\u003c\/li\u003e\r\n\u003cli\u003eCourant sortant : max 10A (pour Ultimaker S5)\u003c\/li\u003e\r\n\u003cli\u003eImprimante 3D compatible : \u003ca href=\"\/fr\/products\/ultimaker-s5-dual-extruder-3d-printer\" target=\"_blank\" title=\"Ultimaker S5 3D printer\" rel=\"noopener noreferrer\"\u003eUltimaker S5\u003c\/a\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003eIntégration logicielle\u0026nbsp;: Ultimaker Cura, Ultimaker Connect, Ultimaker Cloud\u003c\/li\u003e\r\n\u003c\/ul\u003e"}

{"id":3956284031094,"title":"Enceinte ventilée Ultimaker S5 Air Manager","handle":"ultimaker-air-manager-for-ultimaker-s5","description":"\u003cp\u003ePlacée au-dessus de votre imprimante 3D\u0026nbsp;\u003ca href=\"\/fr\/products\/ultimaker-s5-dual-extruder-3d-printer\" target=\"_blank\" title=\"Ultimaker S5 3D printer\" rel=\"noopener noreferrer\"\u003eUltimaker S5\u003c\/a\u003e, l'enceinte\u0026nbsp;Air Manager assure une ventilation close pendant l'impression. Grâce au filtre E10 inclus, jusqu'à 95% des particules ultrafines (PUF) émises pendant l'impression sont capturées, vous offrant un environnement de travail plus propre et sûr.\u003c\/p\u003e\r\n\u003cp\u003eVia Cura and la\u0026nbsp;Ultimaker S5, l'enceinte Air Manager ajuste intelligement les flux d'air pendant l'impression, permettant des conditions d'impression optimales\u0026nbsp;pour une gamme plus large de matériaux qui seraient autrement difficiles à imprimer.\u003c\/p\u003e\u003cp\u003eDes\u0026nbsp;\u003ca href=\"\/fr\/collections\/original-ultimaker-parts\/products\/replacement-filter-for-ultimaker-air-manager\" target=\"_blank\"\u003efiltres de rechange\u003c\/a\u003e sont disponibles – on recommande de changer le filtre à toutes les 1500 heures d'impression, soit environ chaque année.\u003c\/p\u003e\r\n\u003cp\u003eCaractéristiques principales:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eFiltre EPA\u003c\/li\u003e\r\n\u003cli\u003eExtraction d'air contrôlée\u003c\/li\u003e\r\n\u003cli\u003eSûreté améliorée : barrière physique contre la poussière et les mains baladeuses\u003c\/li\u003e\r\n\u003cli\u003eAjustement des flux d'air selon le matériau employé\u003c\/li\u003e\r\n\u003cli\u003eFacile à installer, l'imprimante détecte automatiquement le périphérique lorsqu'il est branché\u003c\/li\u003e\r\n\u003cli\u003eSuivi intelligent : le remplacement du filtre sera suggéré automatiquement en fonction de l'utilisation\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch5\u003eSpécifications\u003c\/h5\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eDimensions physiques:\u0026nbsp;490 x 503 x 350 mm (19.3 x 19.8 x 13.8 po)\u0026nbsp;\u003c\/li\u003e\r\n\u003cli\u003eDimensions (avec imprimante\u0026nbsp;S5):\u0026nbsp;490 x 503 x 967 mm (19.3 x 19.8 x 38 po)\u003c\/li\u003e\r\n\u003cli\u003ePoids net: 3.6kg\u003c\/li\u003e\r\n\u003cli\u003eTechnologie de filtration: filtre EPA E10\u003c\/li\u003e\r\n\u003cli\u003eTechnologie de ventilation: ventilateur sans collecteur à faible niveau sonore\u003c\/li\u003e\r\n\u003cli\u003eTaux de remplacement d'air: 1 - 50 m³\/h (taux nominal de\u0026nbsp;35 m³\/h pour la plupart des matériaux à 23°C)\u003c\/li\u003e\r\n\u003cli\u003eRemplacement du filtre recommandé aux\u0026nbsp;1500 heures d'impression (environ 1 an)\u003c\/li\u003e\r\n\u003cli\u003eNiveau sonore : inférieur à 51 dBA (incluant Ultimaker S5)\u003c\/li\u003e\r\n\u003cli\u003eImprimante compatible : \u003ca href=\"\/fr\/products\/ultimaker-s5-dual-extruder-3d-printer\" target=\"_blank\" title=\"Ultimaker S5\" rel=\"noopener noreferrer\"\u003eUltimaker S5\u003c\/a\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003eConnexion données \/ courant : UMB (inclus)\u003c\/li\u003e\r\n\u003cli\u003eMatériaux compatibles : optimisé pour les\u0026nbsp;\u003ca href=\"\/fr\/collections\/ultimaker-filaments\" target=\"_blank\" title=\"Ultimaker filaments\" rel=\"noopener noreferrer\"\u003ematériaux Ultimaker\u003c\/a\u003e, matériaux de tiers parti également supportés.\u003c\/li\u003e\u003cli\u003eIntégration logicielle : Cura\u003c\/li\u003e\r\n\u003c\/ul\u003e","published_at":"2019-09-24T07:55:51-04:00","created_at":"2019-08-29T14:45:22-04:00","vendor":"Ultimaker","type":"Ultimaker 3D printers","tags":["add-on","enclosure","s5","ultimaker"],"price":141615,"price_min":141615,"price_max":141615,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29505260650614,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UMK-3DP-AIR-US5-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Enceinte ventilée Ultimaker S5 Air Manager","public_title":null,"options":["Default Title"],"price":141615,"weight":8100,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"continue","barcode":"8719874981002","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-s5-1_1400x_1400x_c5cf4371-3e44-4b7a-8d07-261f6ad8723e.jpg?v=1642543068","\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-s5-2_1400x_1400x_f17b4fa1-bb4a-49bb-a3ee-af92376649ba.jpg?v=1642543167","\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-s5-3_1400x_1400x_847f8607-3e25-43ce-9ce7-03ade6f0b7ce.jpg?v=1642543177"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-s5-1_1400x_1400x_c5cf4371-3e44-4b7a-8d07-261f6ad8723e.jpg?v=1642543068","options":["Title"],"media":[{"alt":null,"id":29047548969196,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-s5-1_1400x_1400x_c5cf4371-3e44-4b7a-8d07-261f6ad8723e.jpg?v=1642543068"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-s5-1_1400x_1400x_c5cf4371-3e44-4b7a-8d07-261f6ad8723e.jpg?v=1642543068","width":1400},{"alt":null,"id":29047551656172,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-s5-2_1400x_1400x_f17b4fa1-bb4a-49bb-a3ee-af92376649ba.jpg?v=1642543167"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-s5-2_1400x_1400x_f17b4fa1-bb4a-49bb-a3ee-af92376649ba.jpg?v=1642543167","width":1400},{"alt":null,"id":29047552049388,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-s5-3_1400x_1400x_847f8607-3e25-43ce-9ce7-03ade6f0b7ce.jpg?v=1642543177"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-s5-3_1400x_1400x_847f8607-3e25-43ce-9ce7-03ade6f0b7ce.jpg?v=1642543177","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003ePlacée au-dessus de votre imprimante 3D\u0026nbsp;\u003ca href=\"\/fr\/products\/ultimaker-s5-dual-extruder-3d-printer\" target=\"_blank\" title=\"Ultimaker S5 3D printer\" rel=\"noopener noreferrer\"\u003eUltimaker S5\u003c\/a\u003e, l'enceinte\u0026nbsp;Air Manager assure une ventilation close pendant l'impression. Grâce au filtre E10 inclus, jusqu'à 95% des particules ultrafines (PUF) émises pendant l'impression sont capturées, vous offrant un environnement de travail plus propre et sûr.\u003c\/p\u003e\r\n\u003cp\u003eVia Cura and la\u0026nbsp;Ultimaker S5, l'enceinte Air Manager ajuste intelligement les flux d'air pendant l'impression, permettant des conditions d'impression optimales\u0026nbsp;pour une gamme plus large de matériaux qui seraient autrement difficiles à imprimer.\u003c\/p\u003e\u003cp\u003eDes\u0026nbsp;\u003ca href=\"\/fr\/collections\/original-ultimaker-parts\/products\/replacement-filter-for-ultimaker-air-manager\" target=\"_blank\"\u003efiltres de rechange\u003c\/a\u003e sont disponibles – on recommande de changer le filtre à toutes les 1500 heures d'impression, soit environ chaque année.\u003c\/p\u003e\r\n\u003cp\u003eCaractéristiques principales:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eFiltre EPA\u003c\/li\u003e\r\n\u003cli\u003eExtraction d'air contrôlée\u003c\/li\u003e\r\n\u003cli\u003eSûreté améliorée : barrière physique contre la poussière et les mains baladeuses\u003c\/li\u003e\r\n\u003cli\u003eAjustement des flux d'air selon le matériau employé\u003c\/li\u003e\r\n\u003cli\u003eFacile à installer, l'imprimante détecte automatiquement le périphérique lorsqu'il est branché\u003c\/li\u003e\r\n\u003cli\u003eSuivi intelligent : le remplacement du filtre sera suggéré automatiquement en fonction de l'utilisation\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch5\u003eSpécifications\u003c\/h5\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eDimensions physiques:\u0026nbsp;490 x 503 x 350 mm (19.3 x 19.8 x 13.8 po)\u0026nbsp;\u003c\/li\u003e\r\n\u003cli\u003eDimensions (avec imprimante\u0026nbsp;S5):\u0026nbsp;490 x 503 x 967 mm (19.3 x 19.8 x 38 po)\u003c\/li\u003e\r\n\u003cli\u003ePoids net: 3.6kg\u003c\/li\u003e\r\n\u003cli\u003eTechnologie de filtration: filtre EPA E10\u003c\/li\u003e\r\n\u003cli\u003eTechnologie de ventilation: ventilateur sans collecteur à faible niveau sonore\u003c\/li\u003e\r\n\u003cli\u003eTaux de remplacement d'air: 1 - 50 m³\/h (taux nominal de\u0026nbsp;35 m³\/h pour la plupart des matériaux à 23°C)\u003c\/li\u003e\r\n\u003cli\u003eRemplacement du filtre recommandé aux\u0026nbsp;1500 heures d'impression (environ 1 an)\u003c\/li\u003e\r\n\u003cli\u003eNiveau sonore : inférieur à 51 dBA (incluant Ultimaker S5)\u003c\/li\u003e\r\n\u003cli\u003eImprimante compatible : \u003ca href=\"\/fr\/products\/ultimaker-s5-dual-extruder-3d-printer\" target=\"_blank\" title=\"Ultimaker S5\" rel=\"noopener noreferrer\"\u003eUltimaker S5\u003c\/a\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003eConnexion données \/ courant : UMB (inclus)\u003c\/li\u003e\r\n\u003cli\u003eMatériaux compatibles : optimisé pour les\u0026nbsp;\u003ca href=\"\/fr\/collections\/ultimaker-filaments\" target=\"_blank\" title=\"Ultimaker filaments\" rel=\"noopener noreferrer\"\u003ematériaux Ultimaker\u003c\/a\u003e, matériaux de tiers parti également supportés.\u003c\/li\u003e\u003cli\u003eIntégration logicielle : Cura\u003c\/li\u003e\r\n\u003c\/ul\u003e"}

{"id":3956269547638,"title":"Imprimante 3D double extrudeur Ultimaker S3","handle":"ultimaker-s3-dual-extruder-3d-printer","description":"\u003cp\u003eLe nouveau produit de la gamme S d'Ultimaker, la Ultimaker S3 offre les avantages de la Ultimaker S5 dans un format compact et efficace. Prête à l'impression de matériaux abrasifs (fibre de carbone ou de verre) pour des pièces imprimées plus solides et résistantes, et plus fiable que jamais, l'imprimante 3D Ultimaker S3 vous aidera à simplifier et rationaliser\u0026nbsp;vos méthodes de travail pour la production de pièces et de prototypes.\u003c\/p\u003e\r\n\u003cp\u003eLa Ultimaker S3 peut imprimer un vaste choix de matériaux, incluant le\u0026nbsp;Nylon, le PLA, l'ABS, le CPE et le PVA. Grâce à son système à double extrudeur, vous pouvez imprimer du support détachable ou soluble pour les pièces aux géométries complexes, vous donnant la liberté de créer les formes que vous souhaitez. Une bobine de PLA Tough et une bobine de PVA sont incluses avec l'imprimante.\u003c\/p\u003e\r\n\u003cp\u003ePrincipales caractéristiques\u0026nbsp;:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eConnectivité réseau via WIFI, LAN, ou nuage. Impression via clé USB également disponible.\u003c\/li\u003e\r\n\u003cli\u003ePorte avant pour un environnement d'impression contrôlé et sûr.\u003c\/li\u003e\r\n\u003cli\u003eNiveau du lit actif avancé, pour une première couche fiable. Permet l'utilisation sans supervision.\u003c\/li\u003e\r\n\u003cli\u003eReconnaissance des matériaux et têtes d'impression par puce NFC, intégrée à Cura\u003c\/li\u003e\r\n\u003cli\u003eDétecteur de filament, met en pause l'imprimante en cas de manque de matériel\u003c\/li\u003e\r\n\u003cli\u003eCompatible avec les matériaux composites, renforcés à la fibre de carbone ou de verre\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003e3 heures d'atelier de démarrage offert gratuitement à Voxel Factory ou en ligne.\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003ch5\u003eSpécifications\u003c\/h5\u003e\r\n\u003ch3\u003ePoids \u0026amp; dimensions\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eDimensions externes: 394 x 489 x 637 mm (15.5 x 19.3 x 25.1 po)\u003c\/li\u003e\r\n\u003cli\u003ePoids net: 14.4 kg (31.7 lb)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch3\u003eImpression\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eTechnologie: dépôt de fil en fusion\u0026nbsp;(FFF)\u003c\/li\u003e\r\n\u003cli\u003eDimensions d'impression : 230 x 190 x 200 mm (9 x 7.4 x 7.9 po)\u003c\/li\u003e\r\n\u003cli\u003eVolume d'impression : 8740cm³\u0026nbsp;(526in³)\u003c\/li\u003e\r\n\u003cli\u003eHauteur de couche : à partir de\u0026nbsp;20 microns\u003c\/li\u003e\r\n\u003cli\u003eDiamètre du filament : 2.85mm\u003c\/li\u003e\r\n\u003cli\u003eExtrudeur: double extrudeur, renforcés\u003c\/li\u003e\r\n\u003cli\u003eTête chauffante: double têtes d'impression interchangeables\u003c\/li\u003e\r\n\u003cli\u003eDiamètre de buse\u0026nbsp;: \u003ca href=\"\/fr\/products\/ultimaker-print-core-0-4mm\" target=\"_blank\" title=\"Ultimaker print core 0.4mm\" rel=\"noopener noreferrer\"\u003e0.4mm\u003c\/a\u003e (inclus),\u0026nbsp;\u003ca href=\"\/fr\/products\/ultimaker-print-core-0-25mm\" target=\"_blank\" title=\"Ultimaker Print Core 0.25mm\" rel=\"noopener noreferrer\"\u003e0.25mm\u003c\/a\u003e, , \u003ca href=\"\/fr\/products\/ultimaker-print-core-cc-0-6mm\" target=\"_blank\" title=\"Ultimaker print core CC 0.6mm\" rel=\"noopener noreferrer\"\u003e0.6mm\u003c\/a\u003e or \u003ca href=\"\/fr\/products\/ultimaker-print-core-0-8mm\" target=\"_blank\" title=\"Ultimaker print core 0.8mm\" rel=\"noopener noreferrer\"\u003e0.8mm\u003c\/a\u003e (disponibles séparément)\u003c\/li\u003e\r\n\u003cli\u003eTempérature maximale de buse\u0026nbsp;: 280°C\u003c\/li\u003e\r\n\u003cli\u003eLit chauffant: vitre chauffée (20 -\u0026nbsp;140°C)\u003c\/li\u003e\r\n\u003cli\u003eNiveau du lit\u0026nbsp;: niveau actif avancé\u003c\/li\u003e\r\n\u003cli\u003eEnceinte: porte avant\u003c\/li\u003e\r\n\u003cli\u003eInterface \u0026amp; connectivité: écran tactile, USB, Wifi, LAN\u003c\/li\u003e\r\n\u003cli\u003eMoteurs des axes : moteurs pas-à-pas\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch5\u003eLogiciel\u003c\/h5\u003e\r\n\u003ch3\u003eDécoupe des modèles\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\u003ca href=\"https:\/\/ultimaker.com\/en\/products\/cura-software\" target=\"_blank\" title=\"Cura\" rel=\"noopener noreferrer\"\u003eCura\u003c\/a\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch3\u003eContrôle\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\u003ca href=\"https:\/\/ultimaker.com\/software\/ultimaker-cura\" target=\"_blank\" title=\"Ultimaker Cura at ultimaker.com\" rel=\"noopener noreferrer\"\u003eCura\u003c\/a\u003e\u003c\/li\u003e\r\n\u003cli\u003eCura Connect\u003c\/li\u003e\r\n\u003cli\u003eUltimaker Cloud\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch3\u003eTypes de fichiers\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eSTL, OBJ, AMF\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch5\u003eMatériaux\u003c\/h5\u003e\r\n\u003cul\u003e\r\n\u003cli\u003ePLA, ABS, CPE, CPE+, PC, Nylon, TPU 95A, PP, matériaux de tiers partis.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch5\u003ePlus d'information\u003c\/h5\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/ultimaker.com\/en\/products\/ultimaker-S3\" target=\"_blank\" title=\"Ultimaker 3 at ultimaker.com\" rel=\"noopener noreferrer\"\u003eSite web du fabricant\u003c\/a\u003e\u003c\/p\u003e","published_at":"2019-09-24T07:55:51-04:00","created_at":"2019-08-29T13:59:57-04:00","vendor":"Ultimaker","type":"Ultimaker 3D printers","tags":[],"price":600750,"price_min":600750,"price_max":600750,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29505185579126,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UMK-3DP-US3-STD-285","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Imprimante 3D double extrudeur Ultimaker S3","public_title":null,"options":["Default Title"],"price":600750,"weight":16500,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"continue","barcode":"8719874961026","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s3-dual-extruder-3d-printer-1_1400x_0476675f-981f-427a-8af6-d1183aebbecb.jpg?v=1642543347","\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s3-dual-extruder-3d-printer-2_1400x_efdd8441-89b3-4a92-a4b3-3343e2f6a1c8.jpg?v=1642543355","\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s3-dual-extruder-3d-printer-3_1400x_aa5f33f6-841b-44f6-851f-a86b36bbeeee.jpg?v=1642543367","\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s3-dual-extruder-3d-printer-3_1400x-2_1400x_f1e16716-8b63-42a8-a8b6-15beaf9f20eb.jpg?v=1644246041"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s3-dual-extruder-3d-printer-1_1400x_0476675f-981f-427a-8af6-d1183aebbecb.jpg?v=1642543347","options":["Title"],"media":[{"alt":null,"id":29047557030124,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s3-dual-extruder-3d-printer-1_1400x_0476675f-981f-427a-8af6-d1183aebbecb.jpg?v=1642543347"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s3-dual-extruder-3d-printer-1_1400x_0476675f-981f-427a-8af6-d1183aebbecb.jpg?v=1642543347","width":1400},{"alt":null,"id":29047557259500,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s3-dual-extruder-3d-printer-2_1400x_efdd8441-89b3-4a92-a4b3-3343e2f6a1c8.jpg?v=1642543355"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s3-dual-extruder-3d-printer-2_1400x_efdd8441-89b3-4a92-a4b3-3343e2f6a1c8.jpg?v=1642543355","width":1400},{"alt":null,"id":29047557587180,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s3-dual-extruder-3d-printer-3_1400x_aa5f33f6-841b-44f6-851f-a86b36bbeeee.jpg?v=1642543367"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s3-dual-extruder-3d-printer-3_1400x_aa5f33f6-841b-44f6-851f-a86b36bbeeee.jpg?v=1642543367","width":1400},{"alt":null,"id":29148121956588,"position":4,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s3-dual-extruder-3d-printer-3_1400x-2_1400x_f1e16716-8b63-42a8-a8b6-15beaf9f20eb.jpg?v=1644246041"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-s3-dual-extruder-3d-printer-3_1400x-2_1400x_f1e16716-8b63-42a8-a8b6-15beaf9f20eb.jpg?v=1644246041","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eLe nouveau produit de la gamme S d'Ultimaker, la Ultimaker S3 offre les avantages de la Ultimaker S5 dans un format compact et efficace. Prête à l'impression de matériaux abrasifs (fibre de carbone ou de verre) pour des pièces imprimées plus solides et résistantes, et plus fiable que jamais, l'imprimante 3D Ultimaker S3 vous aidera à simplifier et rationaliser\u0026nbsp;vos méthodes de travail pour la production de pièces et de prototypes.\u003c\/p\u003e\r\n\u003cp\u003eLa Ultimaker S3 peut imprimer un vaste choix de matériaux, incluant le\u0026nbsp;Nylon, le PLA, l'ABS, le CPE et le PVA. Grâce à son système à double extrudeur, vous pouvez imprimer du support détachable ou soluble pour les pièces aux géométries complexes, vous donnant la liberté de créer les formes que vous souhaitez. Une bobine de PLA Tough et une bobine de PVA sont incluses avec l'imprimante.\u003c\/p\u003e\r\n\u003cp\u003ePrincipales caractéristiques\u0026nbsp;:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eConnectivité réseau via WIFI, LAN, ou nuage. Impression via clé USB également disponible.\u003c\/li\u003e\r\n\u003cli\u003ePorte avant pour un environnement d'impression contrôlé et sûr.\u003c\/li\u003e\r\n\u003cli\u003eNiveau du lit actif avancé, pour une première couche fiable. Permet l'utilisation sans supervision.\u003c\/li\u003e\r\n\u003cli\u003eReconnaissance des matériaux et têtes d'impression par puce NFC, intégrée à Cura\u003c\/li\u003e\r\n\u003cli\u003eDétecteur de filament, met en pause l'imprimante en cas de manque de matériel\u003c\/li\u003e\r\n\u003cli\u003eCompatible avec les matériaux composites, renforcés à la fibre de carbone ou de verre\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003e3 heures d'atelier de démarrage offert gratuitement à Voxel Factory ou en ligne.\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003ch5\u003eSpécifications\u003c\/h5\u003e\r\n\u003ch3\u003ePoids \u0026amp; dimensions\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eDimensions externes: 394 x 489 x 637 mm (15.5 x 19.3 x 25.1 po)\u003c\/li\u003e\r\n\u003cli\u003ePoids net: 14.4 kg (31.7 lb)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch3\u003eImpression\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eTechnologie: dépôt de fil en fusion\u0026nbsp;(FFF)\u003c\/li\u003e\r\n\u003cli\u003eDimensions d'impression : 230 x 190 x 200 mm (9 x 7.4 x 7.9 po)\u003c\/li\u003e\r\n\u003cli\u003eVolume d'impression : 8740cm³\u0026nbsp;(526in³)\u003c\/li\u003e\r\n\u003cli\u003eHauteur de couche : à partir de\u0026nbsp;20 microns\u003c\/li\u003e\r\n\u003cli\u003eDiamètre du filament : 2.85mm\u003c\/li\u003e\r\n\u003cli\u003eExtrudeur: double extrudeur, renforcés\u003c\/li\u003e\r\n\u003cli\u003eTête chauffante: double têtes d'impression interchangeables\u003c\/li\u003e\r\n\u003cli\u003eDiamètre de buse\u0026nbsp;: \u003ca href=\"\/fr\/products\/ultimaker-print-core-0-4mm\" target=\"_blank\" title=\"Ultimaker print core 0.4mm\" rel=\"noopener noreferrer\"\u003e0.4mm\u003c\/a\u003e (inclus),\u0026nbsp;\u003ca href=\"\/fr\/products\/ultimaker-print-core-0-25mm\" target=\"_blank\" title=\"Ultimaker Print Core 0.25mm\" rel=\"noopener noreferrer\"\u003e0.25mm\u003c\/a\u003e, , \u003ca href=\"\/fr\/products\/ultimaker-print-core-cc-0-6mm\" target=\"_blank\" title=\"Ultimaker print core CC 0.6mm\" rel=\"noopener noreferrer\"\u003e0.6mm\u003c\/a\u003e or \u003ca href=\"\/fr\/products\/ultimaker-print-core-0-8mm\" target=\"_blank\" title=\"Ultimaker print core 0.8mm\" rel=\"noopener noreferrer\"\u003e0.8mm\u003c\/a\u003e (disponibles séparément)\u003c\/li\u003e\r\n\u003cli\u003eTempérature maximale de buse\u0026nbsp;: 280°C\u003c\/li\u003e\r\n\u003cli\u003eLit chauffant: vitre chauffée (20 -\u0026nbsp;140°C)\u003c\/li\u003e\r\n\u003cli\u003eNiveau du lit\u0026nbsp;: niveau actif avancé\u003c\/li\u003e\r\n\u003cli\u003eEnceinte: porte avant\u003c\/li\u003e\r\n\u003cli\u003eInterface \u0026amp; connectivité: écran tactile, USB, Wifi, LAN\u003c\/li\u003e\r\n\u003cli\u003eMoteurs des axes : moteurs pas-à-pas\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch5\u003eLogiciel\u003c\/h5\u003e\r\n\u003ch3\u003eDécoupe des modèles\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\u003ca href=\"https:\/\/ultimaker.com\/en\/products\/cura-software\" target=\"_blank\" title=\"Cura\" rel=\"noopener noreferrer\"\u003eCura\u003c\/a\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch3\u003eContrôle\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\u003ca href=\"https:\/\/ultimaker.com\/software\/ultimaker-cura\" target=\"_blank\" title=\"Ultimaker Cura at ultimaker.com\" rel=\"noopener noreferrer\"\u003eCura\u003c\/a\u003e\u003c\/li\u003e\r\n\u003cli\u003eCura Connect\u003c\/li\u003e\r\n\u003cli\u003eUltimaker Cloud\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch3\u003eTypes de fichiers\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eSTL, OBJ, AMF\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch5\u003eMatériaux\u003c\/h5\u003e\r\n\u003cul\u003e\r\n\u003cli\u003ePLA, ABS, CPE, CPE+, PC, Nylon, TPU 95A, PP, matériaux de tiers partis.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch5\u003ePlus d'information\u003c\/h5\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/ultimaker.com\/en\/products\/ultimaker-S3\" target=\"_blank\" title=\"Ultimaker 3 at ultimaker.com\" rel=\"noopener noreferrer\"\u003eSite web du fabricant\u003c\/a\u003e\u003c\/p\u003e"}

{"id":6059531567284,"title":"Imprimante 3D à buse unique Ultimaker 2+ Connect","handle":"ultimaker-2-connect-3d-printer","description":"\u003cp\u003eLa dernière nouveauté de la gamme d'imprimantes\u0026nbsp;FFF d'Ultimaker, l'Ultimaker 2+ Connect. Une imprimante à buse unique avec des capacités de mise en réseau et un nouvel écran tactile, l'Ultimaker 2+ Connect est votre premier pas fiable dans notre monde d'impression 3D facile et accessible. Il suffit de déballer, de connecter trois composants et vous êtes prêt à commencer. Cette configuration rapide permet même d'installer plusieurs imprimantes 3D sans effort.\u003c\/p\u003e\r\n\u003cp\u003eL'Ultimaker 2+ Connect vous permet d'imprimer avec une large gamme de matériaux tel que le nylon, le PLA, l'ABS, le CPE et le TPU. L'imprimante est livrée avec une bobine de PLA Ultimaker Silver, 750g.\u003c\/p\u003e\r\n\u003cp\u003e\u0026nbsp;Caractéristiques principales\u0026nbsp;:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eConnection réseau\u0026nbsp;: Via Wi-Fi ou Ethernet, imprimez à distance sur le cloud avec une sécurité accrue\u003c\/li\u003e\r\n\u003cli\u003eComposants de nouvelle génération\u0026nbsp;: Une plateforme de construction plus rigide et des profils de matériaux rigoureusement testés qui garantissent une impression fiable\u003c\/li\u003e\r\n\u003cli\u003eÉcran tactile : Pour chaque action, l'écran tactile couleur de 2,4'' vous offre un contrôle intuitif et une assistance.\u003c\/li\u003e\r\n\u003cli\u003eReconnaissance des matériaux par NFC avec intégration complète du logiciel Cura\u003c\/li\u003e\r\n\u003cli\u003eSécurité renforcée : L'Ultimaker 2+ Connect Air élimine jusqu'à 95% des particules ultrafines et protège les utilisateurs des composants chauds (vendu séparément).\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eTout les nouveaux achats d'imprimantes Ultimaker sont accompagnés d'\u003ca href=\"https:\/\/ultimaker.com\/software\/ultimaker-essentials?utm_campaign=2021_Alwayson_srengineer_traffic_do_CA\u0026amp;utm_source=google\u0026amp;utm_medium=cpc\u0026amp;gclid=CjwKCAjw7--KBhAMEiwAxfpkWCfWmW8G3KtAbD3qNI3GZq6EZjy73myPZcE_fv71_U5JNUSS3xVVsRoCa1EQAvD_BwE\" style=\"background-color: rgb(255, 255, 255); outline: 0px;\"\u003eUltimaker Essentials\u003c\/a\u003e, un nouvel écosystème basé sur le cloud pour le partage et le stockage des fichiers du projet Cura et l'impression à distance de n'importe où.\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/ultimaker.com\/3d-printers\/ultimaker-s5\"\u003eSite internet du fabricant\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e3 heures de formation gratuite à\u0026nbsp;Voxel Factory.\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003ePrix groupés disponibles avec les accessoires Air Manager\/Door. Envoyez-nous un courriel pour une soumission !\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003ch5\u003eSpecs\u003c\/h5\u003e\r\n\u003ch3\u003eDimensions \u0026amp; Poids\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eDimensions extérieures\u0026nbsp;: 342 x 460 x 580 mm (13.5 x 18.1 x 22.8 pouces)\u003c\/li\u003e\r\n\u003cli\u003ePoids net\u0026nbsp;: 10.3 kg (22.7 lbs)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch3\u003eImpression\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eTechnologie : Fabrication de Filaments Fusionnés\u0026nbsp;(FFF)\u003c\/li\u003e\r\n\u003cli\u003eExtrusion unique avec buses interchangeables\u0026nbsp;\u003c\/li\u003e\u003cli\u003eDiamètre de la buse\u0026nbsp;: 0.4 mm (inclus)\u003cbr\u003e0.25, 0.6, 0.8 mm (vendus séparément)\u003c\/li\u003e\r\n\u003cli\u003eRésolution des couches\u0026nbsp;: Buse de\u0026nbsp;0.25 mm : 150 - 60 micron\u003cbr data-mce-fragment=\"1\"\u003e\u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; Buse de\u0026nbsp;0.4 mm : 200 - 20 micron\u003cbr data-mce-fragment=\"1\"\u003e\u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; Buse de\u0026nbsp;0.6 mm : 400 - 20 micron\u003cbr data-mce-fragment=\"1\"\u003e\u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; Buse de\u0026nbsp;0.8 mm : 600 - 20 micron\u003c\/li\u003e\r\n\u003cli\u003eDimensions du boîtier\u0026nbsp;: 223 x 220 x 205 mm (8.7 x 8.6 x 8 pouces)\u003c\/li\u003e\r\n\u003cli\u003eDiamètre du filament : 2.85mm\u003c\/li\u003e\r\n\u003cli\u003eTempérature maximale de la buse\u0026nbsp;: 280°C\u003c\/li\u003e\r\n\u003cli\u003eLit chauffant : plaque de verre chauffée\u0026nbsp;(20 -\u0026nbsp;110°C)\u003c\/li\u003e\r\n\u003cli\u003eMise à niveau du lit : Mise à niveau manuelle\u003c\/li\u003e\u003cli\u003eBoîtier : The Ultimaker 2+ Connect Air\u003c\/li\u003e\u003cli\u003eManager (vendu séparément)\u003c\/li\u003e\r\n\u003cli\u003eInterface \u0026amp; Connectivité : écran tactile, USB, Wifi\u003c\/li\u003e\r\n\u003cli\u003eMoteurs d'axe\u0026nbsp;: moteurs pas à pas\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch5\u003eLogiciel\u003c\/h5\u003e\r\n\u003ch3\u003eDécoupage\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\u003ca title=\"Cura\" href=\"https:\/\/ultimaker.com\/en\/products\/cura-software\" target=\"_blank\"\u003eCura\u003c\/a\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch3\u003eContrôle\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\u003ca title=\"Ultimaker Cura at ultimaker.com\" href=\"https:\/\/ultimaker.com\/software\/ultimaker-cura\" target=\"_blank\"\u003eCura\u003c\/a\u003e\u003c\/li\u003e\r\n\u003cli\u003eCura Connect\u003c\/li\u003e\r\n\u003cli\u003eUltimaker Cloud\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch3\u003eTypes de fichiers\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eSTL, OBJ, AMF\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch5\u003eMatériaux\u003c\/h5\u003e\r\n\u003cul\u003e\r\n\u003cli\u003ePLA\u003c\/li\u003e\r\n\u003cli\u003eABS\u003c\/li\u003e\r\n\u003cli\u003eCPE \/ CPE+\u003c\/li\u003e\r\n\u003cli\u003ePC\u003c\/li\u003e\r\n\u003cli\u003eNylon\u003c\/li\u003e\r\n\u003cli\u003eTPU 95A\u003c\/li\u003e\r\n\u003cli\u003ePP\u003c\/li\u003e\r\n\u003cli\u003eMatériaux tiers.\u003c\/li\u003e\r\n\u003c\/ul\u003e","published_at":"2020-11-10T04:00:01-05:00","created_at":"2020-11-05T17:37:49-05:00","vendor":"Ultimaker","type":"Ultimaker 3D printers","tags":["2.85mm","3Dprinters","nozzle","Ultimaker"],"price":349900,"price_min":349900,"price_max":349900,"available":true,"price_varies":false,"compare_at_price":379500,"compare_at_price_min":379500,"compare_at_price_max":379500,"compare_at_price_varies":false,"variants":[{"id":37454769291444,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UMK-3DP-2PC-000-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Imprimante 3D à buse unique Ultimaker 2+ Connect","public_title":null,"options":["Default Title"],"price":349900,"weight":10300,"compare_at_price":379500,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"8719874982580","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-2-connect-single-nozzle-3d-printer-1_1400x_d7c6b7f2-c928-4149-9bc4-db3df053c724.jpg?v=1642543479","\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-2-connect-single-nozzle-3d-printer-2_1400x_f7ac0f6a-1eca-4dea-b811-33654af89638.jpg?v=1642543495","\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-2-connect-single-nozzle-3d-printer-3_1400x_0d028828-8bcf-4fba-bb04-7c03770e3faa.jpg?v=1642543502","\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-2-connect-single-nozzle-3d-printer-4_1400x_a103b472-6c5d-4c6c-8d77-b6c9d2c3fb19.jpg?v=1642543508"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-2-connect-single-nozzle-3d-printer-1_1400x_d7c6b7f2-c928-4149-9bc4-db3df053c724.jpg?v=1642543479","options":["Title"],"media":[{"alt":null,"id":29047560601836,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-2-connect-single-nozzle-3d-printer-1_1400x_d7c6b7f2-c928-4149-9bc4-db3df053c724.jpg?v=1642543479"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-2-connect-single-nozzle-3d-printer-1_1400x_d7c6b7f2-c928-4149-9bc4-db3df053c724.jpg?v=1642543479","width":1400},{"alt":null,"id":29047560896748,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-2-connect-single-nozzle-3d-printer-2_1400x_f7ac0f6a-1eca-4dea-b811-33654af89638.jpg?v=1642543495"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-2-connect-single-nozzle-3d-printer-2_1400x_f7ac0f6a-1eca-4dea-b811-33654af89638.jpg?v=1642543495","width":1400},{"alt":null,"id":29047561486572,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-2-connect-single-nozzle-3d-printer-3_1400x_0d028828-8bcf-4fba-bb04-7c03770e3faa.jpg?v=1642543502"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-2-connect-single-nozzle-3d-printer-3_1400x_0d028828-8bcf-4fba-bb04-7c03770e3faa.jpg?v=1642543502","width":1400},{"alt":null,"id":29047561715948,"position":4,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-2-connect-single-nozzle-3d-printer-4_1400x_a103b472-6c5d-4c6c-8d77-b6c9d2c3fb19.jpg?v=1642543508"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-2-connect-single-nozzle-3d-printer-4_1400x_a103b472-6c5d-4c6c-8d77-b6c9d2c3fb19.jpg?v=1642543508","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eLa dernière nouveauté de la gamme d'imprimantes\u0026nbsp;FFF d'Ultimaker, l'Ultimaker 2+ Connect. Une imprimante à buse unique avec des capacités de mise en réseau et un nouvel écran tactile, l'Ultimaker 2+ Connect est votre premier pas fiable dans notre monde d'impression 3D facile et accessible. Il suffit de déballer, de connecter trois composants et vous êtes prêt à commencer. Cette configuration rapide permet même d'installer plusieurs imprimantes 3D sans effort.\u003c\/p\u003e\r\n\u003cp\u003eL'Ultimaker 2+ Connect vous permet d'imprimer avec une large gamme de matériaux tel que le nylon, le PLA, l'ABS, le CPE et le TPU. L'imprimante est livrée avec une bobine de PLA Ultimaker Silver, 750g.\u003c\/p\u003e\r\n\u003cp\u003e\u0026nbsp;Caractéristiques principales\u0026nbsp;:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eConnection réseau\u0026nbsp;: Via Wi-Fi ou Ethernet, imprimez à distance sur le cloud avec une sécurité accrue\u003c\/li\u003e\r\n\u003cli\u003eComposants de nouvelle génération\u0026nbsp;: Une plateforme de construction plus rigide et des profils de matériaux rigoureusement testés qui garantissent une impression fiable\u003c\/li\u003e\r\n\u003cli\u003eÉcran tactile : Pour chaque action, l'écran tactile couleur de 2,4'' vous offre un contrôle intuitif et une assistance.\u003c\/li\u003e\r\n\u003cli\u003eReconnaissance des matériaux par NFC avec intégration complète du logiciel Cura\u003c\/li\u003e\r\n\u003cli\u003eSécurité renforcée : L'Ultimaker 2+ Connect Air élimine jusqu'à 95% des particules ultrafines et protège les utilisateurs des composants chauds (vendu séparément).\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eTout les nouveaux achats d'imprimantes Ultimaker sont accompagnés d'\u003ca href=\"https:\/\/ultimaker.com\/software\/ultimaker-essentials?utm_campaign=2021_Alwayson_srengineer_traffic_do_CA\u0026amp;utm_source=google\u0026amp;utm_medium=cpc\u0026amp;gclid=CjwKCAjw7--KBhAMEiwAxfpkWCfWmW8G3KtAbD3qNI3GZq6EZjy73myPZcE_fv71_U5JNUSS3xVVsRoCa1EQAvD_BwE\" style=\"background-color: rgb(255, 255, 255); outline: 0px;\"\u003eUltimaker Essentials\u003c\/a\u003e, un nouvel écosystème basé sur le cloud pour le partage et le stockage des fichiers du projet Cura et l'impression à distance de n'importe où.\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/ultimaker.com\/3d-printers\/ultimaker-s5\"\u003eSite internet du fabricant\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e3 heures de formation gratuite à\u0026nbsp;Voxel Factory.\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003ePrix groupés disponibles avec les accessoires Air Manager\/Door. Envoyez-nous un courriel pour une soumission !\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003ch5\u003eSpecs\u003c\/h5\u003e\r\n\u003ch3\u003eDimensions \u0026amp; Poids\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eDimensions extérieures\u0026nbsp;: 342 x 460 x 580 mm (13.5 x 18.1 x 22.8 pouces)\u003c\/li\u003e\r\n\u003cli\u003ePoids net\u0026nbsp;: 10.3 kg (22.7 lbs)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch3\u003eImpression\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eTechnologie : Fabrication de Filaments Fusionnés\u0026nbsp;(FFF)\u003c\/li\u003e\r\n\u003cli\u003eExtrusion unique avec buses interchangeables\u0026nbsp;\u003c\/li\u003e\u003cli\u003eDiamètre de la buse\u0026nbsp;: 0.4 mm (inclus)\u003cbr\u003e0.25, 0.6, 0.8 mm (vendus séparément)\u003c\/li\u003e\r\n\u003cli\u003eRésolution des couches\u0026nbsp;: Buse de\u0026nbsp;0.25 mm : 150 - 60 micron\u003cbr data-mce-fragment=\"1\"\u003e\u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; Buse de\u0026nbsp;0.4 mm : 200 - 20 micron\u003cbr data-mce-fragment=\"1\"\u003e\u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; Buse de\u0026nbsp;0.6 mm : 400 - 20 micron\u003cbr data-mce-fragment=\"1\"\u003e\u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; \u0026nbsp; Buse de\u0026nbsp;0.8 mm : 600 - 20 micron\u003c\/li\u003e\r\n\u003cli\u003eDimensions du boîtier\u0026nbsp;: 223 x 220 x 205 mm (8.7 x 8.6 x 8 pouces)\u003c\/li\u003e\r\n\u003cli\u003eDiamètre du filament : 2.85mm\u003c\/li\u003e\r\n\u003cli\u003eTempérature maximale de la buse\u0026nbsp;: 280°C\u003c\/li\u003e\r\n\u003cli\u003eLit chauffant : plaque de verre chauffée\u0026nbsp;(20 -\u0026nbsp;110°C)\u003c\/li\u003e\r\n\u003cli\u003eMise à niveau du lit : Mise à niveau manuelle\u003c\/li\u003e\u003cli\u003eBoîtier : The Ultimaker 2+ Connect Air\u003c\/li\u003e\u003cli\u003eManager (vendu séparément)\u003c\/li\u003e\r\n\u003cli\u003eInterface \u0026amp; Connectivité : écran tactile, USB, Wifi\u003c\/li\u003e\r\n\u003cli\u003eMoteurs d'axe\u0026nbsp;: moteurs pas à pas\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch5\u003eLogiciel\u003c\/h5\u003e\r\n\u003ch3\u003eDécoupage\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\u003ca title=\"Cura\" href=\"https:\/\/ultimaker.com\/en\/products\/cura-software\" target=\"_blank\"\u003eCura\u003c\/a\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch3\u003eContrôle\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\u003ca title=\"Ultimaker Cura at ultimaker.com\" href=\"https:\/\/ultimaker.com\/software\/ultimaker-cura\" target=\"_blank\"\u003eCura\u003c\/a\u003e\u003c\/li\u003e\r\n\u003cli\u003eCura Connect\u003c\/li\u003e\r\n\u003cli\u003eUltimaker Cloud\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch3\u003eTypes de fichiers\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eSTL, OBJ, AMF\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch5\u003eMatériaux\u003c\/h5\u003e\r\n\u003cul\u003e\r\n\u003cli\u003ePLA\u003c\/li\u003e\r\n\u003cli\u003eABS\u003c\/li\u003e\r\n\u003cli\u003eCPE \/ CPE+\u003c\/li\u003e\r\n\u003cli\u003ePC\u003c\/li\u003e\r\n\u003cli\u003eNylon\u003c\/li\u003e\r\n\u003cli\u003eTPU 95A\u003c\/li\u003e\r\n\u003cli\u003ePP\u003c\/li\u003e\r\n\u003cli\u003eMatériaux tiers.\u003c\/li\u003e\r\n\u003c\/ul\u003e"}

{"id":6060494946484,"title":"Ultimaker Air Manager for Ultimaker 2+ Connect","handle":"ultimaker-air-manager-for-ultimaker-2-connect","description":"\u003cp data-mce-fragment=\"1\"\u003eSitting atop your \u003ca href=\"https:\/\/voxelfactory.myshopify.com\/products\/ultimaker-2-connect-3d-printer?_pos=7\u0026amp;_sid=0c7b9f213\u0026amp;_ss=r\" title=\"Ultimaker S5 3D printer\"\u003eUltimaker 2+ Connect\u003c\/a\u003e 3D printer, the Air Manager provides a closed, inside-out airflow throughout the printing process. Thanks to its E10 filter, up to 95% of ultrafine particles created while printing are captured, resulting in a safer work environment.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThrough Cura and the Ultimaker 2+ Connect, the Air Manager smartly adjusts the airflow inside the printer, enabling optimal printing conditions for a wider range of materials that can otherwise be difficult to handle.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/voxelfactory.myshopify.com\/collections\/original-ultimaker-parts\/products\/replacement-filter-for-ultimaker-air-manager\" title=\"Replacement filter for Ultimaker Air Manager\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/voxelfactory.myshopify.com\/collections\/original-ultimaker-parts\/products\/replacement-filter-for-ultimaker-air-manager\" target=\"_blank\"\u003eReplacement filters\u003c\/a\u003e are available – we recommend changing the filter every 1500 print hours, or approximately 1 year.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eKey features :\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEPA filter\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eControlled extraction of air\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEnhanced safety : physical barrier against dust and wandering hands\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDetects material being used and adjusts airflow accordingly\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEasy to install, detected by the printer when connected\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSmart monitoring : tracks usage and prompts filter replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003eSpecs\u003c\/h5\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePhysical dimensions : 328 x 459 x 257 mm (12.9 x 18.1 x 10.1 in)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDimensions (including 2+ Connect) : 342 x 460 x 636 mm (13.5 x 18.1 x 25 in)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eNet weight : 2.65kg\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFilter technology : EPA E10 filter\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFan technology : low-noise brushless fan\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAir refresh rate : 1 - 50 m³\/h (35 m³\/h nominal rate for most materials at 23°C)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFilter replacement recommended every 1500 print hours (approx. 1 year)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOperating sound : less than 51 dBA (including Ultimaker 2+ Connect)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCompatible printer : \u003ca href=\"https:\/\/voxelfactory.myshopify.com\/products\/ultimaker-s5-dual-extruder-3d-printer\" title=\"Ultimaker S5\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/voxelfactory.myshopify.com\/products\/ultimaker-s5-dual-extruder-3d-printer\" target=\"_blank\"\u003eUltimaker 2+ Connect\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eData \/ power connection : UMB connection (included)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCompatible materials : Optimized for \u003ca href=\"https:\/\/voxelfactory.myshopify.com\/collections\/ultimaker-filaments\" title=\"Ultimaker filaments\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/voxelfactory.myshopify.com\/collections\/ultimaker-filaments\" target=\"_blank\"\u003eUltimaker materials\u003c\/a\u003e, 3rd party materials also supported.\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2020-11-10T04:00:01-05:00","created_at":"2020-11-06T18:48:27-05:00","vendor":"Ultimaker","type":"Ultimaker 3D printers","tags":["2+ connect","3Dprinters","add-on","enclosure","Ultimaker"],"price":64125,"price_min":64125,"price_max":64125,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37482026827956,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UMK-3PD-AIR-2PC-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ultimaker Air Manager for Ultimaker 2+ Connect","public_title":null,"options":["Default Title"],"price":64125,"weight":5000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"8719874982696","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-2-connect-3_1400x_a7651f90-468d-41e1-8112-e80bb4b34086.jpg?v=1641831770","\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-2-connect-1_1400x_0e971cf6-5147-4495-865b-01b14955f9bd.jpg?v=1641831770","\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-2-connect-4_1400x_jpg.jpg?v=1641831756","\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-2-connect-5_1400x_16505e04-406e-46b5-a1ca-6279de770acb.jpg?v=1641831762"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-2-connect-3_1400x_a7651f90-468d-41e1-8112-e80bb4b34086.jpg?v=1641831770","options":["Title"],"media":[{"alt":null,"id":29003234672876,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-2-connect-3_1400x_a7651f90-468d-41e1-8112-e80bb4b34086.jpg?v=1641831770"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-2-connect-3_1400x_a7651f90-468d-41e1-8112-e80bb4b34086.jpg?v=1641831770","width":1400},{"alt":null,"id":29003233722604,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-2-connect-1_1400x_0e971cf6-5147-4495-865b-01b14955f9bd.jpg?v=1641831770"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-2-connect-1_1400x_0e971cf6-5147-4495-865b-01b14955f9bd.jpg?v=1641831770","width":1400},{"alt":null,"id":29003235426540,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-2-connect-4_1400x_jpg.jpg?v=1641831756"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-2-connect-4_1400x_jpg.jpg?v=1641831756","width":1400},{"alt":null,"id":29003235852524,"position":4,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-2-connect-5_1400x_16505e04-406e-46b5-a1ca-6279de770acb.jpg?v=1641831762"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-2-connect-5_1400x_16505e04-406e-46b5-a1ca-6279de770acb.jpg?v=1641831762","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp data-mce-fragment=\"1\"\u003eSitting atop your \u003ca href=\"https:\/\/voxelfactory.myshopify.com\/products\/ultimaker-2-connect-3d-printer?_pos=7\u0026amp;_sid=0c7b9f213\u0026amp;_ss=r\" title=\"Ultimaker S5 3D printer\"\u003eUltimaker 2+ Connect\u003c\/a\u003e 3D printer, the Air Manager provides a closed, inside-out airflow throughout the printing process. Thanks to its E10 filter, up to 95% of ultrafine particles created while printing are captured, resulting in a safer work environment.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThrough Cura and the Ultimaker 2+ Connect, the Air Manager smartly adjusts the airflow inside the printer, enabling optimal printing conditions for a wider range of materials that can otherwise be difficult to handle.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/voxelfactory.myshopify.com\/collections\/original-ultimaker-parts\/products\/replacement-filter-for-ultimaker-air-manager\" title=\"Replacement filter for Ultimaker Air Manager\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/voxelfactory.myshopify.com\/collections\/original-ultimaker-parts\/products\/replacement-filter-for-ultimaker-air-manager\" target=\"_blank\"\u003eReplacement filters\u003c\/a\u003e are available – we recommend changing the filter every 1500 print hours, or approximately 1 year.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eKey features :\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEPA filter\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eControlled extraction of air\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEnhanced safety : physical barrier against dust and wandering hands\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDetects material being used and adjusts airflow accordingly\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEasy to install, detected by the printer when connected\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSmart monitoring : tracks usage and prompts filter replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003eSpecs\u003c\/h5\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePhysical dimensions : 328 x 459 x 257 mm (12.9 x 18.1 x 10.1 in)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDimensions (including 2+ Connect) : 342 x 460 x 636 mm (13.5 x 18.1 x 25 in)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eNet weight : 2.65kg\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFilter technology : EPA E10 filter\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFan technology : low-noise brushless fan\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAir refresh rate : 1 - 50 m³\/h (35 m³\/h nominal rate for most materials at 23°C)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFilter replacement recommended every 1500 print hours (approx. 1 year)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOperating sound : less than 51 dBA (including Ultimaker 2+ Connect)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCompatible printer : \u003ca href=\"https:\/\/voxelfactory.myshopify.com\/products\/ultimaker-s5-dual-extruder-3d-printer\" title=\"Ultimaker S5\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/voxelfactory.myshopify.com\/products\/ultimaker-s5-dual-extruder-3d-printer\" target=\"_blank\"\u003eUltimaker 2+ Connect\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eData \/ power connection : UMB connection (included)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCompatible materials : Optimized for \u003ca href=\"https:\/\/voxelfactory.myshopify.com\/collections\/ultimaker-filaments\" title=\"Ultimaker filaments\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/voxelfactory.myshopify.com\/collections\/ultimaker-filaments\" target=\"_blank\"\u003eUltimaker materials\u003c\/a\u003e, 3rd party materials also supported.\u003c\/li\u003e\n\u003c\/ul\u003e"}

{"id":7839025496300,"title":"Ultimaker PVA Removal Station","handle":"ultimaker-pva-station","description":"\u003cdiv align=\"justify\"\u003e\n\u003cp\u003eThe Ultimaker PVA Removal Station features a high-speed dissolving process driven by a magnetic rotor. Compared with motionless water in an improvised container, it removes PVA up to four times faster - even from hard-to-reach cavities in complex designs.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eSo you have parts ready as soon as possible.\u003c\/p\u003e\n\u003cp\u003eRotor-powered circulation: A magnetic rotor circulates water to reach all parts of your 3D print\u003c\/p\u003e\n\u003cp\u003eAdjustable rotor speed: Adjust for faster dissolving or to protect fragile parts\u003c\/p\u003e\n\u003cp\u003eKeeps prints secured: A rinsing basket keeps prints in place and submerged\u003c\/p\u003e\n\u003cp\u003eEasy to follow progress: A transparent, illuminated container makes it easy to know exactly when your part is ready\u003c\/p\u003e\n\u003cp\u003eLow maintenance: Ergonomically designed for easy cleaning\u003c\/p\u003e\n\u003cp\u003eNo chemicals needed: Just fill with regular tap water, which can be safely disposed of when finished\u003c\/p\u003e\n\u003cp\u003eClean and no-mess: Ergonomic design features help keep your workspace clean and tidy\u003c\/p\u003e\n\u003cp\u003eKey features :\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOptimized for PLA with PVA\u003c\/li\u003e\n\u003cli\u003eAlso works with PETG, Tough PLA, Nylon, CPE\u003c\/li\u003e\n\u003cli\u003eCompatible with any water soluble material\u003c\/li\u003e\n\u003cli\u003eSupported solvents: Water\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003ePhysical dimensions : 303 x 325 x 374 mm (7.8 x 9 x 6.4 in)\u003c\/li\u003e\n\u003cli\u003eWith handle extended : 528 mm \u003c\/li\u003e\n\u003cli\u003eContainer volume: 13.7L\/3.6 Gal\u003c\/li\u003e\n\u003cli\u003eWeight: 6.35 kg\u003c\/li\u003e\n\u003cli\u003eMaximum part size: XYZ - 200 x 230 x 165 mm\u003c\/li\u003e\n\u003cli\u003eRotational speed: 100 RPM (low) to 225 RMP (high)\u003c\/li\u003e\n\u003cli\u003eOperational sound \u0026gt;50 dBA\u003c\/li\u003e\n\u003cli\u003ePower input : 120 - 240 VAC\u003c\/li\u003e\n\u003cli\u003ePower output : 38 W\u003c\/li\u003e\n\u003cli\u003eFrequency: 50-60 Hz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/drive.google.com\/drive\/folders\/1IridfQnWV1O8cS_NLHRMuRcGcTw86fq3\" title=\"Technical Data Sheet\" target=\"_blank\"\u003eTechnical Data Sheet (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2023-05-04T08:43:29-04:00","created_at":"2022-12-02T17:24:18-05:00","vendor":"Ultimaker","type":"Ultimaker 3D printers","tags":["add-on","ultimaker"],"price":147825,"price_min":147825,"price_max":147825,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43539319881964,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UMK-3DP-PVA-REM-STN","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ultimaker PVA Removal Station","public_title":null,"options":["Default Title"],"price":147825,"weight":8500,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/Ultimaker_PVA_Removal_Station.webp?v=1683204975","\/\/www.voxelfactory.com\/cdn\/shop\/files\/Ultimaker_PVA_Removal_Station_Image_2.webp?v=1683204974"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Ultimaker_PVA_Removal_Station.webp?v=1683204975","options":["Title"],"media":[{"alt":null,"id":31591842414828,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Ultimaker_PVA_Removal_Station.webp?v=1683204975"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Ultimaker_PVA_Removal_Station.webp?v=1683204975","width":1400},{"alt":null,"id":31591842447596,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Ultimaker_PVA_Removal_Station_Image_2.webp?v=1683204974"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Ultimaker_PVA_Removal_Station_Image_2.webp?v=1683204974","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv align=\"justify\"\u003e\n\u003cp\u003eThe Ultimaker PVA Removal Station features a high-speed dissolving process driven by a magnetic rotor. Compared with motionless water in an improvised container, it removes PVA up to four times faster - even from hard-to-reach cavities in complex designs.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eSo you have parts ready as soon as possible.\u003c\/p\u003e\n\u003cp\u003eRotor-powered circulation: A magnetic rotor circulates water to reach all parts of your 3D print\u003c\/p\u003e\n\u003cp\u003eAdjustable rotor speed: Adjust for faster dissolving or to protect fragile parts\u003c\/p\u003e\n\u003cp\u003eKeeps prints secured: A rinsing basket keeps prints in place and submerged\u003c\/p\u003e\n\u003cp\u003eEasy to follow progress: A transparent, illuminated container makes it easy to know exactly when your part is ready\u003c\/p\u003e\n\u003cp\u003eLow maintenance: Ergonomically designed for easy cleaning\u003c\/p\u003e\n\u003cp\u003eNo chemicals needed: Just fill with regular tap water, which can be safely disposed of when finished\u003c\/p\u003e\n\u003cp\u003eClean and no-mess: Ergonomic design features help keep your workspace clean and tidy\u003c\/p\u003e\n\u003cp\u003eKey features :\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOptimized for PLA with PVA\u003c\/li\u003e\n\u003cli\u003eAlso works with PETG, Tough PLA, Nylon, CPE\u003c\/li\u003e\n\u003cli\u003eCompatible with any water soluble material\u003c\/li\u003e\n\u003cli\u003eSupported solvents: Water\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003ePhysical dimensions : 303 x 325 x 374 mm (7.8 x 9 x 6.4 in)\u003c\/li\u003e\n\u003cli\u003eWith handle extended : 528 mm \u003c\/li\u003e\n\u003cli\u003eContainer volume: 13.7L\/3.6 Gal\u003c\/li\u003e\n\u003cli\u003eWeight: 6.35 kg\u003c\/li\u003e\n\u003cli\u003eMaximum part size: XYZ - 200 x 230 x 165 mm\u003c\/li\u003e\n\u003cli\u003eRotational speed: 100 RPM (low) to 225 RMP (high)\u003c\/li\u003e\n\u003cli\u003eOperational sound \u0026gt;50 dBA\u003c\/li\u003e\n\u003cli\u003ePower input : 120 - 240 VAC\u003c\/li\u003e\n\u003cli\u003ePower output : 38 W\u003c\/li\u003e\n\u003cli\u003eFrequency: 50-60 Hz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/drive.google.com\/drive\/folders\/1IridfQnWV1O8cS_NLHRMuRcGcTw86fq3\" title=\"Technical Data Sheet\" target=\"_blank\"\u003eTechnical Data Sheet (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e"}

{"id":7674494714092,"title":"Ultimaker Metal Expansion Kit","handle":"metal-expansion-kit","description":"\u003cdiv align=\"justify\"\u003e\n\u003cp\u003eTake advantage of a new range of metal 3D printing applications by upgrading the Ultimaker S5 with the Metal Expansion Kit. Its seamless workflow makes creating stainless steel parts easier, more efficient, and affordable.\u003c\/p\u003e\n\u003cp\u003eHow it works\u003c\/p\u003e\n\u003cp\u003e1. Print with BASF Forward AM Ultrafuse® 17-4 PH stainless steel filament to create a “green part”\u003c\/p\u003e\n\u003cp\u003e2. Send your green part for post-processing by BASF’s network of certified debinding and sintering services\u003c\/p\u003e\n\u003cp\u003e3. Track debinding and sintering progress via an online portal, and receive your part back in 10 business days\u003c\/p\u003e\n\u003cp\u003e4. Put your finished metal part to use – from small series of tools to auxiliary components\u003c\/p\u003e\n\u003ch4\u003eWhy choose the Metal Expansion Kit?\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eAn end-to-end metal 3D printing workflow - \u003c\/strong\u003eThe Ultimaker Metal Expansion Kit provides access to software optimizations, post-processing services, and extensive e-learning modules.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesign and print high-quality steel parts\u003c\/strong\u003e - 17-4 PH stainless steel plus a metal-optimized support material2 offers the freedom to create strong parts with complex geometries.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMetal parts. Up to 90% cheaper\u003c\/strong\u003e - Comparing the Ultimaker S5 and Metal Expansion Kit to CNC and other additive methods, you can save up to 90% creating the metal tools and parts you need.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlastic or metal? You decide\u003c\/strong\u003e - 3D print either plastic or metal depending on your needs. Simply swap materials and change out the print cores, for more versatility and potential applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat’s included\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBASF Forward AM Ultrafuse® 17-4 PH filament (1 kg)\u003c\/li\u003e\n\u003cli\u003ePackaging for green parts and voucher for post-processing\u003c\/li\u003e\n\u003cli\u003eUltimaker Print Core CC 0.4\u003c\/li\u003e\n\u003cli\u003eMagigoo Pro Metal (50 ml) adhesive\u003c\/li\u003e\n\u003cli\u003eFree Ultimaker Cura software with optimized metal part slicing features\u003c\/li\u003e\n\u003cli\u003eAccess to exclusive metal FFF e-learning content on Ultimaker Academy \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003e**Please note that the use of the \u003ca title=\"Ultimaker Air Manager for Ultimaker S5\" href=\"https:\/\/www.voxelfactory.com\/collections\/ultimaker-3d-printers\/products\/ultimaker-air-manager-for-ultimaker-s5\" target=\"_blank\"\u003eAir Manager\u003c\/a\u003e is strongly recommended when printing with BASF Forward AM Ultrafuse® 17-4 PH material**\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv align=\"justify\"\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv align=\"justify\"\u003e\n\u003cstrong\u003e** Please note that the Metal Expansion Kit is not compatible with the Material Station, you will have to disconnect it and feed from the back while using the Metal Expansion Kit**\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan\u003e\u003cstrong\u003eCompatibili\u003c\/strong\u003ety\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003ca title=\"Ultimaker S5 Dual Extruder 3D Printer\" href=\"https:\/\/www.voxelfactory.com\/collections\/ultimaker-3d-printers\/products\/ultimaker-s5-dual-extruder-3d-printer\" target=\"_blank\"\u003e\u003cspan\u003eUltimaker S5 3D Printer\u003c\/span\u003e\u003c\/a\u003e with \u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/ultimaker-3d-printers\/products\/ultimaker-air-manager-for-ultimaker-s5\"\u003eUltimaker Air Manager\u003c\/a\u003e equipped. \u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eSoftware\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eUltimaker Cura Software\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2022-11-10T10:39:16-05:00","created_at":"2022-06-21T17:20:57-04:00","vendor":"Ultimaker","type":"Ultimaker Parts","tags":["magigoo","print core","s5","Ultimaker Air Manager","ultimaker s5"],"price":94365,"price_min":94365,"price_max":94365,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":42916772118764,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UMK-MTL-EXP-KIT-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ultimaker Metal Expansion Kit","public_title":null,"options":["Default Title"],"price":94365,"weight":2700,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/products\/Ultimaker_Metal_Expansion_Kit.webp?v=1668095651"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/Ultimaker_Metal_Expansion_Kit.webp?v=1668095651","options":["Title"],"media":[{"alt":null,"id":30774061760748,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/Ultimaker_Metal_Expansion_Kit.webp?v=1668095651"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/Ultimaker_Metal_Expansion_Kit.webp?v=1668095651","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv align=\"justify\"\u003e\n\u003cp\u003eTake advantage of a new range of metal 3D printing applications by upgrading the Ultimaker S5 with the Metal Expansion Kit. Its seamless workflow makes creating stainless steel parts easier, more efficient, and affordable.\u003c\/p\u003e\n\u003cp\u003eHow it works\u003c\/p\u003e\n\u003cp\u003e1. Print with BASF Forward AM Ultrafuse® 17-4 PH stainless steel filament to create a “green part”\u003c\/p\u003e\n\u003cp\u003e2. Send your green part for post-processing by BASF’s network of certified debinding and sintering services\u003c\/p\u003e\n\u003cp\u003e3. Track debinding and sintering progress via an online portal, and receive your part back in 10 business days\u003c\/p\u003e\n\u003cp\u003e4. Put your finished metal part to use – from small series of tools to auxiliary components\u003c\/p\u003e\n\u003ch4\u003eWhy choose the Metal Expansion Kit?\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eAn end-to-end metal 3D printing workflow - \u003c\/strong\u003eThe Ultimaker Metal Expansion Kit provides access to software optimizations, post-processing services, and extensive e-learning modules.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesign and print high-quality steel parts\u003c\/strong\u003e - 17-4 PH stainless steel plus a metal-optimized support material2 offers the freedom to create strong parts with complex geometries.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMetal parts. Up to 90% cheaper\u003c\/strong\u003e - Comparing the Ultimaker S5 and Metal Expansion Kit to CNC and other additive methods, you can save up to 90% creating the metal tools and parts you need.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlastic or metal? You decide\u003c\/strong\u003e - 3D print either plastic or metal depending on your needs. Simply swap materials and change out the print cores, for more versatility and potential applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat’s included\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBASF Forward AM Ultrafuse® 17-4 PH filament (1 kg)\u003c\/li\u003e\n\u003cli\u003ePackaging for green parts and voucher for post-processing\u003c\/li\u003e\n\u003cli\u003eUltimaker Print Core CC 0.4\u003c\/li\u003e\n\u003cli\u003eMagigoo Pro Metal (50 ml) adhesive\u003c\/li\u003e\n\u003cli\u003eFree Ultimaker Cura software with optimized metal part slicing features\u003c\/li\u003e\n\u003cli\u003eAccess to exclusive metal FFF e-learning content on Ultimaker Academy \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003e**Please note that the use of the \u003ca title=\"Ultimaker Air Manager for Ultimaker S5\" href=\"https:\/\/www.voxelfactory.com\/collections\/ultimaker-3d-printers\/products\/ultimaker-air-manager-for-ultimaker-s5\" target=\"_blank\"\u003eAir Manager\u003c\/a\u003e is strongly recommended when printing with BASF Forward AM Ultrafuse® 17-4 PH material**\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv align=\"justify\"\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv align=\"justify\"\u003e\n\u003cstrong\u003e** Please note that the Metal Expansion Kit is not compatible with the Material Station, you will have to disconnect it and feed from the back while using the Metal Expansion Kit**\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan\u003e\u003cstrong\u003eCompatibili\u003c\/strong\u003ety\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003ca title=\"Ultimaker S5 Dual Extruder 3D Printer\" href=\"https:\/\/www.voxelfactory.com\/collections\/ultimaker-3d-printers\/products\/ultimaker-s5-dual-extruder-3d-printer\" target=\"_blank\"\u003e\u003cspan\u003eUltimaker S5 3D Printer\u003c\/span\u003e\u003c\/a\u003e with \u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/ultimaker-3d-printers\/products\/ultimaker-air-manager-for-ultimaker-s5\"\u003eUltimaker Air Manager\u003c\/a\u003e equipped. \u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eSoftware\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eUltimaker Cura Software\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e"}