Enceinte ventilée Ultimaker S5 Air Manager

{"id":3956271153270,"title":"Station de gestion de matériaux Ultimaker S5","handle":"material-handling-station-for-ultimaker-s5","description":"\u003cp\u003eFaites encore plus avec\u0026nbsp;votre\u0026nbsp;\u003ca href=\"\/products\/ultimaker-s5-dual-extruder-3d-printer\" target=\"_blank\" title=\"Ultimaker S5 3D printer\" rel=\"noopener noreferrer\"\u003eUltimaker S5\u003c\/a\u003e grâce à\u0026nbsp;la station de gestion de matériaux. Vous pouvez installer jusqu'à 6 bobines de filament dans l'enceinte fermée à humidité contrôlée. La station se synchronise avec\u0026nbsp;Cura et votre imprimante pour permettre de changer de bobine en cours d'impression, pour des impressions longues, sans interruption et sans souci.\u003c\/p\u003e\r\n\u003cp\u003ePrincipales caractéristiques\u0026nbsp;:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eChargement facile : chargez jusqu'à 6 bobines par l'avant de la machine.\u003c\/li\u003e\r\n\u003cli\u003eImpression continue : changement automatique de bobine lorsqu'une est vide.\u003c\/li\u003e\r\n\u003cli\u003eContrôle de l'humidité : avec la\u0026nbsp;gestion intelligente de l'atmosphère interne\u0026nbsp;et un dessicant auto-régénérateur, votre filament est conservé dans un environnement optimal.\u003c\/li\u003e\r\n\u003cli\u003eFacile à installer et à contrôler\u0026nbsp;: reconnaissance des \u003ca href=\"\/collections\/ultimaker-filaments\" target=\"_blank\" title=\"Ultimaker filaments\" rel=\"noopener noreferrer\"\u003ematériaux Ultimaker\u003c\/a\u003e par puce NFC, intégration complète à Cura\u003c\/li\u003e\r\n\u003cli\u003eCompatible avec les matériaux composites (fibre de carbone ou de verre)\u003c\/li\u003e\r\n\u003cli\u003eCompatible avec les\u0026nbsp;\u003ca href=\"\/collections\/ultimaker-filaments\" target=\"_blank\"\u003ematériaux\u0026nbsp;Ultimaker\u003c\/a\u003e et de tiers partis\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch5\u003eSpécifications\u003c\/h5\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eDimensions physiques :\u0026nbsp;491 x 438 x 400 mm (19.3 x 17.2 x 15.7 po)\u003c\/li\u003e\r\n\u003cli\u003ePoids net: 17.7kg\u003c\/li\u003e\r\n\u003cli\u003eDiamètre du filament: 2.85mm\u003c\/li\u003e\r\n\u003cli\u003eDimensions des bobines:\u003c\/li\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eLargeur: 50 - 70 mm (2 - 2.7 po)\u003c\/li\u003e\r\n\u003cli\u003eDiamètre: 197 - 203 mm (7.8 - 8 po)\u003c\/li\u003e\r\n\u003cli\u003eDiamètre de l'ouverture: \u0026gt; 98 mm (3.8 po)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cli\u003eCapacité : 6 bobines\u003c\/li\u003e\r\n\u003cli\u003eReconnaissance des matériaux : reconnaissance automatique avec lecteur NFC\u003c\/li\u003e\r\n\u003cli\u003eType d'extrudeur : double engrenage, résistant à l'abrasion\u003c\/li\u003e\r\n\u003cli\u003eConnection données: UMB (inclus)\u003c\/li\u003e\r\n\u003cli\u003eCourant entrant : 85 - 264V AC, max 125W\u003c\/li\u003e\r\n\u003cli\u003eCourant sortant : max 10A (pour Ultimaker S5)\u003c\/li\u003e\r\n\u003cli\u003eImprimante 3D compatible : \u003ca href=\"\/products\/ultimaker-s5-dual-extruder-3d-printer\" target=\"_blank\" title=\"Ultimaker S5 3D printer\" rel=\"noopener noreferrer\"\u003eUltimaker S5\u003c\/a\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003eIntégration logicielle\u0026nbsp;: Ultimaker Cura, Ultimaker Connect, Ultimaker Cloud\u003c\/li\u003e\r\n\u003c\/ul\u003e","published_at":"2019-09-24T07:55:51-04:00","created_at":"2019-08-29T14:03:21-04:00","vendor":"Ultimaker","type":"Ultimaker 3D printers","tags":["add-on","s5","ultimaker","ultimaker s5"],"price":455900,"price_min":455900,"price_max":455900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29505191444598,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UMK-3DP-MHS-US5-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Station de gestion de matériaux Ultimaker S5","public_title":null,"options":["Default Title"],"price":455900,"weight":20000,"compare_at_price":null,"inventory_quantity":4,"inventory_management":"shopify","inventory_policy":"continue","barcode":"8719874980999","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-3d-printers-material-handling-station-for-ultimaker-s5-1_1400x_1400x_431d32db-3731-4dbf-ba6d-0b24845ca763.jpg?v=1642542970","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-3d-printers-material-handling-station-for-ultimaker-s5-2_1400x_1400x_dbde428d-b1d9-4ee5-9e6c-65d662d8c3f2.jpg?v=1642542977","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-3d-printers-material-handling-station-for-ultimaker-s5-3_1400x_1400x_20441de0-c187-44f6-bd26-753c92210700.jpg?v=1642542985"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-3d-printers-material-handling-station-for-ultimaker-s5-1_1400x_1400x_431d32db-3731-4dbf-ba6d-0b24845ca763.jpg?v=1642542970","options":["Title"],"media":[{"alt":null,"id":29047547035884,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-3d-printers-material-handling-station-for-ultimaker-s5-1_1400x_1400x_431d32db-3731-4dbf-ba6d-0b24845ca763.jpg?v=1642542970"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-3d-printers-material-handling-station-for-ultimaker-s5-1_1400x_1400x_431d32db-3731-4dbf-ba6d-0b24845ca763.jpg?v=1642542970","width":1400},{"alt":null,"id":29047547265260,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-3d-printers-material-handling-station-for-ultimaker-s5-2_1400x_1400x_dbde428d-b1d9-4ee5-9e6c-65d662d8c3f2.jpg?v=1642542977"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-3d-printers-material-handling-station-for-ultimaker-s5-2_1400x_1400x_dbde428d-b1d9-4ee5-9e6c-65d662d8c3f2.jpg?v=1642542977","width":1400},{"alt":null,"id":29047547363564,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-3d-printers-material-handling-station-for-ultimaker-s5-3_1400x_1400x_20441de0-c187-44f6-bd26-753c92210700.jpg?v=1642542985"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-3d-printers-material-handling-station-for-ultimaker-s5-3_1400x_1400x_20441de0-c187-44f6-bd26-753c92210700.jpg?v=1642542985","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eFaites encore plus avec\u0026nbsp;votre\u0026nbsp;\u003ca href=\"\/products\/ultimaker-s5-dual-extruder-3d-printer\" target=\"_blank\" title=\"Ultimaker S5 3D printer\" rel=\"noopener noreferrer\"\u003eUltimaker S5\u003c\/a\u003e grâce à\u0026nbsp;la station de gestion de matériaux. Vous pouvez installer jusqu'à 6 bobines de filament dans l'enceinte fermée à humidité contrôlée. La station se synchronise avec\u0026nbsp;Cura et votre imprimante pour permettre de changer de bobine en cours d'impression, pour des impressions longues, sans interruption et sans souci.\u003c\/p\u003e\r\n\u003cp\u003ePrincipales caractéristiques\u0026nbsp;:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eChargement facile : chargez jusqu'à 6 bobines par l'avant de la machine.\u003c\/li\u003e\r\n\u003cli\u003eImpression continue : changement automatique de bobine lorsqu'une est vide.\u003c\/li\u003e\r\n\u003cli\u003eContrôle de l'humidité : avec la\u0026nbsp;gestion intelligente de l'atmosphère interne\u0026nbsp;et un dessicant auto-régénérateur, votre filament est conservé dans un environnement optimal.\u003c\/li\u003e\r\n\u003cli\u003eFacile à installer et à contrôler\u0026nbsp;: reconnaissance des \u003ca href=\"\/collections\/ultimaker-filaments\" target=\"_blank\" title=\"Ultimaker filaments\" rel=\"noopener noreferrer\"\u003ematériaux Ultimaker\u003c\/a\u003e par puce NFC, intégration complète à Cura\u003c\/li\u003e\r\n\u003cli\u003eCompatible avec les matériaux composites (fibre de carbone ou de verre)\u003c\/li\u003e\r\n\u003cli\u003eCompatible avec les\u0026nbsp;\u003ca href=\"\/collections\/ultimaker-filaments\" target=\"_blank\"\u003ematériaux\u0026nbsp;Ultimaker\u003c\/a\u003e et de tiers partis\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch5\u003eSpécifications\u003c\/h5\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eDimensions physiques :\u0026nbsp;491 x 438 x 400 mm (19.3 x 17.2 x 15.7 po)\u003c\/li\u003e\r\n\u003cli\u003ePoids net: 17.7kg\u003c\/li\u003e\r\n\u003cli\u003eDiamètre du filament: 2.85mm\u003c\/li\u003e\r\n\u003cli\u003eDimensions des bobines:\u003c\/li\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eLargeur: 50 - 70 mm (2 - 2.7 po)\u003c\/li\u003e\r\n\u003cli\u003eDiamètre: 197 - 203 mm (7.8 - 8 po)\u003c\/li\u003e\r\n\u003cli\u003eDiamètre de l'ouverture: \u0026gt; 98 mm (3.8 po)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cli\u003eCapacité : 6 bobines\u003c\/li\u003e\r\n\u003cli\u003eReconnaissance des matériaux : reconnaissance automatique avec lecteur NFC\u003c\/li\u003e\r\n\u003cli\u003eType d'extrudeur : double engrenage, résistant à l'abrasion\u003c\/li\u003e\r\n\u003cli\u003eConnection données: UMB (inclus)\u003c\/li\u003e\r\n\u003cli\u003eCourant entrant : 85 - 264V AC, max 125W\u003c\/li\u003e\r\n\u003cli\u003eCourant sortant : max 10A (pour Ultimaker S5)\u003c\/li\u003e\r\n\u003cli\u003eImprimante 3D compatible : \u003ca href=\"\/products\/ultimaker-s5-dual-extruder-3d-printer\" target=\"_blank\" title=\"Ultimaker S5 3D printer\" rel=\"noopener noreferrer\"\u003eUltimaker S5\u003c\/a\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003eIntégration logicielle\u0026nbsp;: Ultimaker Cura, Ultimaker Connect, Ultimaker Cloud\u003c\/li\u003e\r\n\u003c\/ul\u003e"}

{"id":4520271315062,"title":"Polymaker PolyBox Edition II","handle":"polymaker-polybox","description":"\u003cp\u003eThe PolyBox by Polymaker is a dry storage box designed to provide a dry environment for 3D printing filaments. It can be used to store spools (2x 1kg spools or 1x 3kg spool) while printing, and is compatible with most 3D printers.\u003c\/p\u003e\n\u003cp\u003eIt includes a battery-powered thermo-hygrometer and two bags of silica dessicant (100g each).\u003c\/p\u003e","published_at":"2020-07-08T13:52:35-04:00","created_at":"2020-06-02T16:56:19-04:00","vendor":"Polymaker","type":"Other Machines","tags":["1.75mm","2.85mm","Hardware"],"price":8999,"price_min":8999,"price_max":8999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31823693217910,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PMK-HDW-PBX-000-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Polymaker PolyBox Edition II","public_title":null,"options":["Default Title"],"price":8999,"weight":2500,"compare_at_price":null,"inventory_quantity":34,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6938936701804","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/other-machines-polymaker-polybox-edition-ii-1_1400x_3b28bb1e-5eea-4d7e-94a0-19a82b74b936.jpg?v=1642026925","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/other-machines-polymaker-polybox-edition-ii-2_1400x_d0ef1150-a66c-4b35-82e9-127392275e48.jpg?v=1642026930"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/other-machines-polymaker-polybox-edition-ii-1_1400x_3b28bb1e-5eea-4d7e-94a0-19a82b74b936.jpg?v=1642026925","options":["Title"],"media":[{"alt":null,"id":29011785351404,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/other-machines-polymaker-polybox-edition-ii-1_1400x_3b28bb1e-5eea-4d7e-94a0-19a82b74b936.jpg?v=1642026925"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/other-machines-polymaker-polybox-edition-ii-1_1400x_3b28bb1e-5eea-4d7e-94a0-19a82b74b936.jpg?v=1642026925","width":1400},{"alt":null,"id":29011785384172,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/other-machines-polymaker-polybox-edition-ii-2_1400x_d0ef1150-a66c-4b35-82e9-127392275e48.jpg?v=1642026930"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/other-machines-polymaker-polybox-edition-ii-2_1400x_d0ef1150-a66c-4b35-82e9-127392275e48.jpg?v=1642026930","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThe PolyBox by Polymaker is a dry storage box designed to provide a dry environment for 3D printing filaments. It can be used to store spools (2x 1kg spools or 1x 3kg spool) while printing, and is compatible with most 3D printers.\u003c\/p\u003e\n\u003cp\u003eIt includes a battery-powered thermo-hygrometer and two bags of silica dessicant (100g each).\u003c\/p\u003e"}

{"id":4520264106102,"title":"Polymaker Polysher","handle":"polymaker-polysher","description":"\u003cp\u003eThe Polysher by Polymaker is a desktop post processing unit for 3D printed parts made of PolySmooth or PolyCast materials. The Polysher creates a fine mist of alcohol which smooths the model to make the layers disappear while retaining its dimensions.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eIf needed, the \u003ca href=\"https:\/\/sj0nyv5muwrfan2y-1511735.shopifypreview.com\/products\/polymaker-nebulizer?_pos=1\u0026amp;_sid=5587af2bd\u0026amp;_ss=r\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eNebulizer\u003c\/a\u003e, core part of the Polysher™ that creates the fine mist of alcohol is available for sale separetely.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eMaximum part size : 150mm diameter, 180mm height\u003c\/p\u003e\n\u003cp\u003ePolishing liquid (not included) : alcohol (\u0026gt;70%) (\u003ca href=\"\/products\/isopropyl-alcohol-99-4l\" title=\"IPA 99%\" target=\"_blank\"\u003eIPA \u003c\/a\u003eor ethanol)\u003c\/p\u003e","published_at":"2020-07-08T14:37:06-04:00","created_at":"2020-06-02T16:42:32-04:00","vendor":"Polymaker","type":"Polymaker Accessories","tags":["smooth"],"price":38199,"price_min":38199,"price_max":38199,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31823604351094,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PMK-HDW-PSH-000-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Polymaker Polysher","public_title":null,"options":["Default Title"],"price":38199,"weight":7000,"compare_at_price":null,"inventory_quantity":35,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6938936701798","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/other-machines-polymaker-polysher-1_1400x_0c8daeee-080d-4a31-918c-08bab97db40e.jpg?v=1642026974"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/other-machines-polymaker-polysher-1_1400x_0c8daeee-080d-4a31-918c-08bab97db40e.jpg?v=1642026974","options":["Title"],"media":[{"alt":null,"id":29011788136684,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/other-machines-polymaker-polysher-1_1400x_0c8daeee-080d-4a31-918c-08bab97db40e.jpg?v=1642026974"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/other-machines-polymaker-polysher-1_1400x_0c8daeee-080d-4a31-918c-08bab97db40e.jpg?v=1642026974","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThe Polysher by Polymaker is a desktop post processing unit for 3D printed parts made of PolySmooth or PolyCast materials. The Polysher creates a fine mist of alcohol which smooths the model to make the layers disappear while retaining its dimensions.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eIf needed, the \u003ca href=\"https:\/\/sj0nyv5muwrfan2y-1511735.shopifypreview.com\/products\/polymaker-nebulizer?_pos=1\u0026amp;_sid=5587af2bd\u0026amp;_ss=r\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eNebulizer\u003c\/a\u003e, core part of the Polysher™ that creates the fine mist of alcohol is available for sale separetely.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eMaximum part size : 150mm diameter, 180mm height\u003c\/p\u003e\n\u003cp\u003ePolishing liquid (not included) : alcohol (\u0026gt;70%) (\u003ca href=\"\/products\/isopropyl-alcohol-99-4l\" title=\"IPA 99%\" target=\"_blank\"\u003eIPA \u003c\/a\u003eor ethanol)\u003c\/p\u003e"}

{"id":6115263840436,"title":"Polymaker Polysher Nebulizer","handle":"polymaker-nebulizer","description":"The nebulizer is the core of the \u003ca href=\"https:\/\/sj0nyv5muwrfan2y-1511735.shopifypreview.com\/collections\/fdm-3d-printer-add-ons\/products\/polymaker-polysher\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePolysher\u003c\/a\u003e™, it creates the fine mist of alcohol which evenly smooth the PolySmooth™ model.\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003eCompatible Material: PolySmooth™, PolyCast™\u003c\/p\u003e\n\u003cp\u003ePolishing Liquid: Alcohol (\u0026gt;70%) (IPA, Ethanol)\u003c\/p\u003e\n\u003cp\u003ePolishing Time: 20-40 min typical (varies based on part size, alcohol concentration and ambient temp.)\u003c\/p\u003e\n\u003cp\u003eOperating Temperature: 15 – 32 °C (59 – 90 °F)\u003c\/p\u003e\n\u003cp\u003eStorage Temperature: 0 – 38 °C (32 – 100 °F)\u003c\/p\u003e\n\u003cp\u003eOperation manual: \u003ca href=\"https:\/\/polymaker.com\/Downloads\/Operation-Manuals\/Nebulizer-Operation-Manual.pdf\"\u003eDownload\u003c\/a\u003e\u003c\/p\u003e","published_at":"2021-01-14T19:45:45-05:00","created_at":"2020-12-10T18:29:17-05:00","vendor":"Polymaker","type":"Polymaker Accessories","tags":["refill","smooth"],"price":2599,"price_min":2599,"price_max":2599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37694013505716,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PMK-HDW-PSH-NBL-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Polymaker Polysher Nebulizer","public_title":null,"options":["Default Title"],"price":2599,"weight":200,"compare_at_price":null,"inventory_quantity":26,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6938936708018","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/polymaker-accessories-polymaker-polysher-nebulizer-1_1400x_78e8d622-14e3-4a9e-80b2-3ab0b91df5a8.jpg?v=1641591860"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/polymaker-accessories-polymaker-polysher-nebulizer-1_1400x_78e8d622-14e3-4a9e-80b2-3ab0b91df5a8.jpg?v=1641591860","options":["Title"],"media":[{"alt":null,"id":28991846645996,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/polymaker-accessories-polymaker-polysher-nebulizer-1_1400x_78e8d622-14e3-4a9e-80b2-3ab0b91df5a8.jpg?v=1641591860"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/polymaker-accessories-polymaker-polysher-nebulizer-1_1400x_78e8d622-14e3-4a9e-80b2-3ab0b91df5a8.jpg?v=1641591860","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"The nebulizer is the core of the \u003ca href=\"https:\/\/sj0nyv5muwrfan2y-1511735.shopifypreview.com\/collections\/fdm-3d-printer-add-ons\/products\/polymaker-polysher\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePolysher\u003c\/a\u003e™, it creates the fine mist of alcohol which evenly smooth the PolySmooth™ model.\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003eCompatible Material: PolySmooth™, PolyCast™\u003c\/p\u003e\n\u003cp\u003ePolishing Liquid: Alcohol (\u0026gt;70%) (IPA, Ethanol)\u003c\/p\u003e\n\u003cp\u003ePolishing Time: 20-40 min typical (varies based on part size, alcohol concentration and ambient temp.)\u003c\/p\u003e\n\u003cp\u003eOperating Temperature: 15 – 32 °C (59 – 90 °F)\u003c\/p\u003e\n\u003cp\u003eStorage Temperature: 0 – 38 °C (32 – 100 °F)\u003c\/p\u003e\n\u003cp\u003eOperation manual: \u003ca href=\"https:\/\/polymaker.com\/Downloads\/Operation-Manuals\/Nebulizer-Operation-Manual.pdf\"\u003eDownload\u003c\/a\u003e\u003c\/p\u003e"}

{"id":3951527460982,"title":"Kit de mise à niveau MMU2S pour imprimante MK3","handle":"prusa-mmu2s-upgrade-kit-for-mk3-printer","description":"\u003cp\u003eCe kit de mise à niveau vous permet l'impression multi-matériaux sur votre\u0026nbsp;\u003ca href=\"\/products\/original-reprap-prusa-i3-mk3s-diy-kit\" target=\"_blank\"\u003eimprimante 3D Prusa originale\u003c\/a\u003e. Vous pouvez imprimer jusqu'à 5 filaments en une même impression. Grâce à son système d'entraînement direct, le chargement du filament dans la tête chauffante est maintenant plus robuste et moins susceptible aux blocages.\u003c\/p\u003e\r\n\u003cp\u003eIl s'agit d'un kit, vous devrez donc en faire l'assemblage vous-même! Consultez le\u0026nbsp;\u003ca href=\"https:\/\/manual.prusa3d.com\/c\/Mise_%C3%A0_niveau_de_l%27Original_Prusa_i3_MK3S_vers_la_MMU2S\" title=\"MMU2S assembly guides at prusa3d.com\" target=\"_blank\"\u003eguide d'assemblage\u003c\/a\u003e pour plus d'information.\u003c\/p\u003e\r\n\u003ch5\u003eCompatibilité\u003c\/h5\u003e\r\n\u003cp\u003eCe kit est compatible avec les imprimantes suivantes\u0026nbsp;:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eOriginal Prusa i3 MK3 et\u0026nbsp;\u003ca href=\"\/products\/original-reprap-prusa-i3-mk3s-diy-kit\"\u003eMK3S\u003c\/a\u003e\u003c\/li\u003e\r\n\u003cli\u003eOriginal Prusa i3 MK2.5 et MK2.5S\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eLe MMU2S permet d'imprimer ces filaments :\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\u003ca href=\"\/collections\/materio3d-pla-1-75mm-filament\" target=\"_blank\" title=\"Materio3D 1.75mm PLA Filament at voxelfactory.com\" rel=\"noopener noreferrer\"\u003ePLA\u003c\/a\u003e\u003c\/li\u003e\r\n\u003cli\u003eABS\u003c\/li\u003e\r\n\u003cli\u003ePETG\u003c\/li\u003e\r\n\u003cli\u003eMatériaux solubles (BVOH, PVA)\u003c\/li\u003e\r\n\u003c\/ul\u003e","published_at":"2019-08-30T12:43:48-04:00","created_at":"2019-08-20T14:52:39-04:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":["mk2.5","mk3","MK3S","mmu","prusa"],"price":39900,"price_min":39900,"price_max":39900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29486568210550,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-UPG-MMU-02S-MK3","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Kit de mise à niveau MMU2S pour imprimante MK3","public_title":null,"options":["Default Title"],"price":39900,"weight":4000,"compare_at_price":null,"inventory_quantity":21,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/prusa-research-parts-prusa-mmu2s-upgrade-kit-for-mk3-printer-1_1400x_1400x_91951e33-0886-4c79-9175-e47bedc5abb3.jpg?v=1642113195","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/prusa-research-parts-prusa-mmu2s-upgrade-kit-for-mk3-printer-1_1400x-2_1400x_21f2c23c-5fc7-4685-856f-89614ef2432b.jpg?v=1642113201"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/prusa-research-parts-prusa-mmu2s-upgrade-kit-for-mk3-printer-1_1400x_1400x_91951e33-0886-4c79-9175-e47bedc5abb3.jpg?v=1642113195","options":["Title"],"media":[{"alt":null,"id":29017312493804,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/prusa-research-parts-prusa-mmu2s-upgrade-kit-for-mk3-printer-1_1400x_1400x_91951e33-0886-4c79-9175-e47bedc5abb3.jpg?v=1642113195"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/prusa-research-parts-prusa-mmu2s-upgrade-kit-for-mk3-printer-1_1400x_1400x_91951e33-0886-4c79-9175-e47bedc5abb3.jpg?v=1642113195","width":1400},{"alt":null,"id":29017312821484,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/prusa-research-parts-prusa-mmu2s-upgrade-kit-for-mk3-printer-1_1400x-2_1400x_21f2c23c-5fc7-4685-856f-89614ef2432b.jpg?v=1642113201"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/prusa-research-parts-prusa-mmu2s-upgrade-kit-for-mk3-printer-1_1400x-2_1400x_21f2c23c-5fc7-4685-856f-89614ef2432b.jpg?v=1642113201","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eCe kit de mise à niveau vous permet l'impression multi-matériaux sur votre\u0026nbsp;\u003ca href=\"\/products\/original-reprap-prusa-i3-mk3s-diy-kit\" target=\"_blank\"\u003eimprimante 3D Prusa originale\u003c\/a\u003e. Vous pouvez imprimer jusqu'à 5 filaments en une même impression. Grâce à son système d'entraînement direct, le chargement du filament dans la tête chauffante est maintenant plus robuste et moins susceptible aux blocages.\u003c\/p\u003e\r\n\u003cp\u003eIl s'agit d'un kit, vous devrez donc en faire l'assemblage vous-même! Consultez le\u0026nbsp;\u003ca href=\"https:\/\/manual.prusa3d.com\/c\/Mise_%C3%A0_niveau_de_l%27Original_Prusa_i3_MK3S_vers_la_MMU2S\" title=\"MMU2S assembly guides at prusa3d.com\" target=\"_blank\"\u003eguide d'assemblage\u003c\/a\u003e pour plus d'information.\u003c\/p\u003e\r\n\u003ch5\u003eCompatibilité\u003c\/h5\u003e\r\n\u003cp\u003eCe kit est compatible avec les imprimantes suivantes\u0026nbsp;:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eOriginal Prusa i3 MK3 et\u0026nbsp;\u003ca href=\"\/products\/original-reprap-prusa-i3-mk3s-diy-kit\"\u003eMK3S\u003c\/a\u003e\u003c\/li\u003e\r\n\u003cli\u003eOriginal Prusa i3 MK2.5 et MK2.5S\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eLe MMU2S permet d'imprimer ces filaments :\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\u003ca href=\"\/collections\/materio3d-pla-1-75mm-filament\" target=\"_blank\" title=\"Materio3D 1.75mm PLA Filament at voxelfactory.com\" rel=\"noopener noreferrer\"\u003ePLA\u003c\/a\u003e\u003c\/li\u003e\r\n\u003cli\u003eABS\u003c\/li\u003e\r\n\u003cli\u003ePETG\u003c\/li\u003e\r\n\u003cli\u003eMatériaux solubles (BVOH, PVA)\u003c\/li\u003e\r\n\u003c\/ul\u003e"}

{"id":4374720708726,"title":"Enceinte Ultimaker 2+ Extended par Printed Solid","handle":"ultimaker-2-extended-enclosure-kit-by-printed-solid","description":"\u003cp\u003eFermez votre \u003ca href=\"\/collections\/ultimaker-3d-printers\" target=\"_blank\"\u003eimprimante 3D Ultimaker\u003c\/a\u003e grâce à cette enceinte pour vous aider à réguler la température de l'air dans l'imprimante et empêcher les mains baladeuses d'y entrer.\u003c\/p\u003e\u003cp\u003eFabriquée aux États-Unis par Printed Solid, cette enceinte est faite de panneaux d'acrylique taillés avec précision. Assemblage requis.\u003c\/p\u003e\u003cp\u003eComprend :\u003c\/p\u003e\u003cul\u003e\u003cli\u003ePanneaux découpés au laser (porte, enceinte du dessus)\u003c\/li\u003e\u003cli\u003eCharnière pré-montées\u003c\/li\u003e\u003cli\u003eVis d'assemblage\u003c\/li\u003e\u003cli\u003eFeuillet d'instructions\u003c\/li\u003e\u003c\/ul\u003e","published_at":"2019-12-17T15:05:15-05:00","created_at":"2019-12-17T15:05:15-05:00","vendor":"Printed Solid","type":"Open Parts","tags":["Ultimaker"],"price":19900,"price_min":19900,"price_max":19900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31322080280694,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PSD-ENC-UM2-XTD-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Enceinte Ultimaker 2+ Extended par Printed Solid","public_title":null,"options":["Default Title"],"price":19900,"weight":5000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-ultimaker-2-extended-enclosure-kit-by-printed-solid-1_1400x_7e3a658e-6fca-463a-b8c9-c38dff2bfa7a.jpg?v=1641842677","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-ultimaker-2-extended-enclosure-kit-by-printed-solid-2_1400x_3e8c42eb-bd4f-49f8-8707-a4ed74106f0a.jpg?v=1641842684","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-ultimaker-2-extended-enclosure-kit-by-printed-solid-3_1400x_f2ad3b46-dee8-47a0-bab7-eb86d1010d4e.jpg?v=1641842691"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-ultimaker-2-extended-enclosure-kit-by-printed-solid-1_1400x_7e3a658e-6fca-463a-b8c9-c38dff2bfa7a.jpg?v=1641842677","options":["Title"],"media":[{"alt":null,"id":29003758108908,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-ultimaker-2-extended-enclosure-kit-by-printed-solid-1_1400x_7e3a658e-6fca-463a-b8c9-c38dff2bfa7a.jpg?v=1641842677"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-ultimaker-2-extended-enclosure-kit-by-printed-solid-1_1400x_7e3a658e-6fca-463a-b8c9-c38dff2bfa7a.jpg?v=1641842677","width":1400},{"alt":null,"id":29003758338284,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-ultimaker-2-extended-enclosure-kit-by-printed-solid-2_1400x_3e8c42eb-bd4f-49f8-8707-a4ed74106f0a.jpg?v=1641842684"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-ultimaker-2-extended-enclosure-kit-by-printed-solid-2_1400x_3e8c42eb-bd4f-49f8-8707-a4ed74106f0a.jpg?v=1641842684","width":1400},{"alt":null,"id":29003758502124,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-ultimaker-2-extended-enclosure-kit-by-printed-solid-3_1400x_f2ad3b46-dee8-47a0-bab7-eb86d1010d4e.jpg?v=1641842691"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-ultimaker-2-extended-enclosure-kit-by-printed-solid-3_1400x_f2ad3b46-dee8-47a0-bab7-eb86d1010d4e.jpg?v=1641842691","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eFermez votre \u003ca href=\"\/collections\/ultimaker-3d-printers\" target=\"_blank\"\u003eimprimante 3D Ultimaker\u003c\/a\u003e grâce à cette enceinte pour vous aider à réguler la température de l'air dans l'imprimante et empêcher les mains baladeuses d'y entrer.\u003c\/p\u003e\u003cp\u003eFabriquée aux États-Unis par Printed Solid, cette enceinte est faite de panneaux d'acrylique taillés avec précision. Assemblage requis.\u003c\/p\u003e\u003cp\u003eComprend :\u003c\/p\u003e\u003cul\u003e\u003cli\u003ePanneaux découpés au laser (porte, enceinte du dessus)\u003c\/li\u003e\u003cli\u003eCharnière pré-montées\u003c\/li\u003e\u003cli\u003eVis d'assemblage\u003c\/li\u003e\u003cli\u003eFeuillet d'instructions\u003c\/li\u003e\u003c\/ul\u003e"}

{"id":4374721331318,"title":"Enceinte Ultimaker S3 par Printed Solid","handle":"ultimaker-s3-enclosure-kit-by-printed-solid","description":"\u003cp\u003eFermez votre \u003ca href=\"\/collections\/ultimaker-3d-printers\" target=\"_blank\"\u003eimprimante 3D Ultimaker\u003c\/a\u003e grâce à cette enceinte pour vous aider à réguler la température de l'air dans l'imprimante et empêcher les mains baladeuses d'y entrer.\u003c\/p\u003e\u003cp\u003eFabriquée aux États-Unis par Printed Solid, cette enceinte est faite de panneaux d'acrylique taillés avec précision. Assemblage requis.\u003c\/p\u003e\u003cp\u003eComprend :\u003c\/p\u003e\u003cul\u003e\u003cli\u003ePanneaux découpés au laser (porte, enceinte du dessus)\u003c\/li\u003e\u003cli\u003eCharnière pré-montées\u003c\/li\u003e\u003cli\u003eVis d'assemblage\u003c\/li\u003e\u003cli\u003eFeuillet d'instructions\u003c\/li\u003e\u003c\/ul\u003e","published_at":"2019-12-17T15:07:25-05:00","created_at":"2019-12-17T15:07:25-05:00","vendor":"Printed Solid","type":"Open Parts","tags":["Ultimaker"],"price":21900,"price_min":21900,"price_max":21900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31322082377846,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PSD-ENC-US3-000-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Enceinte Ultimaker S3 par Printed Solid","public_title":null,"options":["Default Title"],"price":21900,"weight":5000,"compare_at_price":null,"inventory_quantity":6,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/Ultimaker-S3-EnclosureKit-PrintedSolid-A_1400x_9f032b05-f427-4426-b169-e12022d9c845.jpg?v=1641831891","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/Ultimaker-S3-EnclosureKit-PrintedSolid-B_1400x_dd7eb0f9-b8c2-4d64-b61f-a82633b923ad.jpg?v=1641831896"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/Ultimaker-S3-EnclosureKit-PrintedSolid-A_1400x_9f032b05-f427-4426-b169-e12022d9c845.jpg?v=1641831891","options":["Title"],"media":[{"alt":null,"id":29003244470508,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/Ultimaker-S3-EnclosureKit-PrintedSolid-A_1400x_9f032b05-f427-4426-b169-e12022d9c845.jpg?v=1641831891"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/Ultimaker-S3-EnclosureKit-PrintedSolid-A_1400x_9f032b05-f427-4426-b169-e12022d9c845.jpg?v=1641831891","width":1400},{"alt":null,"id":29003244798188,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/Ultimaker-S3-EnclosureKit-PrintedSolid-B_1400x_dd7eb0f9-b8c2-4d64-b61f-a82633b923ad.jpg?v=1641831896"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/Ultimaker-S3-EnclosureKit-PrintedSolid-B_1400x_dd7eb0f9-b8c2-4d64-b61f-a82633b923ad.jpg?v=1641831896","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eFermez votre \u003ca href=\"\/collections\/ultimaker-3d-printers\" target=\"_blank\"\u003eimprimante 3D Ultimaker\u003c\/a\u003e grâce à cette enceinte pour vous aider à réguler la température de l'air dans l'imprimante et empêcher les mains baladeuses d'y entrer.\u003c\/p\u003e\u003cp\u003eFabriquée aux États-Unis par Printed Solid, cette enceinte est faite de panneaux d'acrylique taillés avec précision. Assemblage requis.\u003c\/p\u003e\u003cp\u003eComprend :\u003c\/p\u003e\u003cul\u003e\u003cli\u003ePanneaux découpés au laser (porte, enceinte du dessus)\u003c\/li\u003e\u003cli\u003eCharnière pré-montées\u003c\/li\u003e\u003cli\u003eVis d'assemblage\u003c\/li\u003e\u003cli\u003eFeuillet d'instructions\u003c\/li\u003e\u003c\/ul\u003e"}

{"id":6060494946484,"title":"Ultimaker Air Manager for Ultimaker 2+ Connect","handle":"ultimaker-air-manager-for-ultimaker-2-connect","description":"\u003cp data-mce-fragment=\"1\"\u003eSitting atop your \u003ca href=\"https:\/\/voxelfactory.myshopify.com\/products\/ultimaker-2-connect-3d-printer?_pos=7\u0026amp;_sid=0c7b9f213\u0026amp;_ss=r\" title=\"Ultimaker S5 3D printer\"\u003eUltimaker 2+ Connect\u003c\/a\u003e 3D printer, the Air Manager provides a closed, inside-out airflow throughout the printing process. Thanks to its E10 filter, up to 95% of ultrafine particles created while printing are captured, resulting in a safer work environment.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThrough Cura and the Ultimaker 2+ Connect, the Air Manager smartly adjusts the airflow inside the printer, enabling optimal printing conditions for a wider range of materials that can otherwise be difficult to handle.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/voxelfactory.myshopify.com\/collections\/original-ultimaker-parts\/products\/replacement-filter-for-ultimaker-air-manager\" title=\"Replacement filter for Ultimaker Air Manager\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/voxelfactory.myshopify.com\/collections\/original-ultimaker-parts\/products\/replacement-filter-for-ultimaker-air-manager\" target=\"_blank\"\u003eReplacement filters\u003c\/a\u003e are available – we recommend changing the filter every 1500 print hours, or approximately 1 year.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eKey features :\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEPA filter\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eControlled extraction of air\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEnhanced safety : physical barrier against dust and wandering hands\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDetects material being used and adjusts airflow accordingly\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEasy to install, detected by the printer when connected\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSmart monitoring : tracks usage and prompts filter replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003eSpecs\u003c\/h5\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePhysical dimensions : 328 x 459 x 257 mm (12.9 x 18.1 x 10.1 in)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDimensions (including 2+ Connect) : 342 x 460 x 636 mm (13.5 x 18.1 x 25 in)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eNet weight : 2.65kg\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFilter technology : EPA E10 filter\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFan technology : low-noise brushless fan\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAir refresh rate : 1 - 50 m³\/h (35 m³\/h nominal rate for most materials at 23°C)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFilter replacement recommended every 1500 print hours (approx. 1 year)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOperating sound : less than 51 dBA (including Ultimaker 2+ Connect)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCompatible printer : \u003ca href=\"https:\/\/voxelfactory.myshopify.com\/products\/ultimaker-s5-dual-extruder-3d-printer\" title=\"Ultimaker S5\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/voxelfactory.myshopify.com\/products\/ultimaker-s5-dual-extruder-3d-printer\" target=\"_blank\"\u003eUltimaker 2+ Connect\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eData \/ power connection : UMB connection (included)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCompatible materials : Optimized for \u003ca href=\"https:\/\/voxelfactory.myshopify.com\/collections\/ultimaker-filaments\" title=\"Ultimaker filaments\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/voxelfactory.myshopify.com\/collections\/ultimaker-filaments\" target=\"_blank\"\u003eUltimaker materials\u003c\/a\u003e, 3rd party materials also supported.\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2020-11-10T04:00:01-05:00","created_at":"2020-11-06T18:48:27-05:00","vendor":"Ultimaker","type":"Ultimaker 3D printers","tags":["2+ connect","3Dprinters","add-on","enclosure","Ultimaker"],"price":61000,"price_min":61000,"price_max":61000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37482026827956,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UMK-3PD-AIR-2PC-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ultimaker Air Manager for Ultimaker 2+ Connect","public_title":null,"options":["Default Title"],"price":61000,"weight":0,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"continue","barcode":"8719874982696","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-2-connect-3_1400x_a7651f90-468d-41e1-8112-e80bb4b34086.jpg?v=1641831770","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-2-connect-1_1400x_0e971cf6-5147-4495-865b-01b14955f9bd.jpg?v=1641831770","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-2-connect-4_1400x_jpg.jpg?v=1641831756","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-2-connect-5_1400x_16505e04-406e-46b5-a1ca-6279de770acb.jpg?v=1641831762"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-2-connect-3_1400x_a7651f90-468d-41e1-8112-e80bb4b34086.jpg?v=1641831770","options":["Title"],"media":[{"alt":null,"id":29003234672876,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-2-connect-3_1400x_a7651f90-468d-41e1-8112-e80bb4b34086.jpg?v=1641831770"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-2-connect-3_1400x_a7651f90-468d-41e1-8112-e80bb4b34086.jpg?v=1641831770","width":1400},{"alt":null,"id":29003233722604,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-2-connect-1_1400x_0e971cf6-5147-4495-865b-01b14955f9bd.jpg?v=1641831770"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-2-connect-1_1400x_0e971cf6-5147-4495-865b-01b14955f9bd.jpg?v=1641831770","width":1400},{"alt":null,"id":29003235426540,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-2-connect-4_1400x_jpg.jpg?v=1641831756"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-2-connect-4_1400x_jpg.jpg?v=1641831756","width":1400},{"alt":null,"id":29003235852524,"position":4,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-2-connect-5_1400x_16505e04-406e-46b5-a1ca-6279de770acb.jpg?v=1641831762"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/ultimaker-3d-printers-ultimaker-air-manager-for-ultimaker-2-connect-5_1400x_16505e04-406e-46b5-a1ca-6279de770acb.jpg?v=1641831762","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp data-mce-fragment=\"1\"\u003eSitting atop your \u003ca href=\"https:\/\/voxelfactory.myshopify.com\/products\/ultimaker-2-connect-3d-printer?_pos=7\u0026amp;_sid=0c7b9f213\u0026amp;_ss=r\" title=\"Ultimaker S5 3D printer\"\u003eUltimaker 2+ Connect\u003c\/a\u003e 3D printer, the Air Manager provides a closed, inside-out airflow throughout the printing process. Thanks to its E10 filter, up to 95% of ultrafine particles created while printing are captured, resulting in a safer work environment.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThrough Cura and the Ultimaker 2+ Connect, the Air Manager smartly adjusts the airflow inside the printer, enabling optimal printing conditions for a wider range of materials that can otherwise be difficult to handle.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/voxelfactory.myshopify.com\/collections\/original-ultimaker-parts\/products\/replacement-filter-for-ultimaker-air-manager\" title=\"Replacement filter for Ultimaker Air Manager\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/voxelfactory.myshopify.com\/collections\/original-ultimaker-parts\/products\/replacement-filter-for-ultimaker-air-manager\" target=\"_blank\"\u003eReplacement filters\u003c\/a\u003e are available – we recommend changing the filter every 1500 print hours, or approximately 1 year.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eKey features :\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEPA filter\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eControlled extraction of air\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEnhanced safety : physical barrier against dust and wandering hands\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDetects material being used and adjusts airflow accordingly\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEasy to install, detected by the printer when connected\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSmart monitoring : tracks usage and prompts filter replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003eSpecs\u003c\/h5\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePhysical dimensions : 328 x 459 x 257 mm (12.9 x 18.1 x 10.1 in)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDimensions (including 2+ Connect) : 342 x 460 x 636 mm (13.5 x 18.1 x 25 in)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eNet weight : 2.65kg\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFilter technology : EPA E10 filter\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFan technology : low-noise brushless fan\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAir refresh rate : 1 - 50 m³\/h (35 m³\/h nominal rate for most materials at 23°C)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFilter replacement recommended every 1500 print hours (approx. 1 year)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOperating sound : less than 51 dBA (including Ultimaker 2+ Connect)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCompatible printer : \u003ca href=\"https:\/\/voxelfactory.myshopify.com\/products\/ultimaker-s5-dual-extruder-3d-printer\" title=\"Ultimaker S5\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/voxelfactory.myshopify.com\/products\/ultimaker-s5-dual-extruder-3d-printer\" target=\"_blank\"\u003eUltimaker 2+ Connect\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eData \/ power connection : UMB connection (included)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCompatible materials : Optimized for \u003ca href=\"https:\/\/voxelfactory.myshopify.com\/collections\/ultimaker-filaments\" title=\"Ultimaker filaments\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/voxelfactory.myshopify.com\/collections\/ultimaker-filaments\" target=\"_blank\"\u003eUltimaker materials\u003c\/a\u003e, 3rd party materials also supported.\u003c\/li\u003e\n\u003c\/ul\u003e"}

{"id":6539248795828,"title":"PrintDry Filament Dryer Pro","handle":"printdry-filament-dryer-pro","description":"\u003cp\u003eThe ultimate filament dryer you need for quality 3D printing!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDigital display\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt in timer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eTwo spool capacity,(up to 200mm or 8\" OD) vertically mounted with the option to hold up to a single large 2kg-5kg spool of material(up to 300mm or 12\"OD).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eAn option to feed material directly from the Printdry to your printer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eSpool Adapter included with the following parts:\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e2x metal shafts\u003c\/li\u003e\n\u003cli\u003e4x big spool adapters\u003c\/li\u003e\n\u003cli\u003e4x small spool adapters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with 1.75 and 2.85mm filament sizes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\n\u003ch5\u003eTechnical Specs\u003c\/h5\u003e\n\u003cp\u003eDimensions: 340mm (L) x 285mm (W) x 350mm (H)\u003c\/p\u003e\n\u003cp\u003eWeight: 4.0 kg\u003c\/p\u003e\n\u003cp\u003eDrying temperature: 5 adjustable temperature presets: 35ºC, 45ºC, 55ºC, 65ºC, and 75ºC\u003c\/p\u003e\n\u003cp\u003eDrying time: Built in digital timer with maximum of 48 hours with and auto off\u003c\/p\u003e","published_at":"2021-04-13T11:56:13-04:00","created_at":"2021-02-26T19:39:49-05:00","vendor":"PrintDry","type":"Filament Dryer","tags":["Hardware","PrintDry"],"price":22500,"price_min":22500,"price_max":22500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39263723356340,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRT-DRY-FIL-PRO-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"PrintDry Filament Dryer Pro","public_title":null,"options":["Default Title"],"price":22500,"weight":4000,"compare_at_price":null,"inventory_quantity":19,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/PrintDry_dryer_2sws_1400x_4ce8418d-67e9-4354-80f2-ba77e91f01bf.jpg?v=1641831530","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/PrintDry_dryer_2ws_1400x_3dfecead-a524-4540-a9c0-9810f2f68b9d.jpg?v=1641831530","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/LSK2003-PRO_1400x_18ea6544-756f-4e0d-8088-16803d4e03a7.jpg?v=1641831561","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/Spool-Adapters_1400x_f21cb926-1641-4080-bc8c-886424ee9943.jpg?v=1641831581"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/PrintDry_dryer_2sws_1400x_4ce8418d-67e9-4354-80f2-ba77e91f01bf.jpg?v=1641831530","options":["Title"],"media":[{"alt":null,"id":29003217731820,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/PrintDry_dryer_2sws_1400x_4ce8418d-67e9-4354-80f2-ba77e91f01bf.jpg?v=1641831530"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/PrintDry_dryer_2sws_1400x_4ce8418d-67e9-4354-80f2-ba77e91f01bf.jpg?v=1641831530","width":1400},{"alt":null,"id":29003216617708,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/PrintDry_dryer_2ws_1400x_3dfecead-a524-4540-a9c0-9810f2f68b9d.jpg?v=1641831530"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/PrintDry_dryer_2ws_1400x_3dfecead-a524-4540-a9c0-9810f2f68b9d.jpg?v=1641831530","width":1400},{"alt":null,"id":29003220975852,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/LSK2003-PRO_1400x_18ea6544-756f-4e0d-8088-16803d4e03a7.jpg?v=1641831561"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/LSK2003-PRO_1400x_18ea6544-756f-4e0d-8088-16803d4e03a7.jpg?v=1641831561","width":1400},{"alt":null,"id":29003223236844,"position":4,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/Spool-Adapters_1400x_f21cb926-1641-4080-bc8c-886424ee9943.jpg?v=1641831581"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/Spool-Adapters_1400x_f21cb926-1641-4080-bc8c-886424ee9943.jpg?v=1641831581","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThe ultimate filament dryer you need for quality 3D printing!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDigital display\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt in timer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eTwo spool capacity,(up to 200mm or 8\" OD) vertically mounted with the option to hold up to a single large 2kg-5kg spool of material(up to 300mm or 12\"OD).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eAn option to feed material directly from the Printdry to your printer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eSpool Adapter included with the following parts:\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e2x metal shafts\u003c\/li\u003e\n\u003cli\u003e4x big spool adapters\u003c\/li\u003e\n\u003cli\u003e4x small spool adapters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with 1.75 and 2.85mm filament sizes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\n\u003ch5\u003eTechnical Specs\u003c\/h5\u003e\n\u003cp\u003eDimensions: 340mm (L) x 285mm (W) x 350mm (H)\u003c\/p\u003e\n\u003cp\u003eWeight: 4.0 kg\u003c\/p\u003e\n\u003cp\u003eDrying temperature: 5 adjustable temperature presets: 35ºC, 45ºC, 55ºC, 65ºC, and 75ºC\u003c\/p\u003e\n\u003cp\u003eDrying time: Built in digital timer with maximum of 48 hours with and auto off\u003c\/p\u003e"}

{"id":6539285823668,"title":"PrintDry Vacuum Container: Package of 5","handle":"printdry-vacuum-container","description":"\u003cp data-mce-fragment=\"1\"\u003eThe ultimate filament storage solution for 3D printing filaments to prevent the filament from absorbing moisture.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIncludes: 5-pack with a vacuum pump\u003c\/p\u003e","published_at":"2021-04-13T11:57:27-04:00","created_at":"2021-02-26T20:06:12-05:00","vendor":"PrintDry","type":"printdry Vacuum","tags":["PrintDry"],"price":9995,"price_min":9995,"price_max":9995,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39263849676980,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRT-DRY-VAC-5PC-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"PrintDry Vacuum Container: Package of 5","public_title":null,"options":["Default Title"],"price":9995,"weight":4000,"compare_at_price":null,"inventory_quantity":34,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/Sinterit-PrintDry-04_1400x_6827ef4f-6308-4171-ba90-db39453bed34.jpg?v=1642017356","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/Sinterit-PrintDry-01_1400x_d57c0204-7473-4e45-81aa-eafbc30c7bf5.jpg?v=1642017356","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/Sinterit-PrintDry-06_1400x_57186a31-778a-4336-ad03-a1e2cc7de3e4.jpg?v=1642017356","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/Sinterit-PrintDry-03_1400x_1fe3ff25-1e0c-4025-92f7-c858d6cae76d.jpg?v=1642017356"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/Sinterit-PrintDry-04_1400x_6827ef4f-6308-4171-ba90-db39453bed34.jpg?v=1642017356","options":["Title"],"media":[{"alt":null,"id":29011223970028,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/Sinterit-PrintDry-04_1400x_6827ef4f-6308-4171-ba90-db39453bed34.jpg?v=1642017356"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/Sinterit-PrintDry-04_1400x_6827ef4f-6308-4171-ba90-db39453bed34.jpg?v=1642017356","width":1400},{"alt":null,"id":29011222921452,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/Sinterit-PrintDry-01_1400x_d57c0204-7473-4e45-81aa-eafbc30c7bf5.jpg?v=1642017356"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/Sinterit-PrintDry-01_1400x_d57c0204-7473-4e45-81aa-eafbc30c7bf5.jpg?v=1642017356","width":1400},{"alt":null,"id":29011224396012,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/Sinterit-PrintDry-06_1400x_57186a31-778a-4336-ad03-a1e2cc7de3e4.jpg?v=1642017356"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/Sinterit-PrintDry-06_1400x_57186a31-778a-4336-ad03-a1e2cc7de3e4.jpg?v=1642017356","width":1400},{"alt":null,"id":29011223642348,"position":4,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/Sinterit-PrintDry-03_1400x_1fe3ff25-1e0c-4025-92f7-c858d6cae76d.jpg?v=1642017356"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/Sinterit-PrintDry-03_1400x_1fe3ff25-1e0c-4025-92f7-c858d6cae76d.jpg?v=1642017356","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp data-mce-fragment=\"1\"\u003eThe ultimate filament storage solution for 3D printing filaments to prevent the filament from absorbing moisture.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIncludes: 5-pack with a vacuum pump\u003c\/p\u003e"}

{"id":6629097078964,"title":"PrintDry Large Spool Kit for Print Dry PRO","handle":"printdry-large-spool-kit-for-print-dry-pro","description":"\u003cp\u003eLarge Spool kit (double-wall) for Print Dry Filament Dryer Pro\u003c\/p\u003e\n\u003cp\u003eWith a large spool kit, the dryer can be used to dry and feed up to 5Kg filament spool with max 300mm or 12” spool outside diameter.\u003c\/p\u003e\n\u003cdiv class=\"woocommerce-product-details__short-description\"\u003e\n\u003cp\u003eDouble-wall chamber\u003c\/p\u003e\n\u003cp\u003eUsed \u003cstrong\u003eONLY\u003c\/strong\u003e with the PRO model of PrintDry Filament Dryer.\u003c\/p\u003e\n\u003cp\u003eTo dry and feed up to 5Kg filament spool with max 300mm or 12” spool outside diameter.\u003c\/p\u003e\n\u003cp\u003ePackage includes:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003ePlastic tray x1\u003c\/li\u003e\n\u003cli\u003eLong metal shaft x1\u003c\/li\u003e\n\u003cli\u003eCenter supporting base x1\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/div\u003e","published_at":"2021-04-27T18:36:36-04:00","created_at":"2021-04-27T18:12:47-04:00","vendor":"PrintDry","type":"Filament Dryer","tags":["PrintDry"],"price":4100,"price_min":4100,"price_max":4100,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39679018762420,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRT-DRY-LRG-SPL-KIT","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"PrintDry Large Spool Kit for Print Dry PRO","public_title":null,"options":["Default Title"],"price":4100,"weight":2000,"compare_at_price":null,"inventory_quantity":34,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/LSK2003-PRO_1400x_6f14ec0d-e788-4bad-bc62-7fdd462d3a39.jpg?v=1641591657"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/LSK2003-PRO_1400x_6f14ec0d-e788-4bad-bc62-7fdd462d3a39.jpg?v=1641591657","options":["Title"],"media":[{"alt":null,"id":28991833080044,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/LSK2003-PRO_1400x_6f14ec0d-e788-4bad-bc62-7fdd462d3a39.jpg?v=1641591657"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/LSK2003-PRO_1400x_6f14ec0d-e788-4bad-bc62-7fdd462d3a39.jpg?v=1641591657","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eLarge Spool kit (double-wall) for Print Dry Filament Dryer Pro\u003c\/p\u003e\n\u003cp\u003eWith a large spool kit, the dryer can be used to dry and feed up to 5Kg filament spool with max 300mm or 12” spool outside diameter.\u003c\/p\u003e\n\u003cdiv class=\"woocommerce-product-details__short-description\"\u003e\n\u003cp\u003eDouble-wall chamber\u003c\/p\u003e\n\u003cp\u003eUsed \u003cstrong\u003eONLY\u003c\/strong\u003e with the PRO model of PrintDry Filament Dryer.\u003c\/p\u003e\n\u003cp\u003eTo dry and feed up to 5Kg filament spool with max 300mm or 12” spool outside diameter.\u003c\/p\u003e\n\u003cp\u003ePackage includes:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003ePlastic tray x1\u003c\/li\u003e\n\u003cli\u003eLong metal shaft x1\u003c\/li\u003e\n\u003cli\u003eCenter supporting base x1\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/div\u003e"}

{"id":7429079630060,"title":"PrintDry Smart Vacuum Filament Container","handle":"printdry-smart-vacuum-filament-container","description":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\" class=\"bold\"\u003ePrintDry\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e is proud to announce our newest filament storage solution — a SMART solution!  With a built-in vacuum pump and a rechargeable battery, this filament container can be vacuum sealed by pushing ONE button.  No more manual pumps. More importantly, we also integrated a re-sealing sensor inside, which constantly monitors the vacuum level and will automatically activate the vacuum pump once the vacuum level drops.   This prevents leakage over an extended period of time. \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003cspan data-mce-fragment=\"1\" class=\"bold\"\u003eStore your filament easily\u003c\/span\u003e \u003cspan data-mce-fragment=\"1\" class=\"bold\"\u003ewithout\u003c\/span\u003e \u003cspan data-mce-fragment=\"1\" class=\"bold\"\u003eworrying about leaks.\u003c\/span\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003eUSB Power Adapter not included - Includes USB cable for charging\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003eProduct details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOne-Touch sealing\u003c\/li\u003e\n\u003cli\u003eHolds up to 3 Spools\u003c\/li\u003e\n\u003cli\u003eRechargeable Battery\u003c\/li\u003e\n\u003cli\u003eAutomatic Resealing\u003c\/li\u003e\n\u003cli\u003eLED Indicator\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003c\/h5\u003e\n\u003ch5\u003e\u003c\/h5\u003e\n\u003ch5\u003eTechnical Specs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003e Power:\u003c\/strong\u003e 5V DC(Power Adapter not included)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e Diameter: 225mm, Height: 300mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 1kg\u003c\/p\u003e","published_at":"2021-11-23T19:24:58-05:00","created_at":"2021-11-01T18:11:39-04:00","vendor":"PrintDry","type":"Filament container","tags":["1.75mm","2.85mm","PrintDry"],"price":13900,"price_min":13900,"price_max":13900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41971873579244,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRT-DRY-VAC-SMT-BAT-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"PrintDry Smart Vacuum Filament Container","public_title":null,"options":["Default Title"],"price":13900,"weight":1500,"compare_at_price":null,"inventory_quantity":41,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/PrintDry-SmartVacuum-Office1_1400x_49c54c6b-f045-4560-b020-081ebc62dedc.jpg?v=1642090232","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/PrintDry-SmartVacuum_1400x_e6536e22-f194-48d5-a259-4de0b7cae907.jpg?v=1642090975","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/PrintDry-SmartVacuum-OneTouchSealing_1400x_aa0f4264-eeea-44d7-bd20-8da570995330.jpg?v=1642090975","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/PrintDry-SmartVacuum-ChargingCable_1400x_2ae14603-9adf-4894-8972-ea9e5729bf5f.jpg?v=1642090975","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/PrintDry-SmartVacuum-4features_tech_1400x_e3e85a70-eb8c-47c9-925d-0e742647e49a.jpg?v=1642090975"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/PrintDry-SmartVacuum-Office1_1400x_49c54c6b-f045-4560-b020-081ebc62dedc.jpg?v=1642090232","options":["Title"],"media":[{"alt":null,"id":29016573509868,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/PrintDry-SmartVacuum-Office1_1400x_49c54c6b-f045-4560-b020-081ebc62dedc.jpg?v=1642090232"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/PrintDry-SmartVacuum-Office1_1400x_49c54c6b-f045-4560-b020-081ebc62dedc.jpg?v=1642090232","width":1400},{"alt":null,"id":29016605884652,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/PrintDry-SmartVacuum_1400x_e6536e22-f194-48d5-a259-4de0b7cae907.jpg?v=1642090975"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/PrintDry-SmartVacuum_1400x_e6536e22-f194-48d5-a259-4de0b7cae907.jpg?v=1642090975","width":1400},{"alt":null,"id":29016573903084,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/PrintDry-SmartVacuum-OneTouchSealing_1400x_aa0f4264-eeea-44d7-bd20-8da570995330.jpg?v=1642090975"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/PrintDry-SmartVacuum-OneTouchSealing_1400x_aa0f4264-eeea-44d7-bd20-8da570995330.jpg?v=1642090975","width":1400},{"alt":null,"id":29016572985580,"position":4,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/PrintDry-SmartVacuum-ChargingCable_1400x_2ae14603-9adf-4894-8972-ea9e5729bf5f.jpg?v=1642090975"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/PrintDry-SmartVacuum-ChargingCable_1400x_2ae14603-9adf-4894-8972-ea9e5729bf5f.jpg?v=1642090975","width":1400},{"alt":null,"id":29016572526828,"position":5,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/PrintDry-SmartVacuum-4features_tech_1400x_e3e85a70-eb8c-47c9-925d-0e742647e49a.jpg?v=1642090975"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/PrintDry-SmartVacuum-4features_tech_1400x_e3e85a70-eb8c-47c9-925d-0e742647e49a.jpg?v=1642090975","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\" class=\"bold\"\u003ePrintDry\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e is proud to announce our newest filament storage solution — a SMART solution!  With a built-in vacuum pump and a rechargeable battery, this filament container can be vacuum sealed by pushing ONE button.  No more manual pumps. More importantly, we also integrated a re-sealing sensor inside, which constantly monitors the vacuum level and will automatically activate the vacuum pump once the vacuum level drops.   This prevents leakage over an extended period of time. \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e \u003cspan data-mce-fragment=\"1\" class=\"bold\"\u003eStore your filament easily\u003c\/span\u003e \u003cspan data-mce-fragment=\"1\" class=\"bold\"\u003ewithout\u003c\/span\u003e \u003cspan data-mce-fragment=\"1\" class=\"bold\"\u003eworrying about leaks.\u003c\/span\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003eUSB Power Adapter not included - Includes USB cable for charging\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003eProduct details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOne-Touch sealing\u003c\/li\u003e\n\u003cli\u003eHolds up to 3 Spools\u003c\/li\u003e\n\u003cli\u003eRechargeable Battery\u003c\/li\u003e\n\u003cli\u003eAutomatic Resealing\u003c\/li\u003e\n\u003cli\u003eLED Indicator\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003c\/h5\u003e\n\u003ch5\u003e\u003c\/h5\u003e\n\u003ch5\u003eTechnical Specs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003e Power:\u003c\/strong\u003e 5V DC(Power Adapter not included)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e Diameter: 225mm, Height: 300mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 1kg\u003c\/p\u003e"}