$19.99 $27.99
PolyLite PLA by Polymaker is a high-quality PLA filament designed for reliability and ease of printing. Filament diameter : 1.75mm Net weight : 1kg Color : natural, white, grey, black, orange, yellow, green, teal, blue, purple and red Data Sheets Click here to download the Technical Data Sheet for the PolyLite PLA filament. Click here to downloa...
$12.99
*** PLEASE NOTE THAT 3DLAC CAN ONLY BE SHIPPED INSIDE CANADA BY CANADA POST EXPEDITED PARCEL. Any order containing this product with any other services will be cancelled or shipped with Canada Post expedited parcel anyway *** The polyvalent adhesion solution for your 3D printing needs. Use with blue painter's tape on a cold print bed, or directl...
$9.99
The polyvalent adhesion solution for your 3D printing needs. Use with blue painter's tape on a cold print bed, or directly on glass or PEI-covered heatbeds to maximize part adhesion, prevent warping and reduce print failures. Useful for printing PLA, ABS, polycarbonate, PETG, copolyester, and more! Unlike its sibling the 3DLAC Spray, this bottle...
$9.99
0.40mm brass nozzle for E3D v6 hotends. Specs Material :Â Brass Opening diameter :Â 0.40mm Filament diameter :Â 1.75mm Thread :Â M6
$14.99
Replacement hotend thermistor. Fully wired and ready to be installed. It is ONLY compatible with MK2 / MK2S / MK2.5 / MK2.5S / MK3 / MK3S / MK3S+ / MK3.5  This product includes: Hotend thermistor (1 pcs) Specifications: Connector: Molex 5057-9402 Cable length: 750 mm  To correctly install this replacement part, visit the Prusa Research kno...
$17.00
* 6.4 oz or 24 oz ** For industrial use only *** SLA/SLS prints, FDM Prints (ABS, PLA, Laywoo-D3, WoodFill, T-GLASE etc.)  *** -> Hacking t-glase to look more like glass! <- ***  XTC-3D® is a protective coating for smoothing and finishing 3D printed parts. Two liquids are mixed together and brushed onto any 3D print. Coating self-levels...
$11.99
Replacement heater cartridge. Fully wired and ready to be installed. The heater cartridge is ready to fit to a Molex 0395300002 connector (not included, see accessories); you can reuse the one already on your board if replacing an existing heater cartridge. Power : 40W 24V It is ONLY compatible with Prusa i3 MK3 / MK3S / MK3S+
$7.94
Replacement heatbed thermistor set for the Original Prusa MK2/S, MK2.5/S, MK3/S/+ and MINI/+ This product includes: Heatbed thermistor (1 pcs) Kapton tape (1 pcs) Aluminum tape (1 pcs)  Specifications: Connector: Molex 5057-9402 Cable length: 650 mm  To correctly install this replacement part, visit the Prusa Research knowledge base at hel...
$24.99
Meet the new Materio3D Regular PLA filament! Materio3D's Regular PLA works well and demonstrates all the typical characteristics of PLA. - It prints exceptionally well and the final print result is of high quality.- This filament is stiff but a little more brittle than Materio3D's Tough PLA. - It is the most economical filament in the PLA range...
$83.84
The recommended filament to use with your Ultimaker 3D printer. The Ultimaker PLA (polylactic acid) is made of organic and renewable resources. Easy to use and produces a good surface finish for a variety of 3D printing projects, no matter your skill level. Diameter : 2.85mm Color :Â Transparent, Pearl White, White, Silver Metallic, Black, Orange...
$7.49
These socks will keep your nozzle clean and free of burnt on blackened plastic. They don’t just keep the nozzle clean, but also keep heat inside the hotend, and off the print.Made of a heat-resistant, non-stick silicone material our sock will repel build-up of molten plastic. This really helps with sticky materials like Co-Polyesters and filled ...
$29.99
Materio3D PETG filament is now available in Canada. Manufactured on the south shore of Montreal by Materio3D, This PETG filament is rigid, tough, high impact strength, and has moderate heat resistance. Diameter : 1.75mm Color: Rockies Cold White, Atlas Coal Black, Montréal Roadworks Orange
Important Notice Before Purchase
Â
1. Limitations: After installing the TPU hotend, the filament cutter installation is not supported, so the filament cutter function cannot be used, and the right nozzle does not support automatic filament changing and automatic filament feeding and retracting.
2. Only flexible filaments are allowed: The TPU hotend has a special inner coating, printing hard filaments is prohibited (such as PLA, PETG, TPU for AMS), otherwise it will cause the coating to wear and fail.
3. Position Limitation: The TPU hotend can only be installed on the right nozzle. If it is installed on the left nozzle, it will cause the nozzle lifting mechanism to malfunction.
4. Installation Guide: Please read the official H2D TPU High-Flow Kit installation guide on Bambu Lab Wiki before purchasing.
5. Model Compatibility: Only supported on H2D and H2D Pro. It is not compatible with other models.
Â
Â
Â
The specially designed hotend reduces extrusion resistance and extends the melting zone, enabling faster and more stable TPU printing. When printing 90A TPU, it delivers up to 100% higher flow rate and cuts print time by around 30% for typical applications such as footwear.
Â

Â

Â

Â
Â
Print parameters are precisely fine-tuned for all Bambu TPU filaments when used with the TPU High-Flow Kit. No manual tweaking required—allowing sticky TPU materials to print smoothly right out of the box.
Â

Â
Â
Installation takes just a few minutes. Simply pop off the front cover, remove the filament cutter, and slide in the High-Flow hotend—ready to print in no time.
Â
Â
Â
Â
| TPU | H2D Standard Flow Hotend | H2D TPU High-Flow Hotend | ||
|---|---|---|---|---|
| 0.4 mm Nozzle | 0.6 mm Nozzle | 0.4 mm Nozzle | 0.6 mm Nozzle | |
| 85A | Not Compatible | 2.2 mm³/s | 2.5 mm³/s | 4.8 mm³/s |
| 90A | 2.8 mm³/s | 2.8 mm³/s | 5.6 mm³/s | 5.6 mm³/s |
| 95A HF | 12 mm³/s | 12 mm³/s | 16 mm³/s | 16 mm³/s |
Â
Note: Parameter optimization and speed enhancements currently apply only to Bambu TPU 85A, Bambu TPU 90A, and Bambu TPU 95A HF.
Â
Â
Â
Bambu TPU 85A
Bambu TPU 90A
Bambu TPU 95A
Bambu TPU 95A HF
Generic TPU
Â
Â
Â
Please refer to the installation guide for the H2D TPU High-Flow Kit available on Bambu Lab Wiki.
For TPU printing recommendations, please also refer to the TPU 85A & 90A Printing Guide for the H2 Series on Bambu Lab Wiki.
| Item | Quantity |
|---|---|
| 0.4 mm High-Flow TPU Hotend | 1 |
| 0.6 mm High-Flow TPU Hotend | 1 |
| TPU High-Flow Front Cover Guide | 1 |
| TPU Hotend Cover | 1 |
| Hotend Cover | 1 |
| M2×5 Screws for Hotend Cover | 2 |
| Parameter | Specification |
|---|---|
| Materials | Plastic, Metal |
| Color | Black |
| Packaging Size | 105 × 54 × 33 mm |
| Packaging Weight | 46.9 g |