Products
623h Bearing and Housing for Prusa i3 Printers
Stock :
Montréal : Calculating...
Vancouver : Calculating...

623h Bearing and Housing for Prusa i3 Printers
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$9.99
Replacement 623h bearing and housing for the x-axis idler of Prusa i3 printers (MK2/S, MK3/S). Bearing inner diameter : 3mm

Antivibration foot
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$1.32
This product includes: Antivibration foot (1 pcs) To replace the part/s, please consult our Assembly Manuals. Make sure to follow the manual for your printer model.
Bed Thermistor for Prusa i3 MK2 and MK3
Stock :
Montréal : Calculating...
Vancouver : Calculating...

Bed Thermistor for Prusa i3 MK2 and MK3
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$9.99
Replacement thermistor for the Prusa i3 MK2/S and MK3/S. Fully wired and ready to be installed.
Display for Ultimaker 2 and Ultimaker 3
Stock :
Montréal : Calculating...
Vancouver : Calculating...

Display for Ultimaker 2 and Ultimaker 3
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$47.99
White OLED screen for Ultimaker 2 Go, Ultimaker 2, Ultimaker 2+ / Extended, Ultimaker 3 / Extended. Ultimaker Part Number: 1252

E3D Hotend Collet 1.75mm
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$1.99
Replacement bowden collet for E3D hotends (1.75mm filament).
E3D v6 Heatbreak for Prusa i3 MK3/S
Stock :
Montréal : Calculating...
Vancouver : Calculating...

E3D v6 Heatbreak for Prusa i3 MK3/S
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$24.99
Replacement heatbreak for the E3D v6 hotend of the Prusa i3 MK3/S and MMU2S. This heatbreak is not the standard E3D v6 heatbreak, it was developped by Prusa and E3D specially for the MK3 and MMU.
E3D v6 Heater Block for Prusa i3 Printers
Stock :
Montréal : Calculating...
Vancouver : Calculating...

E3D v6 Heater Block for Prusa i3 Printers
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$16.99
Heater block only for the E3D v6 hotend of the Prusa i3 MK2/S / MK3/S / MMU / MMU2. No screws, fittings or hex key included. Just the block. The heater block kit including fittings is available here.
E3D v6 Heater Block Kit for Prusa i3 Printers
Stock :
Montréal : Calculating...
Vancouver : Calculating...

E3D v6 Heater Block Kit for Prusa i3 Printers
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$20.99
Replacement heater block kit for the E3D v6 hotend of the Prusa i3 MK2 / MK3 / MMU / MMU2. Includes the screws and matching hex keys to hold the heater cartridge and the thermistor. The heater block is also available "naked", without any fittings, here.
Extruder Hobbed Pulley for Prusa i3 MK2 / MMU2S
Stock :
Montréal : Calculating...
Vancouver : Calculating...

Extruder Hobbed Pulley for Prusa i3 MK2 / MMU2S
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$9.99
Replacement extruder hobbed pulley for Prusa i3 MK2 / MK2S/ MMU2S. Includes the grub screw for assembly.
Extruder PTFE Tubing for Prusa i3 MK3
Stock :
Montréal : Calculating...
Vancouver : Calculating...

Extruder PTFE Tubing for Prusa i3 MK3
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$1.99
Replacement extruder PTFE tubing for Prusa i3 MK2 / MK2S / MK2.5 / MK3 / MMU2. The tube is trimmed and chamfered for a perfect fit with the existing components. This tube is not part of the extruder assembly for the MK3S and MK2.5S models. Length: 13mm (tolerance +/- 0.2mm) Inner diameter: 2mm Outer diameter: 4mm Technical drawings for the var...

Filament Flow Sensor PCB RIGHT
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$27.00
Ultimaker Part number 2237
Hardened Smooth Rod 8x320mm Z-Axis for Prusa i3
Stock :
Montréal : Calculating...
Vancouver : Calculating...

Hardened Smooth Rod 8x320mm Z-Axis for Prusa i3
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$14.99
Hardened steel smooth rod for the Z-axis of Prusa i3 MK2/S, MK2.5/S, MK3/S 3D printers. Diameter : 8mm Length : 320mm
Hardened Smooth Rod 8x330mm Y-Axis for Prusa i3
Stock :
Montréal : Calculating...
Vancouver : Calculating...

Hardened Smooth Rod 8x330mm Y-Axis for Prusa i3
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$14.99
Hardened steel smooth rod for the Y-axis of Prusa i3 MK2/S, MK2.5/S and MK3/S 3D printers. Diameter : 8mm Length : 330mm
Hardened Smooth Rod 8x370mm X-Axis for Prusa i3
Stock :
Montréal : Calculating...
Vancouver : Calculating...

Hardened Smooth Rod 8x370mm X-Axis for Prusa i3
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$14.99
Hardened steel smooth rod for the X-axis of Prusa i3 MK2/S, MK2.5/S and MK3/S 3D printers. Diameter : 8mm Length : 370mm
Hot end cooling fan for UMK S series and UM3 + UM3X
Stock :
Montréal : Calculating...
Vancouver : Calculating...

Hot end cooling fan for UMK S series and UM3 + UM3X
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$25.99
Axial Hot end cooling fan: 35x35x10 Works with: S5/S3/UM3/UM3X Ultimaker Part Number : 2133 replaced with 215431
Hotend PTFE Tubing for Prusa i3 MK2 / MK3
Stock :
Montréal : Calculating...
Vancouver : Calculating...

Hotend PTFE Tubing for Prusa i3 MK2 / MK3
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$1.99
Replacement hotend PTFE tubing for Prusa i3 MK2 / MK2S / MK.25 / MK3 / MMU2. The tube is trimmed and chamfered for a perfect fit with the existing components. Not compatible with the MK2.5S / MK3S / MMU2S, use this tube instead. Length: 50mm (tolerance +/- 0.2 mm) Inner diameter: 1.85 mm Outer diameter: 4 mm Technical drawings for the various ...
Hotend PTFE Tubing for Prusa i3 MK3S
Stock :
Montréal : Calculating...
Vancouver : Calculating...

Hotend PTFE Tubing for Prusa i3 MK3S
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$1.99
Replacement hotend PTFE tubing for Prusa i3 MK3S / MK2.5S / MMU2S. The tube is trimmed and chamfered for a perfect fit with the existing components. Not compatible with Prusa i3 MK2 / MK2S / MK.25 / MK3 / MMU2, use this tube instead. Length: 44.3mm (tolerance +/- 0.2 mm) Inner diameter: 1.85 mm Outer diameter: 4 mm Technical drawings for the v...
Hotend PTFE Tubing for the MK3S+/MMU2S
Stock :
Montréal : Calculating...
Vancouver : Calculating...

Hotend PTFE Tubing for the MK3S+/MMU2S
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$1.99
Replacement hotend PTFE tubing for Prusa i3 MK3S+ / MMU2S. The tube is trimmed and chamfered for a perfect fit with the existing components. It is ONLY compatible with the MK3S+ and MK3S+ with MMU2S hotends. Not compatible with Prusa i3 MK2 / MK2S / MK.25 / MK3 / / MK3S / MMU2, use this tube instead for the MK3. Or this tube for the Mk3S Leng...
Hotend thermistor for Prusa i3 MK2 and MK3
Stock :
Montréal : Calculating...
Vancouver : Calculating...

Hotend thermistor for Prusa i3 MK2 and MK3
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$14.99
Replacement hotend thermistor for the Prusa i3 MK2/S and MK3/S. Fully wired and ready to be installed.
Idler Tension Spring for Prusa i3 printers
Stock :
Montréal : Calculating...
Vancouver : Calculating...

Idler Tension Spring for Prusa i3 printers
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$3.99
Idler tension spring (1x) for the Original Prusa i3 MK2/S, MK3/S and Multi-Material Add-on (MMU2/S).
IR Filament Sensor Cable for Prusa i3 MK3S
Stock :
Montréal : Calculating...
Vancouver : Calculating...

IR Filament Sensor Cable for Prusa i3 MK3S
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$6.99
Replacement cable for the IR Filament Sensor for Prusa i3 MK3S Not compatible with the optical filament sensor (Prusa i3 MK3), use this cable instead.
LM8UU Linear Bearing for Prusa i3 3D printers
Stock :
Montréal : Calculating...
Vancouver : Calculating...

LM8UU Linear Bearing for Prusa i3 3D printers
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$2.49
Replacement LM8UU Linear Bearing for Prusa i3 3D printers. For use on the y-axis rods and the Prusa Mini
MK52 Magnetic Heatbed for Prusa i3 MK3
Stock :
Montréal : Calculating...
Vancouver : Calculating...

MK52 Magnetic Heatbed for Prusa i3 MK3
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$149.99
Original MK52 magnetic heatbed for the Prusa i3 MK3/S 3D printer. Thermistor included, spring steel sheet printing surface not included.
Optical Filament Sensor Cable for Prusa i3 MK3
Stock :
Montréal : Calculating...
Vancouver : Calculating...

Optical Filament Sensor Cable for Prusa i3 MK3
Stock :
Montréal : Calculating...
Vancouver : Calculating...
$5.99
Replacement cable for the optical filament sensor for Prusa i3 MK3. Not compatible with the IR filament sensor (Prusa i3 MK3S), use this cable instead.