{"id":9301879619820,"title":"Prusament ASA 1.75mm 800g (NFC)","handle":"prusament-asa-1-75mm-800g-nfc","description":"\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003ePrusament is a premium-grade material made by the same people who build the printers. Every spool is manufactured in-house with consistent color and high diameter precision. You can verify it yourself, down to the last meter.\u003c\/p\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003ch2\u003eWhy To Choose Prusament\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGuaranteed Color Consistency\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eEvery Prusament color is formulated and locked to a documented spectroscopic recipe. Prusa test every batch against the standard before it ships. The result: if you run out mid-project and order a second spool, the colors will match perfectly.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrecise Manufacturing \u0026amp; Strict Quality Control\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTheir diameter tolerance is the maximum limit, not an average: when they say the diameter tolerance is ±0.04 mm, the real numbers are much lower. Prusa continuously measure and record diameter and ovality across the full length of every spool and publish the actual data.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh Quality You Can Check Yourself\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eEvery Prusament spool comes with the actual measured data from manufacturing: diameter readings along the entire length, weight, and ovality. Prusa is the only filament manufacturer in the world that does this.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerfect Winding On Every Spool\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eTheir PLA filament is wound under controlled tension on precision machines. Every spool goes through a final inspection before shipping. The result is a spool that feeds smoothly from start to finish. Also, it looks great every time.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eExcellent for outdoor use\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eASA's one of the main advantages is excellent UV resistance. This, in combination with good high-temperature resistance, makes it perfectly suitable for making outdoor parts with a long lifespan. Here's a great example: Czech company Anitra System uses Prusament ASA for making GPS loggers attached to migratory birds, where long lifespan and high resistance are necessary.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/4b2d083a-f452-4b48-a851-86a51be7fcf2.avif?v=1782740947\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003ePerfectly smooth finish made with acetone vapors\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eASA is soluble in acetone. When exposed to acetone vapors, the model's surface melts and forms a glossy finish, hiding print layers and imperfections. The result resembles an injection-molded part. You can learn more about chemical smoothing in Prusa's \u003ca href=\"https:\/\/blog.prusa3d.com\/improve-your-3d-prints-with-chemical-smoothing_36268\/\" target=\"_blank\" rel=\"noopener\"\u003eblog article\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/ac37dd88-ff99-4672-8d85-19dac7209815.avif?v=1782741004\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eFine details without stringing\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eUnlike other technical materials, ASA offers little to no stringing. This makes it suitable for printing tiny, detailed parts, such as tabletop figures and similar models.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/d8ebb7b2-e09c-4026-8357-d70530825ffa.avif?v=1782741040\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eBasic Attributes\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\" rowspan=\"6\"\u003ePros\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eGreat for outside use – UV stable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eGood high-temperature resistance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eDetailed prints without a stringing effect\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eCan be smoothed with acetone vapors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eCan be easily sanded \/ post-processed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eGood mechanical resistance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\" rowspan=\"4\"\u003eCons\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eLarge models tend to warp. We recommend printing in an enclosure or printing large components with a less warping material, such as PETG.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eProduces a slight odor of burned plastic during printing (less than ABS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eContains styrene (potentially harmful fumes). We recommend printing in a well-ventilated area or using an enclosure with active filtration.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSlightly hygroscopic (absorbs moisture)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003cthead class=\"voxel-product-description-table-head\"\u003e\n\u003ctr\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003eParameter\u003c\/th\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eNozzle Temperature\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e260 ±5 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eHeatbed Temperature\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e110 ±5 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eRecommended Steel Sheet\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSatin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eRecommended Nozzle\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e0.4 mm brass nozzle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSupported Prusa Print Profiles\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eAll Prusa FDM 3D printers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eFilament Diameter\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eFilament Diameter Tolerance\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e±0.04 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","published_at":"2026-06-29T10:18:54-04:00","created_at":"2026-06-29T09:43:36-04:00","vendor":"Prusa Research","type":"Prusa Research Filament","tags":["asa"],"price":4199,"price_min":4199,"price_max":4199,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47842363146476,"title":"Jet Black","option1":"Jet Black","option2":null,"option3":null,"sku":"PRU-PMT-ASA-JBK-1KG","requires_shipping":true,"taxable":true,"featured_image":{"id":46702215168236,"product_id":9301879619820,"position":1,"created_at":"2026-06-29T10:18:12-04:00","updated_at":"2026-06-29T10:18:14-04:00","alt":null,"width":1400,"height":1050,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusament_ASA_1_75mm_800g_NFC_Jet_Black_Product_Picture.webp?v=1782742694","variant_ids":[47842363146476]},"available":true,"name":"Prusament ASA 1.75mm 800g (NFC) - Jet Black","public_title":"Jet Black","options":["Jet Black"],"price":4199,"weight":1100,"compare_at_price":null,"inventory_quantity":40,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"featured_media":{"alt":null,"id":37414886768876,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusament_ASA_1_75mm_800g_NFC_Jet_Black_Product_Picture.webp?v=1782742694"}},"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":47842363179244,"title":"Signal White","option1":"Signal White","option2":null,"option3":null,"sku":"PRU-PMT-ASA-SWT-1KG","requires_shipping":true,"taxable":true,"featured_image":{"id":46702215528684,"product_id":9301879619820,"position":2,"created_at":"2026-06-29T10:18:21-04:00","updated_at":"2026-06-29T10:18:22-04:00","alt":null,"width":1400,"height":1050,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusament_ASA_1_75mm_800g_NFC_Signal_White_Product_Picture.webp?v=1782742702","variant_ids":[47842363179244]},"available":true,"name":"Prusament ASA 1.75mm 800g (NFC) - Signal White","public_title":"Signal White","options":["Signal White"],"price":4199,"weight":1100,"compare_at_price":null,"inventory_quantity":30,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"featured_media":{"alt":null,"id":37414887162092,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusament_ASA_1_75mm_800g_NFC_Signal_White_Product_Picture.webp?v=1782742702"}},"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":47842363212012,"title":"Prusa Orange","option1":"Prusa Orange","option2":null,"option3":null,"sku":"PRU-PMT-ASA-POR-1KG","requires_shipping":true,"taxable":true,"featured_image":{"id":46702215659756,"product_id":9301879619820,"position":3,"created_at":"2026-06-29T10:18:29-04:00","updated_at":"2026-06-29T10:18:30-04:00","alt":null,"width":1400,"height":1050,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusament_ASA_1_75mm_800g_NFC_Prusa_Orange_Product_Picture.webp?v=1782742710","variant_ids":[47842363212012]},"available":true,"name":"Prusament ASA 1.75mm 800g (NFC) - Prusa Orange","public_title":"Prusa Orange","options":["Prusa Orange"],"price":4199,"weight":1100,"compare_at_price":null,"inventory_quantity":28,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"featured_media":{"alt":null,"id":37414887293164,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusament_ASA_1_75mm_800g_NFC_Prusa_Orange_Product_Picture.webp?v=1782742710"}},"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusament_ASA_1_75mm_800g_NFC_Jet_Black_Product_Picture.webp?v=1782742694","\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusament_ASA_1_75mm_800g_NFC_Signal_White_Product_Picture.webp?v=1782742702","\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusament_ASA_1_75mm_800g_NFC_Prusa_Orange_Product_Picture.webp?v=1782742710"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusament_ASA_1_75mm_800g_NFC_Jet_Black_Product_Picture.webp?v=1782742694","options":["Color"],"media":[{"alt":null,"id":37414886768876,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusament_ASA_1_75mm_800g_NFC_Jet_Black_Product_Picture.webp?v=1782742694"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusament_ASA_1_75mm_800g_NFC_Jet_Black_Product_Picture.webp?v=1782742694","width":1400},{"alt":null,"id":37414887162092,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusament_ASA_1_75mm_800g_NFC_Signal_White_Product_Picture.webp?v=1782742702"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusament_ASA_1_75mm_800g_NFC_Signal_White_Product_Picture.webp?v=1782742702","width":1400},{"alt":null,"id":37414887293164,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusament_ASA_1_75mm_800g_NFC_Prusa_Orange_Product_Picture.webp?v=1782742710"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusament_ASA_1_75mm_800g_NFC_Prusa_Orange_Product_Picture.webp?v=1782742710","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003ePrusament is a premium-grade material made by the same people who build the printers. Every spool is manufactured in-house with consistent color and high diameter precision. You can verify it yourself, down to the last meter.\u003c\/p\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003ch2\u003eWhy To Choose Prusament\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGuaranteed Color Consistency\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eEvery Prusament color is formulated and locked to a documented spectroscopic recipe. Prusa test every batch against the standard before it ships. The result: if you run out mid-project and order a second spool, the colors will match perfectly.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrecise Manufacturing \u0026amp; Strict Quality Control\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTheir diameter tolerance is the maximum limit, not an average: when they say the diameter tolerance is ±0.04 mm, the real numbers are much lower. Prusa continuously measure and record diameter and ovality across the full length of every spool and publish the actual data.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh Quality You Can Check Yourself\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eEvery Prusament spool comes with the actual measured data from manufacturing: diameter readings along the entire length, weight, and ovality. Prusa is the only filament manufacturer in the world that does this.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerfect Winding On Every Spool\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eTheir PLA filament is wound under controlled tension on precision machines. Every spool goes through a final inspection before shipping. The result is a spool that feeds smoothly from start to finish. Also, it looks great every time.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eExcellent for outdoor use\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eASA's one of the main advantages is excellent UV resistance. This, in combination with good high-temperature resistance, makes it perfectly suitable for making outdoor parts with a long lifespan. Here's a great example: Czech company Anitra System uses Prusament ASA for making GPS loggers attached to migratory birds, where long lifespan and high resistance are necessary.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/4b2d083a-f452-4b48-a851-86a51be7fcf2.avif?v=1782740947\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003ePerfectly smooth finish made with acetone vapors\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eASA is soluble in acetone. When exposed to acetone vapors, the model's surface melts and forms a glossy finish, hiding print layers and imperfections. The result resembles an injection-molded part. You can learn more about chemical smoothing in Prusa's \u003ca href=\"https:\/\/blog.prusa3d.com\/improve-your-3d-prints-with-chemical-smoothing_36268\/\" target=\"_blank\" rel=\"noopener\"\u003eblog article\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/ac37dd88-ff99-4672-8d85-19dac7209815.avif?v=1782741004\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eFine details without stringing\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eUnlike other technical materials, ASA offers little to no stringing. This makes it suitable for printing tiny, detailed parts, such as tabletop figures and similar models.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/d8ebb7b2-e09c-4026-8357-d70530825ffa.avif?v=1782741040\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eBasic Attributes\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\" rowspan=\"6\"\u003ePros\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eGreat for outside use – UV stable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eGood high-temperature resistance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eDetailed prints without a stringing effect\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eCan be smoothed with acetone vapors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eCan be easily sanded \/ post-processed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eGood mechanical resistance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\" rowspan=\"4\"\u003eCons\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eLarge models tend to warp. We recommend printing in an enclosure or printing large components with a less warping material, such as PETG.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eProduces a slight odor of burned plastic during printing (less than ABS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eContains styrene (potentially harmful fumes). We recommend printing in a well-ventilated area or using an enclosure with active filtration.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSlightly hygroscopic (absorbs moisture)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003cthead class=\"voxel-product-description-table-head\"\u003e\n\u003ctr\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003eParameter\u003c\/th\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eNozzle Temperature\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e260 ±5 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eHeatbed Temperature\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e110 ±5 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eRecommended Steel Sheet\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSatin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eRecommended Nozzle\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e0.4 mm brass nozzle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSupported Prusa Print Profiles\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eAll Prusa FDM 3D printers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eFilament Diameter\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eFilament Diameter Tolerance\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e±0.04 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e"}

Prusament ASA 1.75mm 800g (NFC)

Previous Product | Next Product

Product Description

Voxel SKU: PRU-PMT-ASA-JBK-1KG

Vendor: Prusa Research

Color

$41.99

Maximum quantity available reached.

Tags : asa

Related Products

Polymaker PLA Pro 1.75mm 1kg

IN STOCK: 0

$23.99

Prusa Research XL to XL Plus upgrade kit

Prusa XL to Prusa XL+ Upgrade

IN STOCK: 0

From $359.00

{"id":9404542746860,"title":"Prusa XL to Prusa XL+ Upgrade","handle":"prusa-xl-to-prusa-xl-upgrade","description":"\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003eThe XL features key upgrades that deliver faster print speeds, superior output quality, and a smoother, more reliable user experience. Meanwhile, the XL+ expands capability even further with an actively heated chamber ready for temperatures up to 60 °C. Through it all, the XL series maintains its position as the largest, most capable toolchanger on the market.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Contents\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e- GT1.5 belt and pulleys\u003cbr\u003e- New, more powerful print fans (1-5 tools)\u003cbr\u003e- Nozzle Wiper\u003cbr\u003e- Tool Offset sensor + cables (Only 2 and 5 tool versions)\u003cbr\u003e- 30+ New printed parts from PC and PCCF - better temperature resistance needed for the enclosure and external heater\u003cbr\u003e- Universal spoolholder with drybox support (1-5 depending on the number of tools)\u003cbr\u003e- Upgraded 360° fan shroud\u003cbr\u003e- Improved cooling for the motherboard\u003cbr\u003e- Improved cooling for bed control board\u003cbr\u003e- Additional electronics for new fans\u003c\/p\u003e","published_at":"2026-09-03T15:42:12-04:00","created_at":"2026-09-03T15:22:22-04:00","vendor":"Prusa Research","type":"Prusa parts","tags":["Prusa XL"],"price":35900,"price_min":35900,"price_max":65900,"available":false,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":48303522119916,"title":"1 toolhead","option1":"1 toolhead","option2":null,"option3":null,"sku":"PRU-UPG-0XL-PLUS-1TH","requires_shipping":true,"taxable":true,"featured_image":{"id":47384405082348,"product_id":9404542746860,"position":1,"created_at":"2026-09-03T15:29:16-04:00","updated_at":"2026-09-03T15:29:17-04:00","alt":"Prusa Research XL to XL Plus upgrade kit","width":1400,"height":1050,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_Research_XL_to_XL_Plus_upgrade_kit_Product_Picture.webp?v=1788463757","variant_ids":[48303522119916,48303522152684,48303522185452]},"available":false,"name":"Prusa XL to Prusa XL+ Upgrade - 1 toolhead","public_title":"1 toolhead","options":["1 toolhead"],"price":35900,"weight":160,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"featured_media":{"alt":"Prusa Research XL to XL Plus upgrade kit","id":38080532578540,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_Research_XL_to_XL_Plus_upgrade_kit_Product_Picture.webp?v=1788463757"}},"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":48303522152684,"title":"2 toolhead","option1":"2 toolhead","option2":null,"option3":null,"sku":"PRU-UPG-0XL-PLUS-2TH","requires_shipping":true,"taxable":true,"featured_image":{"id":47384405082348,"product_id":9404542746860,"position":1,"created_at":"2026-09-03T15:29:16-04:00","updated_at":"2026-09-03T15:29:17-04:00","alt":"Prusa Research XL to XL Plus upgrade kit","width":1400,"height":1050,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_Research_XL_to_XL_Plus_upgrade_kit_Product_Picture.webp?v=1788463757","variant_ids":[48303522119916,48303522152684,48303522185452]},"available":false,"name":"Prusa XL to Prusa XL+ Upgrade - 2 toolhead","public_title":"2 toolhead","options":["2 toolhead"],"price":43900,"weight":160,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"featured_media":{"alt":"Prusa Research XL to XL Plus upgrade kit","id":38080532578540,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_Research_XL_to_XL_Plus_upgrade_kit_Product_Picture.webp?v=1788463757"}},"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":48303522185452,"title":"5 toolheads","option1":"5 toolheads","option2":null,"option3":null,"sku":"PRU-UPG-0XL-PLUS-5TH","requires_shipping":true,"taxable":true,"featured_image":{"id":47384405082348,"product_id":9404542746860,"position":1,"created_at":"2026-09-03T15:29:16-04:00","updated_at":"2026-09-03T15:29:17-04:00","alt":"Prusa Research XL to XL Plus upgrade kit","width":1400,"height":1050,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_Research_XL_to_XL_Plus_upgrade_kit_Product_Picture.webp?v=1788463757","variant_ids":[48303522119916,48303522152684,48303522185452]},"available":false,"name":"Prusa XL to Prusa XL+ Upgrade - 5 toolheads","public_title":"5 toolheads","options":["5 toolheads"],"price":65900,"weight":160,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"featured_media":{"alt":"Prusa Research XL to XL Plus upgrade kit","id":38080532578540,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_Research_XL_to_XL_Plus_upgrade_kit_Product_Picture.webp?v=1788463757"}},"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_Research_XL_to_XL_Plus_upgrade_kit_Product_Picture.webp?v=1788463757"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_Research_XL_to_XL_Plus_upgrade_kit_Product_Picture.webp?v=1788463757","options":["How many toolheads do i have?"],"media":[{"alt":"Prusa Research XL to XL Plus upgrade kit","id":38080532578540,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_Research_XL_to_XL_Plus_upgrade_kit_Product_Picture.webp?v=1788463757"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_Research_XL_to_XL_Plus_upgrade_kit_Product_Picture.webp?v=1788463757","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003eThe XL features key upgrades that deliver faster print speeds, superior output quality, and a smoother, more reliable user experience. Meanwhile, the XL+ expands capability even further with an actively heated chamber ready for temperatures up to 60 °C. Through it all, the XL series maintains its position as the largest, most capable toolchanger on the market.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Contents\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e- GT1.5 belt and pulleys\u003cbr\u003e- New, more powerful print fans (1-5 tools)\u003cbr\u003e- Nozzle Wiper\u003cbr\u003e- Tool Offset sensor + cables (Only 2 and 5 tool versions)\u003cbr\u003e- 30+ New printed parts from PC and PCCF - better temperature resistance needed for the enclosure and external heater\u003cbr\u003e- Universal spoolholder with drybox support (1-5 depending on the number of tools)\u003cbr\u003e- Upgraded 360° fan shroud\u003cbr\u003e- Improved cooling for the motherboard\u003cbr\u003e- Improved cooling for bed control board\u003cbr\u003e- Additional electronics for new fans\u003c\/p\u003e"}

Prusa XL to Prusa XL+ Upgrade

$359.00

Summary The XL features key upgrades that deliver faster print speeds, superior output quality, and a smoother, more reliable user experience. Meanwhile, the XL+ expands capability even further with an actively heated chamber ready for temperatures up to 60 °C. Through it all, the XL series maintains its position as the largest, most capable too...

How many toolheads do i have?

1 toolhead

2 toolhead

5 toolheads

Prusa_Research_Core_One_plus_to_CORE_One_plus_gen_2_upgrade_kit_Product_Picture

Prusa CORE One+ to Prusa CORE One+ (Gen 2) upgrade

IN STOCK: 0

$78.99

{"id":9404529574124,"title":"Prusa CORE One+ to Prusa CORE One+ (Gen 2) upgrade","handle":"prusa-core-one-to-prusa-core-one-gen-2","description":"\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003eThe second generation keeps the same CORE One platform and adds several practical improvements: less waiting before a print starts, cleaner starts, smoother-looking surfaces, and easier access for maintenance.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage contents\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e- Belts \u0026amp; Pulleys GT1.5\u003cbr\u003e- Expansion Joints (Gen 2)\u003cbr\u003e- Nozzle wiper\u003cbr\u003e- Spare nylon rivets\u003c\/p\u003e","published_at":"2026-09-03T14:42:17-04:00","created_at":"2026-09-03T14:42:16-04:00","vendor":"Prusa Research","type":"Prusa parts","tags":["CORE One\/+"],"price":7899,"price_min":7899,"price_max":7899,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":48303464448236,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-UPG-COP-0TO-GN2","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Prusa CORE One+ to Prusa CORE One+ (Gen 2) upgrade","public_title":null,"options":["Default Title"],"price":7899,"weight":160,"compare_at_price":null,"inventory_quantity":-1,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_Research_Core_One_plus_to_CORE_One_plus_gen_2_upgrade_kit_Product_Picture.webp?v=1788460919"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_Research_Core_One_plus_to_CORE_One_plus_gen_2_upgrade_kit_Product_Picture.webp?v=1788460919","options":["Title"],"media":[{"alt":"Prusa_Research_Core_One_plus_to_CORE_One_plus_gen_2_upgrade_kit_Product_Picture","id":38080382337260,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_Research_Core_One_plus_to_CORE_One_plus_gen_2_upgrade_kit_Product_Picture.webp?v=1788460919"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_Research_Core_One_plus_to_CORE_One_plus_gen_2_upgrade_kit_Product_Picture.webp?v=1788460919","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003eThe second generation keeps the same CORE One platform and adds several practical improvements: less waiting before a print starts, cleaner starts, smoother-looking surfaces, and easier access for maintenance.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage contents\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e- Belts \u0026amp; Pulleys GT1.5\u003cbr\u003e- Expansion Joints (Gen 2)\u003cbr\u003e- Nozzle wiper\u003cbr\u003e- Spare nylon rivets\u003c\/p\u003e"}

Prusa CORE One+ to Prusa CORE One+ (Gen 2) upgrade

$78.99

Summary The second generation keeps the same CORE One platform and adds several practical improvements: less waiting before a print starts, cleaner starts, smoother-looking surfaces, and easier access for maintenance. Package contents - Belts & Pulleys GT1.5- Expansion Joints (Gen 2)- Nozzle wiper- Spare nylon rivets

Prusa Research Core One L to CORE One L + upgrade kit

Prusa CORE One L to CORE One L+ upgrade

IN STOCK: 0

$35.99

{"id":9404503326956,"title":"Prusa CORE One L to CORE One L+ upgrade","handle":"prusa-core-one-l-to-core-one-l-upgrade","description":"\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003eElevate your printing experience effortlessly. This simple upgrade kit includes high-performance GT1.5 belts and a built-in nozzle wiper to deliver improve overall user experience and print quality.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage contents\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e- Belts \u0026amp; pulleys GT1.5\u003cbr\u003e- Nozzle wiper\u003cbr\u003e- Spare nylon rivets\u003c\/p\u003e","published_at":"2026-09-03T13:42:48-04:00","created_at":"2026-09-03T13:20:54-04:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":["CORE One L"],"price":3599,"price_min":3599,"price_max":3599,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":48303316762860,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-UPG-CRO-00L-PLUS","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Prusa CORE One L to CORE One L+ upgrade","public_title":null,"options":["Default Title"],"price":3599,"weight":160,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_Research_Core_One_L_to_CORE_One_L_plus_upgrade_kit_Product_Picture.webp?v=1788456581"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_Research_Core_One_L_to_CORE_One_L_plus_upgrade_kit_Product_Picture.webp?v=1788456581","options":["Title"],"media":[{"alt":"Prusa Research Core One L to CORE One L + upgrade kit","id":38080228262124,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_Research_Core_One_L_to_CORE_One_L_plus_upgrade_kit_Product_Picture.webp?v=1788456581"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_Research_Core_One_L_to_CORE_One_L_plus_upgrade_kit_Product_Picture.webp?v=1788456581","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003eElevate your printing experience effortlessly. This simple upgrade kit includes high-performance GT1.5 belts and a built-in nozzle wiper to deliver improve overall user experience and print quality.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage contents\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e- Belts \u0026amp; pulleys GT1.5\u003cbr\u003e- Nozzle wiper\u003cbr\u003e- Spare nylon rivets\u003c\/p\u003e"}

Prusa CORE One L to CORE One L+ upgrade

$35.99

Summary Elevate your printing experience effortlessly. This simple upgrade kit includes high-performance GT1.5 belts and a built-in nozzle wiper to deliver improve overall user experience and print quality. Package contents - Belts & pulleys GT1.5- Nozzle wiper- Spare nylon rivets

Bambu Lab PETG Basic 1.75mm 1kg

IN STOCK: 0

$28.99

INDX Conversion Kit [CORE One L/+]

IN STOCK: 0

From $1,149.00

{"id":9394300027116,"title":"INDX Conversion Kit [CORE One L\/+]","handle":"indx-conversion-kit-core-one-l","description":"\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003eThe INDX is an \u003cstrong\u003eextremely fast, highly efficient toolchanger system\u003c\/strong\u003e with up to eight independent toolheads that seamlessly integrates with your CORE One+ 3D printer. Each material gets its own dedicated path, so you can combine rigid and flexible parts, use easy-to-remove or dissolvable supports, \u003cstrong\u003eswitch nozzle sizes in the same print,\u003c\/strong\u003e and \u003cstrong\u003eprint multi-color models without throwing half of the spool to waste.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003ch2\u003eThe INDX - A brief overview\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThree numbers that define the INDX\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eUp to 8 Tools\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMBINE COLORS \u0026amp; MATERIALS\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFor beautiful, colorful prints with virtually zero waste and no color cross-contamination\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eOnly ~12 s\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePer Material Swap\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe INDX is the fastest 8-tool solution on the market, bar none\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e~0.013 g\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlastic waste per one swap\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eNo huge pile of plastic poop next to your printer, no massive wipe tower stealing print volume\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eWhat's in the conversion kit\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eYou can pick the 8-Tool kit or a 4-Tool kit (it can be later upgraded to 8 tools). In both cases, you will receive everything you need to install the kit, including a toolset and an easy-to-follow guide. The installation requires you to diassemble a part of your machine, remove the extruder and install the new parts. Users report it takes them about 5-6 hours.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe CORE One L+ with the INDX upgrade installed has a print volume of 298×275×330mm.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eThe Innovations that Drive the INDX\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eOnly one active component - less complexity, lower price, easier to use.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePrinting with up to 8 materials may seem like a complex job. Here's how Prusa made it so effortless.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eHigh‑Speed Nozzle Swapping in Just 12 Seconds\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSingle-nozzle multi-material systems spend roughly 42 seconds on every single filament swap. They must retract, cut, feed, and flush the hotend, wasting time and plastic on every layer. The INDX toolchanger is much more efficient - requires merely 12s per change.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%; height: auto;\" autoplay=\"autoplay\" controls=\"controls\" muted=\"\" loop=\"loop\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/1e14b35b01904edd8bd3bac319e3bfbf.mp4\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eCold in the Dock, Hot in Seconds\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe moving head carries an induction coil which heats the nozzle wirelessly in seconds. It grips a nozzle, brings it to working temperature nearly instantly, and lets it cool again the moment it parks, so it does not ooze.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/1a881070-cf2a-4a29-9f2d-2eba6b92581f_c950b398-156c-49d4-b90c-5f22646a0880.avif?v=1787864439\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eActive Head, Passive Toolchangers\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eEach parked tool is a nozzle and a dock - no electronics. All the intelligence lives in the head that collects them, so adding four more tools is inexpensive - it's four passive nozzle instead of four active toolheads.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/fb1aeb95-3355-481f-b616-aca037f7d655_1e47435d-94c8-4c0a-9737-283031d06873.avif?v=1787864497\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eThe nozzle measures the bed before every print\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe tip presses down on the sheet and a load cell reads the force, so the machine knows exactly where the bed is. This is much more precise than optical solutions, and you can switch nozzles and tools as much as you want without recalibrating the printer every time.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/be1ccd7d-ce89-4683-82e3-eb8fe318e590.avif?v=1787864551\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eAdvanced Nozzle Wiper\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe built-in two-way nozzle wiper is the key to beautiful prints and minimum waste. Every time a new tool is picked up, only a tiny fraction of plastic is extruded to stabilize the pressure in the nozzle. The nozzle is cleaned to prevent any stray blobs from contaminating the print.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/29b2b85d-dcae-45d8-8d7c-61ed776d4f19_17c1eb0a-f6d5-468d-b89b-7f01a751fd7a.avif?v=1787864582\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eSelf‑adjusting grip for different materials\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSoft materials need a gentler grip than rigid, fiber-filled ones. The INDX features a unique mechanism that adjusts the drive gear tension automatically, so you can move from TPU to rigid engineering filaments without stopping to retune the extruder.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/videoframe_1573.png?v=1787864628\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eAlways Ready to Print\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eLoad eight filaments, install different nozzle sizes from 0.25 to 0.8. When you start a print, everything's already ready and loaded. Just pick the right tool. If you like to use different filaments and nozzles, and hate constantly swapping everything around, the INDX is the solution for you.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/2ec872b6-1fd2-4219-9cf7-e843f0adc713_11817cfb-dec3-4e70-b9b3-87d7056ee4f8.avif?v=1787864655\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eAutomatic Tool Offset Calibration\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe state-of-the-art offset calibration system is permanently mounted outside the print area.\u003cbr\u003e\u003cstrong\u003e20x Faster than calibration pin:\u003c\/strong\u003e It takes just 15 seconds per toolhead.\u003cbr\u003e\u003cstrong\u003eImproved Repeatability:\u003c\/strong\u003e Streamlines setup while delivering highly consistent results.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/9273529c-f575-4af4-a456-98e807281c46.avif?v=1787864692\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003cthead class=\"voxel-product-description-table-head\"\u003e\n\u003ctr\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003eParameter\u003c\/th\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSystem Type\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eToolchanger with induction-heated nozzles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eMax Tools\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e8 on CORE One L+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eColor Change\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eAbout 12 seconds, about 0.013 g of waste\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eMax Nozzle Temperature\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e300 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eFilament\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e1.75 mm, any brand, no spool chip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eCompatible Nozzle Sizes\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e0.25, 0.4, 0.5, 0.6, 0.8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eStock Nozzles\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e0.4 mm High flow, surface hardened nitrocarburized steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eAccelerometer\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eEmbedded in INDX head\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eHeating System\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eContactless induction coil (on Smart Head)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eTemperature Sensing\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eWireless and contactless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eCompatible Printer\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePrusa CORE One L and L+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eExtrusion System\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eDynamic Dual Drive (DX) auto-adjusting grip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eBuild Volume Impact\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e2mm reduction in X-axis, 15 mm reduction in Y-axis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eBuild Volume With Installed INDX Upgrade\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e298 x 275 x 330 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSupported Materials\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePLA, PETG, ASA, ABS, PC, PA, TPU, PVA, BVOH, and other non-abrasive materials - up to 300°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePrinter Size And Weight With Installed INDX Upgrade\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e23.9 kg; 4-Tool: 600×530×770mm (w×d×h) \/ 8-Tool 700×530×770mm. Add extra 70mm depth if you want to install the Advanced Filtration System\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eWhat's In the Box\u003c\/h5\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003cthead class=\"voxel-product-description-table-head\"\u003e\n\u003ctr\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003eItem\u003c\/th\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePrusa Academy Course - INDX (Digital)\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eWith the INDX upgrade, you get free access to the 3D Printing and Modeling for Beginners course from Prusa Academy.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e3D Printing Handbook + Online Assembly Guide\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eINDX Head\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eINDX Tools\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e4 or 8 tools, depending on the kit version\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eAdvanced Nozzle Wiper\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePlastic Parts\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eFor illustration purposes - actual parts may vary\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eTop Cover\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSpoolholders\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e4 or 8 spoolholders, depending on the kit version\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eFasteners And Accessories\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eFor illustration purposes - actual accessories may vary\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eHaribo Gummi Bears\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2026-08-27T14:00:01-04:00","created_at":"2026-08-27T11:07:33-04:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":["CORE One L\/+"],"price":114900,"price_min":114900,"price_max":154900,"available":false,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":48237018644716,"title":"CORE One L \/ 4 toolheads","option1":"CORE One L","option2":"4 toolheads","option3":null,"sku":"PRU-CKT-INDX-4TL-COL","requires_shipping":true,"taxable":true,"featured_image":{"id":47248929521900,"product_id":9394300027116,"position":2,"created_at":"2026-08-27T11:53:52-04:00","updated_at":"2026-08-27T11:53:54-04:00","alt":"INDX Conversion Kit CORE One L\/+ - 4 toolheads","width":1400,"height":1050,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_L_and_plus_4_toolheads_product_picture.webp?v=1787846034","variant_ids":[48237018644716,48237018710252]},"available":false,"name":"INDX Conversion Kit [CORE One L\/+] - CORE One L \/ 4 toolheads","public_title":"CORE One L \/ 4 toolheads","options":["CORE One L","4 toolheads"],"price":118900,"weight":10000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"featured_media":{"alt":"INDX Conversion Kit CORE One L\/+ - 4 toolheads","id":37945959481580,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_L_and_plus_4_toolheads_product_picture.webp?v=1787846034"}},"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":48237018677484,"title":"CORE One L \/ 8 toolheads","option1":"CORE One L","option2":"8 toolheads","option3":null,"sku":"PRU-CKT-INDX-8TL-COL","requires_shipping":true,"taxable":true,"featured_image":{"id":47248929554668,"product_id":9394300027116,"position":3,"created_at":"2026-08-27T11:53:52-04:00","updated_at":"2026-08-27T11:53:54-04:00","alt":"INDX Conversion Kit CORE One L\/+ - 8 toolheads","width":1400,"height":1050,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_L_and_plus_8_toolheads_product_picture.webp?v=1787846034","variant_ids":[48237018677484,48237018743020]},"available":false,"name":"INDX Conversion Kit [CORE One L\/+] - CORE One L \/ 8 toolheads","public_title":"CORE One L \/ 8 toolheads","options":["CORE One L","8 toolheads"],"price":154900,"weight":11000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"featured_media":{"alt":"INDX Conversion Kit CORE One L\/+ - 8 toolheads","id":37945959514348,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_L_and_plus_8_toolheads_product_picture.webp?v=1787846034"}},"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":48237018710252,"title":"CORE One L Plus \/ 4 toolheads","option1":"CORE One L Plus","option2":"4 toolheads","option3":null,"sku":"PRU-CKT-INDX-4TL-CLP","requires_shipping":true,"taxable":true,"featured_image":{"id":47248929521900,"product_id":9394300027116,"position":2,"created_at":"2026-08-27T11:53:52-04:00","updated_at":"2026-08-27T11:53:54-04:00","alt":"INDX Conversion Kit CORE One L\/+ - 4 toolheads","width":1400,"height":1050,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_L_and_plus_4_toolheads_product_picture.webp?v=1787846034","variant_ids":[48237018644716,48237018710252]},"available":false,"name":"INDX Conversion Kit [CORE One L\/+] - CORE One L Plus \/ 4 toolheads","public_title":"CORE One L Plus \/ 4 toolheads","options":["CORE One L Plus","4 toolheads"],"price":114900,"weight":10000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"featured_media":{"alt":"INDX Conversion Kit CORE One L\/+ - 4 toolheads","id":37945959481580,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_L_and_plus_4_toolheads_product_picture.webp?v=1787846034"}},"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":48237018743020,"title":"CORE One L Plus \/ 8 toolheads","option1":"CORE One L Plus","option2":"8 toolheads","option3":null,"sku":"PRU-CKT-INDX-8TL-CLP","requires_shipping":true,"taxable":true,"featured_image":{"id":47248929554668,"product_id":9394300027116,"position":3,"created_at":"2026-08-27T11:53:52-04:00","updated_at":"2026-08-27T11:53:54-04:00","alt":"INDX Conversion Kit CORE One L\/+ - 8 toolheads","width":1400,"height":1050,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_L_and_plus_8_toolheads_product_picture.webp?v=1787846034","variant_ids":[48237018677484,48237018743020]},"available":false,"name":"INDX Conversion Kit [CORE One L\/+] - CORE One L Plus \/ 8 toolheads","public_title":"CORE One L Plus \/ 8 toolheads","options":["CORE One L Plus","8 toolheads"],"price":150900,"weight":11000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"featured_media":{"alt":"INDX Conversion Kit CORE One L\/+ - 8 toolheads","id":37945959514348,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_L_and_plus_8_toolheads_product_picture.webp?v=1787846034"}},"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_L_and_plus_thumbnail.webp?v=1787845997","\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_L_and_plus_4_toolheads_product_picture.webp?v=1787846034","\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_L_and_plus_8_toolheads_product_picture.webp?v=1787846034"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_L_and_plus_thumbnail.webp?v=1787845997","options":["Which printer do I have?","Number of INDX printer toolheads"],"media":[{"alt":"INDX Conversion Kit CORE One L\/+ thumbnail","id":37945955975404,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_L_and_plus_thumbnail.webp?v=1787845997"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_L_and_plus_thumbnail.webp?v=1787845997","width":1400},{"alt":"INDX Conversion Kit CORE One L\/+ - 4 toolheads","id":37945959481580,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_L_and_plus_4_toolheads_product_picture.webp?v=1787846034"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_L_and_plus_4_toolheads_product_picture.webp?v=1787846034","width":1400},{"alt":"INDX Conversion Kit CORE One L\/+ - 8 toolheads","id":37945959514348,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_L_and_plus_8_toolheads_product_picture.webp?v=1787846034"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_L_and_plus_8_toolheads_product_picture.webp?v=1787846034","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003eThe INDX is an \u003cstrong\u003eextremely fast, highly efficient toolchanger system\u003c\/strong\u003e with up to eight independent toolheads that seamlessly integrates with your CORE One+ 3D printer. Each material gets its own dedicated path, so you can combine rigid and flexible parts, use easy-to-remove or dissolvable supports, \u003cstrong\u003eswitch nozzle sizes in the same print,\u003c\/strong\u003e and \u003cstrong\u003eprint multi-color models without throwing half of the spool to waste.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003ch2\u003eThe INDX - A brief overview\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThree numbers that define the INDX\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eUp to 8 Tools\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMBINE COLORS \u0026amp; MATERIALS\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFor beautiful, colorful prints with virtually zero waste and no color cross-contamination\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eOnly ~12 s\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePer Material Swap\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe INDX is the fastest 8-tool solution on the market, bar none\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e~0.013 g\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlastic waste per one swap\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eNo huge pile of plastic poop next to your printer, no massive wipe tower stealing print volume\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eWhat's in the conversion kit\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eYou can pick the 8-Tool kit or a 4-Tool kit (it can be later upgraded to 8 tools). In both cases, you will receive everything you need to install the kit, including a toolset and an easy-to-follow guide. The installation requires you to diassemble a part of your machine, remove the extruder and install the new parts. Users report it takes them about 5-6 hours.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe CORE One L+ with the INDX upgrade installed has a print volume of 298×275×330mm.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eThe Innovations that Drive the INDX\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eOnly one active component - less complexity, lower price, easier to use.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePrinting with up to 8 materials may seem like a complex job. Here's how Prusa made it so effortless.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eHigh‑Speed Nozzle Swapping in Just 12 Seconds\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSingle-nozzle multi-material systems spend roughly 42 seconds on every single filament swap. They must retract, cut, feed, and flush the hotend, wasting time and plastic on every layer. The INDX toolchanger is much more efficient - requires merely 12s per change.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%; height: auto;\" autoplay=\"autoplay\" controls=\"controls\" muted=\"\" loop=\"loop\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/1e14b35b01904edd8bd3bac319e3bfbf.mp4\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eCold in the Dock, Hot in Seconds\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe moving head carries an induction coil which heats the nozzle wirelessly in seconds. It grips a nozzle, brings it to working temperature nearly instantly, and lets it cool again the moment it parks, so it does not ooze.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/1a881070-cf2a-4a29-9f2d-2eba6b92581f_c950b398-156c-49d4-b90c-5f22646a0880.avif?v=1787864439\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eActive Head, Passive Toolchangers\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eEach parked tool is a nozzle and a dock - no electronics. All the intelligence lives in the head that collects them, so adding four more tools is inexpensive - it's four passive nozzle instead of four active toolheads.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/fb1aeb95-3355-481f-b616-aca037f7d655_1e47435d-94c8-4c0a-9737-283031d06873.avif?v=1787864497\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eThe nozzle measures the bed before every print\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe tip presses down on the sheet and a load cell reads the force, so the machine knows exactly where the bed is. This is much more precise than optical solutions, and you can switch nozzles and tools as much as you want without recalibrating the printer every time.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/be1ccd7d-ce89-4683-82e3-eb8fe318e590.avif?v=1787864551\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eAdvanced Nozzle Wiper\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe built-in two-way nozzle wiper is the key to beautiful prints and minimum waste. Every time a new tool is picked up, only a tiny fraction of plastic is extruded to stabilize the pressure in the nozzle. The nozzle is cleaned to prevent any stray blobs from contaminating the print.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/29b2b85d-dcae-45d8-8d7c-61ed776d4f19_17c1eb0a-f6d5-468d-b89b-7f01a751fd7a.avif?v=1787864582\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eSelf‑adjusting grip for different materials\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSoft materials need a gentler grip than rigid, fiber-filled ones. The INDX features a unique mechanism that adjusts the drive gear tension automatically, so you can move from TPU to rigid engineering filaments without stopping to retune the extruder.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/videoframe_1573.png?v=1787864628\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eAlways Ready to Print\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eLoad eight filaments, install different nozzle sizes from 0.25 to 0.8. When you start a print, everything's already ready and loaded. Just pick the right tool. If you like to use different filaments and nozzles, and hate constantly swapping everything around, the INDX is the solution for you.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/2ec872b6-1fd2-4219-9cf7-e843f0adc713_11817cfb-dec3-4e70-b9b3-87d7056ee4f8.avif?v=1787864655\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eAutomatic Tool Offset Calibration\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe state-of-the-art offset calibration system is permanently mounted outside the print area.\u003cbr\u003e\u003cstrong\u003e20x Faster than calibration pin:\u003c\/strong\u003e It takes just 15 seconds per toolhead.\u003cbr\u003e\u003cstrong\u003eImproved Repeatability:\u003c\/strong\u003e Streamlines setup while delivering highly consistent results.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/9273529c-f575-4af4-a456-98e807281c46.avif?v=1787864692\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003cthead class=\"voxel-product-description-table-head\"\u003e\n\u003ctr\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003eParameter\u003c\/th\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSystem Type\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eToolchanger with induction-heated nozzles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eMax Tools\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e8 on CORE One L+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eColor Change\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eAbout 12 seconds, about 0.013 g of waste\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eMax Nozzle Temperature\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e300 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eFilament\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e1.75 mm, any brand, no spool chip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eCompatible Nozzle Sizes\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e0.25, 0.4, 0.5, 0.6, 0.8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eStock Nozzles\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e0.4 mm High flow, surface hardened nitrocarburized steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eAccelerometer\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eEmbedded in INDX head\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eHeating System\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eContactless induction coil (on Smart Head)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eTemperature Sensing\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eWireless and contactless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eCompatible Printer\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePrusa CORE One L and L+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eExtrusion System\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eDynamic Dual Drive (DX) auto-adjusting grip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eBuild Volume Impact\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e2mm reduction in X-axis, 15 mm reduction in Y-axis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eBuild Volume With Installed INDX Upgrade\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e298 x 275 x 330 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSupported Materials\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePLA, PETG, ASA, ABS, PC, PA, TPU, PVA, BVOH, and other non-abrasive materials - up to 300°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePrinter Size And Weight With Installed INDX Upgrade\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e23.9 kg; 4-Tool: 600×530×770mm (w×d×h) \/ 8-Tool 700×530×770mm. Add extra 70mm depth if you want to install the Advanced Filtration System\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eWhat's In the Box\u003c\/h5\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003cthead class=\"voxel-product-description-table-head\"\u003e\n\u003ctr\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003eItem\u003c\/th\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePrusa Academy Course - INDX (Digital)\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eWith the INDX upgrade, you get free access to the 3D Printing and Modeling for Beginners course from Prusa Academy.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e3D Printing Handbook + Online Assembly Guide\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eINDX Head\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eINDX Tools\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e4 or 8 tools, depending on the kit version\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eAdvanced Nozzle Wiper\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePlastic Parts\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eFor illustration purposes - actual parts may vary\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eTop Cover\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSpoolholders\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e4 or 8 spoolholders, depending on the kit version\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eFasteners And Accessories\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eFor illustration purposes - actual accessories may vary\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eHaribo Gummi Bears\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e"}

INDX Conversion Kit [CORE One L/+]

$1,189.00

Summary The INDX is an extremely fast, highly efficient toolchanger system with up to eight independent toolheads that seamlessly integrates with your CORE One+ 3D printer. Each material gets its own dedicated path, so you can combine rigid and flexible parts, use easy-to-remove or dissolvable supports, switch nozzle sizes in the same print, and...

Which printer do I have?

Number of INDX printer toolheads

CORE One L

CORE One L Plus

4 toolheads

8 toolheads

INDX Conversion Kit [CORE One/+ & Gen2]

IN STOCK: 0

From $1,069.00

{"id":9392368156908,"title":"INDX Conversion Kit [CORE One\/+ \u0026 Gen2]","handle":"indx-conversion-kit-for-core-one","description":"\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003eThe INDX is an \u003cstrong\u003eextremely fast, highly efficient toolchanger system\u003c\/strong\u003e with up to eight independent toolheads that seamlessly integrates with your CORE One+ 3D printer. Each material gets its own dedicated path, so you can combine rigid and flexible parts, use easy-to-remove or dissolvable supports, \u003cstrong\u003eswitch nozzle sizes in the same print,\u003c\/strong\u003e and \u003cstrong\u003eprint multi-color models without throwing half of the spool to waste.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003ch2\u003eWhat can you achieve with 8 nozzles?\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMulti-material goes beyond color. It lets you build functional parts that combine properties no single filament can deliver.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMulti‑color without the usual mess\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eNo wipe tower, no piles of plastic around the printer\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/b917b2ac-2d04-43ff-b455-ba8ebe972d43.avif?v=1787599190\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSupports that are easier to remove\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eWater-soluble or break-away organic supports\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/40779616-8796-404c-af15-bc7adbd180e2.avif?v=1787599228\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRigid + Flexible in One Print\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAdd a rubber-like grip to functional prints\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/90cf5e07-dd2d-4d97-af5b-6aad1c42ff9b.avif?v=1787599263\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDifferent nozzle sizes always at the ready\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eHave all your favorite materials always loaded\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/1c3e5c2c-db11-46af-ba38-70dce4833c19.avif?v=1787599291\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eLightning-Fast Toolchanger\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eKeep all the features of your CORE One+, like high-speed printing and a smart ventilation system, and give it a massive boost with this extremely fast tool-changing system. The INDX toolchanger achieves unbeatable results thanks to rapid induction heating of its nozzles. It doesn't waste time on wipe towers.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOnly with the INDX, you'll get beautiful, multi-material 3D prints faster than ever before - and with all the benefits only a toolchanger can provide.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%; height: auto;\" autoplay=\"autoplay\" controls=\"controls\" muted=\"\" loop=\"loop\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/1e14b35b01904edd8bd3bac319e3bfbf.mp4\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReal Performance Metric\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003eTrue Toolchange Time: ~12 seconds per change\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWe measure toolchange time from the last extrusion on one material to the first extrusion on the next, on the model itself. This avoids inflated and misleading numbers based on partial steps. The ~12 seconds per change for PLA is the time between when one nozzle leaves the printed part until the second nozzle starts printing.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eThree Major Benefits for Better 3D Printing\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo Wipe Towers \/ Purge Blocks\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eNearly all multi-material systems place a block in the corner of your print sheet where the nozzle purges excess filament. The INDX doesn't do that. You can use up to 248×205×270 mm for your prints!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/29b2b85d-dcae-45d8-8d7c-61ed776d4f19.avif?v=1787666093\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoors Closed, at All Times\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eMany enclosed printers require you to keep the chamber door open when printing PLA or PETG, eliminating the benefits of the closed chamber. The INDX retains the unique ventilation system, so you can keep the doors closed.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/910dd9df-cc66-4a5f-a006-bdb92748bf7c.avif?v=1787666150\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eThe Innovations that Drive the INDX\u003c\/h2\u003e\n\u003ch3\u003eOnly one active component - less complexity, lower price, easier to use.\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSmart Active Head\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003eFast Induction Heating\u003c\/h4\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe INDX Smart Head contains an induction coil - just like an induction cooktop. When it picks up a toolhead, it generates a high-frequency magnetic field that heats the nozzle from cold to printing temperature in seconds. When the tool is parked, it cools rapidly. No oozing, no stringing from idle nozzles.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/1a881070-cf2a-4a29-9f2d-2eba6b92581f.avif?v=1787667143\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHIGH-FLOW NOZZLES\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003ePassive Toolheads\u003c\/h4\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eUsing passive tools without any electronics is a massive advantage: they are less complex and more reliable. Adding a fifth, sixth, or eighth tool means adding a nozzle and a parking dock - not another full print head. By default, the INDX comes with high-flow 0.4 mm nozzles.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/fb1aeb95-3355-481f-b616-aca037f7d655.avif?v=1787667193\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Dynamic Extruder\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003eSelf‑adjusting grip for different materials\u003c\/h4\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSoft materials need a gentler grip than rigid, fiber-filled ones. The INDX features a unique mechanism that adjusts the drive gear tension automatically, so you can move from TPU to rigid engineering filaments without stopping to retune the extruder.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%; height: auto;\" autoplay=\"autoplay\" controls=\"controls\" muted=\"\" loop=\"loop\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/42075a690cd044b3bc93acca5d8a14a9.mp4\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e8 materials conveniently loaded\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003eAlways Ready to Print\u003c\/h4\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eLoad eight filaments, install different nozzle sizes from 0.25 to 0.8. When you start a print, everything's already ready and loaded. Just pick the right tool. If you like to use different filaments and nozzles, and hate constantly swapping everything around, the INDX is the solution for you.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/2ec872b6-1fd2-4219-9cf7-e843f0adc713.avif?v=1787667445\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003cthead class=\"voxel-product-description-table-head\"\u003e\n\u003ctr\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003eParameter\u003c\/th\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSystem Type\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePassive toolchanger with induction-heated nozzles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eMax Tools\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e8 on CORE One\/+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eMax Nozzle Temperature\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e300 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eFilament Diameter\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eCompatible Nozzle Sizes\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e0.25, 0.4, 0.5, 0.6, 0.8, 1.0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eNozzle Type\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eHigh-flow (CHT), nitrocarburized steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eHeating System\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eContactless induction coil (on Smart Head)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eTemperature Sensing\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eWireless and contactless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eExtrusion System\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eDynamic Dual Drive (DX) auto-adjusting grip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eTool Coupling\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eMechanical Maxwell coupling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eBuild Volume Impact\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e2mm reduction in X-axis, 15 mm reduction in Y-axis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eBuild Volume With INDX Installed\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e248×205×270mm (X×Y×Z)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eCompatible Printer\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePrusa CORE One\/+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSupported Materials\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePLA, PETG, ASA, ABS, PC, PA, TPU, PVA, BVOH, and other non-abrasive materials - up to 300°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eWhat's In the Box\u003c\/h5\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003cthead class=\"voxel-product-description-table-head\"\u003e\n\u003ctr\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003eItem\u003c\/th\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003ePrusa CORE One+\u003c\/th\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003ePrusa CORE One+ (Gen 2)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eINDX Head\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eIncluded\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eINDX Tools\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e4× or 8×, depending on selected version\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e4× or 8×, depending on selected version\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePlastic Parts\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eIncluded\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eTop Cover\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eIncluded\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSpoolholders\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e4× or 8×, depending on selected version\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e4× or 8×, depending on selected version\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eFasteners \u0026amp; Other Accessories\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eIncluded\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eNozzle Cleaning System\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eAdvanced nozzle wiper made for induction-heated nozzles\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eAdvanced nozzle wiper made for induction-heated nozzles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eGT 1.5 Belts And Matching Pulleys\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eIncluded - smoother surfaces\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eNot included - already present on the printer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eThermal Expansion Joints\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eIncluded - faster print starts\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eNot included - already installed on the printer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2026-08-25T10:17:51-04:00","created_at":"2026-08-24T12:17:54-04:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":["CORE One\/+"],"price":106900,"price_min":106900,"price_max":149900,"available":false,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":48227642179820,"title":"CORE One\/+ \/ 4 toolheads","option1":"CORE One\/+","option2":"4 toolheads","option3":null,"sku":"PRU-CKT-INDX-4TL-COP","requires_shipping":true,"taxable":true,"featured_image":{"id":47218737316076,"product_id":9392368156908,"position":2,"created_at":"2026-08-24T14:09:29-04:00","updated_at":"2026-08-24T14:09:30-04:00","alt":"INDX Conversion Kit CORE One\/+ - 4 toolheads","width":1400,"height":1050,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_plus_4_toolheads_product_picture.webp?v=1787594970","variant_ids":[48227642179820]},"available":false,"name":"INDX Conversion Kit [CORE One\/+ \u0026 Gen2] - CORE One\/+ \/ 4 toolheads","public_title":"CORE One\/+ \/ 4 toolheads","options":["CORE One\/+","4 toolheads"],"price":113900,"weight":10000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"featured_media":{"alt":"INDX Conversion Kit CORE One\/+ - 4 toolheads","id":37915989770476,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_plus_4_toolheads_product_picture.webp?v=1787594970"}},"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":48227642212588,"title":"CORE One\/+ \/ 8 toolheads","option1":"CORE One\/+","option2":"8 toolheads","option3":null,"sku":"PRU-CKT-INDX-8TL-COP","requires_shipping":true,"taxable":true,"featured_image":{"id":47218737447148,"product_id":9392368156908,"position":3,"created_at":"2026-08-24T14:09:41-04:00","updated_at":"2026-08-24T14:09:43-04:00","alt":null,"width":1400,"height":1050,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_plus_8_toolheads_product_picture.webp?v=1787594983","variant_ids":[48227642212588]},"available":false,"name":"INDX Conversion Kit [CORE One\/+ \u0026 Gen2] - CORE One\/+ \/ 8 toolheads","public_title":"CORE One\/+ \/ 8 toolheads","options":["CORE One\/+","8 toolheads"],"price":149900,"weight":11000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"featured_media":{"alt":null,"id":37915989901548,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_plus_8_toolheads_product_picture.webp?v=1787594983"}},"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":48227646570732,"title":"CORE One\/+ (Gen 2) \/ 4 toolheads","option1":"CORE One\/+ (Gen 2)","option2":"4 toolheads","option3":null,"sku":"PRU-CKT-INDX-4TL-CO2","requires_shipping":true,"taxable":true,"featured_image":{"id":47218737905900,"product_id":9392368156908,"position":4,"created_at":"2026-08-24T14:09:55-04:00","updated_at":"2026-08-24T14:09:56-04:00","alt":null,"width":1400,"height":1050,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_plus_Gen2_4_toolheads_product_picture.webp?v=1787594996","variant_ids":[48227646570732]},"available":false,"name":"INDX Conversion Kit [CORE One\/+ \u0026 Gen2] - CORE One\/+ (Gen 2) \/ 4 toolheads","public_title":"CORE One\/+ (Gen 2) \/ 4 toolheads","options":["CORE One\/+ (Gen 2)","4 toolheads"],"price":106900,"weight":10000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"featured_media":{"alt":null,"id":37915990360300,"position":4,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_plus_Gen2_4_toolheads_product_picture.webp?v=1787594996"}},"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":48227646603500,"title":"CORE One\/+ (Gen 2) \/ 8 toolheads","option1":"CORE One\/+ (Gen 2)","option2":"8 toolheads","option3":null,"sku":"PRU-CKT-INDX-8TL-CO2","requires_shipping":true,"taxable":true,"featured_image":{"id":47218737971436,"product_id":9392368156908,"position":5,"created_at":"2026-08-24T14:10:04-04:00","updated_at":"2026-08-24T14:10:05-04:00","alt":null,"width":1400,"height":1050,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_plus_Gen2_8_toolheads_product_picture.webp?v=1787595005","variant_ids":[48227646603500]},"available":false,"name":"INDX Conversion Kit [CORE One\/+ \u0026 Gen2] - CORE One\/+ (Gen 2) \/ 8 toolheads","public_title":"CORE One\/+ (Gen 2) \/ 8 toolheads","options":["CORE One\/+ (Gen 2)","8 toolheads"],"price":142900,"weight":11000,"compare_at_price":null,"inventory_quantity":-1,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"featured_media":{"alt":null,"id":37915990425836,"position":5,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_plus_Gen2_8_toolheads_product_picture.webp?v=1787595005"}},"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_plus_thumbnail.webp?v=1787668705","\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_plus_4_toolheads_product_picture.webp?v=1787594970","\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_plus_8_toolheads_product_picture.webp?v=1787594983","\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_plus_Gen2_4_toolheads_product_picture.webp?v=1787594996","\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_plus_Gen2_8_toolheads_product_picture.webp?v=1787595005"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_plus_thumbnail.webp?v=1787668705","options":["Which printer do I have?","Number of INDX printer toolheads"],"media":[{"alt":"INDX Conversion Kit CORE One\/+ \u0026 Gen2 Thumbnail","id":37928115273964,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_plus_thumbnail.webp?v=1787668705"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_plus_thumbnail.webp?v=1787668705","width":1400},{"alt":"INDX Conversion Kit CORE One\/+ - 4 toolheads","id":37915989770476,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_plus_4_toolheads_product_picture.webp?v=1787594970"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_plus_4_toolheads_product_picture.webp?v=1787594970","width":1400},{"alt":null,"id":37915989901548,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_plus_8_toolheads_product_picture.webp?v=1787594983"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_plus_8_toolheads_product_picture.webp?v=1787594983","width":1400},{"alt":null,"id":37915990360300,"position":4,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_plus_Gen2_4_toolheads_product_picture.webp?v=1787594996"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_plus_Gen2_4_toolheads_product_picture.webp?v=1787594996","width":1400},{"alt":null,"id":37915990425836,"position":5,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_plus_Gen2_8_toolheads_product_picture.webp?v=1787595005"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/INDX_Conversion_Kit_CORE_One_plus_Gen2_8_toolheads_product_picture.webp?v=1787595005","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003eThe INDX is an \u003cstrong\u003eextremely fast, highly efficient toolchanger system\u003c\/strong\u003e with up to eight independent toolheads that seamlessly integrates with your CORE One+ 3D printer. Each material gets its own dedicated path, so you can combine rigid and flexible parts, use easy-to-remove or dissolvable supports, \u003cstrong\u003eswitch nozzle sizes in the same print,\u003c\/strong\u003e and \u003cstrong\u003eprint multi-color models without throwing half of the spool to waste.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003ch2\u003eWhat can you achieve with 8 nozzles?\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMulti-material goes beyond color. It lets you build functional parts that combine properties no single filament can deliver.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMulti‑color without the usual mess\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eNo wipe tower, no piles of plastic around the printer\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/b917b2ac-2d04-43ff-b455-ba8ebe972d43.avif?v=1787599190\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSupports that are easier to remove\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eWater-soluble or break-away organic supports\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/40779616-8796-404c-af15-bc7adbd180e2.avif?v=1787599228\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRigid + Flexible in One Print\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAdd a rubber-like grip to functional prints\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/90cf5e07-dd2d-4d97-af5b-6aad1c42ff9b.avif?v=1787599263\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDifferent nozzle sizes always at the ready\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eHave all your favorite materials always loaded\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/1c3e5c2c-db11-46af-ba38-70dce4833c19.avif?v=1787599291\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eLightning-Fast Toolchanger\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eKeep all the features of your CORE One+, like high-speed printing and a smart ventilation system, and give it a massive boost with this extremely fast tool-changing system. The INDX toolchanger achieves unbeatable results thanks to rapid induction heating of its nozzles. It doesn't waste time on wipe towers.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOnly with the INDX, you'll get beautiful, multi-material 3D prints faster than ever before - and with all the benefits only a toolchanger can provide.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%; height: auto;\" autoplay=\"autoplay\" controls=\"controls\" muted=\"\" loop=\"loop\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/1e14b35b01904edd8bd3bac319e3bfbf.mp4\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReal Performance Metric\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003eTrue Toolchange Time: ~12 seconds per change\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWe measure toolchange time from the last extrusion on one material to the first extrusion on the next, on the model itself. This avoids inflated and misleading numbers based on partial steps. The ~12 seconds per change for PLA is the time between when one nozzle leaves the printed part until the second nozzle starts printing.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eThree Major Benefits for Better 3D Printing\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo Wipe Towers \/ Purge Blocks\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eNearly all multi-material systems place a block in the corner of your print sheet where the nozzle purges excess filament. The INDX doesn't do that. You can use up to 248×205×270 mm for your prints!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/29b2b85d-dcae-45d8-8d7c-61ed776d4f19.avif?v=1787666093\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoors Closed, at All Times\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eMany enclosed printers require you to keep the chamber door open when printing PLA or PETG, eliminating the benefits of the closed chamber. The INDX retains the unique ventilation system, so you can keep the doors closed.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/910dd9df-cc66-4a5f-a006-bdb92748bf7c.avif?v=1787666150\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eThe Innovations that Drive the INDX\u003c\/h2\u003e\n\u003ch3\u003eOnly one active component - less complexity, lower price, easier to use.\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSmart Active Head\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003eFast Induction Heating\u003c\/h4\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe INDX Smart Head contains an induction coil - just like an induction cooktop. When it picks up a toolhead, it generates a high-frequency magnetic field that heats the nozzle from cold to printing temperature in seconds. When the tool is parked, it cools rapidly. No oozing, no stringing from idle nozzles.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/1a881070-cf2a-4a29-9f2d-2eba6b92581f.avif?v=1787667143\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHIGH-FLOW NOZZLES\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003ePassive Toolheads\u003c\/h4\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eUsing passive tools without any electronics is a massive advantage: they are less complex and more reliable. Adding a fifth, sixth, or eighth tool means adding a nozzle and a parking dock - not another full print head. By default, the INDX comes with high-flow 0.4 mm nozzles.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/fb1aeb95-3355-481f-b616-aca037f7d655.avif?v=1787667193\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Dynamic Extruder\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003eSelf‑adjusting grip for different materials\u003c\/h4\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSoft materials need a gentler grip than rigid, fiber-filled ones. The INDX features a unique mechanism that adjusts the drive gear tension automatically, so you can move from TPU to rigid engineering filaments without stopping to retune the extruder.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cvideo style=\"width: 100%; height: auto;\" autoplay=\"autoplay\" controls=\"controls\" muted=\"\" loop=\"loop\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/42075a690cd044b3bc93acca5d8a14a9.mp4\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e8 materials conveniently loaded\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003eAlways Ready to Print\u003c\/h4\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eLoad eight filaments, install different nozzle sizes from 0.25 to 0.8. When you start a print, everything's already ready and loaded. Just pick the right tool. If you like to use different filaments and nozzles, and hate constantly swapping everything around, the INDX is the solution for you.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/2ec872b6-1fd2-4219-9cf7-e843f0adc713.avif?v=1787667445\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003cthead class=\"voxel-product-description-table-head\"\u003e\n\u003ctr\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003eParameter\u003c\/th\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSystem Type\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePassive toolchanger with induction-heated nozzles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eMax Tools\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e8 on CORE One\/+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eMax Nozzle Temperature\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e300 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eFilament Diameter\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eCompatible Nozzle Sizes\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e0.25, 0.4, 0.5, 0.6, 0.8, 1.0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eNozzle Type\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eHigh-flow (CHT), nitrocarburized steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eHeating System\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eContactless induction coil (on Smart Head)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eTemperature Sensing\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eWireless and contactless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eExtrusion System\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eDynamic Dual Drive (DX) auto-adjusting grip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eTool Coupling\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eMechanical Maxwell coupling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eBuild Volume Impact\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e2mm reduction in X-axis, 15 mm reduction in Y-axis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eBuild Volume With INDX Installed\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e248×205×270mm (X×Y×Z)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eCompatible Printer\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePrusa CORE One\/+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSupported Materials\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePLA, PETG, ASA, ABS, PC, PA, TPU, PVA, BVOH, and other non-abrasive materials - up to 300°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eWhat's In the Box\u003c\/h5\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003cthead class=\"voxel-product-description-table-head\"\u003e\n\u003ctr\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003eItem\u003c\/th\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003ePrusa CORE One+\u003c\/th\u003e\n\u003cth class=\"voxel-product-description-table-element\"\u003ePrusa CORE One+ (Gen 2)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eINDX Head\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eIncluded\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eINDX Tools\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e4× or 8×, depending on selected version\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e4× or 8×, depending on selected version\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003ePlastic Parts\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eIncluded\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eTop Cover\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eIncluded\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eSpoolholders\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e4× or 8×, depending on selected version\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e4× or 8×, depending on selected version\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eFasteners \u0026amp; Other Accessories\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eIncluded\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eNozzle Cleaning System\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eAdvanced nozzle wiper made for induction-heated nozzles\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eAdvanced nozzle wiper made for induction-heated nozzles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eGT 1.5 Belts And Matching Pulleys\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eIncluded - smoother surfaces\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eNot included - already present on the printer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eThermal Expansion Joints\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eIncluded - faster print starts\u003c\/td\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003eNot included - already installed on the printer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e"}

INDX Conversion Kit CORE One/+ - 4 toolheads

INDX Conversion Kit [CORE One/+ & Gen2]

$1,139.00

Which printer do I have?

Number of INDX printer toolheads

CORE One/+

CORE One/+ (Gen 2)

4 toolheads

8 toolheads

Denture Base Resin 1L (Form 4B) - Light Pink

Denture Base Resin V2 1L (Form 4)

IN STOCK: 6

$786.50

{"id":9312443662572,"title":"Denture Base Resin V2 1L (Form 4)","handle":"denture-base-resin-v2-1l-form-4b","description":"\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003eHigh-impact denture base material for lifelike, long-lasting prosthetics\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eDenture Base Resin V2 is a high-impact, Class II biocompatible material for producing durable, natural-looking dentures that exceed ISO standards. Three semi-translucent pink shades, broad workflow compatibility, and a streamlined post-processing protocol give dental professionals the confidence to guarantee their work for years of patient wear.\u003c\/p\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003ch4\u003eWhy Choose Denture Base v2 Resin\u003c\/h4\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eDenture Base v2 Resin enables dental professionals to 3D print durable, high-impact denture bases with lifelike aesthetics using a streamlined and validated process.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLong-Term Performance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eDeliver dentures with the toughness to stand up to everyday wear and accidental drops -- along with the compatibility to be relined with a range of hard and soft materials and repaired using standard repair methods -- giving dentists and lab technicians the confidence to guarantee their work for years of patient wear.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLifelike, Adaptive Aesthetics\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eProvide natural-looking gingiva in three shades — Original, Light, and Dark Pink — and optimal translucency that blends seamlessly with the patient's tissue.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStreamlined, Validated Process\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eReach the final denture in fewer steps without additional equipment – a 10-minute IPA wash, 20-minute post-cure, and no extra solvents – with the ease of an auto-dispense cartridge and the fully validated Formlabs ecosystem.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOpen, Flexible Workflow\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ePair with Formlabs Premium Teeth Resin and streamline denture assembly using the Denture Base V2 resin as a bonding agent — or stay flexible with full compatibility for milled, carded, or third-party 3D printed teeth and 3rd party bonding materials.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eApplications\u003c\/h4\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eDenture Base v2 Resin is expanding access to durable, lifelike digital dentures with a streamlined, validated, and cost-effective manufacturing solution.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eMaterial Properties\u003c\/h4\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDenture Base Resin V2\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\n\u003cp\u003e\u003cb\u003eFlexural Strength\u003c\/b\u003e\u003cbr\u003e67 MPa\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\n\u003cp\u003e\u003cb\u003eFlexural Modulus\u003c\/b\u003e\u003cbr\u003e2200 MPa\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\n\u003cp\u003e\u003cb\u003eMaximum Stress Intensity Factor\u003c\/b\u003e\u003cbr\u003e2.4 MPa.m1\/2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\n\u003cp\u003e\u003cb\u003eWork of Fracture\u003c\/b\u003e\u003cbr\u003e1000 J\/m2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca class=\"voxel-product-description-link\" rel=\"noopener\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/26011107-TDS-ENUS-0.pdf?v=1783975113\" target=\"_blank\"\u003eDownload Digital Dentures Technical Data Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e* Material properties may vary based on part geometry, print orientation, print settings, and temperature. Data for post-cured samples were measured on Type I tensile bars printed on a Form 4B printer with 100 μm Denture Base Resin V2 settings, washed in a Form Wash for 10 minutes in ≥99% Isopropyl Alcohol, and post-cured at 80°C for 30 minutes in a Form Cure L v1. Testing performed at NAMSA World Headquarters, OH, USA\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003ePost-Processing\u003c\/h4\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWashing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe foundational step in any SLA post-processing workflow is to remove excess resin on the surface of the parts through an alcohol wash. Please refer to the material's manufacturing guide\/IFU for washing instructions.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCuring\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFor biocompatible materials, post-curing is necessary to achieve the safety standards determined by regulatory agencies. Please follow the material’s manufacturing guide\/IFU for proper post-processing.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/2102513-IU-ENUS-0.pdf?v=1783976239\" class=\"voxel-product-description-link\" target=\"_blank\"\u003eInstructions for Use: Denture Base Resin V2\u003c\/a\u003e\u003c\/p\u003e","published_at":"2026-07-14T09:08:32-04:00","created_at":"2026-07-13T17:01:35-04:00","vendor":"Formlabs","type":"Formlabs Resins","tags":["Form 4B","Form 4BL"],"price":78650,"price_min":78650,"price_max":78650,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47939514532076,"title":"Light Pink (LP)","option1":"Light Pink (LP)","option2":null,"option3":null,"sku":"FLB-RSN-DBS-0V2-LPK","requires_shipping":true,"taxable":true,"featured_image":{"id":46764233883884,"product_id":9312443662572,"position":1,"created_at":"2026-07-13T17:40:16-04:00","updated_at":"2026-07-13T17:40:17-04:00","alt":"Denture Base Resin 1L (Form 4B) - Light Pink","width":1400,"height":1050,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Denture_Base_Resin_1L_Form_4B_Light_Pink_Product_Picture.webp?v=1783978817","variant_ids":[47939514532076]},"available":true,"name":"Denture Base Resin V2 1L (Form 4) - Light Pink (LP)","public_title":"Light Pink (LP)","options":["Light Pink (LP)"],"price":78650,"weight":1500,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"continue","barcode":null,"featured_media":{"alt":"Denture Base Resin 1L (Form 4B) - Light Pink","id":37475615637740,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Denture_Base_Resin_1L_Form_4B_Light_Pink_Product_Picture.webp?v=1783978817"}},"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":47939514564844,"title":"Original Pink (OP)","option1":"Original Pink (OP)","option2":null,"option3":null,"sku":"FLB-RSN-DBS-0V2-OPK","requires_shipping":true,"taxable":true,"featured_image":{"id":46763892408556,"product_id":9312443662572,"position":2,"created_at":"2026-07-13T15:53:22-04:00","updated_at":"2026-07-13T15:53:24-04:00","alt":"Denture Base Resin 1L (Form 4B) - Original Pink","width":1400,"height":1050,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Denture_Base_Resin_1L_Form_4B_Product_Picture.webp?v=1783972404","variant_ids":[47939514564844]},"available":true,"name":"Denture Base Resin V2 1L (Form 4) - Original Pink (OP)","public_title":"Original Pink (OP)","options":["Original Pink (OP)"],"price":78650,"weight":1500,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"continue","barcode":null,"featured_media":{"alt":"Denture Base Resin 1L (Form 4B) - Original Pink","id":37475275669740,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Denture_Base_Resin_1L_Form_4B_Product_Picture.webp?v=1783972404"}},"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}},{"id":47939514597612,"title":"Dark Pink (DP)","option1":"Dark Pink (DP)","option2":null,"option3":null,"sku":"FLB-RSN-DBS-0V2-DPK","requires_shipping":true,"taxable":true,"featured_image":{"id":46764233916652,"product_id":9312443662572,"position":3,"created_at":"2026-07-13T17:40:16-04:00","updated_at":"2026-07-13T17:40:17-04:00","alt":"Denture Base Resin 1L (Form 4B) Dark Pink","width":1400,"height":1050,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Denture_Base_Resin_1L_Form_4B_Dark_Pink_Product_Picture.webp?v=1783978817","variant_ids":[47939514597612]},"available":true,"name":"Denture Base Resin V2 1L (Form 4) - Dark Pink (DP)","public_title":"Dark Pink (DP)","options":["Dark Pink (DP)"],"price":78650,"weight":1500,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"continue","barcode":null,"featured_media":{"alt":"Denture Base Resin 1L (Form 4B) Dark Pink","id":37475615670508,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Denture_Base_Resin_1L_Form_4B_Dark_Pink_Product_Picture.webp?v=1783978817"}},"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/Denture_Base_Resin_1L_Form_4B_Light_Pink_Product_Picture.webp?v=1783978817","\/\/www.voxelfactory.com\/cdn\/shop\/files\/Denture_Base_Resin_1L_Form_4B_Product_Picture.webp?v=1783972404","\/\/www.voxelfactory.com\/cdn\/shop\/files\/Denture_Base_Resin_1L_Form_4B_Dark_Pink_Product_Picture.webp?v=1783978817"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Denture_Base_Resin_1L_Form_4B_Light_Pink_Product_Picture.webp?v=1783978817","options":["Color"],"media":[{"alt":"Denture Base Resin 1L (Form 4B) - Light Pink","id":37475615637740,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Denture_Base_Resin_1L_Form_4B_Light_Pink_Product_Picture.webp?v=1783978817"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Denture_Base_Resin_1L_Form_4B_Light_Pink_Product_Picture.webp?v=1783978817","width":1400},{"alt":"Denture Base Resin 1L (Form 4B) - Original Pink","id":37475275669740,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Denture_Base_Resin_1L_Form_4B_Product_Picture.webp?v=1783972404"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Denture_Base_Resin_1L_Form_4B_Product_Picture.webp?v=1783972404","width":1400},{"alt":"Denture Base Resin 1L (Form 4B) Dark Pink","id":37475615670508,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Denture_Base_Resin_1L_Form_4B_Dark_Pink_Product_Picture.webp?v=1783978817"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Denture_Base_Resin_1L_Form_4B_Dark_Pink_Product_Picture.webp?v=1783978817","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003eHigh-impact denture base material for lifelike, long-lasting prosthetics\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eDenture Base Resin V2 is a high-impact, Class II biocompatible material for producing durable, natural-looking dentures that exceed ISO standards. Three semi-translucent pink shades, broad workflow compatibility, and a streamlined post-processing protocol give dental professionals the confidence to guarantee their work for years of patient wear.\u003c\/p\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003ch4\u003eWhy Choose Denture Base v2 Resin\u003c\/h4\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eDenture Base v2 Resin enables dental professionals to 3D print durable, high-impact denture bases with lifelike aesthetics using a streamlined and validated process.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLong-Term Performance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eDeliver dentures with the toughness to stand up to everyday wear and accidental drops -- along with the compatibility to be relined with a range of hard and soft materials and repaired using standard repair methods -- giving dentists and lab technicians the confidence to guarantee their work for years of patient wear.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLifelike, Adaptive Aesthetics\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eProvide natural-looking gingiva in three shades — Original, Light, and Dark Pink — and optimal translucency that blends seamlessly with the patient's tissue.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStreamlined, Validated Process\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eReach the final denture in fewer steps without additional equipment – a 10-minute IPA wash, 20-minute post-cure, and no extra solvents – with the ease of an auto-dispense cartridge and the fully validated Formlabs ecosystem.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOpen, Flexible Workflow\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ePair with Formlabs Premium Teeth Resin and streamline denture assembly using the Denture Base V2 resin as a bonding agent — or stay flexible with full compatibility for milled, carded, or third-party 3D printed teeth and 3rd party bonding materials.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eApplications\u003c\/h4\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eDenture Base v2 Resin is expanding access to durable, lifelike digital dentures with a streamlined, validated, and cost-effective manufacturing solution.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eMaterial Properties\u003c\/h4\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDenture Base Resin V2\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable class=\"voxel-product-description-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\n\u003cp\u003e\u003cb\u003eFlexural Strength\u003c\/b\u003e\u003cbr\u003e67 MPa\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\n\u003cp\u003e\u003cb\u003eFlexural Modulus\u003c\/b\u003e\u003cbr\u003e2200 MPa\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\n\u003cp\u003e\u003cb\u003eMaximum Stress Intensity Factor\u003c\/b\u003e\u003cbr\u003e2.4 MPa.m1\/2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"voxel-product-description-table-element\"\u003e\n\u003cp\u003e\u003cb\u003eWork of Fracture\u003c\/b\u003e\u003cbr\u003e1000 J\/m2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca class=\"voxel-product-description-link\" rel=\"noopener\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/26011107-TDS-ENUS-0.pdf?v=1783975113\" target=\"_blank\"\u003eDownload Digital Dentures Technical Data Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e* Material properties may vary based on part geometry, print orientation, print settings, and temperature. Data for post-cured samples were measured on Type I tensile bars printed on a Form 4B printer with 100 μm Denture Base Resin V2 settings, washed in a Form Wash for 10 minutes in ≥99% Isopropyl Alcohol, and post-cured at 80°C for 30 minutes in a Form Cure L v1. Testing performed at NAMSA World Headquarters, OH, USA\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003ePost-Processing\u003c\/h4\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWashing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe foundational step in any SLA post-processing workflow is to remove excess resin on the surface of the parts through an alcohol wash. Please refer to the material's manufacturing guide\/IFU for washing instructions.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCuring\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFor biocompatible materials, post-curing is necessary to achieve the safety standards determined by regulatory agencies. Please follow the material’s manufacturing guide\/IFU for proper post-processing.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/2102513-IU-ENUS-0.pdf?v=1783976239\" class=\"voxel-product-description-link\" target=\"_blank\"\u003eInstructions for Use: Denture Base Resin V2\u003c\/a\u003e\u003c\/p\u003e"}

Denture Base Resin V2 1L (Form 4)

$786.50

Summary High-impact denture base material for lifelike, long-lasting prosthetics Denture Base Resin V2 is a high-impact, Class II biocompatible material for producing durable, natural-looking dentures that exceed ISO standards. Three semi-translucent pink shades, broad workflow compatibility, and a streamlined post-processing protocol give den...

Color

BioMed Flex 50A Resin 1L (Form 4)

IN STOCK: 2

$499.99

{"id":9311733711084,"title":"BioMed Flex 50A Resin 1L (Form 4)","handle":"biomed-flex-50a-resin-1l-form-4","description":"\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003eBioMed Flex 50A Resin is a soft, elastic, and transparent material for biocompatible applications requiring comfort and long-term skin (\u0026gt;30 days) or short-term mucosal membrane contact (\u0026lt;24 hours).\u003c\/p\u003e\n\u003cp\u003eBioMed Flex 50A Resin is manufactured in our FDA-registered, ISO 13485-certified facility.\u003c\/p\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003ch4\u003eWhy Choose BioMed Flex 50A Resin?\u003c\/h4\u003e\n\u003cp\u003e\u003cbr\u003eFuel medical innovation using 3D printing and BioMed Flex 50A Resin, from comfortable, patient-specific medical devices to soft tissue medical models surgeons can reference in the operating room (O.R.)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComfortable\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eProduce mass-personalized, medical-grade parts that are comfortable and feel great.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSoft\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eProduce soft tissue models that feel similar to human tissue and deliver biomechanical behaviors that are ideal for creating full-size hearts, gastrointestinal models, or small complex neurovascular models to bring into the O.R.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTransparent\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eParts produced using this material appear transparent and clear to view how tools or objects flow within parts.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMedical-Grade Material, Biocompatible Parts\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eLeverage a material manufactured within our Quality Management Systems, with strict adherence to ISO 13485. Instill confidence that this material is suitable for biocompatible applications with long-term skin (\u0026gt;30 days), short-term mucosal membrane contact (\u0026lt;24 hours), and USP Class VI certifications.\u003c\/p\u003e","published_at":"2026-07-12T17:17:14-04:00","created_at":"2026-07-12T17:17:13-04:00","vendor":"Formlabs","type":"Formlabs Resins","tags":["Form 4B","Form 4BL"],"price":49999,"price_min":49999,"price_max":49999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47934029267180,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"FLB-RSN-BFX-50A-0F4","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"BioMed Flex 50A Resin 1L (Form 4)","public_title":null,"options":["Default Title"],"price":49999,"weight":1500,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"811294034967","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/BioMed_Flex_50A_Resin_1L_Form_4_Product_Picture.webp?v=1783890617"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/BioMed_Flex_50A_Resin_1L_Form_4_Product_Picture.webp?v=1783890617","options":["Title"],"media":[{"alt":"BioMed Flex 50A Resin 1L Form 4","id":37471015272684,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/BioMed_Flex_50A_Resin_1L_Form_4_Product_Picture.webp?v=1783890617"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/BioMed_Flex_50A_Resin_1L_Form_4_Product_Picture.webp?v=1783890617","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003eBioMed Flex 50A Resin is a soft, elastic, and transparent material for biocompatible applications requiring comfort and long-term skin (\u0026gt;30 days) or short-term mucosal membrane contact (\u0026lt;24 hours).\u003c\/p\u003e\n\u003cp\u003eBioMed Flex 50A Resin is manufactured in our FDA-registered, ISO 13485-certified facility.\u003c\/p\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003ch4\u003eWhy Choose BioMed Flex 50A Resin?\u003c\/h4\u003e\n\u003cp\u003e\u003cbr\u003eFuel medical innovation using 3D printing and BioMed Flex 50A Resin, from comfortable, patient-specific medical devices to soft tissue medical models surgeons can reference in the operating room (O.R.)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComfortable\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eProduce mass-personalized, medical-grade parts that are comfortable and feel great.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSoft\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eProduce soft tissue models that feel similar to human tissue and deliver biomechanical behaviors that are ideal for creating full-size hearts, gastrointestinal models, or small complex neurovascular models to bring into the O.R.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTransparent\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eParts produced using this material appear transparent and clear to view how tools or objects flow within parts.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMedical-Grade Material, Biocompatible Parts\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eLeverage a material manufactured within our Quality Management Systems, with strict adherence to ISO 13485. Instill confidence that this material is suitable for biocompatible applications with long-term skin (\u0026gt;30 days), short-term mucosal membrane contact (\u0026lt;24 hours), and USP Class VI certifications.\u003c\/p\u003e"}

BioMed Flex 50A Resin 1L (Form 4)

$499.99

Summary BioMed Flex 50A Resin is a soft, elastic, and transparent material for biocompatible applications requiring comfort and long-term skin (>30 days) or short-term mucosal membrane contact (<24 hours). BioMed Flex 50A Resin is manufactured in our FDA-registered, ISO 13485-certified facility. Description Why Choose BioMed Flex 50A Resin...

Original PrusaSlicer Mug

IN STOCK: 30

$31.99

{"id":9302020882668,"title":"Original PrusaSlicer Mug","handle":"original-prusaslicer-mug","description":"\u003cp\u003eMatte black Original PrusaSlicer Mug, printed with PrusaSlicer keyboard shortcuts that make it easier for you to slice 3D models.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003eEnamel mug with handle\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003eDiameter 8 cm (3,15 inches)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003eHeight 8 cm (3,15 inches)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003eVolume 400 ml (13.5 oz)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003eWeight 158 g\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003eColor: Matte black with glossy text\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003eDo not wash in dishwasher*\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2026-06-29T17:25:53-04:00","created_at":"2026-06-29T17:25:52-04:00","vendor":"Prusa Research","type":"Prusa Research Merch","tags":[],"price":3199,"price_min":3199,"price_max":3199,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47865215451372,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-PSR-MUG-000-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Original PrusaSlicer Mug","public_title":null,"options":["Default Title"],"price":3199,"weight":500,"compare_at_price":null,"inventory_quantity":30,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/Original_PrusaSlicer_Mug_Product_Picture.webp?v=1782768215"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Original_PrusaSlicer_Mug_Product_Picture.webp?v=1782768215","options":["Title"],"media":[{"alt":"Original PrusaSlicer Mug","id":37416258928876,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Original_PrusaSlicer_Mug_Product_Picture.webp?v=1782768215"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Original_PrusaSlicer_Mug_Product_Picture.webp?v=1782768215","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eMatte black Original PrusaSlicer Mug, printed with PrusaSlicer keyboard shortcuts that make it easier for you to slice 3D models.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003eEnamel mug with handle\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003eDiameter 8 cm (3,15 inches)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003eHeight 8 cm (3,15 inches)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003eVolume 400 ml (13.5 oz)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003eWeight 158 g\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003eColor: Matte black with glossy text\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003eDo not wash in dishwasher*\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e"}

Original PrusaSlicer Mug

$31.99

Matte black Original PrusaSlicer Mug, printed with PrusaSlicer keyboard shortcuts that make it easier for you to slice 3D models. Enamel mug with handle Diameter 8 cm (3,15 inches) Height 8 cm (3,15 inches) Volume 400 ml (13.5 oz) Weight 158 g Color: Matte black with glossy text Do not wash in dishwasher*

Original Prusa Heatbed Mousepad

IN STOCK: 30

$23.99

{"id":9302016655596,"title":"Original Prusa Heatbed Mousepad","handle":"original-prusa-heatbed-mousepad","description":"\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003eIf you miss your 3D printer every time you lose sight of your heatbed, you can now place it right on your workbench and enjoy looking at it every day with the Original Prusa MousePad.\u003c\/p\u003e","published_at":"2026-06-29T17:07:01-04:00","created_at":"2026-06-29T17:07:00-04:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":[],"price":2399,"price_min":2399,"price_max":2399,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47865195921644,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-HBD-MPD-000-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Original Prusa Heatbed Mousepad","public_title":null,"options":["Default Title"],"price":2399,"weight":100,"compare_at_price":null,"inventory_quantity":30,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/Original_Prusa_Heatbed_Mousepad_Product_Picture.webp?v=1782767016","\/\/www.voxelfactory.com\/cdn\/shop\/files\/Original_Prusa_Heatbed_Mousepad_Featured_Product_Picture.webp?v=1782767017"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Original_Prusa_Heatbed_Mousepad_Product_Picture.webp?v=1782767016","options":["Title"],"media":[{"alt":"Original Prusa Heatbed Mousepad","id":37416237039852,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Original_Prusa_Heatbed_Mousepad_Product_Picture.webp?v=1782767016"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Original_Prusa_Heatbed_Mousepad_Product_Picture.webp?v=1782767016","width":1400},{"alt":"Original Prusa Heatbed Mousepad Featured","id":37416237007084,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Original_Prusa_Heatbed_Mousepad_Featured_Product_Picture.webp?v=1782767017"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Original_Prusa_Heatbed_Mousepad_Featured_Product_Picture.webp?v=1782767017","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003eIf you miss your 3D printer every time you lose sight of your heatbed, you can now place it right on your workbench and enjoy looking at it every day with the Original Prusa MousePad.\u003c\/p\u003e"}

Original Prusa Heatbed Mousepad

$23.99

Summary If you miss your 3D printer every time you lose sight of your heatbed, you can now place it right on your workbench and enjoy looking at it every day with the Original Prusa MousePad.

Original Prusa MK4/S Enclosure

IN STOCK: 9

$559.00

{"id":9301995716844,"title":"Original Prusa MK4\/S Enclosure","handle":"original-prusa-mk4-s-enclosure","description":"\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003eIntroducing Original Prusa Enclosure: Modular box for your 3D printer.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eEnclosures mainly help with stabilizing the inner environment and raising ambient temperatures, which is vital for printing materials such as ASA, PC-CF, PP, and others that have a tendency to warp. Prusa Research also prepared a handful of add-ons that cater to any of your specific needs.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe Original Prusa Enclosure is shipped disassembled as a kit.\u003c\/p\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003ch2\u003eMain Features\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eHigh-quality Components\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe frame along with the top and bottom panels are made from metal, the side panels are made from PETG plastic. The solid robust design allows several enclosures to be stacked on top of each other and secured using screws.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/frame.avif?v=1782764224\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003ePrint Advanced Materials\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe enclosure creates a stable printing environment with increased temperatures, shields the printer from drafts and blasts of cold air and reduces the build-up of dust on moving parts. This is perfect for printing demanding high-temperature materials which are otherwise prone to warping - such as PC CF, Nylon, PP and more.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/advanced-material.avif?v=1782764271\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eSafety Features\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eInstall an optional lock to prevent unauthorized access to your 3D printer - ideal solution for schools, hackerspaces and other public places. An optional filtration system (HEPA filter, 99.9% efficiency) prevents the spread of ultra-fine particles (UFPS).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/Key_Lock_System.avif?v=1782764358\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eUpgradable and Expandable\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe enclosure can be further upgraded and expanded with official add-ons (both paid and free) and it is also ready for your DIY projects. You can design your own brackets, holders and other accessories to tailor the enclosure exactly for your needs. A dedicated section will be available at Printables.com after release.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/mounting_points.avif?v=1782764392\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca class=\"voxel-product-description-link\" href=\"https:\/\/blog.prusa3d.com\/original-prusa-enclosure_67656\/\" rel=\"noopener\" target=\"_blank\"\u003eLearn more in the announcement article\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions with the LCD mounted outside:\u003c\/strong\u003e 530 mm (w) × 545 mm (h) × 715 mm (d)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions with the LCD inside:\u003c\/strong\u003e 530 mm (w) × 545 mm (h) × 640 mm (d) At least 250 mm is required in front of the enclosure for the doors to fully open\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003e\u003cstrong\u003eEnclosure type:\u003c\/strong\u003e Passive, heating provided only by the 3D printer’s heatbed\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003e\u003cstrong\u003eWeight: \u003c\/strong\u003e10,6 kg (23.4 lbs)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003e\u003cstrong\u003eMax stackable units:\u003c\/strong\u003e up to 5 (with more than 3 enclosures, anchoring to a wall is recommended)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003e\u003cstrong\u003eThe basic package contains:\u003c\/strong\u003e All components required to build the enclosure (frame parts, transparent side panels, top and bottom panels, mounting material, printer frame brace), temperature sensor, and documentation. Handles and optional 3D-printed accessories seen in some photos are not included in the package.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/size.avif?v=1782764979\" alt=\"\"\u003e\u003c\/p\u003e","published_at":"2026-06-29T16:09:18-04:00","created_at":"2026-06-29T16:09:17-04:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":["enclosure","FreeShippingExcluded","MK4","MK4S"],"price":55900,"price_min":55900,"price_max":55900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47865081495788,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-MKX-ENC-000-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Original Prusa MK4\/S Enclosure","public_title":null,"options":["Default Title"],"price":55900,"weight":10600,"compare_at_price":null,"inventory_quantity":9,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/Original_Prusa_MK4_S_Enclosure_Product_Picture.webp?v=1782763311","\/\/www.voxelfactory.com\/cdn\/shop\/files\/Original_Prusa_MK4_S_Enclosure_Side_View_Product_Picture.webp?v=1782827629"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Original_Prusa_MK4_S_Enclosure_Product_Picture.webp?v=1782763311","options":["Title"],"media":[{"alt":"Original Prusa MK4\/S Enclosure","id":37416093188332,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Original_Prusa_MK4_S_Enclosure_Product_Picture.webp?v=1782763311"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Original_Prusa_MK4_S_Enclosure_Product_Picture.webp?v=1782763311","width":1400},{"alt":"Original Prusa MK4\/S Enclosure Side View","id":37418081943788,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Original_Prusa_MK4_S_Enclosure_Side_View_Product_Picture.webp?v=1782827629"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Original_Prusa_MK4_S_Enclosure_Side_View_Product_Picture.webp?v=1782827629","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003eIntroducing Original Prusa Enclosure: Modular box for your 3D printer.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eEnclosures mainly help with stabilizing the inner environment and raising ambient temperatures, which is vital for printing materials such as ASA, PC-CF, PP, and others that have a tendency to warp. Prusa Research also prepared a handful of add-ons that cater to any of your specific needs.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe Original Prusa Enclosure is shipped disassembled as a kit.\u003c\/p\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003ch2\u003eMain Features\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eHigh-quality Components\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe frame along with the top and bottom panels are made from metal, the side panels are made from PETG plastic. The solid robust design allows several enclosures to be stacked on top of each other and secured using screws.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/frame.avif?v=1782764224\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003ePrint Advanced Materials\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe enclosure creates a stable printing environment with increased temperatures, shields the printer from drafts and blasts of cold air and reduces the build-up of dust on moving parts. This is perfect for printing demanding high-temperature materials which are otherwise prone to warping - such as PC CF, Nylon, PP and more.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/advanced-material.avif?v=1782764271\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eSafety Features\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eInstall an optional lock to prevent unauthorized access to your 3D printer - ideal solution for schools, hackerspaces and other public places. An optional filtration system (HEPA filter, 99.9% efficiency) prevents the spread of ultra-fine particles (UFPS).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/Key_Lock_System.avif?v=1782764358\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eUpgradable and Expandable\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe enclosure can be further upgraded and expanded with official add-ons (both paid and free) and it is also ready for your DIY projects. You can design your own brackets, holders and other accessories to tailor the enclosure exactly for your needs. A dedicated section will be available at Printables.com after release.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/mounting_points.avif?v=1782764392\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca class=\"voxel-product-description-link\" href=\"https:\/\/blog.prusa3d.com\/original-prusa-enclosure_67656\/\" rel=\"noopener\" target=\"_blank\"\u003eLearn more in the announcement article\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions with the LCD mounted outside:\u003c\/strong\u003e 530 mm (w) × 545 mm (h) × 715 mm (d)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions with the LCD inside:\u003c\/strong\u003e 530 mm (w) × 545 mm (h) × 640 mm (d) At least 250 mm is required in front of the enclosure for the doors to fully open\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003e\u003cstrong\u003eEnclosure type:\u003c\/strong\u003e Passive, heating provided only by the 3D printer’s heatbed\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003e\u003cstrong\u003eWeight: \u003c\/strong\u003e10,6 kg (23.4 lbs)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003e\u003cstrong\u003eMax stackable units:\u003c\/strong\u003e up to 5 (with more than 3 enclosures, anchoring to a wall is recommended)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e\n\u003cp\u003e\u003cstrong\u003eThe basic package contains:\u003c\/strong\u003e All components required to build the enclosure (frame parts, transparent side panels, top and bottom panels, mounting material, printer frame brace), temperature sensor, and documentation. Handles and optional 3D-printed accessories seen in some photos are not included in the package.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/size.avif?v=1782764979\" alt=\"\"\u003e\u003c\/p\u003e"}

Original Prusa MK4/S Enclosure

$559.00

Summary Introducing Original Prusa Enclosure: Modular box for your 3D printer. Enclosures mainly help with stabilizing the inner environment and raising ambient temperatures, which is vital for printing materials such as ASA, PC-CF, PP, and others that have a tendency to warp. Prusa Research also prepared a handful of add-ons that cater to any...

Prusament ASA 1.75mm 800g (NFC)

Product Description

Related Products

Polymaker PLA Pro 1.75mm 1kg

Polymaker PLA Pro 1.75mm 1kg

Prusa XL to Prusa XL+ Upgrade

Prusa XL to Prusa XL+ Upgrade

Prusa CORE One+ to Prusa CORE One+ (Gen 2) upgrade

Prusa CORE One+ to Prusa CORE One+ (Gen 2) upgrade

Prusa CORE One L to CORE One L+ upgrade

Prusa CORE One L to CORE One L+ upgrade

Bambu Lab PETG Basic 1.75mm 1kg

Bambu Lab PETG Basic 1.75mm 1kg

INDX Conversion Kit [CORE One L/+]

INDX Conversion Kit [CORE One L/+]

INDX Conversion Kit [CORE One/+ & Gen2]

INDX Conversion Kit [CORE One/+ & Gen2]

Denture Base Resin V2 1L (Form 4)

Denture Base Resin V2 1L (Form 4)

BioMed Flex 50A Resin 1L (Form 4)

BioMed Flex 50A Resin 1L (Form 4)

Original PrusaSlicer Mug

Original PrusaSlicer Mug

Original Prusa Heatbed Mousepad

Original Prusa Heatbed Mousepad

Original Prusa MK4/S Enclosure

Original Prusa MK4/S Enclosure

Site Map

Keep in Touch

Why To Choose Prusament

Excellent for outdoor use

Perfectly smooth finish made with acetone vapors

Fine details without stringing

Basic Attributes

Pros	Great for outside use – UV stable
	Good high-temperature resistance
	Detailed prints without a stringing effect
	Can be smoothed with acetone vapors
	Can be easily sanded / post-processed
	Good mechanical resistance
Cons	Large models tend to warp. We recommend printing in an enclosure or printing large components with a less warping material, such as PETG.
	Produces a slight odor of burned plastic during printing (less than ABS)
	Contains styrene (potentially harmful fumes). We recommend printing in a well-ventilated area or using an enclosure with active filtration.
	Slightly hygroscopic (absorbs moisture)

Parameter	Specification
Nozzle Temperature	260 ±5 °C
Heatbed Temperature	110 ±5 °C
Recommended Steel Sheet	Satin
Recommended Nozzle	0.4 mm brass nozzle
Supported Prusa Print Profiles	All Prusa FDM 3D printers
Filament Diameter	1.75 mm
Filament Diameter Tolerance	±0.04 mm