$19.99 $27.99
PolyLite PLA by Polymaker is a high-quality PLA filament designed for reliability and ease of printing. Filament diameter : 1.75mm Net weight : 1kg Color : natural, white, grey, black, orange, yellow, green, teal, blue, purple and red Data Sheets Click here to download the Technical Data Sheet for the PolyLite PLA filament. Click here to downloa...
$12.99
*** PLEASE NOTE THAT 3DLAC CAN ONLY BE SHIPPED INSIDE CANADA BY CANADA POST EXPEDITED PARCEL. Any order containing this product with any other services will be cancelled or shipped with Canada Post expedited parcel anyway *** The polyvalent adhesion solution for your 3D printing needs. Use with blue painter's tape on a cold print bed, or directl...
$9.99
The polyvalent adhesion solution for your 3D printing needs. Use with blue painter's tape on a cold print bed, or directly on glass or PEI-covered heatbeds to maximize part adhesion, prevent warping and reduce print failures. Useful for printing PLA, ABS, polycarbonate, PETG, copolyester, and more! Unlike its sibling the 3DLAC Spray, this bottle...
$9.99
0.40mm brass nozzle for E3D v6 hotends. Specs Material :Â Brass Opening diameter :Â 0.40mm Filament diameter :Â 1.75mm Thread :Â M6
$14.99
Replacement hotend thermistor. Fully wired and ready to be installed. It is ONLY compatible with MK2 / MK2S / MK2.5 / MK2.5S / MK3 / MK3S / MK3S+ / MK3.5  This product includes: Hotend thermistor (1 pcs) Specifications: Connector: Molex 5057-9402 Cable length: 750 mm  To correctly install this replacement part, visit the Prusa Research kno...
$17.00
* 6.4 oz or 24 oz ** For industrial use only *** SLA/SLS prints, FDM Prints (ABS, PLA, Laywoo-D3, WoodFill, T-GLASE etc.)  *** -> Hacking t-glase to look more like glass! <- ***  XTC-3D® is a protective coating for smoothing and finishing 3D printed parts. Two liquids are mixed together and brushed onto any 3D print. Coating self-levels...
$11.99
Replacement heater cartridge. Fully wired and ready to be installed. The heater cartridge is ready to fit to a Molex 0395300002 connector (not included, see accessories); you can reuse the one already on your board if replacing an existing heater cartridge. Power : 40W 24V It is ONLY compatible with Prusa i3 MK3 / MK3S / MK3S+
$7.94
Replacement heatbed thermistor set for the Original Prusa MK2/S, MK2.5/S, MK3/S/+ and MINI/+ This product includes: Heatbed thermistor (1 pcs) Kapton tape (1 pcs) Aluminum tape (1 pcs)  Specifications: Connector: Molex 5057-9402 Cable length: 650 mm  To correctly install this replacement part, visit the Prusa Research knowledge base at hel...
$24.99
Meet the new Materio3D Regular PLA filament! Materio3D's Regular PLA works well and demonstrates all the typical characteristics of PLA. - It prints exceptionally well and the final print result is of high quality.- This filament is stiff but a little more brittle than Materio3D's Tough PLA. - It is the most economical filament in the PLA range...
$83.84
The recommended filament to use with your Ultimaker 3D printer. The Ultimaker PLA (polylactic acid) is made of organic and renewable resources. Easy to use and produces a good surface finish for a variety of 3D printing projects, no matter your skill level. Diameter : 2.85mm Color :Â Transparent, Pearl White, White, Silver Metallic, Black, Orange...
$7.49
These socks will keep your nozzle clean and free of burnt on blackened plastic. They don’t just keep the nozzle clean, but also keep heat inside the hotend, and off the print.Made of a heat-resistant, non-stick silicone material our sock will repel build-up of molten plastic. This really helps with sticky materials like Co-Polyesters and filled ...
$29.99
Materio3D PETG filament is now available in Canada. Manufactured on the south shore of Montreal by Materio3D, This PETG filament is rigid, tough, high impact strength, and has moderate heat resistance. Diameter : 1.75mm Color: Rockies Cold White, Atlas Coal Black, Montréal Roadworks Orange
One of Voxel Factory favorite's release since years! Why?
The Form 4 is a blazing fast masked SLA 3D printer that combines an industry-leading materials library with a reliable, accurate print engine. Turn your ideas into reality faster than ever with easy workflows, leading reliability, and stunning part quality using the Form 4 ecosystem.
Form 4’s speed is driven by Formlabs new Low Force Display™ Print Engine, a powerful combination of ultra-high power LEDs, collimating lenses, optical filters, and a robust liquid crystal display. Together they cure each layer of resin rapidly — regardless of part size or quantity. With tight tolerances, parts printed in every resin on Form 4 will match your design parameters, every time.
Looking to print with biocompatible materials? See Form 4B.
Â
| Printer | Form 4 |
| Technology | Masked Stereolithography (MSLA) |
| Print Engine | Low Force Displayâ„¢ (LFD) |
| Minimum dimensions for convenient access (W × D × H) | 40.7 × 47.8 × 84.4 cm 16.0 × 18.8 × 33.2 in |
| Printer dimensions (W × D × H) | 39.8 × 36.7 × 55.4 cm 15.7 × 14.5 × 21.9 in |
| Printer weight | 18.3 kg 40.4 lb |
| Build volume (W × D × H) | 200 × 125 × 210 mm 7.9 × 4.9 × 8.3 in Parts taller than 190 mm (7.5 in) require that the resin tank be removed with the build platform and the wash basket be removed from Form Wash. |
| Layer thickness (Axis resolution) | 25–300 microns 0.001–0.012 in |
| XY resolution | 50 micron pixel size with pretuned anti-aliasing 0.002 in |
| Optical power intensity | 16 mW/cm² delivered to the print plane |
| Optical wavelength | 405 nm |
| Resin cartridges | 1 |
| Resin dispensing system | Automated |
| Biocompatible materials | No (available on Form 4B) |
| Supports | Auto-generated Light-touch removal |
| Operating environment | 18–28 °C 64–82 °F Low ambient humidity |
| Operating temperature | Auto-heats resin to 25–45 °C (77–113 °F), depending on material |
| Temperature control | Direct resin heating |
| Power requirements | 100–240 VAC Maximum 4.8 A 50/60 Hz 480 W |
| Connectivity | Wi-Fi: 2.4, 5 GHz Ethernet: 1000 Mbit USB: 2.0 |
| Wi-Fi connectivity | Protocol: IEEE 802.11 b/g/n Frequency: 2.4 GHz, 5 GHz Supported security: WPA/WPA2 |
| Ethernet connectivity | RJ-45 Ethernet (10BASE-T/100BASE-TX/1000BASE-T) LAN Port Connect with a shielded Ethernet cable (not included): minimum Cat5, or Cat5e or Cat6 for 1000BASE-T. |
| USB connectivity | USB C port with a USB C-A cable |
| Printer control | Interactive touchscreen |
| Alerts | Touchscreen alerts SMS/email via Dashboard Speaker for audio alerts |
| Camera | Integrated camera 2592 × 1944 resolution (5 MP) |
| Print preparation | PreForm desktop software |
| File type | STL, OBJ, or 3MF |