Products
Brass Nozzle 0.25mm for E3D V6 Hotend
Stock :
Montréal : Calculating...
Vancouver : Calculating...

Brass Nozzle 0.25mm for E3D V6 Hotend
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$14.99
0.25mm brass nozzle for E3D v6 hotends. Specs Material : Brass Opening diameter : 0.25mm Filament diameter : 1.75mm Thread : M6
Brass Nozzle 0.40mm for E3D V6 Hot End
Stock :
Montréal : Calculating...
Vancouver : Calculating...

Brass Nozzle 0.40mm for E3D V6 Hot End
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$9.99
0.40mm brass nozzle for E3D v6 hotends. Specs Material : Brass Opening diameter : 0.40mm Filament diameter : 1.75mm Thread : M6
Brass Nozzle 0.60mm for E3D V6 Hotend
Stock :
Montréal : Calculating...
Vancouver : Calculating...

Brass Nozzle 0.60mm for E3D V6 Hotend
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$9.99
0.60mm brass nozzle for E3D v6 hotends. Specs Material : Brass Opening diameter : 0.60mm Filament diameter : 1.75mm Thread : M6
Brass Nozzle 0.80mm for E3D V6 Hot End
Stock :
Montréal : Calculating...
Vancouver : Calculating...

Brass Nozzle 0.80mm for E3D V6 Hot End
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$9.99
0.80mm brass nozzle for E3D v6 hotends. Specs Material : Brass Opening diameter : 0.80mm Filament diameter : 1.75mm Thread : M6
E3D Nozzle X v6 0.40mm for 1.75mm filament
Stock :
Montréal : Calculating...
Vancouver : Calculating...

E3D Nozzle X v6 0.40mm for 1.75mm filament
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$41.99
Disclaimer : this product is covered by a limited wear warranty offered by the manufacturer. To exercise this warranty, the customer must return the nozzle, at their expense, to the manufacturer in the United Kingdom. The cost of doing so may exceed the cost of getting a new nozzle. The warranty is offered by the manufacturer and is not Voxel Fa...
E3D Nozzle X v6 0.40mm for 2.85mm filament
Stock :
Montréal : Calculating...
Vancouver : Calculating...

E3D Nozzle X v6 0.40mm for 2.85mm filament
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$41.99
Disclaimer : this product is covered by a limited wear warranty offered by the manufacturer. To exercise this warranty, the customer must return the nozzle, at their expense, to the manufacturer in the United Kingdom. The cost of doing so may exceed the cost of getting a new nozzle. The warranty is offered by the manufacturer and is not Voxel Fa...
E3D Nozzle X v6 0.60mm for 1.75mm filament
Stock :
Montréal : Calculating...
Vancouver : Calculating...

E3D Nozzle X v6 0.60mm for 1.75mm filament
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$41.99
Disclaimer : this product is covered by a limited wear warranty offered by the manufacturer. To exercise this warranty, the customer must return the nozzle, at their expense, to the manufacturer in the United Kingdom. The cost of doing so may exceed the cost of getting a new nozzle. The warranty is offered by the manufacturer and is not Voxel Fa...
E3D Nozzle X v6 0.60mm for 2.85mm filament
Stock :
Montréal : Calculating...
Vancouver : Calculating...

E3D Nozzle X v6 0.60mm for 2.85mm filament
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$41.99
Disclaimer : this product is covered by a limited wear warranty offered by the manufacturer. To exercise this warranty, the customer must return the nozzle, at their expense, to the manufacturer in the United Kingdom. The cost of doing so may exceed the cost of getting a new nozzle. The warranty is offered by the manufacturer and is not Voxel Fa...
E3D v6 Hardened Steel Nozzle 0.40mm
Stock :
Montréal : Calculating...
Vancouver : Calculating...

E3D v6 Hardened Steel Nozzle 0.40mm
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$29.99
This original E3D hardened steel nozzle is wear-resistant when using abrasive materials like Glowfill and carbon fiber-infused filament. Compatible with E3D v6 hotends (as found on the Original Prusa i3 MK3S 3D printer). Opening diameter : 0.40mm Filament diameter : 1.75mm
E3D v6 Hardened Steel Nozzle 0.50mm
Stock :
Montréal : Calculating...
Vancouver : Calculating...

E3D v6 Hardened Steel Nozzle 0.50mm
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$29.99
This original E3D hardened steel nozzle is wear-resistant when using abrasive materials like Glowfill and carbon fiber-infused filament. Compatible with E3D v6 hotends (as found on the Original Prusa i3 MK3S 3D printer). Opening diameter : 0.50mm Filament diameter : 1.75mm

E3D v6 Nozzle Fun Pack
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$49.99
An assortment of six brass nozzles in different sizes, all compatible with E3D v6 hotends. Includes a small spanner to make nozzle swap easier! Filament size : 1.75mm Nozzle sizes : 0.25mm 0.30mm 0.35mm 0.50mm 0.60mm 0.80mm

E3D v6 Nozzle Pro Pack
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$99.99
A set of six nozzles for experienced users! The tiny 0.15mm brass nozzle can print extremely fine details, while the 0.8mm one can print very high layers at higher speed. The nickel-plated copper alloy nozzles offer reduced plastic adhesion, great for sticky materials like PETG or TPU. Hardened steel is abrasion resistant, great for composite ma...
E3D Volcano Brass Nozzle 0.40mm for 2.85mm filament
Stock :
Montréal : Calculating...
Vancouver : Calculating...

E3D Volcano Brass Nozzle 0.40mm for 2.85mm filament
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$10.99
Volcano brass nozzle for the Volcano hotend from E3D, and similarly built hotends. Also available with a 0.60mm opening. Nozzle opening : 0.40mm Filament diameter : 2.85mm
Original Olsson Brass Nozzle 0.25mm
Stock :
Montréal : Calculating...
Vancouver : Calculating...

Original Olsson Brass Nozzle 0.25mm
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$13.50
The original Olsson nozzle, as seen on the Ultimaker 2+ and Ultimaker 2+ Extended. High precision manufacturing, made in Sweden by Anders Olsson. This nozzle is made for 2.85mm filament, and is compatible with the Olsson Block and E3D extruders. Also available in 0.40mm, 0.60mm, 0.80mm and stainless steel. Specs Material : brass Opening diamet...
Original Olsson Brass Nozzle 0.40mm
Stock :
Montréal : Calculating...
Vancouver : Calculating...

Original Olsson Brass Nozzle 0.40mm
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$13.50
The original Olsson nozzle, as seen on the Ultimaker 2+ and Ultimaker 2+ Extended. High precision manufacturing, made in Sweden by Anders Olsson. This nozzle is made for 2.85mm filament, and is compatible with the Olsson Block and E3D extruders. Also available in 0.25mm, 0.60mm, 0.80mm and stainless steel. Specs Material : brass Opening diamet...
Original Olsson Brass Nozzle 0.60mm
Stock :
Montréal : Calculating...
Vancouver : Calculating...

Original Olsson Brass Nozzle 0.60mm
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$13.50
The original Olsson nozzle, as seen on the Ultimaker 2+ and Ultimaker 2+ Extended. High precision manufacturing, made in Sweden by Anders Olsson. This nozzle is made for 2.85mm filament, and is compatible with the Olsson Block and E3D extruders. Also available in 0.25mm, 0.40mm, 0.80mm, and stainless steel. Specs Material : brass Opening diame...
Original Olsson Brass Nozzle 0.80mm
Stock :
Montréal : Calculating...
Vancouver : Calculating...

Original Olsson Brass Nozzle 0.80mm
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$13.50
The original Olsson nozzle, as seen on the Ultimaker 2+ and Ultimaker 2+ Extended. High precision manufacturing, made in Sweden by Anders Olsson. This nozzle is made for 2.85mm filament, and is compatible with the Olsson Block and E3D extruders. Also available in 0.25mm, 0.40mm, 0.60mm, and stainless steel. Specs Material : brass Opening diame...
Sindoh 3DWOX Replacement Nozzle Unit
Stock :
Montréal : Calculating...
Vancouver : Calculating...

Sindoh 3DWOX Replacement Nozzle Unit
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$179.99
Replacement nozzle unit for the Sindoh 3DWOX 1 3D printer. It is recommended to change the HEPA filter when changing the nozzle unit. Instructions for the replacement of the nozzle unit can be found in the user manual (pdf).
Tungsten Carbide Nozzle M6 0.40mm 1.75mm
Stock :
Montréal : Calculating...
Vancouver : Calculating...

Tungsten Carbide Nozzle M6 0.40mm 1.75mm
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$74.99
This extremely hard nozzle, created by Dyze Design, is made from tungsten carbide. Use it to print abrasive materials (carbon or glass fiber, for example). Tungsten carbide offers extreme hardness and abrasion resistance while maintaing excellent thermal conductivity, allowing prints at faster speeds than with hardened steel or similar nozzles. ...
Tungsten Carbide Nozzle M6 0.40mm 3.00mm
Stock :
Montréal : Calculating...
Vancouver : Calculating...

Tungsten Carbide Nozzle M6 0.40mm 3.00mm
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$74.99
This extremely hard nozzle, created by Dyze Design, is made from tungsten carbide. Use it to print abrasive materials (carbon or glass fiber, for example). Tungsten carbide offers extreme hardness and abrasion resistance while maintaing excellent thermal conductivity, allowing prints at faster speeds than with hardened steel or similar nozzles. ...
Tungsten Carbide Nozzle M6 High Flow 0.40mm 3.00mm
Stock :
Montréal : Calculating...
Vancouver : Calculating...

Tungsten Carbide Nozzle M6 High Flow 0.40mm 3.00mm
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$74.99
This extremely hard nozzle, created by Dyze Design, is made from tungsten carbide. Use it to print abrasive materials (carbon or glass fiber, for example). Tungsten carbide offers extreme hardness and abrasion resistance while maintaing excellent thermal conductivity, allowing prints at faster speeds than with hardened steel or similar nozzles....
Ultimaker 2+ Connect Single nozzle 3D printer
Stock :
Montréal : Calculating...
Vancouver : Calculating...

Ultimaker 2+ Connect Single nozzle 3D printer
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$3,299.00
The newest addition to Ultimaker's line of FFF printers, The Ultimaker 2+ Connect. A single nozzle printer with networking capabilities and a new touchscreen, the Ultimaker 2+ Connect is your reliable first step into our world of easy, remote 3D printing. Simply unbox and connect three components, and get started. This speedy setup even makes in...