Formlabs Form 2 & 3 Surgical Guide Resin

{"id":9007643361516,"title":"Bambu Lab PTFE Tube Coupler","handle":"bambu-lab-ptfe-tube-coupler","description":"\u003ch3\u003eOverview\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThe PTFE Tube Coupler is a component used to connect the PTFE tube, which is mounted on the back of the printer and used to connect the PTFE tube between the buffer and the tool head.\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eX1 Series and P1 Series\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eLearn more about the replacement of the PTFE Tube Coupler (w\/o holder) on \u003ca rel=\"noopener\" href=\"https:\/\/wiki.bambulab.com\/en\/filament-acc\/acc\/replacing-the-pneumatic-connector\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cspan\u003eBambu Lab Wiki\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eLearn more about the replacement of the PTFE Tube Coupler (w\/ holder) on \u003cspan\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/wiki.bambulab.com\/en\/p1\/maintenance\/tube-anchor-assembly\" target=\"_blank\"\u003eBambu Lab Wiki\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eInstructions for use\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e1. The PTFE Tube Connector is designed with a clear direction of use, as shown in the figure below. Connect the PTFE tube from the buffer output to the IN end, and the PTFE tube from the tool head to the OUT end. It is important to note that reverse connections may cause material blockage, so it is essential to ensure that the installation direction is correct.\u003c\/p\u003e\n\u003cp\u003e2. When AMS is not being used, it is necessary to remove the feed tube connector from the OUT end, disconnect the connection between the feed tube connector and the PTFE tube of the tool head, and directly insert the consumable material wire into the PTFE tube of the tool head.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/store.bblcdn.com\/s5\/default\/ad2779e67431450b92c2884a52a670ab.png\" alt=\"PTFE Tube Connector\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/store.bblcdn.com\/s5\/default\/13a247a2a73e4914a53234a05da79116.png\" alt=\"PTFE Tube Connector\"\u003e\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ch3 class=\"pct_st\"\u003eProduct Specification\u003c\/h3\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eQuantity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e3 pcs\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eMaterials\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003ePlastic, metal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003ePackage weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e25 g\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003ePackage Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e190*70*50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","published_at":"2025-09-05T16:31:48-04:00","created_at":"2025-09-05T16:31:46-04:00","vendor":"Bambu Lab","type":"bambu Lab parts","tags":["Bambu Lab","Parts"],"price":599,"price_min":599,"price_max":599,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":46796722798828,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"BBL-PTF-TUB-COU-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Bambu Lab PTFE Tube Coupler","public_title":null,"options":["Default Title"],"price":599,"weight":30,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6975337032021","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_PTFE_Tube_Coupler_product_picture.webp?v=1757104157","\/\/www.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_PTFE_Tube_Coupler_idk.webp?v=1757104157","\/\/www.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_PTFE_Tube_Coupler_instructions.webp?v=1757104157"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_PTFE_Tube_Coupler_product_picture.webp?v=1757104157","options":["Title"],"media":[{"alt":"Bambu Lab PTFE Tube Coupler","id":35895979737324,"position":1,"preview_image":{"aspect_ratio":1.381,"height":1050,"width":1450,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_PTFE_Tube_Coupler_product_picture.webp?v=1757104157"},"aspect_ratio":1.381,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_PTFE_Tube_Coupler_product_picture.webp?v=1757104157","width":1450},{"alt":null,"id":35895979639020,"position":2,"preview_image":{"aspect_ratio":1.381,"height":1050,"width":1450,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_PTFE_Tube_Coupler_idk.webp?v=1757104157"},"aspect_ratio":1.381,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_PTFE_Tube_Coupler_idk.webp?v=1757104157","width":1450},{"alt":"Bambu Lab PTFE Tube Coupler instructions","id":35895979704556,"position":3,"preview_image":{"aspect_ratio":1.381,"height":1050,"width":1450,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_PTFE_Tube_Coupler_instructions.webp?v=1757104157"},"aspect_ratio":1.381,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_PTFE_Tube_Coupler_instructions.webp?v=1757104157","width":1450}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eOverview\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThe PTFE Tube Coupler is a component used to connect the PTFE tube, which is mounted on the back of the printer and used to connect the PTFE tube between the buffer and the tool head.\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eX1 Series and P1 Series\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eLearn more about the replacement of the PTFE Tube Coupler (w\/o holder) on \u003ca rel=\"noopener\" href=\"https:\/\/wiki.bambulab.com\/en\/filament-acc\/acc\/replacing-the-pneumatic-connector\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cspan\u003eBambu Lab Wiki\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eLearn more about the replacement of the PTFE Tube Coupler (w\/ holder) on \u003cspan\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/wiki.bambulab.com\/en\/p1\/maintenance\/tube-anchor-assembly\" target=\"_blank\"\u003eBambu Lab Wiki\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eInstructions for use\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e1. The PTFE Tube Connector is designed with a clear direction of use, as shown in the figure below. Connect the PTFE tube from the buffer output to the IN end, and the PTFE tube from the tool head to the OUT end. It is important to note that reverse connections may cause material blockage, so it is essential to ensure that the installation direction is correct.\u003c\/p\u003e\n\u003cp\u003e2. When AMS is not being used, it is necessary to remove the feed tube connector from the OUT end, disconnect the connection between the feed tube connector and the PTFE tube of the tool head, and directly insert the consumable material wire into the PTFE tube of the tool head.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/store.bblcdn.com\/s5\/default\/ad2779e67431450b92c2884a52a670ab.png\" alt=\"PTFE Tube Connector\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/store.bblcdn.com\/s5\/default\/13a247a2a73e4914a53234a05da79116.png\" alt=\"PTFE Tube Connector\"\u003e\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ch3 class=\"pct_st\"\u003eProduct Specification\u003c\/h3\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eQuantity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e3 pcs\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eMaterials\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003ePlastic, metal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003ePackage weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e25 g\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003ePackage Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e190*70*50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e"}

{"id":9007567339756,"title":"Bambu Lab H2 PTFE Tube Coupler","handle":"h2-ptfe-tube-coupler","description":"\u003ch3\u003eOverview\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThe PTFE Tube Coupler is used to secure the PTFE tube and connect the PTFE tube between the buffer and the tool head.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eLearn more about the H2 PTFE Tube Coupler on \u003ca href=\"https:\/\/e.bambulab.com\/t?c=g0yiaQEyNZEx3YYW\" rel=\"noopener\" target=\"_blank\"\u003eBambu Lab Wiki\u003c\/a\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eIn the Box\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e- H2 PTFE Tube Coupler*1\u003c\/li\u003e\n\u003cli\u003e- BT3-5 Screw*1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eH2 Series\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ch3 class=\"pct_t\"\u003eProduct Specifications\u003c\/h3\u003e\n\u003cdiv class=\"pct_t-tb\"\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cb\u003eMaterials\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003ePlastic, Metal\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cb\u003ePackaging Size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e60*60*30 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eBlack, White\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cb\u003ePackaging Weight\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e 0.03 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","published_at":"2025-09-05T15:41:35-04:00","created_at":"2025-09-05T15:41:33-04:00","vendor":"Bambu Lab","type":"bambu Lab parts","tags":["Bambu Lab","Parts"],"price":1399,"price_min":1399,"price_max":1399,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":46796598214892,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"BBL-0H2-PTF-TUB-COU","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Bambu Lab H2 PTFE Tube Coupler","public_title":null,"options":["Default Title"],"price":1399,"weight":20,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6937285500861","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_H2_PTFE_Tube_Coupler_product_picture.webp?v=1757101278","\/\/www.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_H2_PTFE_Tube_Coupler_With_Screw.webp?v=1757101278"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_H2_PTFE_Tube_Coupler_product_picture.webp?v=1757101278","options":["Title"],"media":[{"alt":"Bambu Lab H2 PTFE Tube Coupler","id":35895336403180,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_H2_PTFE_Tube_Coupler_product_picture.webp?v=1757101278"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_H2_PTFE_Tube_Coupler_product_picture.webp?v=1757101278","width":1400},{"alt":"Bambu Lab H2 PTFE Tube Coupler With Screw","id":35895336468716,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_H2_PTFE_Tube_Coupler_With_Screw.webp?v=1757101278"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_H2_PTFE_Tube_Coupler_With_Screw.webp?v=1757101278","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eOverview\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThe PTFE Tube Coupler is used to secure the PTFE tube and connect the PTFE tube between the buffer and the tool head.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eLearn more about the H2 PTFE Tube Coupler on \u003ca href=\"https:\/\/e.bambulab.com\/t?c=g0yiaQEyNZEx3YYW\" rel=\"noopener\" target=\"_blank\"\u003eBambu Lab Wiki\u003c\/a\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eIn the Box\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e- H2 PTFE Tube Coupler*1\u003c\/li\u003e\n\u003cli\u003e- BT3-5 Screw*1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eH2 Series\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ch3 class=\"pct_t\"\u003eProduct Specifications\u003c\/h3\u003e\n\u003cdiv class=\"pct_t-tb\"\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cb\u003eMaterials\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003ePlastic, Metal\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cb\u003ePackaging Size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e60*60*30 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eBlack, White\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cb\u003ePackaging Weight\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e 0.03 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e"}

{"id":9007519564012,"title":"Bambu Lab Filament Buffer","handle":"bambu-lab-filament-buffer","description":"\u003ch3\u003eOverview\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThe Filament buffer is an accessory that is required in conjunction with a single AMS unit. Its function is to provide a buffering effect for the filament. The interface is 4-Pin cable with 3mm pitch with snap terminal input, 6-Pin cable with 3mm pitch open snap terminal output.\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eX1 Series, P1P\u003c\/p\u003e\n\u003ch3\u003eNote\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eFor multiple AMS units, the AMS Hub is required instead of the Filament buffer.\u003c\/p\u003e\n\u003ch3\u003eIn the Box\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eFilament buffer, 2x M3*21.5 screws\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ch3 class=\"pct_st\"\u003eProduct Specification\u003c\/h3\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eVoltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e24V\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eElectricity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eBelow 10mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003ePackage weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e50 g\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003ePackage size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e109*55*33 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eMaterials\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003ePlastics, PCBA\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eColor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eGray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","published_at":"2025-09-05T15:07:04-04:00","created_at":"2025-09-05T15:07:02-04:00","vendor":"Bambu Lab","type":"bambu Lab parts","tags":["Bambu Lab","Parts"],"price":3199,"price_min":3199,"price_max":3199,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":46796529664236,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"BBL-FLM-BUF-000-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Bambu Lab Filament Buffer","public_title":null,"options":["Default Title"],"price":3199,"weight":50,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6975337030843","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_Filament_Buffer_product_picture.webp?v=1757099079","\/\/www.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_Filament_Buffer_diagonal_view.webp?v=1757099098","\/\/www.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_Filament_Buffer_top_view.webp?v=1757099099","\/\/www.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_Filament_Buffer_Instructions_View.webp?v=1757099206"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_Filament_Buffer_product_picture.webp?v=1757099079","options":["Title"],"media":[{"alt":"Bambu Lab Filament Buffer","id":35894913269996,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_Filament_Buffer_product_picture.webp?v=1757099079"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_Filament_Buffer_product_picture.webp?v=1757099079","width":1400},{"alt":"Bambu Lab Filament Buffer diagonal view","id":35894913401068,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_Filament_Buffer_diagonal_view.webp?v=1757099098"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_Filament_Buffer_diagonal_view.webp?v=1757099098","width":1400},{"alt":"Bambu Lab Filament Buffer top view","id":35894913466604,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_Filament_Buffer_top_view.webp?v=1757099099"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_Filament_Buffer_top_view.webp?v=1757099099","width":1400},{"alt":"Bambu Lab Filament Buffer Instructions View","id":35894913433836,"position":4,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_Filament_Buffer_Instructions_View.webp?v=1757099206"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Bambu_Lab_Filament_Buffer_Instructions_View.webp?v=1757099206","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eOverview\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThe Filament buffer is an accessory that is required in conjunction with a single AMS unit. Its function is to provide a buffering effect for the filament. The interface is 4-Pin cable with 3mm pitch with snap terminal input, 6-Pin cable with 3mm pitch open snap terminal output.\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eX1 Series, P1P\u003c\/p\u003e\n\u003ch3\u003eNote\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eFor multiple AMS units, the AMS Hub is required instead of the Filament buffer.\u003c\/p\u003e\n\u003ch3\u003eIn the Box\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eFilament buffer, 2x M3*21.5 screws\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ch3 class=\"pct_st\"\u003eProduct Specification\u003c\/h3\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eVoltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e24V\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eElectricity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eBelow 10mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003ePackage weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e50 g\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003ePackage size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e109*55*33 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eMaterials\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003ePlastics, PCBA\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eColor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eGray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e"}

{"id":9007487254764,"title":"AMS 2 Pro Switching Adapter","handle":"ams-2-pro-switching-adapter","description":"\u003cp\u003eIf you need to dry the filaments in more than one AMS 2 Pro at the same time, you will need to use the Bambu Lab official Switching Adapter to power the additional AMS 2 Pro.\u003cbr\u003eIf the X1, P1, A1 series printer is used with the AMS 2 Pro and uses the AMS 2 Pro's drying function, each AMS 2 Pro requires an official Bambu Lab Switching Adapter to power it.\u003c\/p\u003e\n\u003cdiv class=\"pct_st-p\"\u003e\n\u003cdiv\u003e\n\u003ch3 class=\"pct_st\"\u003eFor H2D Printer：\u003c\/h3\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003e1. Connecting a Single AMS 2 Pro:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e- A single AMS 2 Pro can be powered and dried by the H2D printer directly, no additional Switching Adapter is required.\u003c\/p\u003e\n\u003cstrong\u003e2. Connecting multiple AMS 2 Pro units together:\u003c\/strong\u003e\n\u003cp\u003e\u003cbr\u003e- If the drying function is enabled for multiple units, each AMS 2 Pro requires its own Switching Adapter.\u003cbr\u003e- Even if only one unit is drying, the system power may automatically reduce, leading to insufficient drying. It is recommended to use a power adapter to ensure optimal drying performance.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003ch3\u003eFor X1\/P1 Series Printer:\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1. Drying Function Requirement:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cp\u003e- A power adapter must be used when enabling the drying function to ensure sufficient power.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2. Connecting multiple AMS 2 Pro units together:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e- If the drying function is enabled for multiple units, each AMS 2 Pro requires its own Switching Adapter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3. Non-Drying Function Use:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e- The Switching Adapter can be omitted if the drying function is\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003enot\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eused.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eNotes:\u003c\/h3\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe AMS 2 Pro is compatible with X1\/P1 series printers for multi-material printing. The filament drying feature for these older generation machines will be fulfilled through an OTA update by the end of April.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eLearn more about the AMS 2 Pro Switching Adapter on\u003cspan\u003e \u003c\/span\u003e\u003ca rel=\"noopener\" href=\"https:\/\/e.bambulab.com\/t?c=LkRnTysnmmoNx4KD\" target=\"_blank\"\u003eBambu Lab Wiki\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eIn the Box\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e- AMS 2 Pro Switching Adapter *1\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eAMS 2 Pro\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\n\u003cdiv\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cb\u003eMaterials\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003ePlastic, Metal\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cb\u003ePackaging Size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e192*110*60 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eBlack\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cb\u003ePackaging Weight\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e0.540 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2025-09-05T14:21:47-04:00","created_at":"2025-09-05T14:21:45-04:00","vendor":"Bambu Lab","type":"bambu Lab parts","tags":["Bambu Lab","Parts"],"price":4099,"price_min":4099,"price_max":4099,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":46796443123948,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"BBL-AMS-2PR-SWI-ADA","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"AMS 2 Pro Switching Adapter","public_title":null,"options":["Default Title"],"price":4099,"weight":510,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6977252429009","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/AMS_2_Pro_Switching_Adapter_product_picture.webp?v=1757096470"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/AMS_2_Pro_Switching_Adapter_product_picture.webp?v=1757096470","options":["Title"],"media":[{"alt":"AMS 2 Pro Switching Adapter","id":35894815588588,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/AMS_2_Pro_Switching_Adapter_product_picture.webp?v=1757096470"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/AMS_2_Pro_Switching_Adapter_product_picture.webp?v=1757096470","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eIf you need to dry the filaments in more than one AMS 2 Pro at the same time, you will need to use the Bambu Lab official Switching Adapter to power the additional AMS 2 Pro.\u003cbr\u003eIf the X1, P1, A1 series printer is used with the AMS 2 Pro and uses the AMS 2 Pro's drying function, each AMS 2 Pro requires an official Bambu Lab Switching Adapter to power it.\u003c\/p\u003e\n\u003cdiv class=\"pct_st-p\"\u003e\n\u003cdiv\u003e\n\u003ch3 class=\"pct_st\"\u003eFor H2D Printer：\u003c\/h3\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003e1. Connecting a Single AMS 2 Pro:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e- A single AMS 2 Pro can be powered and dried by the H2D printer directly, no additional Switching Adapter is required.\u003c\/p\u003e\n\u003cstrong\u003e2. Connecting multiple AMS 2 Pro units together:\u003c\/strong\u003e\n\u003cp\u003e\u003cbr\u003e- If the drying function is enabled for multiple units, each AMS 2 Pro requires its own Switching Adapter.\u003cbr\u003e- Even if only one unit is drying, the system power may automatically reduce, leading to insufficient drying. It is recommended to use a power adapter to ensure optimal drying performance.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003ch3\u003eFor X1\/P1 Series Printer:\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1. Drying Function Requirement:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cp\u003e- A power adapter must be used when enabling the drying function to ensure sufficient power.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2. Connecting multiple AMS 2 Pro units together:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e- If the drying function is enabled for multiple units, each AMS 2 Pro requires its own Switching Adapter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3. Non-Drying Function Use:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e- The Switching Adapter can be omitted if the drying function is\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003enot\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eused.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eNotes:\u003c\/h3\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe AMS 2 Pro is compatible with X1\/P1 series printers for multi-material printing. The filament drying feature for these older generation machines will be fulfilled through an OTA update by the end of April.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eLearn more about the AMS 2 Pro Switching Adapter on\u003cspan\u003e \u003c\/span\u003e\u003ca rel=\"noopener\" href=\"https:\/\/e.bambulab.com\/t?c=LkRnTysnmmoNx4KD\" target=\"_blank\"\u003eBambu Lab Wiki\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eIn the Box\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e- AMS 2 Pro Switching Adapter *1\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eAMS 2 Pro\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\n\u003cdiv\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cb\u003eMaterials\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003ePlastic, Metal\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cb\u003ePackaging Size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e192*110*60 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eBlack\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cb\u003ePackaging Weight\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e0.540 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}

{"id":9007467397356,"title":"PTFE Tubes for P1S \u0026 X1C","handle":"ptfe-tubes-for-p1s-x1c","description":"\u003cp\u003eThe function of PTFE Tube is to reduce resistance and guide filament. The tube’s inner diameter is 2.5mm, and its outer diameter is 4mm.\u003c\/p\u003e\n\u003cp\u003ePlease note that the PTFE tubes are consumables and are at risk of wear, as they may rub against the filament over time. We recommend that you check the PTFE tubes for wear during your maintenance of the machine.\u003c\/p\u003e\n\u003cp\u003eIf the tubes are worn and not replaced in time, this may lead to feeding failures, filament accumulation inside the AMS, etc.\u003c\/p\u003e\n\u003ch3 class=\"pct_st\"\u003eIn the box\u003c\/h3\u003e\n\u003cp class=\"pct_p\"\u003ePTFE Tube\u003c\/p\u003e\n\u003ch3 class=\"pct_st\"\u003eInstallation\u003c\/h3\u003e\n\u003cp class=\"pct_p\"\u003eLearn more about the replacement of the\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003ePTFE Tube \u003c\/span\u003eon Bambu Lab Wiki:\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e\u003ca rel=\"noopener\" href=\"https:\/\/wiki.bambulab.com\/en\/x1\/maintenance\/replace-ptfe-tube\" target=\"_blank\"\u003eX1 Series\/P1 Series\/AMS\u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e,\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003e\u003ca rel=\"noopener\" href=\"https:\/\/wiki.bambulab.com\/en\/a1-mini\/maintenance\/ptfe-tube\" target=\"_blank\"\u003eA1 Series\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"pct_p\"\u003e\u003cspan\u003eMaintenance guide: \u003cstrong\u003e\u003ca href=\"https:\/\/wiki.bambulab.com\/en\/ams\/troubleshooting\/ptfe-damage-in-AMS\" rel=\"noopener\" target=\"_blank\"\u003eBambu Lab wiki\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5 class=\"pct_p\"\u003e\u003cspan\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h5\u003e\n\u003ch3 class=\"pct_st\"\u003eProduct Specification\u003c\/h3\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eProduct Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e20 g\/80 g\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003ePackaging Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e200*145*5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003ePTFE\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eColor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eWhite\/Grey\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","published_at":"2025-09-05T13:36:10-04:00","created_at":"2025-09-05T13:36:08-04:00","vendor":"Bambu Lab","type":"bambu Lab parts","tags":["Bambu Lab","Parts"],"price":599,"price_min":599,"price_max":599,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":46796387877100,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"BBL-PTF-TUB-P1S-X1C","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"PTFE Tubes for P1S \u0026 X1C","public_title":null,"options":["Default Title"],"price":599,"weight":100,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6975337030867","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/PTFE_Tubes_product_picture.webp?v=1757093697"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/PTFE_Tubes_product_picture.webp?v=1757093697","options":["Title"],"media":[{"alt":"PTFE Tubes","id":35894715220204,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/PTFE_Tubes_product_picture.webp?v=1757093697"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/PTFE_Tubes_product_picture.webp?v=1757093697","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThe function of PTFE Tube is to reduce resistance and guide filament. The tube’s inner diameter is 2.5mm, and its outer diameter is 4mm.\u003c\/p\u003e\n\u003cp\u003ePlease note that the PTFE tubes are consumables and are at risk of wear, as they may rub against the filament over time. We recommend that you check the PTFE tubes for wear during your maintenance of the machine.\u003c\/p\u003e\n\u003cp\u003eIf the tubes are worn and not replaced in time, this may lead to feeding failures, filament accumulation inside the AMS, etc.\u003c\/p\u003e\n\u003ch3 class=\"pct_st\"\u003eIn the box\u003c\/h3\u003e\n\u003cp class=\"pct_p\"\u003ePTFE Tube\u003c\/p\u003e\n\u003ch3 class=\"pct_st\"\u003eInstallation\u003c\/h3\u003e\n\u003cp class=\"pct_p\"\u003eLearn more about the replacement of the\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003ePTFE Tube \u003c\/span\u003eon Bambu Lab Wiki:\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e\u003ca rel=\"noopener\" href=\"https:\/\/wiki.bambulab.com\/en\/x1\/maintenance\/replace-ptfe-tube\" target=\"_blank\"\u003eX1 Series\/P1 Series\/AMS\u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e,\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003e\u003ca rel=\"noopener\" href=\"https:\/\/wiki.bambulab.com\/en\/a1-mini\/maintenance\/ptfe-tube\" target=\"_blank\"\u003eA1 Series\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"pct_p\"\u003e\u003cspan\u003eMaintenance guide: \u003cstrong\u003e\u003ca href=\"https:\/\/wiki.bambulab.com\/en\/ams\/troubleshooting\/ptfe-damage-in-AMS\" rel=\"noopener\" target=\"_blank\"\u003eBambu Lab wiki\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5 class=\"pct_p\"\u003e\u003cspan\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h5\u003e\n\u003ch3 class=\"pct_st\"\u003eProduct Specification\u003c\/h3\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eProduct Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e20 g\/80 g\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003ePackaging Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e200*145*5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003ePTFE\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eColor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eWhite\/Grey\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e"}

{"id":9006111752428,"title":"Soft Tissue Starter Pack (Form 2 \u0026 3B)","handle":"soft-tissue-starter-pack-form-2-3b","description":"\u003cp\u003e\u003cspan\u003eSoft Tissue Starter Pack enables you to create your own Soft Tissue Resin in customizable dark, medium, and light pink shades to 3D print flexible gingiva masks for use in combination with rigid dental models to confidently check implant prosthetics by adding removable soft tissue components to your model production.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eMagenta Color Pigment, Yellow Color Pigment, and White Color Pigment can also be purchased separately.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003ca href=\"https:\/\/dental.formlabs.com\/indications\/restorative-models\/implant-models-guide\/\"\u003eRead Formlabs Application Guide\u003c\/a\u003e\u003cspan\u003e to learn the complete digital workflow and best practices for making 3D printed gingiva masks on your Formlabs 3D printer.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 class=\"Header_headerText__erapV Header_as-h5__AoVAf Header_weight-700__NTHpg Header_light__j0TFO Header_black__hPDhZ\"\u003eApplications\u003c\/h2\u003e\n\u003cdiv class=\"TextPlugin_light__vLNDo TextPlugin_text-plugin__3BZXB TextPlugin_theme__WsfWn\"\u003e\n\u003cp\u003eSoft Tissue Starter Pack empowers dental laboratories to print gingiva masks for implant models and other soft tissue models on a Formlabs printer.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_grid-x__4_9U0 Grid_stretch__5egKO\"\u003e\n\u003cdiv class=\"Grid_cell__eGJcU light Grid_small-24__mVfzj Grid_medium-12__Uwabx Grid_large-12__uleAP Grid_small-offset-0__sBRvM Grid_medium-offset-0__6pMXY Grid_large-offset-0__dU9_M\"\u003e\n\u003cdiv class=\"CheckmarkList_list-container__YgcKN\"\u003e\n\u003cdiv class=\"CheckmarkList_columns-1__2uQWd CheckmarkList_margin-vertical-2__hZQyt CheckmarkList_item__hi0M8 CheckmarkList_font-size-0__tjnxT light\"\u003e\n\u003cul\u003e\n\u003cli\u003eMinimize chairside adjustment time\u003c\/li\u003e\n\u003cli\u003eConsistently check implant prosthetics\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"Grid_section__Jo_y7 light\" id=\"headline\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"Grid_section__hLX0Q light\"\u003e\n\u003cdiv class=\"Grid_grid-x__rSPX7 Grid_grid-margin-x__MQ6jY Grid_stretch__DdkNX\"\u003e\n\u003cdiv class=\"Grid_cell__eQjhu light Grid_small-24__Mhk86 Grid_medium-8__l_c_L Grid_large-8__3LN_a Grid_small-offset-0__RgpwR Grid_medium-offset-8__6cv87 Grid_large-offset-8__As2G7\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"CombinedHeadlines_removeMarginChildren__POo4I\"\u003e\n\u003ch2 class=\"Header_headerText__erapV Header_as-h4__Y2Ob8 Header_weight-700__NTHpg Header_light__j0TFO Header_light-primary__XUSia\"\u003eMaterial Properties\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_section__hLX0Q Grid_grid-container__oSf0V\" id=\"dental-lt clear resin (v2)\"\u003e\n\u003cdiv class=\"ComparisonTable_comparison-table__Oz3pO ComparisonTable_columns-1__3mh79\"\u003e\n\u003cdiv class=\"ComparisonTable_table-column__e5YQa ComparisonTable_col-1__1GCYC ComparisonTable_light__rcwd2\"\u003e\n\u003cdiv class=\"ComparisonTable_column-data__cPOUZ ComparisonTable_row-1__dscBS ComparisonTable_drop-down__dJqor\"\u003e\n\u003cp class=\"ComparisonTable_column-title__4cbif\"\u003e\u003cstrong\u003eSoft Tissue Starter Pack (Flexible 80A Resin)\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ComparisonTable_column-data__cPOUZ ComparisonTable_grey__26PkO ComparisonTable_first__TXWNG ComparisonTable_center__aI5jg\"\u003e\n\u003cdiv class=\"ComparisonTable_grid-content__Xjf2z ComparisonTable_middle__N3Dhz\"\u003e\n\u003cul\u003e\n\u003cli class=\"ComparisonTable_label__cnfrm\"\u003eUltimate Tensile Strength\u003cbr\u003e8.9 MPa\u003c\/li\u003e\n\u003cli class=\"ComparisonTable_label__cnfrm\"\u003eElongation\u003cbr\u003e120%\u003c\/li\u003e\n\u003cli class=\"ComparisonTable_label__cnfrm\"\u003eCompression Set (23 °C for 22 hours)\u003cbr\u003e3%\u003c\/li\u003e\n\u003cli class=\"ComparisonTable_label__cnfrm\"\u003eShore Hardness\u003cbr\u003e80A\u003c\/li\u003e\n\u003cli class=\"ComparisonTable_label__cnfrm\"\u003eBayshore Resilience\u003cbr\u003e28%\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca class=\"Button_icon__0AiX_ Button_icon-pdf__1GD_8 Button_none__YiwlJ Button_dark__k2aro\" href=\"https:\/\/dental-media.formlabs.com\/datasheets\/2001499-TDS-ENUS-0.pdf\" target=\"_blank\"\u003e\u003cspan class=\"Button_content__YkUyD\"\u003e\u003cspan\u003eDownload Soft Tissue Technical Data Sheet\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2025-09-05T08:47:15-04:00","created_at":"2025-09-04T11:43:17-04:00","vendor":"Formlabs","type":"Formlabs Resins","tags":["Form 2 \u0026 3","formlabs","resin"],"price":38467,"price_min":38467,"price_max":38467,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":46792291090668,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"FLB-RSN-SFT-TSE-SPK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Soft Tissue Starter Pack (Form 2 \u0026 3B)","public_title":null,"options":["Default Title"],"price":38467,"weight":2230,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"811294031638","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/Soft_Tissue_Starter_Pack_Form_2_and_3_product_picture.webp?v=1757000201","\/\/www.voxelfactory.com\/cdn\/shop\/files\/Soft_Tissue_Starter_Pack_Form_2_and_3B_Printed_Parts.webp?v=1757076680","\/\/www.voxelfactory.com\/cdn\/shop\/files\/Teeth_Soft_Tissue_Starter_Pack_Form_2_and_3_product_picture.webp?v=1757001942"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Soft_Tissue_Starter_Pack_Form_2_and_3_product_picture.webp?v=1757000201","options":["Title"],"media":[{"alt":"Soft Tissue Starter Pack Form 2 and 3","id":35890746392812,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Soft_Tissue_Starter_Pack_Form_2_and_3_product_picture.webp?v=1757000201"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Soft_Tissue_Starter_Pack_Form_2_and_3_product_picture.webp?v=1757000201","width":1400},{"alt":"Soft Tissue Starter Pack Form 2 and 3B Printed Parts","id":35890800099564,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Soft_Tissue_Starter_Pack_Form_2_and_3B_Printed_Parts.webp?v=1757076680"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Soft_Tissue_Starter_Pack_Form_2_and_3B_Printed_Parts.webp?v=1757076680","width":1400},{"alt":"Teeth Soft Tissue Starter Pack Form 2 and 3","id":35890797314284,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Teeth_Soft_Tissue_Starter_Pack_Form_2_and_3_product_picture.webp?v=1757001942"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Teeth_Soft_Tissue_Starter_Pack_Form_2_and_3_product_picture.webp?v=1757001942","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003eSoft Tissue Starter Pack enables you to create your own Soft Tissue Resin in customizable dark, medium, and light pink shades to 3D print flexible gingiva masks for use in combination with rigid dental models to confidently check implant prosthetics by adding removable soft tissue components to your model production.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eMagenta Color Pigment, Yellow Color Pigment, and White Color Pigment can also be purchased separately.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003ca href=\"https:\/\/dental.formlabs.com\/indications\/restorative-models\/implant-models-guide\/\"\u003eRead Formlabs Application Guide\u003c\/a\u003e\u003cspan\u003e to learn the complete digital workflow and best practices for making 3D printed gingiva masks on your Formlabs 3D printer.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 class=\"Header_headerText__erapV Header_as-h5__AoVAf Header_weight-700__NTHpg Header_light__j0TFO Header_black__hPDhZ\"\u003eApplications\u003c\/h2\u003e\n\u003cdiv class=\"TextPlugin_light__vLNDo TextPlugin_text-plugin__3BZXB TextPlugin_theme__WsfWn\"\u003e\n\u003cp\u003eSoft Tissue Starter Pack empowers dental laboratories to print gingiva masks for implant models and other soft tissue models on a Formlabs printer.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_grid-x__4_9U0 Grid_stretch__5egKO\"\u003e\n\u003cdiv class=\"Grid_cell__eGJcU light Grid_small-24__mVfzj Grid_medium-12__Uwabx Grid_large-12__uleAP Grid_small-offset-0__sBRvM Grid_medium-offset-0__6pMXY Grid_large-offset-0__dU9_M\"\u003e\n\u003cdiv class=\"CheckmarkList_list-container__YgcKN\"\u003e\n\u003cdiv class=\"CheckmarkList_columns-1__2uQWd CheckmarkList_margin-vertical-2__hZQyt CheckmarkList_item__hi0M8 CheckmarkList_font-size-0__tjnxT light\"\u003e\n\u003cul\u003e\n\u003cli\u003eMinimize chairside adjustment time\u003c\/li\u003e\n\u003cli\u003eConsistently check implant prosthetics\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"Grid_section__Jo_y7 light\" id=\"headline\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"Grid_section__hLX0Q light\"\u003e\n\u003cdiv class=\"Grid_grid-x__rSPX7 Grid_grid-margin-x__MQ6jY Grid_stretch__DdkNX\"\u003e\n\u003cdiv class=\"Grid_cell__eQjhu light Grid_small-24__Mhk86 Grid_medium-8__l_c_L Grid_large-8__3LN_a Grid_small-offset-0__RgpwR Grid_medium-offset-8__6cv87 Grid_large-offset-8__As2G7\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"CombinedHeadlines_removeMarginChildren__POo4I\"\u003e\n\u003ch2 class=\"Header_headerText__erapV Header_as-h4__Y2Ob8 Header_weight-700__NTHpg Header_light__j0TFO Header_light-primary__XUSia\"\u003eMaterial Properties\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Grid_section__hLX0Q Grid_grid-container__oSf0V\" id=\"dental-lt clear resin (v2)\"\u003e\n\u003cdiv class=\"ComparisonTable_comparison-table__Oz3pO ComparisonTable_columns-1__3mh79\"\u003e\n\u003cdiv class=\"ComparisonTable_table-column__e5YQa ComparisonTable_col-1__1GCYC ComparisonTable_light__rcwd2\"\u003e\n\u003cdiv class=\"ComparisonTable_column-data__cPOUZ ComparisonTable_row-1__dscBS ComparisonTable_drop-down__dJqor\"\u003e\n\u003cp class=\"ComparisonTable_column-title__4cbif\"\u003e\u003cstrong\u003eSoft Tissue Starter Pack (Flexible 80A Resin)\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ComparisonTable_column-data__cPOUZ ComparisonTable_grey__26PkO ComparisonTable_first__TXWNG ComparisonTable_center__aI5jg\"\u003e\n\u003cdiv class=\"ComparisonTable_grid-content__Xjf2z ComparisonTable_middle__N3Dhz\"\u003e\n\u003cul\u003e\n\u003cli class=\"ComparisonTable_label__cnfrm\"\u003eUltimate Tensile Strength\u003cbr\u003e8.9 MPa\u003c\/li\u003e\n\u003cli class=\"ComparisonTable_label__cnfrm\"\u003eElongation\u003cbr\u003e120%\u003c\/li\u003e\n\u003cli class=\"ComparisonTable_label__cnfrm\"\u003eCompression Set (23 °C for 22 hours)\u003cbr\u003e3%\u003c\/li\u003e\n\u003cli class=\"ComparisonTable_label__cnfrm\"\u003eShore Hardness\u003cbr\u003e80A\u003c\/li\u003e\n\u003cli class=\"ComparisonTable_label__cnfrm\"\u003eBayshore Resilience\u003cbr\u003e28%\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca class=\"Button_icon__0AiX_ Button_icon-pdf__1GD_8 Button_none__YiwlJ Button_dark__k2aro\" href=\"https:\/\/dental-media.formlabs.com\/datasheets\/2001499-TDS-ENUS-0.pdf\" target=\"_blank\"\u003e\u003cspan class=\"Button_content__YkUyD\"\u003e\u003cspan\u003eDownload Soft Tissue Technical Data Sheet\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}

{"id":9003563876588,"title":"Black Resin V5 5L (Form 4)","handle":"black-resin-v5-5l-form-4","description":"\u003cp\u003eBlack Resin is an exceptionally rich, deep black General Purpose Resin, offering an optimal balance of fast print speed, high accuracy, presentation-ready appearance, strong mechanical properties, and an easy, reliable workflow.\u003c\/p\u003e\n\u003cp\u003eCreate parts that are stiff and strong with a surface finish that rivals injection molding. Black Resin has a rich, matte shade that captures fine features accurately.\u003c\/p\u003e\n\u003cp\u003eBlack Resin V5 is a new material formulation that leverages the Form 4 Series to print three times faster than the previous version, while offering improved mechanical properties.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy Choose Black Resin?\u003c\/strong\u003e\u003cbr\u003eBlack Resin V5 is a versatile 3D printing resin formulated to leverage the new Form 4 ecosystem, offering an optimal balance of fast print speed, high accuracy, presentation-ready appearance, strong mechanical properties, and an easy, reliable workflow.\u003c\/p\u003e\n\u003cp\u003eHigh Dimensional Accuracy\u003cbr\u003eAchieve precise tolerances and fine features.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eSuperior Aesthetics\u003cbr\u003eRival the appearance of injection-molded parts with rich, matte color and crisp fine feature performance.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eVersatile Mechanical Properties\u003cbr\u003eCreate parts with the optimal balance of strength, toughness, and stiffness for a wide range of applications.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eExtremely Low-Odor Printing\u003cbr\u003ePrint with ultra-low volatile organic compounds (VOCs) for a pleasant and comfortable user experience.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eMechanical Properties\u003cbr\u003ePost-cured at room temperature for 5 minutes\u003c\/p\u003e\n\u003cp\u003eUltimate Tensile Strength\u003c\/p\u003e\n\u003cp\u003e57 MPa\u003cbr\u003eTensile Modulus\u003c\/p\u003e\n\u003cp\u003e2450 MPa\u003cbr\u003eElongation at Break\u003c\/p\u003e\n\u003cp\u003e14%\u003cbr\u003eFlexural Strength\u003c\/p\u003e\n\u003cp\u003e91 MPa\u003cbr\u003eFlexural Modulus\u003c\/p\u003e\n\u003cp\u003e2450 MPa\u003cbr\u003eNotched Izod\u003c\/p\u003e\n\u003cp\u003e29 J\/m\u003cbr\u003eHeat Deflection Temperature at 0.45 MPa\u003c\/p\u003e\n\u003cp\u003e61 °C\u003cbr\u003ePost-cured at 60 °C for 15 minutes\u003c\/p\u003e\n\u003cp\u003eUltimate Tensile Strength\u003c\/p\u003e\n\u003cp\u003e61 MPa\u003cbr\u003eTensile Modulus\u003c\/p\u003e\n\u003cp\u003e2700 MPa\u003cbr\u003eElongation at Break\u003c\/p\u003e\n\u003cp\u003e10%\u003cbr\u003eFlexural Strength\u003c\/p\u003e\n\u003cp\u003e103 MPa\u003cbr\u003eFlexural Modulus\u003c\/p\u003e\n\u003cp\u003e2750 MPa\u003cbr\u003eNotched Izod\u003c\/p\u003e\n\u003cp\u003e29 J\/m\u003cbr\u003eHeat Deflection Temperature at 0.45 MPa\u003c\/p\u003e\n\u003cp\u003e69 °C\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ePost-Processing\u003cbr\u003eWash Settings\u003cbr\u003eDuration\u003cbr\u003e5 minutes\u003c\/p\u003e\n\u003cp\u003eNotes\u003cbr\u003eStart with a 5-minute wash and modify the wash time based on your part geometry and solvent purity.\u003c\/p\u003e\n\u003cp\u003eCure Settings\u003cbr\u003eDefault\u003cbr\u003e5 minutes at room temperature\u003c\/p\u003e\n\u003cp\u003eEnhanced\u003cbr\u003e15 minutes at 60 °C\u003c\/p\u003e\n\u003cp\u003eNotes\u003cbr\u003ePost-curing is optional for parts printed in Black Resin V5. However, we recommend either a 5-minute room temperature cure to reduce surface tack and improve mechanical properties, or a 15-minute cure at 60 °C for the highest strength, stiffness, and heat deflection temperature.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/media.formlabs.com\/m\/44db0c354678d098\/original\/-ENUS-Black-Resin-V5-TDS.pdf\" class=\"Button_icon__0AiX_ Button_icon-pdf__1GD_8 Button_none__YiwlJ Button_dark__k2aro\" target=\"_blank\"\u003e\u003cspan class=\"Button_content__YkUyD\"\u003e\u003cspan\u003eDownload the Black Resin V5 Technical Data Sheet\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","published_at":"2025-09-02T15:00:13-04:00","created_at":"2025-09-02T13:31:38-04:00","vendor":"Formlabs","type":"Formlabs Resins","tags":["Form 4","formlabs","resin"],"price":46475,"price_min":46475,"price_max":46475,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":46783584501996,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"FLB-RSN-05L-BLK-0V5","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Black Resin V5 5L (Form 4)","public_title":null,"options":["Default Title"],"price":46475,"weight":7500,"compare_at_price":null,"inventory_quantity":-8,"inventory_management":"shopify","inventory_policy":"deny","barcode":"811294036824","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/Black_Resin_V5_Form_4_5_L_product_picture.webp?v=1756835187","\/\/www.voxelfactory.com\/cdn\/shop\/files\/Black_Resin_V5_Form_4_5_L_3D_Model_product_picture.webp?v=1756835283"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Black_Resin_V5_Form_4_5_L_product_picture.webp?v=1756835187","options":["Title"],"media":[{"alt":"Black Resin V5 Form 4 5 L product picture","id":35881482191084,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Black_Resin_V5_Form_4_5_L_product_picture.webp?v=1756835187"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Black_Resin_V5_Form_4_5_L_product_picture.webp?v=1756835187","width":1400},{"alt":"Black Resin V5 Form 4 5 L 3D Model product picture","id":35881483960556,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Black_Resin_V5_Form_4_5_L_3D_Model_product_picture.webp?v=1756835283"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Black_Resin_V5_Form_4_5_L_3D_Model_product_picture.webp?v=1756835283","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eBlack Resin is an exceptionally rich, deep black General Purpose Resin, offering an optimal balance of fast print speed, high accuracy, presentation-ready appearance, strong mechanical properties, and an easy, reliable workflow.\u003c\/p\u003e\n\u003cp\u003eCreate parts that are stiff and strong with a surface finish that rivals injection molding. Black Resin has a rich, matte shade that captures fine features accurately.\u003c\/p\u003e\n\u003cp\u003eBlack Resin V5 is a new material formulation that leverages the Form 4 Series to print three times faster than the previous version, while offering improved mechanical properties.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy Choose Black Resin?\u003c\/strong\u003e\u003cbr\u003eBlack Resin V5 is a versatile 3D printing resin formulated to leverage the new Form 4 ecosystem, offering an optimal balance of fast print speed, high accuracy, presentation-ready appearance, strong mechanical properties, and an easy, reliable workflow.\u003c\/p\u003e\n\u003cp\u003eHigh Dimensional Accuracy\u003cbr\u003eAchieve precise tolerances and fine features.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eSuperior Aesthetics\u003cbr\u003eRival the appearance of injection-molded parts with rich, matte color and crisp fine feature performance.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eVersatile Mechanical Properties\u003cbr\u003eCreate parts with the optimal balance of strength, toughness, and stiffness for a wide range of applications.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eExtremely Low-Odor Printing\u003cbr\u003ePrint with ultra-low volatile organic compounds (VOCs) for a pleasant and comfortable user experience.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eMechanical Properties\u003cbr\u003ePost-cured at room temperature for 5 minutes\u003c\/p\u003e\n\u003cp\u003eUltimate Tensile Strength\u003c\/p\u003e\n\u003cp\u003e57 MPa\u003cbr\u003eTensile Modulus\u003c\/p\u003e\n\u003cp\u003e2450 MPa\u003cbr\u003eElongation at Break\u003c\/p\u003e\n\u003cp\u003e14%\u003cbr\u003eFlexural Strength\u003c\/p\u003e\n\u003cp\u003e91 MPa\u003cbr\u003eFlexural Modulus\u003c\/p\u003e\n\u003cp\u003e2450 MPa\u003cbr\u003eNotched Izod\u003c\/p\u003e\n\u003cp\u003e29 J\/m\u003cbr\u003eHeat Deflection Temperature at 0.45 MPa\u003c\/p\u003e\n\u003cp\u003e61 °C\u003cbr\u003ePost-cured at 60 °C for 15 minutes\u003c\/p\u003e\n\u003cp\u003eUltimate Tensile Strength\u003c\/p\u003e\n\u003cp\u003e61 MPa\u003cbr\u003eTensile Modulus\u003c\/p\u003e\n\u003cp\u003e2700 MPa\u003cbr\u003eElongation at Break\u003c\/p\u003e\n\u003cp\u003e10%\u003cbr\u003eFlexural Strength\u003c\/p\u003e\n\u003cp\u003e103 MPa\u003cbr\u003eFlexural Modulus\u003c\/p\u003e\n\u003cp\u003e2750 MPa\u003cbr\u003eNotched Izod\u003c\/p\u003e\n\u003cp\u003e29 J\/m\u003cbr\u003eHeat Deflection Temperature at 0.45 MPa\u003c\/p\u003e\n\u003cp\u003e69 °C\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ePost-Processing\u003cbr\u003eWash Settings\u003cbr\u003eDuration\u003cbr\u003e5 minutes\u003c\/p\u003e\n\u003cp\u003eNotes\u003cbr\u003eStart with a 5-minute wash and modify the wash time based on your part geometry and solvent purity.\u003c\/p\u003e\n\u003cp\u003eCure Settings\u003cbr\u003eDefault\u003cbr\u003e5 minutes at room temperature\u003c\/p\u003e\n\u003cp\u003eEnhanced\u003cbr\u003e15 minutes at 60 °C\u003c\/p\u003e\n\u003cp\u003eNotes\u003cbr\u003ePost-curing is optional for parts printed in Black Resin V5. However, we recommend either a 5-minute room temperature cure to reduce surface tack and improve mechanical properties, or a 15-minute cure at 60 °C for the highest strength, stiffness, and heat deflection temperature.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/media.formlabs.com\/m\/44db0c354678d098\/original\/-ENUS-Black-Resin-V5-TDS.pdf\" class=\"Button_icon__0AiX_ Button_icon-pdf__1GD_8 Button_none__YiwlJ Button_dark__k2aro\" target=\"_blank\"\u003e\u003cspan class=\"Button_content__YkUyD\"\u003e\u003cspan\u003eDownload the Black Resin V5 Technical Data Sheet\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e"}

{"id":8997334253804,"title":"Ultimaker S6 3D Printer","handle":"ultimaker-s6-3d-printer","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eIntroducing UltiMaker S6, building directly on the great legacy of the UltiMaker S5, the S6 retains all its cherished versatility and modularity. We’ve added powerful innovations like the UltiMaker Cheetah motion planner, improved bed leveling, the new dual drive feeder and a flexible build plate. Delivering S8-like productivity gains of up to 4× over its predecessor, ensuring reliability remains paramount.\u003c\/p\u003e\n\u003cp\u003eProven versatility of the S5: Enhanced in the UltiMaker S6 to achieve up to 4× productivity. Iterate designs faster and bring innovations to market quicker, backed by dependable performance and new features like the flex plate.\u003c\/p\u003e\n\u003cp\u003eEffortless professional 3D printing: Designed to be the most easy and accessible way to utilize the UltiMaker ecosystem – from advanced materials to Digital Factory and Cura Cloud – streamlining your workflow.\u003c\/p\u003e\n\u003cp\u003eReliable high output: Achieve up to 4× the output without compromising on reliability. Features like improved bed leveling and the optional flex plate reduce print failures and simplify part removal.\u003c\/p\u003e\n\u003cp\u003eHigh speed printing: Blends S5 versatility with Cheetah motion, improved leveling, flex plate, and seamless cloud integration for accessible, fast printing. Seamlessly connected to Cura Cloud and Digital Factory for an accessible, high-speed printing experience.\u003c\/p\u003e\n\u003cp\u003eUnmatched modularity: Full accessory compatibility ensures a smooth transition, all at a more accessible price point. The S6 achieves up to 4× the output without compromizing on reliability.\u003c\/p\u003e\n\u003cp\u003eEasy UltiMaker access: The UltiMaker S6 is your most straightforward and accessible entry point into the comprehensive UltiMaker ecosystem. Get up to 4× productivity, hundreds of materials, and powerful tools like Cura Cloud and UltiMaker Digital Factory, all within easier reach.\u003c\/p\u003e\n\u003cp\u003eUncompromized reliability: Like its bigger brother the S8, the UltiMaker S6 achieves up to 4× the productivity of the S5, without compromising on the reliability UltiMaker is known for. This leap in performance is now more accessible, empowering more users.\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003ch3\u003eDimensions \u0026amp; Weight\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 495 × 585 × 780 mm (~19.5 × 23 × 30.7 in) (inc. spool holder)\u003c\/li\u003e\n\u003cli\u003eWeight: 25 kg (55 lbs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrinting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTechnology : Fused deposition modeling (FDM)\u003c\/li\u003e\n\u003cli\u003ePrint head: Dual-extrusion print head with a unique auto nozzle-lifting system, flood detection and inductive probing\u003c\/li\u003e\n\u003cli\u003eFeeder type: Dual gripper feeder with tension adjustment, release functionality and filament feed-rate control\u003c\/li\u003e\n\u003cli\u003eMotion planner: Smooth, precise 3D printing with UltiMaker Cheetah. The world's first and only jerk limited motion planner, with third order continuous, smooth motion, and corner blending algorithm\u003c\/li\u003e\n\u003cli\u003eFilament diameter: 2.85 mm\u003c\/li\u003e\n\u003cli\u003eCompatible print cores: AA+ 0.4 (included), CC+ 0.4, BB 0.4, 0.8 and DD 0.4 (sold separately) *Legacy AA and CC print cores can be used in combination with pre-sliced print jobs.\u003c\/li\u003e\n\u003cli\u003eNozzle temperature: Up to 340°C (572 °F)\u003c\/li\u003e\n\u003cli\u003eDimensional accuracy: ± 0.15 mm ± 0.15% feature nominal length* *Typical accuracy based on selected geometries, materials, and randomly selected machines\u003c\/li\u003e\n\u003cli\u003eBuild plate: Heated flexible PEI build plate (Up to 120 °C (248 °F)) or heated glass build plate (20 - 120 °C)\u003c\/li\u003e\n\u003cli\u003eBuild volume (XYZ): 330 × 240 × 300 mm (~13 × 9.4 × 11.8 in)\u003c\/li\u003e\n\u003cli\u003eLayer resolution: 60 - 400 microns (depending on the print core nozzle size and print profile)\u003c\/li\u003e\n\u003cli\u003eExtrusion flow: Up to 35 mm3\/s\u003c\/li\u003e\n\u003cli\u003eXY speed, acceleration, jerk: Up to 500 mm\/s, up to 50.000 mm\/s2, up to 100.000.000 mm\/s3\u003c\/li\u003e\n\u003cli\u003eMaterial handling: Dual spool holder with NFC recognition\u003c\/li\u003e\n\u003cli\u003eOperating sound: \u0026lt; 50 dBA\u003c\/li\u003e\n\u003cli\u003eDisplay: Fast responsive color touchscreen\u003c\/li\u003e\n\u003cli\u003eMonitoring: HD camera\u003c\/li\u003e\n\u003cli\u003eSystem on module: ARM cortex quadcore at 1.8 GHz\u003c\/li\u003e\n\u003cli\u003eReal-time controller: 600 MHz Arm-cortex M7\u003c\/li\u003e\n\u003cli\u003eConnectivity: Wi-Fi 2.4 \u0026amp; 5 GHz: IEEE 802.11a\/b\/g\/n\/ac. LAN: Gigabit Ethernet. USB: 2.0\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAmbient conditions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOperating temperature: 15 - 32 °C (59 - 90 °F), 10 - 90 % RH non-condensing\u003c\/li\u003e\n\u003cli\u003eNon-operating temperature: 0 - 32 °C (32 - 90 °F), 10 - 90 % RH non-condensing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSoftware\u003c\/h5\u003e\n\u003ch3\u003ePrint preparation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" href=\"https:\/\/ultimaker.com\/software\/ultimaker-cura\/\" target=\"_blank\"\u003eUltiMaker Cura 5.10.1 or newer\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eCura Cloud (no installation required)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrinter management\u003c\/h3\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/ultimaker.com\/software\/ultimaker-digital-factory\/\" target=\"_blank\"\u003eUltiMaker Digital Factory\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003eSupported OS\u003c\/h3\u003e\n\u003cp\u003eWindows, MacOS, Linux\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003eMaterials\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eEasy to print\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltiMaker PLA\u003c\/li\u003e\n\u003cli\u003eUltiMaker Tough PLA\u003c\/li\u003e\n\u003cli\u003eUltiMaker PETG\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDurable\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltiMaker ABS\u003c\/li\u003e\n\u003cli\u003eUltiMaker CPE\u003c\/li\u003e\n\u003cli\u003eUltiMaker Nylon\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFlexible\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltiMaker TPU 95A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eReinforced composites\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltiMaker PET-CF\u003c\/li\u003e\n\u003cli\u003eUltiMaker Nylon CF Slide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHeat resistant\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltiMaker CPE+\u003c\/li\u003e\n\u003cli\u003eUltiMaker PC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSupport materials\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltiMaker PVA\u003c\/li\u003e\n\u003cli\u003eUltiMaker Breakaway\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2025-09-05T09:25:38-04:00","created_at":"2025-08-29T16:17:30-04:00","vendor":"Ultimaker","type":"Ultimaker 3D printers","tags":["2.85mm","Ultimaker 3D Printer","Ultimaker S6"],"price":1006433,"price_min":1006433,"price_max":1006433,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":46771641024748,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UMK-3DP-0S6-000-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Ultimaker S6 3D Printer","public_title":null,"options":["Default Title"],"price":1006433,"weight":29000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"810036967600","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/ultimaker_s6_3d_printer_product_picture.webp?v=1756497485"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/ultimaker_s6_3d_printer_product_picture.webp?v=1756497485","options":["Title"],"media":[{"alt":"Ultimaker S6 3D Printer","id":35856308371692,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/ultimaker_s6_3d_printer_product_picture.webp?v=1756497485"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/ultimaker_s6_3d_printer_product_picture.webp?v=1756497485","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eIntroducing UltiMaker S6, building directly on the great legacy of the UltiMaker S5, the S6 retains all its cherished versatility and modularity. We’ve added powerful innovations like the UltiMaker Cheetah motion planner, improved bed leveling, the new dual drive feeder and a flexible build plate. Delivering S8-like productivity gains of up to 4× over its predecessor, ensuring reliability remains paramount.\u003c\/p\u003e\n\u003cp\u003eProven versatility of the S5: Enhanced in the UltiMaker S6 to achieve up to 4× productivity. Iterate designs faster and bring innovations to market quicker, backed by dependable performance and new features like the flex plate.\u003c\/p\u003e\n\u003cp\u003eEffortless professional 3D printing: Designed to be the most easy and accessible way to utilize the UltiMaker ecosystem – from advanced materials to Digital Factory and Cura Cloud – streamlining your workflow.\u003c\/p\u003e\n\u003cp\u003eReliable high output: Achieve up to 4× the output without compromising on reliability. Features like improved bed leveling and the optional flex plate reduce print failures and simplify part removal.\u003c\/p\u003e\n\u003cp\u003eHigh speed printing: Blends S5 versatility with Cheetah motion, improved leveling, flex plate, and seamless cloud integration for accessible, fast printing. Seamlessly connected to Cura Cloud and Digital Factory for an accessible, high-speed printing experience.\u003c\/p\u003e\n\u003cp\u003eUnmatched modularity: Full accessory compatibility ensures a smooth transition, all at a more accessible price point. The S6 achieves up to 4× the output without compromizing on reliability.\u003c\/p\u003e\n\u003cp\u003eEasy UltiMaker access: The UltiMaker S6 is your most straightforward and accessible entry point into the comprehensive UltiMaker ecosystem. Get up to 4× productivity, hundreds of materials, and powerful tools like Cura Cloud and UltiMaker Digital Factory, all within easier reach.\u003c\/p\u003e\n\u003cp\u003eUncompromized reliability: Like its bigger brother the S8, the UltiMaker S6 achieves up to 4× the productivity of the S5, without compromising on the reliability UltiMaker is known for. This leap in performance is now more accessible, empowering more users.\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003ch3\u003eDimensions \u0026amp; Weight\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 495 × 585 × 780 mm (~19.5 × 23 × 30.7 in) (inc. spool holder)\u003c\/li\u003e\n\u003cli\u003eWeight: 25 kg (55 lbs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrinting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTechnology : Fused deposition modeling (FDM)\u003c\/li\u003e\n\u003cli\u003ePrint head: Dual-extrusion print head with a unique auto nozzle-lifting system, flood detection and inductive probing\u003c\/li\u003e\n\u003cli\u003eFeeder type: Dual gripper feeder with tension adjustment, release functionality and filament feed-rate control\u003c\/li\u003e\n\u003cli\u003eMotion planner: Smooth, precise 3D printing with UltiMaker Cheetah. The world's first and only jerk limited motion planner, with third order continuous, smooth motion, and corner blending algorithm\u003c\/li\u003e\n\u003cli\u003eFilament diameter: 2.85 mm\u003c\/li\u003e\n\u003cli\u003eCompatible print cores: AA+ 0.4 (included), CC+ 0.4, BB 0.4, 0.8 and DD 0.4 (sold separately) *Legacy AA and CC print cores can be used in combination with pre-sliced print jobs.\u003c\/li\u003e\n\u003cli\u003eNozzle temperature: Up to 340°C (572 °F)\u003c\/li\u003e\n\u003cli\u003eDimensional accuracy: ± 0.15 mm ± 0.15% feature nominal length* *Typical accuracy based on selected geometries, materials, and randomly selected machines\u003c\/li\u003e\n\u003cli\u003eBuild plate: Heated flexible PEI build plate (Up to 120 °C (248 °F)) or heated glass build plate (20 - 120 °C)\u003c\/li\u003e\n\u003cli\u003eBuild volume (XYZ): 330 × 240 × 300 mm (~13 × 9.4 × 11.8 in)\u003c\/li\u003e\n\u003cli\u003eLayer resolution: 60 - 400 microns (depending on the print core nozzle size and print profile)\u003c\/li\u003e\n\u003cli\u003eExtrusion flow: Up to 35 mm3\/s\u003c\/li\u003e\n\u003cli\u003eXY speed, acceleration, jerk: Up to 500 mm\/s, up to 50.000 mm\/s2, up to 100.000.000 mm\/s3\u003c\/li\u003e\n\u003cli\u003eMaterial handling: Dual spool holder with NFC recognition\u003c\/li\u003e\n\u003cli\u003eOperating sound: \u0026lt; 50 dBA\u003c\/li\u003e\n\u003cli\u003eDisplay: Fast responsive color touchscreen\u003c\/li\u003e\n\u003cli\u003eMonitoring: HD camera\u003c\/li\u003e\n\u003cli\u003eSystem on module: ARM cortex quadcore at 1.8 GHz\u003c\/li\u003e\n\u003cli\u003eReal-time controller: 600 MHz Arm-cortex M7\u003c\/li\u003e\n\u003cli\u003eConnectivity: Wi-Fi 2.4 \u0026amp; 5 GHz: IEEE 802.11a\/b\/g\/n\/ac. LAN: Gigabit Ethernet. USB: 2.0\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAmbient conditions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOperating temperature: 15 - 32 °C (59 - 90 °F), 10 - 90 % RH non-condensing\u003c\/li\u003e\n\u003cli\u003eNon-operating temperature: 0 - 32 °C (32 - 90 °F), 10 - 90 % RH non-condensing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSoftware\u003c\/h5\u003e\n\u003ch3\u003ePrint preparation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" href=\"https:\/\/ultimaker.com\/software\/ultimaker-cura\/\" target=\"_blank\"\u003eUltiMaker Cura 5.10.1 or newer\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eCura Cloud (no installation required)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrinter management\u003c\/h3\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/ultimaker.com\/software\/ultimaker-digital-factory\/\" target=\"_blank\"\u003eUltiMaker Digital Factory\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003eSupported OS\u003c\/h3\u003e\n\u003cp\u003eWindows, MacOS, Linux\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003eMaterials\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eEasy to print\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltiMaker PLA\u003c\/li\u003e\n\u003cli\u003eUltiMaker Tough PLA\u003c\/li\u003e\n\u003cli\u003eUltiMaker PETG\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDurable\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltiMaker ABS\u003c\/li\u003e\n\u003cli\u003eUltiMaker CPE\u003c\/li\u003e\n\u003cli\u003eUltiMaker Nylon\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFlexible\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltiMaker TPU 95A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eReinforced composites\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltiMaker PET-CF\u003c\/li\u003e\n\u003cli\u003eUltiMaker Nylon CF Slide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHeat resistant\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltiMaker CPE+\u003c\/li\u003e\n\u003cli\u003eUltiMaker PC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSupport materials\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltiMaker PVA\u003c\/li\u003e\n\u003cli\u003eUltiMaker Breakaway\u003c\/li\u003e\n\u003c\/ul\u003e"}

{"id":8997248598252,"title":"Ultimaker Print Core+ AA 0.4mm","handle":"ultimaker-print-core-aa-0-4mm","description":"\u003cp dir=\"auto\"\u003eElevate your 3D printing efficiency with the Ultimaker Print Core+ AA 0.4mm, a specialized high-speed print core designed for demanding professional workflows. Often referred to as the \"Print Core AA+\" in official Ultimaker documentation, this advanced variant is optimized for high-flow rates and rapid printing, delivering enhanced productivity, precision, and reliability compared to the standard AA core.\u003c\/p\u003e\n\u003ch3 dir=\"auto\"\u003eKey Features\u003c\/h3\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle Diameter\u003c\/strong\u003e: 0.4mm for balanced detail and speed in everyday builds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Flow Optimization\u003c\/strong\u003e: Engineered for faster print times without sacrificing quality, ideal for high-volume prototyping and production.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Compatibility\u003c\/strong\u003e: Supports a wide range of non-abrasive build materials, including PLA, PETG, ABS, and Breakaway support—perfect for versatile applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThermal Performance\u003c\/strong\u003e: Handles maximum nozzle temperatures up to 340°C (material-dependent) for consistent results with demanding filaments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmart Integration\u003c\/strong\u003e: Features an integrated chip for automatic recognition by your Ultimaker printer, ensuring seamless setup and operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign Focus\u003c\/strong\u003e: Tailored for high-accuracy prints in professional settings, minimizing issues like under-extrusion during accelerated workflows.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"auto\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp dir=\"auto\"\u003eThis Print Core AA+ 0.4mm is specifically designed for newer Ultimaker models, including the UltiMaker S8 (where it comes pre-installed) and S6. It may not be fully compatible with older printers like the S3, S5, or S7, which typically use the standard AA version. For optimal performance, pair it with UltiMaker Cura software, which unlocks dedicated high-speed profiles unavailable with the standard AA on certain models. Always verify your printer's compatibility via Ultimaker support to ensure a perfect fit.\u003c\/p\u003e","published_at":"2025-09-02T13:04:39-04:00","created_at":"2025-08-29T14:51:16-04:00","vendor":"Ultimaker","type":"Ultimaker Parts","tags":[],"price":31714,"price_min":31714,"price_max":31714,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":46771371737324,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UMK-COR-AAP-285-040","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ultimaker Print Core+ AA 0.4mm","public_title":null,"options":["Default Title"],"price":31714,"weight":100,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"810036964876","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":[],"featured_image":null,"options":["Title"],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp dir=\"auto\"\u003eElevate your 3D printing efficiency with the Ultimaker Print Core+ AA 0.4mm, a specialized high-speed print core designed for demanding professional workflows. Often referred to as the \"Print Core AA+\" in official Ultimaker documentation, this advanced variant is optimized for high-flow rates and rapid printing, delivering enhanced productivity, precision, and reliability compared to the standard AA core.\u003c\/p\u003e\n\u003ch3 dir=\"auto\"\u003eKey Features\u003c\/h3\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle Diameter\u003c\/strong\u003e: 0.4mm for balanced detail and speed in everyday builds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Flow Optimization\u003c\/strong\u003e: Engineered for faster print times without sacrificing quality, ideal for high-volume prototyping and production.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Compatibility\u003c\/strong\u003e: Supports a wide range of non-abrasive build materials, including PLA, PETG, ABS, and Breakaway support—perfect for versatile applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThermal Performance\u003c\/strong\u003e: Handles maximum nozzle temperatures up to 340°C (material-dependent) for consistent results with demanding filaments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmart Integration\u003c\/strong\u003e: Features an integrated chip for automatic recognition by your Ultimaker printer, ensuring seamless setup and operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign Focus\u003c\/strong\u003e: Tailored for high-accuracy prints in professional settings, minimizing issues like under-extrusion during accelerated workflows.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"auto\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp dir=\"auto\"\u003eThis Print Core AA+ 0.4mm is specifically designed for newer Ultimaker models, including the UltiMaker S8 (where it comes pre-installed) and S6. It may not be fully compatible with older printers like the S3, S5, or S7, which typically use the standard AA version. For optimal performance, pair it with UltiMaker Cura software, which unlocks dedicated high-speed profiles unavailable with the standard AA on certain models. Always verify your printer's compatibility via Ultimaker support to ensure a perfect fit.\u003c\/p\u003e"}

{"id":8996689871084,"title":"Ultimaker S series Printcore Silicon Cover (6 pack)","handle":"ultimaker-s-series-printcore-silicon-cover-6-pack","description":"\u003cp\u003eThis silicon piece covers the printcores of your Ultimaker S3\/S5\/S6\/S7\/S8 to prevent the build-up of material around the nozzles.\u003c\/p\u003e","published_at":"2025-08-28T15:40:38-04:00","created_at":"2025-08-28T15:32:58-04:00","vendor":"Ultimaker","type":"Ultimaker Parts","tags":["s3","s5","S6","S7","S8","spare parts","Ultimaker"],"price":3636,"price_min":3636,"price_max":3636,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":46769250599148,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UMK-SIL-COV-USX-006","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ultimaker S series Printcore Silicon Cover (6 pack)","public_title":null,"options":["Default Title"],"price":3636,"weight":100,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"810036967181","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-parts-ultimaker-s5-print-core-silicon-cover-1_1400x_2796f6a0-3502-4d6e-8a9f-94ca3050b5db.jpg?v=1739809077"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-parts-ultimaker-s5-print-core-silicon-cover-1_1400x_2796f6a0-3502-4d6e-8a9f-94ca3050b5db.jpg?v=1739809077","options":["Title"],"media":[{"alt":"Ultimaker S3 \u0026 S5 Print Core Silicon Cover - Voxel Factory -3D printer- Imprimante 3D","id":29070262141164,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-parts-ultimaker-s5-print-core-silicon-cover-1_1400x_2796f6a0-3502-4d6e-8a9f-94ca3050b5db.jpg?v=1739809077"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/ultimaker-parts-ultimaker-s5-print-core-silicon-cover-1_1400x_2796f6a0-3502-4d6e-8a9f-94ca3050b5db.jpg?v=1739809077","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThis silicon piece covers the printcores of your Ultimaker S3\/S5\/S6\/S7\/S8 to prevent the build-up of material around the nozzles.\u003c\/p\u003e"}

{"id":8996687970540,"title":"Fast Model Resin 5 L (Form 4)","handle":"fast-model-resin-5-l-form-4","description":"\u003cp\u003eFast Model Resin is Formlabs’ fastest resin, capable of printing at speeds of over 100 mm per hour. Print dental models in minutes or large prototypes in less than two hours.\u003c\/p\u003e\n\u003cp\u003eFast Model Resin is the next generation of Draft Resin that leverages the Form 4 Series to print three times faster, while offering improved mechanical properties.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWhy Choose Fast Model Resin?\u003cbr\u003eFast Model Resin is Formlabs’ fastest 3D printing resin, capable of printing at speeds of 100 mm per hour.\u003c\/p\u003e\n\u003cp\u003eParts As Fast As You Can Design Them\u003cbr\u003ePrint a fully packed build on Form 4 in 2 hours.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eFast Post-Processing\u003cbr\u003ePost-process parts quickly with a 5-minute wash and 5-minute room temperature post-cure.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePresentation-Ready Appearance\u003cbr\u003eCreate parts with a matte grey color and smooth surface finish.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eExtremely Low-Odor Printing\u003cbr\u003ePrint with ultra-low volatile organic compounds (VOCs) for a pleasant and comfortable user experience.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eApplications for Fast Model Resin\u003cbr\u003eFast Model Resin is capable of 3D printing a full Form 4 build volume in under two hours, making it ideal for rapid prototyping and high-throughput applications.\u003cbr\u003eConsider Fast Model Resin for:\u003c\/p\u003e\n\u003cp\u003eInitial prototypes for shape and feel\u003cbr\u003eRapid design iterations\u003cbr\u003eLarge models that can print quickly\u003cbr\u003eDental models for thermoforming aligners\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eMechanical Properties\u003cbr\u003ePost-cured at room temperature for 5 minutes\u003c\/p\u003e\n\u003cp\u003eUltimate Tensile Strength\u003c\/p\u003e\n\u003cp\u003e55 MPa\u003cbr\u003eTensile Modulus\u003c\/p\u003e\n\u003cp\u003e2500 MPa\u003cbr\u003eElongation at Break\u003c\/p\u003e\n\u003cp\u003e15%\u003cbr\u003eFlexural Strength\u003c\/p\u003e\n\u003cp\u003e98 MPa\u003cbr\u003eFlexural Modulus\u003c\/p\u003e\n\u003cp\u003e2600 MPa\u003cbr\u003eNotched Izod\u003c\/p\u003e\n\u003cp\u003e30 J\/m\u003cbr\u003eHeat Deflection Temperature at 0.45 MPa\u003c\/p\u003e\n\u003cp\u003e58 °C\u003cbr\u003ePost-cured at 60 °C for 15 minutes\u003c\/p\u003e\n\u003cp\u003eUltimate Tensile Strength\u003c\/p\u003e\n\u003cp\u003e62 MPa\u003cbr\u003eTensile Modulus\u003c\/p\u003e\n\u003cp\u003e2700 MPa\u003cbr\u003eElongation at Break\u003c\/p\u003e\n\u003cp\u003e11%\u003cbr\u003eFlexural Strength\u003c\/p\u003e\n\u003cp\u003e106 MPa\u003cbr\u003eFlexural Modulus\u003c\/p\u003e\n\u003cp\u003e2700 MPa\u003cbr\u003eNotched Izod\u003c\/p\u003e\n\u003cp\u003e37 J\/m\u003cbr\u003eHeat Deflection Temperature at 0.45 MPa\u003c\/p\u003e\n\u003cp\u003e76 °C\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ePost-Processing\u003cbr\u003eWash Settings\u003cbr\u003eDuration\u003cbr\u003e5 minutes\u003c\/p\u003e\n\u003cp\u003eNotes\u003cbr\u003eStart with a 5-minute wash and modify the wash time based on your part geometry and solvent purity.\u003c\/p\u003e\n\u003cp\u003eForm Cure Settings\u003cbr\u003eDefault\u003cbr\u003e5 minutes at room temperature\u003c\/p\u003e\n\u003cp\u003eEnhanced\u003cbr\u003e15 minutes at 60 °C\u003c\/p\u003e\n\u003cp\u003eNotes\u003cbr\u003ePost-curing is optional for parts printed in Fast Model Resin. However, we recommend either a 5-minute room temperature cure to reduce surface tack and improve mechanical properties, or a 15-minute cure at 60 °C for the highest strength, stiffness, and heat deflection temperature.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/media.formlabs.com\/m\/2627f4d1c4f991ad\/original\/-ENUS-Fast-Model-TDS.pdf\" target=\"_blank\"\u003e\u003cspan\u003e\u003cspan\u003eDownload the Fast Model Resin Technical Data Sheet\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","published_at":"2025-08-28T15:57:26-04:00","created_at":"2025-08-28T15:24:32-04:00","vendor":"Formlabs","type":"Formlabs Resins","tags":["Form 4","formlabs","resin"],"price":46475,"price_min":46475,"price_max":46475,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":46769244340460,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"FLB-RSN-05L-FST-MOD","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Fast Model Resin 5 L (Form 4)","public_title":null,"options":["Default Title"],"price":46475,"weight":7500,"compare_at_price":null,"inventory_quantity":-3,"inventory_management":"shopify","inventory_policy":"deny","barcode":"811294036800","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/Fast_Model_Resin_5_L_Form_4_product_picture.webp?v=1756409352","\/\/www.voxelfactory.com\/cdn\/shop\/files\/Fast_Model_Resin_5_L_Form_4_table_of_teeth_product_picture.webp?v=1756409617","\/\/www.voxelfactory.com\/cdn\/shop\/files\/Fast_Model_Resin_5_L_Form_4_teeth_product_picture.webp?v=1756409617"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Fast_Model_Resin_5_L_Form_4_product_picture.webp?v=1756409352","options":["Title"],"media":[{"alt":null,"id":35849891512556,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Fast_Model_Resin_5_L_Form_4_product_picture.webp?v=1756409352"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Fast_Model_Resin_5_L_Form_4_product_picture.webp?v=1756409352","width":1400},{"alt":null,"id":35849905307884,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Fast_Model_Resin_5_L_Form_4_table_of_teeth_product_picture.webp?v=1756409617"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Fast_Model_Resin_5_L_Form_4_table_of_teeth_product_picture.webp?v=1756409617","width":1400},{"alt":null,"id":35849905275116,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Fast_Model_Resin_5_L_Form_4_teeth_product_picture.webp?v=1756409617"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Fast_Model_Resin_5_L_Form_4_teeth_product_picture.webp?v=1756409617","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eFast Model Resin is Formlabs’ fastest resin, capable of printing at speeds of over 100 mm per hour. Print dental models in minutes or large prototypes in less than two hours.\u003c\/p\u003e\n\u003cp\u003eFast Model Resin is the next generation of Draft Resin that leverages the Form 4 Series to print three times faster, while offering improved mechanical properties.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWhy Choose Fast Model Resin?\u003cbr\u003eFast Model Resin is Formlabs’ fastest 3D printing resin, capable of printing at speeds of 100 mm per hour.\u003c\/p\u003e\n\u003cp\u003eParts As Fast As You Can Design Them\u003cbr\u003ePrint a fully packed build on Form 4 in 2 hours.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eFast Post-Processing\u003cbr\u003ePost-process parts quickly with a 5-minute wash and 5-minute room temperature post-cure.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePresentation-Ready Appearance\u003cbr\u003eCreate parts with a matte grey color and smooth surface finish.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eExtremely Low-Odor Printing\u003cbr\u003ePrint with ultra-low volatile organic compounds (VOCs) for a pleasant and comfortable user experience.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eApplications for Fast Model Resin\u003cbr\u003eFast Model Resin is capable of 3D printing a full Form 4 build volume in under two hours, making it ideal for rapid prototyping and high-throughput applications.\u003cbr\u003eConsider Fast Model Resin for:\u003c\/p\u003e\n\u003cp\u003eInitial prototypes for shape and feel\u003cbr\u003eRapid design iterations\u003cbr\u003eLarge models that can print quickly\u003cbr\u003eDental models for thermoforming aligners\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eMechanical Properties\u003cbr\u003ePost-cured at room temperature for 5 minutes\u003c\/p\u003e\n\u003cp\u003eUltimate Tensile Strength\u003c\/p\u003e\n\u003cp\u003e55 MPa\u003cbr\u003eTensile Modulus\u003c\/p\u003e\n\u003cp\u003e2500 MPa\u003cbr\u003eElongation at Break\u003c\/p\u003e\n\u003cp\u003e15%\u003cbr\u003eFlexural Strength\u003c\/p\u003e\n\u003cp\u003e98 MPa\u003cbr\u003eFlexural Modulus\u003c\/p\u003e\n\u003cp\u003e2600 MPa\u003cbr\u003eNotched Izod\u003c\/p\u003e\n\u003cp\u003e30 J\/m\u003cbr\u003eHeat Deflection Temperature at 0.45 MPa\u003c\/p\u003e\n\u003cp\u003e58 °C\u003cbr\u003ePost-cured at 60 °C for 15 minutes\u003c\/p\u003e\n\u003cp\u003eUltimate Tensile Strength\u003c\/p\u003e\n\u003cp\u003e62 MPa\u003cbr\u003eTensile Modulus\u003c\/p\u003e\n\u003cp\u003e2700 MPa\u003cbr\u003eElongation at Break\u003c\/p\u003e\n\u003cp\u003e11%\u003cbr\u003eFlexural Strength\u003c\/p\u003e\n\u003cp\u003e106 MPa\u003cbr\u003eFlexural Modulus\u003c\/p\u003e\n\u003cp\u003e2700 MPa\u003cbr\u003eNotched Izod\u003c\/p\u003e\n\u003cp\u003e37 J\/m\u003cbr\u003eHeat Deflection Temperature at 0.45 MPa\u003c\/p\u003e\n\u003cp\u003e76 °C\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ePost-Processing\u003cbr\u003eWash Settings\u003cbr\u003eDuration\u003cbr\u003e5 minutes\u003c\/p\u003e\n\u003cp\u003eNotes\u003cbr\u003eStart with a 5-minute wash and modify the wash time based on your part geometry and solvent purity.\u003c\/p\u003e\n\u003cp\u003eForm Cure Settings\u003cbr\u003eDefault\u003cbr\u003e5 minutes at room temperature\u003c\/p\u003e\n\u003cp\u003eEnhanced\u003cbr\u003e15 minutes at 60 °C\u003c\/p\u003e\n\u003cp\u003eNotes\u003cbr\u003ePost-curing is optional for parts printed in Fast Model Resin. However, we recommend either a 5-minute room temperature cure to reduce surface tack and improve mechanical properties, or a 15-minute cure at 60 °C for the highest strength, stiffness, and heat deflection temperature.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/media.formlabs.com\/m\/2627f4d1c4f991ad\/original\/-ENUS-Fast-Model-TDS.pdf\" target=\"_blank\"\u003e\u003cspan\u003e\u003cspan\u003eDownload the Fast Model Resin Technical Data Sheet\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e"}

{"id":8996651696364,"title":"Precision Model Resin 5 L (Form 4)","handle":"precision-model-resin-5-l-form-4","description":"\u003cp\u003ePrecision Model Resin is a high-accuracy material for creating restorative models with \u0026gt;99% of printed surface area within 100 μm of the digital model. Create beautiful models with crisp margin lines thanks to high opacity, beige color, and a smooth, matte finish to capture fine details.\u003c\/p\u003e\n\u003cp\u003ePrecision Model Resin is the next generation of Model Resin that leverages the Form 4 Series to print three times faster, while offering better accuracy and improved aesthetics.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/dental.formlabs.com\/indications\/restorative-models\/crown-bridges-guide\/\" target=\"_blank\"\u003eRead the Formlabs Application Guide\u003c\/a\u003e to learn the complete digital workflow and best practices for making 3D printed restorative models on your Formlabs 3D printer.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWhy Choose Precision Model Resin?\u003cbr\u003ePrecision Model Resin is a high-accuracy 3D printing resin formulated to create restorative models with over 99% of their printed surface area within 100 μm of the design parameters.\u003c\/p\u003e\n\u003cp\u003eUltra High-Accuracy Models\u003cbr\u003eConsistently create restorative models with over 99% of printed surface area within 100 μm of the digital model.\u003c\/p\u003e\n\u003cp\u003eUnmatched Reliability\u003cbr\u003ePrint confidently with an end-to-end product ecosystem rigorously validated for continuous uptime and reliability.\u003c\/p\u003e\n\u003cp\u003eProduction-Capable Print Speed\u003cbr\u003ePrint eight models in as little as 90 minutes and post-process parts quickly with a 5-minute wash and 5-minute room temperature post-cure.\u003c\/p\u003e\n\u003cp\u003eGypsum-Like Appearance\u003cbr\u003eEasily visualize crisp margins with the matte, opaque beige color.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ePost-Processing\u003cbr\u003eWash Settings\u003cbr\u003eDuration\u003cbr\u003e5 minutes\u003c\/p\u003e\n\u003cp\u003eNotes\u003cbr\u003eStart with a 5-minute wash and modify the wash time based on your part geometry and solvent purity.\u003c\/p\u003e\n\u003cp\u003eCure Settings\u003cbr\u003eDuration\u003cbr\u003e5 minutes at 35 °C\u003c\/p\u003e\n\u003cp\u003eNotes\u003cbr\u003eThere are no special curing instructions for Precision Model Resin.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/media.formlabs.com\/m\/37fc9dc612bb3fb7\/original\/-ENUS-Precision-Model-Resin-TDS.pdf\" target=\"_blank\"\u003e\u003cspan\u003e\u003cspan\u003eDownload the Precision Model Resin Technical Data Sheet\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","published_at":"2025-08-28T16:40:32-04:00","created_at":"2025-08-28T14:27:16-04:00","vendor":"Formlabs","type":"Formlabs Resins","tags":["Form 4","formlabs","resin"],"price":82940,"price_min":82940,"price_max":82940,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":46769154031852,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"FLB-RSN-05L-PRE-MOD","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Precision Model Resin 5 L (Form 4)","public_title":null,"options":["Default Title"],"price":82940,"weight":7500,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"811294036817","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/Precision_Model_Resin_5_L_Form4_product_picture.webp?v=1756406312","\/\/www.voxelfactory.com\/cdn\/shop\/files\/Precision_Model_Resin_5_L_Form_4_table_of_teeth_product_picture.webp?v=1756407358","\/\/www.voxelfactory.com\/cdn\/shop\/files\/Precision_Model_Resin_5_L_Form_4_teeth_product_picture.webp?v=1756407358"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Precision_Model_Resin_5_L_Form4_product_picture.webp?v=1756406312","options":["Title"],"media":[{"alt":null,"id":35849551282412,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Precision_Model_Resin_5_L_Form4_product_picture.webp?v=1756406312"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Precision_Model_Resin_5_L_Form4_product_picture.webp?v=1756406312","width":1400},{"alt":null,"id":35849692971244,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Precision_Model_Resin_5_L_Form_4_table_of_teeth_product_picture.webp?v=1756407358"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Precision_Model_Resin_5_L_Form_4_table_of_teeth_product_picture.webp?v=1756407358","width":1400},{"alt":null,"id":35849693036780,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Precision_Model_Resin_5_L_Form_4_teeth_product_picture.webp?v=1756407358"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Precision_Model_Resin_5_L_Form_4_teeth_product_picture.webp?v=1756407358","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003ePrecision Model Resin is a high-accuracy material for creating restorative models with \u0026gt;99% of printed surface area within 100 μm of the digital model. Create beautiful models with crisp margin lines thanks to high opacity, beige color, and a smooth, matte finish to capture fine details.\u003c\/p\u003e\n\u003cp\u003ePrecision Model Resin is the next generation of Model Resin that leverages the Form 4 Series to print three times faster, while offering better accuracy and improved aesthetics.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/dental.formlabs.com\/indications\/restorative-models\/crown-bridges-guide\/\" target=\"_blank\"\u003eRead the Formlabs Application Guide\u003c\/a\u003e to learn the complete digital workflow and best practices for making 3D printed restorative models on your Formlabs 3D printer.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWhy Choose Precision Model Resin?\u003cbr\u003ePrecision Model Resin is a high-accuracy 3D printing resin formulated to create restorative models with over 99% of their printed surface area within 100 μm of the design parameters.\u003c\/p\u003e\n\u003cp\u003eUltra High-Accuracy Models\u003cbr\u003eConsistently create restorative models with over 99% of printed surface area within 100 μm of the digital model.\u003c\/p\u003e\n\u003cp\u003eUnmatched Reliability\u003cbr\u003ePrint confidently with an end-to-end product ecosystem rigorously validated for continuous uptime and reliability.\u003c\/p\u003e\n\u003cp\u003eProduction-Capable Print Speed\u003cbr\u003ePrint eight models in as little as 90 minutes and post-process parts quickly with a 5-minute wash and 5-minute room temperature post-cure.\u003c\/p\u003e\n\u003cp\u003eGypsum-Like Appearance\u003cbr\u003eEasily visualize crisp margins with the matte, opaque beige color.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ePost-Processing\u003cbr\u003eWash Settings\u003cbr\u003eDuration\u003cbr\u003e5 minutes\u003c\/p\u003e\n\u003cp\u003eNotes\u003cbr\u003eStart with a 5-minute wash and modify the wash time based on your part geometry and solvent purity.\u003c\/p\u003e\n\u003cp\u003eCure Settings\u003cbr\u003eDuration\u003cbr\u003e5 minutes at 35 °C\u003c\/p\u003e\n\u003cp\u003eNotes\u003cbr\u003eThere are no special curing instructions for Precision Model Resin.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/media.formlabs.com\/m\/37fc9dc612bb3fb7\/original\/-ENUS-Precision-Model-Resin-TDS.pdf\" target=\"_blank\"\u003e\u003cspan\u003e\u003cspan\u003eDownload the Precision Model Resin Technical Data Sheet\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e"}