- Home
- E3D Original Parts
E3D Original Parts

24V DC Fan 30x30x10mm
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$7.99
Axial fan for hotend cooling. Dimensions : 30x30x10mm Power : DC 24V 0.08A 1.92W Cable length : 1m
Brass Nozzle 0.25mm for E3D V6 Hotend
Stock :
Montréal : Calculating...
Vancouver : Calculating...

Brass Nozzle 0.25mm for E3D V6 Hotend
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$14.99
0.25mm brass nozzle for E3D v6 hotends. Specs Material : Brass Opening diameter : 0.25mm Filament diameter : 1.75mm Thread : M6
Brass Nozzle 0.40mm for E3D V6 Hot End
Stock :
Montréal : Calculating...
Vancouver : Calculating...

Brass Nozzle 0.40mm for E3D V6 Hot End
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$9.99
0.40mm brass nozzle for E3D v6 hotends. Specs Material : Brass Opening diameter : 0.40mm Filament diameter : 1.75mm Thread : M6
Brass Nozzle 0.60mm for E3D V6 Hotend
Stock :
Montréal : Calculating...
Vancouver : Calculating...

Brass Nozzle 0.60mm for E3D V6 Hotend
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$9.99
0.60mm brass nozzle for E3D v6 hotends. Specs Material : Brass Opening diameter : 0.60mm Filament diameter : 1.75mm Thread : M6
Brass Nozzle 0.80mm for E3D V6 Hot End
Stock :
Montréal : Calculating...
Vancouver : Calculating...

Brass Nozzle 0.80mm for E3D V6 Hot End
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$9.99
0.80mm brass nozzle for E3D v6 hotends. Specs Material : Brass Opening diameter : 0.80mm Filament diameter : 1.75mm Thread : M6
E3D Heater Cartridge 12V for Prusa i3 MK2
Stock :
Montréal : Calculating...
Vancouver : Calculating...

E3D Heater Cartridge 12V for Prusa i3 MK2
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$11.99
Replacement heater cartridge for the Prusa i3 MK2 or MK2S. Fully wired and ready to be installed. Power : 40W 12V
E3D Heater Cartridge 24V for Prusa i3 MK3/S
Stock :
Montréal : Calculating...
Vancouver : Calculating...

E3D Heater Cartridge 24V for Prusa i3 MK3/S
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$11.99
Replacement heater cartridge for the Prusa i3 MK3 or MK3S. Fully wired and ready to be installed. The heater cartridge is ready to fit to a Molex 0395300002 connector (not included, see accessories); you can reuse the one already on your board if replacing an existing heater cartridge. Power : 40W 24V

E3D Hotend Collet 1.75mm
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$1.99
Replacement bowden collet for E3D hotends (1.75mm filament).
E3D Nozzle X v6 0.40mm for 1.75mm filament
Stock :
Montréal : Calculating...
Vancouver : Calculating...

E3D Nozzle X v6 0.40mm for 1.75mm filament
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$41.99
Disclaimer : this product is covered by a limited wear warranty offered by the manufacturer. To exercise this warranty, the customer must return the nozzle, at their expense, to the manufacturer in the United Kingdom. The cost of doing so may exceed the cost of getting a new nozzle. The warranty is offered by the manufacturer and is not Voxel Fa...
E3D Nozzle X v6 0.40mm for 2.85mm filament
Stock :
Montréal : Calculating...
Vancouver : Calculating...

E3D Nozzle X v6 0.40mm for 2.85mm filament
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$41.99
Disclaimer : this product is covered by a limited wear warranty offered by the manufacturer. To exercise this warranty, the customer must return the nozzle, at their expense, to the manufacturer in the United Kingdom. The cost of doing so may exceed the cost of getting a new nozzle. The warranty is offered by the manufacturer and is not Voxel Fa...
E3D Nozzle X v6 0.60mm for 1.75mm filament
Stock :
Montréal : Calculating...
Vancouver : Calculating...

E3D Nozzle X v6 0.60mm for 1.75mm filament
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$41.99
Disclaimer : this product is covered by a limited wear warranty offered by the manufacturer. To exercise this warranty, the customer must return the nozzle, at their expense, to the manufacturer in the United Kingdom. The cost of doing so may exceed the cost of getting a new nozzle. The warranty is offered by the manufacturer and is not Voxel Fa...
E3D Nozzle X v6 0.60mm for 2.85mm filament
Stock :
Montréal : Calculating...
Vancouver : Calculating...

E3D Nozzle X v6 0.60mm for 2.85mm filament
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$41.99
Disclaimer : this product is covered by a limited wear warranty offered by the manufacturer. To exercise this warranty, the customer must return the nozzle, at their expense, to the manufacturer in the United Kingdom. The cost of doing so may exceed the cost of getting a new nozzle. The warranty is offered by the manufacturer and is not Voxel Fa...

E3D v6 Gold Hotend 24V 1.75mm
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$149.99
Please see the notes below to install this hotend on a Prusa i3 MK3/S. The third anniversary edition of the famed E3D v6 Hotend, featuring a gold-anodized heat sink and high-end components. This hotend for 1.75mm filament comes fully assembled, with a 0.40mm hardened steel nozzle, high-precision heater cartridge and thermistor. Features : Gold ...
E3D v6 Gold Hotend KIT 24V 1.75mm
Stock :
Montréal : Calculating...
Vancouver : Calculating...

E3D v6 Gold Hotend KIT 24V 1.75mm
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$139.99
Please see the notes below to install this hotend on a Prusa i3 MK3/S. The third anniversary edition of the famed E3D v6 Hotend, featuring a gold-anodized heat sink and high-end components. This hotend for 1.75mm filament comes AS A KIT (assembled version can be found here), with a 0.40mm hardened steel nozzle, high-precision heater cartridge an...
E3D v6 Hardened Steel Nozzle 0.40mm
Stock :
Montréal : Calculating...
Vancouver : Calculating...

E3D v6 Hardened Steel Nozzle 0.40mm
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$29.99
This original E3D hardened steel nozzle is wear-resistant when using abrasive materials like Glowfill and carbon fiber-infused filament. Compatible with E3D v6 hotends (as found on the Original Prusa i3 MK3S 3D printer). Opening diameter : 0.40mm Filament diameter : 1.75mm
E3D v6 Hardened Steel Nozzle 0.50mm
Stock :
Montréal : Calculating...
Vancouver : Calculating...

E3D v6 Hardened Steel Nozzle 0.50mm
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$29.99
This original E3D hardened steel nozzle is wear-resistant when using abrasive materials like Glowfill and carbon fiber-infused filament. Compatible with E3D v6 hotends (as found on the Original Prusa i3 MK3S 3D printer). Opening diameter : 0.50mm Filament diameter : 1.75mm
E3D v6 Heatbreak for Prusa i3 MK3/S
Stock :
Montréal : Calculating...
Vancouver : Calculating...

E3D v6 Heatbreak for Prusa i3 MK3/S
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$24.99
Replacement heatbreak for the E3D v6 hotend of the Prusa i3 MK3/S and MMU2S. This heatbreak is not the standard E3D v6 heatbreak, it was developped by Prusa and E3D specially for the MK3 and MMU.
E3D v6 Heater Block Kit for Prusa i3 Printers
Stock :
Montréal : Calculating...
Vancouver : Calculating...

E3D v6 Heater Block Kit for Prusa i3 Printers
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$20.99
Replacement heater block kit for the E3D v6 hotend of the Prusa i3 MK2 / MK3 / MMU / MMU2. Includes the screws and matching hex keys to hold the heater cartridge and the thermistor. The heater block is also available "naked", without any fittings, here.

E3D v6 Nozzle Fun Pack
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$49.99
An assortment of six brass nozzles in different sizes, all compatible with E3D v6 hotends. Includes a small spanner to make nozzle swap easier! Filament size : 1.75mm Nozzle sizes : 0.25mm 0.30mm 0.35mm 0.50mm 0.60mm 0.80mm

E3D v6 Nozzle Pro Pack
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$99.99
A set of six nozzles for experienced users! The tiny 0.15mm brass nozzle can print extremely fine details, while the 0.8mm one can print very high layers at higher speed. The nickel-plated copper alloy nozzles offer reduced plastic adhesion, great for sticky materials like PETG or TPU. Hardened steel is abrasion resistant, great for composite ma...
E3D Volcano Brass Nozzle 0.40mm for 2.85mm filament
Stock :
Montréal : Calculating...
Vancouver : Calculating...

E3D Volcano Brass Nozzle 0.40mm for 2.85mm filament
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$10.99
Volcano brass nozzle for the Volcano hotend from E3D, and similarly built hotends. Also available with a 0.60mm opening. Nozzle opening : 0.40mm Filament diameter : 2.85mm
E3D Volcano Brass Nozzle 0.60mm for 2.85mm filament
Stock :
Montréal : Calculating...
Vancouver : Calculating...

E3D Volcano Brass Nozzle 0.60mm for 2.85mm filament
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$10.99
Volcano brass nozzle for the Volcano hotend from E3D, and similarly built hotends. Also available with a 0.40mm opening. Nozzle opening : 0.60mm Filament diameter : 2.85mm
Hotend Cleaning Filament 1.75mm by eSun
Stock :
Montréal : Calculating...
Vancouver : Calculating...

Hotend Cleaning Filament 1.75mm by eSun
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$34.99
This hotend cleaning filament is made from a compound used for commercial extruder purging. Use it to unclog a jammed nozzle, or when switching materials to ensure a proper purge of your hotend. Can be used at temperatures between 160°C and 280°C. Filament diameter : 1.75mm Weight : 100g
Hotend thermistor for Prusa i3 MK2 and MK3
Stock :
Montréal : Calculating...
Vancouver : Calculating...

Hotend thermistor for Prusa i3 MK2 and MK3
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$14.99
Replacement hotend thermistor for the Prusa i3 MK2/S and MK3/S. Fully wired and ready to be installed.