Prusa i3 X-axis stepper motor

{"id":8896103612652,"title":"Polymaker Fiberon PA612-CF15 1.75mm 500g","handle":"polymaker-fiberon-pa612-cf15-1-75mm-500g","description":"\u003cp\u003e\u003cspan\u003eFiberon™ PA612-CF15 is a carbon fiber reinforced long chain copolyimide filament. Thanks to its chemical structure, this product has lower moisture sensitivity compared to PA6\/66 and PA6-based materials, and better mechanical properties than PA12-based materials. In addition, the carbon fiber reinforcement and Warpfree™ technology enhance the size stability of the prints produced with this material.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eFiberon™ PA612-CF15 is the same great formula as PolyMide PA612-CF, although Fiberon™ PA612-CF15 may print in a slightly darker black shade color than its predecessor.\u003c\/p\u003e\n\u003ch5\u003ePrinting Requirements\u003c\/h5\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cul\u003e\n\u003cli\u003eAll-metal hotend 250˚C+ recommended\u003c\/li\u003e\n\u003cli\u003eHardened nozzle\u003c\/li\u003e\n\u003cli\u003eFilament dryer\u003c\/li\u003e\n\u003cli\u003eAnnealing post printing\u003c\/li\u003e\n\u003cli\u003eMoisture conditioning after Annealing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003ePrint settings\u003c\/h5\u003e\n\u003cp\u003ePrinting Temperature: 250˚C - 300˚C\u003cbr\u003eBuild Plate Temperature: 40˚C - 50˚C\u003cbr\u003eChamber Temperature: Room Temperature\u003cbr\u003ePrinting Speed: up to 300mm\/s\u003cbr\u003eCooling Fan: OFF\u003cbr\u003e\u003cbr\u003eDirect Drive:\u003cbr\u003eRetraction Distance: 3mm\u003cbr\u003eRetraction Speed: 40mm\/s\u003cbr\u003eIndirect Drive:\u003cbr\u003eRetraction Distance: 6mm\u003cbr\u003eRetraction Speed: 60mm\/s\u003cbr\u003e\u003cbr\u003eRecommended Drying Settings:\u003cbr\u003eRegular Oven: 100˚C for 10h\u003cbr\u003ePolyDryer: Level 3 for 18h (\u003ca href=\"\/fr\/collections\/fdm-3d-printer-add-ons\/products\/polymaker-polydryer\" target=\"_blank\"\u003ePolyDryer™\u003c\/a\u003e)\u003cbr\u003e(Only if the material has absorbed moisture)\u003cbr\u003e\u003cbr\u003eAnnealing Settings: 100˚C for 16h\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrinter Profiles:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Bambu-Lab_X1C_Bambu-Studio_0.4_Fiberon-PA612-CF.zip\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Qidi_Q1Pro_OrcaSlicer_0.4_Fiberon-PA612-CF15.zip\" target=\"_blank\"\u003eQIDI Tech\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Raise3D_E2CF_IdeaMaker_0.4_Fiberon-PA612-CF15.zip\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCan't find your profile? Join our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/discord.polymaker.com\/\" target=\"_blank\"\u003eDiscord\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003eand see if the community has made one already!\u003c\/p\u003e\n\u003ch5\u003eFAQ\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is annealing?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou can find out more about annealing\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/us.polymaker.com\/blogs\/3d-printing-tips\/what-is-annealing-and-why-do-we-do-it\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is moisture conditioning?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMoisture conditioning refers to allowing the print to absorb moisture. This is inevitble since nylons are hygroscopic, but you can expedite the process by keeping the print in a high humidity climate, or submerging them in water, for 48 hours. All of our test specimens were annealed at 100˚C for 16 hours, and then immerged in water at 60˚C for 48 hours. The average moisture content of specimens is 2.57%.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I anneal before or after moisture conditioning?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen you anneal in a convection oven, you will dry the part out. So if you moisture condition before annealing - you will need to moisture condition again after. So we would suggest to moisture condition after annealing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy do you use such a low build plate temperature with your nylons?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur nylons come with our Warp-Free™ Technology. In order for this Warp-Free™ technology to work as it should - we want to make sure the build plate and the ambient air temperatures are both below 50˚C. We then anneal the print after to get it's full strength.\u003c\/p\u003e\n\u003cp\u003eLearn more\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/us.polymaker.com\/blogs\/finding-the-right-filament\/polymakers-technologies\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill the spools work in an AMS?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes! We have redesigned the edges of our spools so all Polymaker products will now spin great in the AMS.\u003c\/p\u003e\n\u003cp\u003eThat said - you will need to be careful when using any abrasive materials in the AMS.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan you offer 1KG Fiberon™ Spool Options?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUnfortunately we are not offering 1KG Fiberon™ options and this has to do with the increased chance of carbon fiber and glass fiber filament snapping on the spool. Since carbon fiber and glass fiber filament is more brittle, we spool these with a larger core. This larger core means that 1KG of filament will not fit on a 1KG spool.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2025-05-07T15:51:14-04:00","created_at":"2025-05-07T14:50:28-04:00","vendor":"Polymaker","type":"Polymaker 1.75mm filaments","tags":["1.75mm","carbon fiber","Fiberon","Filaments","nylon","PA612"],"price":4899,"price_min":4899,"price_max":4899,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":46422938517740,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PMK-FBR-PA612-CF15-500","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Polymaker Fiberon PA612-CF15 1.75mm 500g","public_title":null,"options":["Default Title"],"price":4899,"weight":850,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/Polymaker_Fiberon_PA612-CF15_1.75mm500g_Product_Picture.webp?v=1746647162"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Polymaker_Fiberon_PA612-CF15_1.75mm500g_Product_Picture.webp?v=1746647162","options":["Title"],"media":[{"alt":"Polymaker Fiberon PA612-CF15 1.75mm500g Product Picture","id":35332451303660,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Polymaker_Fiberon_PA612-CF15_1.75mm500g_Product_Picture.webp?v=1746647162"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Polymaker_Fiberon_PA612-CF15_1.75mm500g_Product_Picture.webp?v=1746647162","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003eFiberon™ PA612-CF15 is a carbon fiber reinforced long chain copolyimide filament. Thanks to its chemical structure, this product has lower moisture sensitivity compared to PA6\/66 and PA6-based materials, and better mechanical properties than PA12-based materials. In addition, the carbon fiber reinforcement and Warpfree™ technology enhance the size stability of the prints produced with this material.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eFiberon™ PA612-CF15 is the same great formula as PolyMide PA612-CF, although Fiberon™ PA612-CF15 may print in a slightly darker black shade color than its predecessor.\u003c\/p\u003e\n\u003ch5\u003ePrinting Requirements\u003c\/h5\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cul\u003e\n\u003cli\u003eAll-metal hotend 250˚C+ recommended\u003c\/li\u003e\n\u003cli\u003eHardened nozzle\u003c\/li\u003e\n\u003cli\u003eFilament dryer\u003c\/li\u003e\n\u003cli\u003eAnnealing post printing\u003c\/li\u003e\n\u003cli\u003eMoisture conditioning after Annealing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003ePrint settings\u003c\/h5\u003e\n\u003cp\u003ePrinting Temperature: 250˚C - 300˚C\u003cbr\u003eBuild Plate Temperature: 40˚C - 50˚C\u003cbr\u003eChamber Temperature: Room Temperature\u003cbr\u003ePrinting Speed: up to 300mm\/s\u003cbr\u003eCooling Fan: OFF\u003cbr\u003e\u003cbr\u003eDirect Drive:\u003cbr\u003eRetraction Distance: 3mm\u003cbr\u003eRetraction Speed: 40mm\/s\u003cbr\u003eIndirect Drive:\u003cbr\u003eRetraction Distance: 6mm\u003cbr\u003eRetraction Speed: 60mm\/s\u003cbr\u003e\u003cbr\u003eRecommended Drying Settings:\u003cbr\u003eRegular Oven: 100˚C for 10h\u003cbr\u003ePolyDryer: Level 3 for 18h (\u003ca href=\"\/fr\/collections\/fdm-3d-printer-add-ons\/products\/polymaker-polydryer\" target=\"_blank\"\u003ePolyDryer™\u003c\/a\u003e)\u003cbr\u003e(Only if the material has absorbed moisture)\u003cbr\u003e\u003cbr\u003eAnnealing Settings: 100˚C for 16h\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrinter Profiles:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Bambu-Lab_X1C_Bambu-Studio_0.4_Fiberon-PA612-CF.zip\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Qidi_Q1Pro_OrcaSlicer_0.4_Fiberon-PA612-CF15.zip\" target=\"_blank\"\u003eQIDI Tech\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Raise3D_E2CF_IdeaMaker_0.4_Fiberon-PA612-CF15.zip\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCan't find your profile? Join our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/discord.polymaker.com\/\" target=\"_blank\"\u003eDiscord\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003eand see if the community has made one already!\u003c\/p\u003e\n\u003ch5\u003eFAQ\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is annealing?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou can find out more about annealing\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/us.polymaker.com\/blogs\/3d-printing-tips\/what-is-annealing-and-why-do-we-do-it\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is moisture conditioning?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMoisture conditioning refers to allowing the print to absorb moisture. This is inevitble since nylons are hygroscopic, but you can expedite the process by keeping the print in a high humidity climate, or submerging them in water, for 48 hours. All of our test specimens were annealed at 100˚C for 16 hours, and then immerged in water at 60˚C for 48 hours. The average moisture content of specimens is 2.57%.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I anneal before or after moisture conditioning?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen you anneal in a convection oven, you will dry the part out. So if you moisture condition before annealing - you will need to moisture condition again after. So we would suggest to moisture condition after annealing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy do you use such a low build plate temperature with your nylons?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur nylons come with our Warp-Free™ Technology. In order for this Warp-Free™ technology to work as it should - we want to make sure the build plate and the ambient air temperatures are both below 50˚C. We then anneal the print after to get it's full strength.\u003c\/p\u003e\n\u003cp\u003eLearn more\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/us.polymaker.com\/blogs\/finding-the-right-filament\/polymakers-technologies\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill the spools work in an AMS?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes! We have redesigned the edges of our spools so all Polymaker products will now spin great in the AMS.\u003c\/p\u003e\n\u003cp\u003eThat said - you will need to be careful when using any abrasive materials in the AMS.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan you offer 1KG Fiberon™ Spool Options?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUnfortunately we are not offering 1KG Fiberon™ options and this has to do with the increased chance of carbon fiber and glass fiber filament snapping on the spool. Since carbon fiber and glass fiber filament is more brittle, we spool these with a larger core. This larger core means that 1KG of filament will not fit on a 1KG spool.\u003c\/p\u003e\n\u003c\/div\u003e"}

{"id":8896072351980,"title":"Polymaker Fiberon PET-CF17 1.75mm 500g","handle":"polymaker-fiberon-pet-cf17-1-75mm-500g","description":"\u003cp\u003e\u003cspan\u003eFiberon™ PET-CF17 is a carbon fiber reinforced PET (polyethylene terephthalate) filament. It's the preferred choice for engineering 3D printing composite materials, featuring high modulus, heat resistance, moisture insensitivity, and ease of printing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"product-details__block product-details__text rte\"\u003e\n\u003ch5\u003ePrinting Requirements\u003c\/h5\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cul\u003e\n\u003cli\u003eAll-metal hotend 270˚C+\u003c\/li\u003e\n\u003cli\u003eHardened nozzle\u003c\/li\u003e\n\u003cli\u003eAnnealing post printing\u003c\/li\u003e\n\u003cli\u003eYou may need a filament dryer depending on the humidity of your environment. Keep dry when not in use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003ePrint settings\u003c\/h5\u003e\n\u003cp\u003ePrinting Temperature: 270˚C - 300˚C\u003cbr\u003eBuild Plate Temperature: 70˚C - 80˚C\u003cbr\u003eChamber Temperature: Room Temperature\u003cbr\u003ePrinting Speed: up to 300mm\/s\u003cbr\u003eCooling Fan: OFF\u003cbr\u003e\u003cbr\u003eDirect Drive:\u003cbr\u003eRetraction Distance: 3mm\u003cbr\u003eRetraction Speed: 40mm\/s\u003cbr\u003eIndirect Drive:\u003cbr\u003eRetraction Distance: 6mm\u003cbr\u003eRetraction Speed: 60mm\/s\u003cbr\u003e\u003cbr\u003eRecommended Drying Settings:\u003cbr\u003eRegular Oven: 100˚C for 10h\u003cbr\u003ePolyDryer: Level 3 for 18h (\u003ca href=\"\/fr\/collections\/fdm-3d-printer-add-ons\/products\/polymaker-polydryer\" target=\"_blank\"\u003ePolyDryer™\u003c\/a\u003e)\u003cbr\u003e(Only if the material has absorbed moisture)\u003cbr\u003e\u003cbr\u003eAnnealing Settings: 120˚C for 10h\u003c\/p\u003e\n\u003cp\u003eAnnealing Settings For Parts With Large Overhangs or Thin Sections: 100˚C for 14h\u003c\/p\u003e\n\u003cp\u003eMore info and tips on annealing in FAQ tab.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrinter Profiles:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Bambu-Lab_X1C_Bambu-Studio_0.4_Fiberon-PET-CF.zip\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Qidi_Q1Pro_OrcaSlicer_0.4_Fiberon-PET-CF17.zip\" target=\"_blank\"\u003eQIDI Tech\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Raise3D_E2CF_IdeaMaker_0.4_Fiberon-PET-CF17.zip\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCan't find your profile? Join our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/discord.polymaker.com\/\" target=\"_blank\"\u003eDiscord\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003eand see if the community has made one already!\u003c\/p\u003e\n\u003ch5\u003eFAQ\u003c\/h5\u003e\n\u003cdiv class=\"product-details__block\"\u003e\n\u003cdiv id=\"panel-2\" role=\"tabpanel\" aria-labelledby=\"tab-2\" tabindex=\"0\"\u003e\n\u003cdiv class=\"rte\"\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is annealing?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou can find out more about annealing\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/us.polymaker.com\/blogs\/3d-printing-tips\/what-is-annealing-and-why-do-we-do-it\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAnnealing at 120°C is deforming my part, what should I do?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf your part has very thin sections - 120°C annealing can cause issue with deformation. In this instance we would give these three potential solutions\u003c\/p\u003e\n\u003cp\u003e1. Gradual heating method. Divide the annealing process into two stages, first keep the temperature at 80-100°C for a period of time, and then slowly heat it to 120°C to avoid rapid heating and internal stress concentration.\u003c\/p\u003e\n\u003cp\u003e2. Anneal at a lower 100°C for a longer period of time. If annealing is performed at 80-100 degrees, the crystallization rate of PET-CF is very slow and the ideal mechanical properties cannot be achieved. 100°C would be the bare minimum to anneal PET-CF at. Our suggestion would be to try 14 hours though we do not have a strict standard for this at this time.\u003c\/p\u003e\n\u003cp\u003e3. Keep support material on thin sections with large overhangs. You can also use other things such as salt or sand to tightly compact around your print to help prevent deformation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill the spools work in an AMS?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes! We have redesigned the edges of our spools so all Polymaker products will now spin great in the AMS.\u003c\/p\u003e\n\u003cp\u003eThat said - you will need to be careful when using any abrasive materials in the AMS.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between PET and PETG?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePET and PETG differ in their chemical structure, properties, printability, and applications. PETG is more flexible, easier to print, and suitable for 3D printing and medical applications, while PET is more durable and suitable for applications requiring thermal resistance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a filament dryer?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is possible to print this without a filament dryer, but that can depend on the environment where you live. If you live in a humid climate - you may need a filament dryer either entire time while printing, or at least between prints. Keep stored dry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan you offer 1KG Fiberon™ Spool Options?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUnfortunately we are not offering 1KG Fiberon™ options and this has to do with the increased chance of carbon fiber and glass fiber filament snapping on the spool.\u003c\/p\u003e\n\u003cp\u003eSince carbon fiber and glass fiber filament is more brittle, we spool these with a larger core. This larger core means that 1KG of filament will not fit on a 1KG spool.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2025-05-07T14:45:01-04:00","created_at":"2025-05-07T14:07:47-04:00","vendor":"Polymaker","type":"Polymaker 1.75mm filaments","tags":["1.75mm","carbon fiber","Fiberon","Filaments","PET-CF"],"price":3499,"price_min":3499,"price_max":3499,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":46422881108204,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PMK-FBR-PET-CF17-500","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Polymaker Fiberon PET-CF17 1.75mm 500g","public_title":null,"options":["Default Title"],"price":3499,"weight":850,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/Polymaker_Fiberon_PET-CF17_1.75mm_500g_Product_Picture.webp?v=1746643621"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Polymaker_Fiberon_PET-CF17_1.75mm_500g_Product_Picture.webp?v=1746643621","options":["Title"],"media":[{"alt":"Polymaker Fiberon PET-CF17 1.75mm 500g Product Picture","id":35332116709612,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Polymaker_Fiberon_PET-CF17_1.75mm_500g_Product_Picture.webp?v=1746643621"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Polymaker_Fiberon_PET-CF17_1.75mm_500g_Product_Picture.webp?v=1746643621","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003eFiberon™ PET-CF17 is a carbon fiber reinforced PET (polyethylene terephthalate) filament. It's the preferred choice for engineering 3D printing composite materials, featuring high modulus, heat resistance, moisture insensitivity, and ease of printing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"product-details__block product-details__text rte\"\u003e\n\u003ch5\u003ePrinting Requirements\u003c\/h5\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cul\u003e\n\u003cli\u003eAll-metal hotend 270˚C+\u003c\/li\u003e\n\u003cli\u003eHardened nozzle\u003c\/li\u003e\n\u003cli\u003eAnnealing post printing\u003c\/li\u003e\n\u003cli\u003eYou may need a filament dryer depending on the humidity of your environment. Keep dry when not in use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003ePrint settings\u003c\/h5\u003e\n\u003cp\u003ePrinting Temperature: 270˚C - 300˚C\u003cbr\u003eBuild Plate Temperature: 70˚C - 80˚C\u003cbr\u003eChamber Temperature: Room Temperature\u003cbr\u003ePrinting Speed: up to 300mm\/s\u003cbr\u003eCooling Fan: OFF\u003cbr\u003e\u003cbr\u003eDirect Drive:\u003cbr\u003eRetraction Distance: 3mm\u003cbr\u003eRetraction Speed: 40mm\/s\u003cbr\u003eIndirect Drive:\u003cbr\u003eRetraction Distance: 6mm\u003cbr\u003eRetraction Speed: 60mm\/s\u003cbr\u003e\u003cbr\u003eRecommended Drying Settings:\u003cbr\u003eRegular Oven: 100˚C for 10h\u003cbr\u003ePolyDryer: Level 3 for 18h (\u003ca href=\"\/fr\/collections\/fdm-3d-printer-add-ons\/products\/polymaker-polydryer\" target=\"_blank\"\u003ePolyDryer™\u003c\/a\u003e)\u003cbr\u003e(Only if the material has absorbed moisture)\u003cbr\u003e\u003cbr\u003eAnnealing Settings: 120˚C for 10h\u003c\/p\u003e\n\u003cp\u003eAnnealing Settings For Parts With Large Overhangs or Thin Sections: 100˚C for 14h\u003c\/p\u003e\n\u003cp\u003eMore info and tips on annealing in FAQ tab.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrinter Profiles:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Bambu-Lab_X1C_Bambu-Studio_0.4_Fiberon-PET-CF.zip\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Qidi_Q1Pro_OrcaSlicer_0.4_Fiberon-PET-CF17.zip\" target=\"_blank\"\u003eQIDI Tech\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Raise3D_E2CF_IdeaMaker_0.4_Fiberon-PET-CF17.zip\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCan't find your profile? Join our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/discord.polymaker.com\/\" target=\"_blank\"\u003eDiscord\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003eand see if the community has made one already!\u003c\/p\u003e\n\u003ch5\u003eFAQ\u003c\/h5\u003e\n\u003cdiv class=\"product-details__block\"\u003e\n\u003cdiv id=\"panel-2\" role=\"tabpanel\" aria-labelledby=\"tab-2\" tabindex=\"0\"\u003e\n\u003cdiv class=\"rte\"\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is annealing?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou can find out more about annealing\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/us.polymaker.com\/blogs\/3d-printing-tips\/what-is-annealing-and-why-do-we-do-it\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAnnealing at 120°C is deforming my part, what should I do?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf your part has very thin sections - 120°C annealing can cause issue with deformation. In this instance we would give these three potential solutions\u003c\/p\u003e\n\u003cp\u003e1. Gradual heating method. Divide the annealing process into two stages, first keep the temperature at 80-100°C for a period of time, and then slowly heat it to 120°C to avoid rapid heating and internal stress concentration.\u003c\/p\u003e\n\u003cp\u003e2. Anneal at a lower 100°C for a longer period of time. If annealing is performed at 80-100 degrees, the crystallization rate of PET-CF is very slow and the ideal mechanical properties cannot be achieved. 100°C would be the bare minimum to anneal PET-CF at. Our suggestion would be to try 14 hours though we do not have a strict standard for this at this time.\u003c\/p\u003e\n\u003cp\u003e3. Keep support material on thin sections with large overhangs. You can also use other things such as salt or sand to tightly compact around your print to help prevent deformation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill the spools work in an AMS?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes! We have redesigned the edges of our spools so all Polymaker products will now spin great in the AMS.\u003c\/p\u003e\n\u003cp\u003eThat said - you will need to be careful when using any abrasive materials in the AMS.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between PET and PETG?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePET and PETG differ in their chemical structure, properties, printability, and applications. PETG is more flexible, easier to print, and suitable for 3D printing and medical applications, while PET is more durable and suitable for applications requiring thermal resistance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a filament dryer?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is possible to print this without a filament dryer, but that can depend on the environment where you live. If you live in a humid climate - you may need a filament dryer either entire time while printing, or at least between prints. Keep stored dry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan you offer 1KG Fiberon™ Spool Options?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUnfortunately we are not offering 1KG Fiberon™ options and this has to do with the increased chance of carbon fiber and glass fiber filament snapping on the spool.\u003c\/p\u003e\n\u003cp\u003eSince carbon fiber and glass fiber filament is more brittle, we spool these with a larger core. This larger core means that 1KG of filament will not fit on a 1KG spool.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}

{"id":8896062488812,"title":"Polymaker Fiberon PETG-rCF08 1.75mm 500g","handle":"polymaker-fiberon-petg-rcf08-1-75mm-500g","description":"\u003cp\u003e\u003cspan\u003eFiberon™ PETG-rCF08 is a recy\u003c\/span\u003e\u003cspan\u003ecled carbon fiber \u003c\/span\u003e\u003cspan\u003ereinforced PET\u003c\/span\u003e\u003cspan\u003eG filament. It inherits the comp\u003c\/span\u003e\u003cspan\u003er\u003c\/span\u003e\u003cspan\u003eehensi\u003c\/span\u003e\u003cspan\u003eve per\u003c\/span\u003e\u003cspan\u003eformance of P\u003c\/span\u003e\u003cspan\u003eETG, f\u003c\/span\u003e\u003cspan\u003eeaturing \u003c\/span\u003e\u003cspan\u003erecy\u003c\/span\u003e\u003cspan\u003ecled carbon fiber for enhanced su\u003c\/span\u003e\u003cspan\u003er\u003c\/span\u003e\u003cspan\u003eface textu\u003c\/span\u003e\u003cspan\u003ere and \u003c\/span\u003e\u003cspan\u003eimp\u003c\/span\u003e\u003cspan\u003erov\u003c\/span\u003e\u003cspan\u003eed mechanical p\u003c\/span\u003e\u003cspan\u003eroper\u003c\/span\u003e\u003cspan\u003eties.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"product-details__block product-details__text rte\"\u003e\n\u003ch5\u003ePrinting Requirements\u003c\/h5\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cul\u003e\n\u003cli\u003eHardened nozzle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-details__block product-details__text rte\"\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Statement_On_Compliance_With_REACH_1.6_1_de0eeee1-3a63-4fd7-ab3c-236531d22a2e.pdf?v=1731430181\" target=\"_blank\"\u003eREACH\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Statement_On_Compliance_With_RoHS_1.4.pdf?v=1711471841\" target=\"_blank\"\u003eRoHS\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/889_Signed_and_Dated_1.pdf?v=1732549285\" target=\"_blank\"\u003e889\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Profile_Creation_Process_V0.6_1.pdf?v=1731430421\" target=\"_blank\"\u003ePCP\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Polymaker_ISO9001_2024.pdf?v=1731430331\" target=\"_blank\"\u003eISO9001 CERT\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003ePrint settings\u003c\/h5\u003e\n\u003cp\u003ePrinting Temperature: 240˚C - 270˚C\u003cbr\u003eBuild Plate Temperature: 60˚C - 70˚C\u003cbr\u003eChamber Temperature: Room Temperature\u003cbr\u003ePrinting Speed: up to 300mm\/s\u003cbr\u003eCooling Fan: 0%-50%\u003cbr\u003e\u003cbr\u003eDirect Drive:\u003cbr\u003eRetraction Distance: 3mm\u003cbr\u003eRetraction Speed: 40mm\/s\u003cbr\u003eIndirect Drive:\u003cbr\u003eRetraction Distance: 6mm\u003cbr\u003eRetraction Speed: 60mm\/s\u003cbr\u003e\u003cbr\u003eRecommended Drying Settings:\u003cbr\u003eRegular Oven: 65˚C for 3h\u003cbr\u003ePolyDryer: Level 2 for 6h (\u003ca href=\"\/fr\/collections\/fdm-3d-printer-add-ons\/products\/polymaker-polydryer\" target=\"_blank\"\u003ePolyDryer™\u003c\/a\u003e)\u003cbr\u003e(Only if the material has absorbed moisture)\u003cbr\u003e\u003cbr\u003eAnnealing Settings: N\/A\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrinter Profiles:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Bambu-Lab_X1C_Bambu-Studio_0.4_Fiberon-PETG-rCF.zip\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Qidi_Q1Pro_OrcaSlicer_0.4_Fiberon-PETG-rCF08.zip\" target=\"_blank\"\u003eQIDI Tech\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Raise3D_E2CF_IdeaMaker_0.4_Fiberon-PETG-rCF08.zip\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCan't find your profile? Join our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/discord.polymaker.com\/\" target=\"_blank\"\u003eDiscord\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003eand see if the community has made one already!\u003c\/p\u003e\n\u003ch5\u003eFAQ\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWill the spools work in an AMS?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes! We have redesigned the edges of our spools so all Polymaker products will now spin great in the AMS.\u003c\/p\u003e\n\u003cp\u003eThat said - you will need to be careful when using any abrasive materials in the AMS.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between PET and PETG?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePET and PETG differ in their chemical structure, properties, printability, and applications. PETG is more flexible, easier to print, and suitable for 3D printing and medical applications, while PET is more durable and suitable for applications requiring thermal resistance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan you offer 1KG Fiberon™ Spool Options?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUnfortunately we are not offering 1KG Fiberon™ options and this has to do with the increased chance of carbon fiber and glass fiber filament snapping on the spool.\u003c\/p\u003e\n\u003cp\u003eSince carbon fiber and glass fiber filament is more brittle, we spool these with a larger core. This larger core means that 1KG of filament will not fit on a 1KG spool.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2025-05-07T14:02:21-04:00","created_at":"2025-05-07T13:46:08-04:00","vendor":"Polymaker","type":"Polymaker 1.75mm filaments","tags":["1.75mm","carbon fiber","Fiberon","Filaments","petg"],"price":2799,"price_min":2799,"price_max":2799,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":46422856859884,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PMK-FBR-PEG-CF08-500","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Polymaker Fiberon PETG-rCF08 1.75mm 500g","public_title":null,"options":["Default Title"],"price":2799,"weight":850,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6938936714606","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/Polymaker_Fiberon_PETG-rCF08_1.75mm_500g_Product_Picture.webp?v=1746643644"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Polymaker_Fiberon_PETG-rCF08_1.75mm_500g_Product_Picture.webp?v=1746643644","options":["Title"],"media":[{"alt":"Polymaker Fiberon PETG-rCF08 1.75mm 500g Product Picture","id":35332032561388,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Polymaker_Fiberon_PETG-rCF08_1.75mm_500g_Product_Picture.webp?v=1746643644"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Polymaker_Fiberon_PETG-rCF08_1.75mm_500g_Product_Picture.webp?v=1746643644","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003eFiberon™ PETG-rCF08 is a recy\u003c\/span\u003e\u003cspan\u003ecled carbon fiber \u003c\/span\u003e\u003cspan\u003ereinforced PET\u003c\/span\u003e\u003cspan\u003eG filament. It inherits the comp\u003c\/span\u003e\u003cspan\u003er\u003c\/span\u003e\u003cspan\u003eehensi\u003c\/span\u003e\u003cspan\u003eve per\u003c\/span\u003e\u003cspan\u003eformance of P\u003c\/span\u003e\u003cspan\u003eETG, f\u003c\/span\u003e\u003cspan\u003eeaturing \u003c\/span\u003e\u003cspan\u003erecy\u003c\/span\u003e\u003cspan\u003ecled carbon fiber for enhanced su\u003c\/span\u003e\u003cspan\u003er\u003c\/span\u003e\u003cspan\u003eface textu\u003c\/span\u003e\u003cspan\u003ere and \u003c\/span\u003e\u003cspan\u003eimp\u003c\/span\u003e\u003cspan\u003erov\u003c\/span\u003e\u003cspan\u003eed mechanical p\u003c\/span\u003e\u003cspan\u003eroper\u003c\/span\u003e\u003cspan\u003eties.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"product-details__block product-details__text rte\"\u003e\n\u003ch5\u003ePrinting Requirements\u003c\/h5\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cul\u003e\n\u003cli\u003eHardened nozzle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-details__block product-details__text rte\"\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Statement_On_Compliance_With_REACH_1.6_1_de0eeee1-3a63-4fd7-ab3c-236531d22a2e.pdf?v=1731430181\" target=\"_blank\"\u003eREACH\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Statement_On_Compliance_With_RoHS_1.4.pdf?v=1711471841\" target=\"_blank\"\u003eRoHS\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/889_Signed_and_Dated_1.pdf?v=1732549285\" target=\"_blank\"\u003e889\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Profile_Creation_Process_V0.6_1.pdf?v=1731430421\" target=\"_blank\"\u003ePCP\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Polymaker_ISO9001_2024.pdf?v=1731430331\" target=\"_blank\"\u003eISO9001 CERT\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003ePrint settings\u003c\/h5\u003e\n\u003cp\u003ePrinting Temperature: 240˚C - 270˚C\u003cbr\u003eBuild Plate Temperature: 60˚C - 70˚C\u003cbr\u003eChamber Temperature: Room Temperature\u003cbr\u003ePrinting Speed: up to 300mm\/s\u003cbr\u003eCooling Fan: 0%-50%\u003cbr\u003e\u003cbr\u003eDirect Drive:\u003cbr\u003eRetraction Distance: 3mm\u003cbr\u003eRetraction Speed: 40mm\/s\u003cbr\u003eIndirect Drive:\u003cbr\u003eRetraction Distance: 6mm\u003cbr\u003eRetraction Speed: 60mm\/s\u003cbr\u003e\u003cbr\u003eRecommended Drying Settings:\u003cbr\u003eRegular Oven: 65˚C for 3h\u003cbr\u003ePolyDryer: Level 2 for 6h (\u003ca href=\"\/fr\/collections\/fdm-3d-printer-add-ons\/products\/polymaker-polydryer\" target=\"_blank\"\u003ePolyDryer™\u003c\/a\u003e)\u003cbr\u003e(Only if the material has absorbed moisture)\u003cbr\u003e\u003cbr\u003eAnnealing Settings: N\/A\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrinter Profiles:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Bambu-Lab_X1C_Bambu-Studio_0.4_Fiberon-PETG-rCF.zip\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Qidi_Q1Pro_OrcaSlicer_0.4_Fiberon-PETG-rCF08.zip\" target=\"_blank\"\u003eQIDI Tech\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Raise3D_E2CF_IdeaMaker_0.4_Fiberon-PETG-rCF08.zip\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCan't find your profile? Join our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/discord.polymaker.com\/\" target=\"_blank\"\u003eDiscord\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003eand see if the community has made one already!\u003c\/p\u003e\n\u003ch5\u003eFAQ\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWill the spools work in an AMS?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes! We have redesigned the edges of our spools so all Polymaker products will now spin great in the AMS.\u003c\/p\u003e\n\u003cp\u003eThat said - you will need to be careful when using any abrasive materials in the AMS.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between PET and PETG?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePET and PETG differ in their chemical structure, properties, printability, and applications. PETG is more flexible, easier to print, and suitable for 3D printing and medical applications, while PET is more durable and suitable for applications requiring thermal resistance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan you offer 1KG Fiberon™ Spool Options?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUnfortunately we are not offering 1KG Fiberon™ options and this has to do with the increased chance of carbon fiber and glass fiber filament snapping on the spool.\u003c\/p\u003e\n\u003cp\u003eSince carbon fiber and glass fiber filament is more brittle, we spool these with a larger core. This larger core means that 1KG of filament will not fit on a 1KG spool.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}

{"id":8896053281004,"title":"Polymaker Fiberon PETG-ESD 1.75mm 500g","handle":"polymaker-fiberon-petg-esd-1-75mm-500g","description":"\u003cp\u003e\u003cspan\u003eFiberon™ PETG-ESD offers electrostatic discharge (ESD) safety with improved toughness making it a good candidate for applications in electronics industry. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNOTE:  \u003clabel for=\"so-tab-3\"\u003eFiberon\u003c\/label\u003e™ PETG-ESD is compounded with carbon nano-tubes:\u003cbr\u003e\u003ca rel=\"noopener\" href=\"https:\/\/cfpub.epa.gov\/si\/si_public_record_report.cfm?dirEntryId=344783\u0026amp;Lab=NRMRL\u0026amp;subject=Health%20Research\u0026amp;showCriteria=0\u0026amp;searchAll=Waste%20Management%20or%20Materials%20Management\u0026amp;sortBy=revisionDate\" target=\"_blank\"\u003eHere\u003c\/a\u003e is a research regarding ABS compounded with carbon nano-tubes.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003ePrinting Requirements\u003c\/h5\u003e\n\u003cdiv class=\"product-details__block product-details__text rte\"\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cul\u003e\n\u003cli\u003eAll-metal hotend 250˚C+ recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-details__block product-details__text rte\"\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Statement_On_Compliance_With_REACH_1.6_1_de0eeee1-3a63-4fd7-ab3c-236531d22a2e.pdf?v=1731430181\" target=\"_blank\"\u003eREACH\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Statement_On_Compliance_With_RoHS_1.4.pdf?v=1711471841\" target=\"_blank\"\u003eRoHS\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/889_Signed_and_Dated_1.pdf?v=1732549285\" target=\"_blank\"\u003e889\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Profile_Creation_Process_V0.6_1.pdf?v=1731430421\" target=\"_blank\"\u003ePCP\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Polymaker_ISO9001_2024.pdf?v=1731430331\" target=\"_blank\"\u003eISO9001 CERT\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003ePrint settings\u003c\/h5\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ePrinting Temperature: 250˚C - 290˚C\u003cbr\u003eBed Temperature: 70˚C - 80˚C\u003cbr\u003ePrinting Speed: up to 500mm.s\u003cbr\u003eFan: OFF\u003cbr\u003e\u003cbr\u003eDirect Drive:\u003cbr\u003eRetraction Distance: 1mm\u003cbr\u003eRetraction Speed: 20mm\/s\u003cbr\u003eIndirect Drive:\u003cbr\u003eRetraction Distance: 3mm\u003cbr\u003eRetraction Speed: 40mm\/s\u003cbr\u003e\u003cbr\u003eDrying Settings: 65˚C for 3h\u003cbr\u003ePolyDryer™: Level 3 for 6h (\u003ca href=\"\/fr\/collections\/fdm-3d-printer-add-ons\/products\/polymaker-polydryer\" target=\"_blank\"\u003ePolyDryer™\u003c\/a\u003e)\u003cbr\u003e(Only if the material has absorbed moisture)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrinter Profiles:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Bambu-Lab_X1C_Bambu-Studio_0.4_Fiberon-PETG-ESD.zip\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Qidi_Q1Pro_OrcaSlicer_0.4_Fiberon-PETG-ESD.zip\" target=\"_blank\"\u003eQIDI Tech\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Raise-3D_E2CF_ideaMaker_0.4_Fiberon-PETG-ESD.zip\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCan't find your profile? Join our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/discord.polymaker.com\/\" target=\"_blank\"\u003eDiscord\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003eand see if the community has made one already!\u003c\/p\u003e\n\u003ch5\u003eFAQ\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow long will PETG-ESD remain ESD safe?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ESD (Electrostatic Discharge) safety of PETG-ESD filament can degrade over time, depending on environmental factors like humidity, temperature, and exposure to dust or contaminants. PETG-ESD filaments contain conductive additives, which can wear off or lose effectiveness due to surface abrasion or environmental wear. Typically, the ESD-safe properties should remain intact for 1-2 years under controlled conditions, but regular testing is recommended to ensure continued ESD performance. Storing parts in a clean, dry environment can help maintain their ESD properties longer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo you have any further data?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou can find some Surface Resistivity test results\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/PETG-ESD_test_report.pdf?v=1743012101\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill the spools work in an AMS?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes! We have redesigned the edges of our spools so all Polymaker products will now spin great in the AMS.\u003c\/p\u003e\n\u003cp\u003eThat said - you will need to be careful when using any abrasive materials in the AMS.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between PET and PETG?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePET and PETG differ in their chemical structure, properties, printability, and applications. PETG is more flexible, easier to print, and suitable for 3D printing and medical applications, while PET is more durable and suitable for applications requiring thermal resistance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2025-05-07T13:43:07-04:00","created_at":"2025-05-07T12:59:50-04:00","vendor":"Polymaker","type":"Polymaker 1.75mm filaments","tags":["1.75mm","ESD safe","Fiberon","Filaments","petg","PolyLite"],"price":4699,"price_min":4699,"price_max":4699,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":46422817931500,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PMK-FBR-PEG-ESD-500","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Polymaker Fiberon PETG-ESD 1.75mm 500g","public_title":null,"options":["Default Title"],"price":4699,"weight":850,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6938936714651","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/Polymaker_Fiberon_PETG-ESD_1.75mm_500g_Product_Picture.webp?v=1746643668"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Polymaker_Fiberon_PETG-ESD_1.75mm_500g_Product_Picture.webp?v=1746643668","options":["Title"],"media":[{"alt":"Polymaker Fiberon PETG-ESD 1.75mm 500g Product Picture","id":35331928064236,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Polymaker_Fiberon_PETG-ESD_1.75mm_500g_Product_Picture.webp?v=1746643668"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Polymaker_Fiberon_PETG-ESD_1.75mm_500g_Product_Picture.webp?v=1746643668","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003eFiberon™ PETG-ESD offers electrostatic discharge (ESD) safety with improved toughness making it a good candidate for applications in electronics industry. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNOTE:  \u003clabel for=\"so-tab-3\"\u003eFiberon\u003c\/label\u003e™ PETG-ESD is compounded with carbon nano-tubes:\u003cbr\u003e\u003ca rel=\"noopener\" href=\"https:\/\/cfpub.epa.gov\/si\/si_public_record_report.cfm?dirEntryId=344783\u0026amp;Lab=NRMRL\u0026amp;subject=Health%20Research\u0026amp;showCriteria=0\u0026amp;searchAll=Waste%20Management%20or%20Materials%20Management\u0026amp;sortBy=revisionDate\" target=\"_blank\"\u003eHere\u003c\/a\u003e is a research regarding ABS compounded with carbon nano-tubes.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003ePrinting Requirements\u003c\/h5\u003e\n\u003cdiv class=\"product-details__block product-details__text rte\"\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cul\u003e\n\u003cli\u003eAll-metal hotend 250˚C+ recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-details__block product-details__text rte\"\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Statement_On_Compliance_With_REACH_1.6_1_de0eeee1-3a63-4fd7-ab3c-236531d22a2e.pdf?v=1731430181\" target=\"_blank\"\u003eREACH\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Statement_On_Compliance_With_RoHS_1.4.pdf?v=1711471841\" target=\"_blank\"\u003eRoHS\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/889_Signed_and_Dated_1.pdf?v=1732549285\" target=\"_blank\"\u003e889\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Profile_Creation_Process_V0.6_1.pdf?v=1731430421\" target=\"_blank\"\u003ePCP\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Polymaker_ISO9001_2024.pdf?v=1731430331\" target=\"_blank\"\u003eISO9001 CERT\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003ePrint settings\u003c\/h5\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ePrinting Temperature: 250˚C - 290˚C\u003cbr\u003eBed Temperature: 70˚C - 80˚C\u003cbr\u003ePrinting Speed: up to 500mm.s\u003cbr\u003eFan: OFF\u003cbr\u003e\u003cbr\u003eDirect Drive:\u003cbr\u003eRetraction Distance: 1mm\u003cbr\u003eRetraction Speed: 20mm\/s\u003cbr\u003eIndirect Drive:\u003cbr\u003eRetraction Distance: 3mm\u003cbr\u003eRetraction Speed: 40mm\/s\u003cbr\u003e\u003cbr\u003eDrying Settings: 65˚C for 3h\u003cbr\u003ePolyDryer™: Level 3 for 6h (\u003ca href=\"\/fr\/collections\/fdm-3d-printer-add-ons\/products\/polymaker-polydryer\" target=\"_blank\"\u003ePolyDryer™\u003c\/a\u003e)\u003cbr\u003e(Only if the material has absorbed moisture)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrinter Profiles:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Bambu-Lab_X1C_Bambu-Studio_0.4_Fiberon-PETG-ESD.zip\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Qidi_Q1Pro_OrcaSlicer_0.4_Fiberon-PETG-ESD.zip\" target=\"_blank\"\u003eQIDI Tech\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Raise-3D_E2CF_ideaMaker_0.4_Fiberon-PETG-ESD.zip\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCan't find your profile? Join our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/discord.polymaker.com\/\" target=\"_blank\"\u003eDiscord\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003eand see if the community has made one already!\u003c\/p\u003e\n\u003ch5\u003eFAQ\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHow long will PETG-ESD remain ESD safe?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ESD (Electrostatic Discharge) safety of PETG-ESD filament can degrade over time, depending on environmental factors like humidity, temperature, and exposure to dust or contaminants. PETG-ESD filaments contain conductive additives, which can wear off or lose effectiveness due to surface abrasion or environmental wear. Typically, the ESD-safe properties should remain intact for 1-2 years under controlled conditions, but regular testing is recommended to ensure continued ESD performance. Storing parts in a clean, dry environment can help maintain their ESD properties longer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo you have any further data?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou can find some Surface Resistivity test results\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/PETG-ESD_test_report.pdf?v=1743012101\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill the spools work in an AMS?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes! We have redesigned the edges of our spools so all Polymaker products will now spin great in the AMS.\u003c\/p\u003e\n\u003cp\u003eThat said - you will need to be careful when using any abrasive materials in the AMS.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between PET and PETG?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePET and PETG differ in their chemical structure, properties, printability, and applications. PETG is more flexible, easier to print, and suitable for 3D printing and medical applications, while PET is more durable and suitable for applications requiring thermal resistance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}

{"id":8896046760172,"title":"Polymaker Fiberon PA12-CF10 1.75mm 500g","handle":"polymaker-fiberon-pa12-cf10-1-75mm-500g","description":"\u003cp\u003e\u003cspan\u003eFiberon™ PA12-CF10 is carbon fiber reinforced long chain copolyamide filament. Thanks to its chemical structure, this product has lower moisture sensitivity compared to PA6\/66 and PA6-based materials, and better mechanical properties than PA12-based materials. In addition, the carbon fiber reinforcement and Warp-freeTM technology enhance the size stability of the prints produced with this material.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFiberon™ PA12-CF10 is the same great formula as PolyMide PA12-CF, although Fiberon™ PA12-CF10 may print in a slightly darker black shade color than its predecessor.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003ePrinting Requirements\u003c\/h5\u003e\n\u003cdiv class=\"product-details__block product-details__text rte\"\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cul\u003e\n\u003cli\u003eAll-metal hotend 280˚C+\u003c\/li\u003e\n\u003cli\u003eHardened nozzle\u003c\/li\u003e\n\u003cli\u003eFilament dryer\u003c\/li\u003e\n\u003cli\u003eAnnealing post printing\u003c\/li\u003e\n\u003cli\u003eMoisture conditioning after Annealing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-details__block product-details__text rte\"\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Statement_On_Compliance_With_REACH_1.6_1_de0eeee1-3a63-4fd7-ab3c-236531d22a2e.pdf?v=1731430181\" target=\"_blank\"\u003eREACH\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Statement_On_Compliance_With_RoHS_1.4.pdf?v=1711471841\" target=\"_blank\"\u003eRoHS\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/889_Signed_and_Dated_1.pdf?v=1732549285\" target=\"_blank\"\u003e889\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Profile_Creation_Process_V0.6_1.pdf?v=1731430421\" target=\"_blank\"\u003ePCP\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Polymaker_ISO9001_2024.pdf?v=1731430331\" target=\"_blank\"\u003eISO9001 CERT\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003ePrint settings\u003c\/h5\u003e\n\u003cp\u003ePrinting Temperature: 280˚C - 300˚C\u003cbr\u003eBuild Plate Temperature: 40˚C - 50˚C\u003cbr\u003eChamber Temperature: Room Temperature\u003cbr\u003ePrinting Speed: up to 300mm\/s\u003cbr\u003eCooling Fan: OFF\u003c\/p\u003e\n\u003cp\u003eDirect Drive:\u003cbr\u003eRetraction Distance: 3mm\u003cbr\u003eRetraction Speed: 40mm\/s\u003cbr\u003eIndirect Drive:\u003cbr\u003eRetraction Distance: 6mm\u003cbr\u003eRetraction Speed: 60mm\/s\u003cbr\u003e\u003cbr\u003eRecommended Drying Settings:\u003cbr\u003eRegular Oven: 100˚C for 10h\u003cbr\u003ePolyDryer: Level 3 for 18h (\u003ca href=\"\/fr\/collections\/fdm-3d-printer-add-ons\/products\/polymaker-polydryer\" target=\"_blank\"\u003ePolyDryer™\u003c\/a\u003e)\u003cbr\u003e(Only if the material has absorbed moisture)\u003cbr\u003e\u003cbr\u003eAnnealing Settings: 100˚C for 16h\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrinter Profiles:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Bambu-Lab_X1C_Bambu-Studio_0.4_Fiberon-PA12-CF.zip\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Qidi_Q1Pro_OrcaSlicer_0.4_Fiberon-PA12-CF10.zip\" target=\"_blank\"\u003eQIDI Tech\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Raise-3D_E2CF_ideaMaker_0.4_Fiberon-PA12-CF10.zip\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCan't find your profile? Join our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/discord.polymaker.com\/\" target=\"_blank\"\u003eDiscord\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003eand see if the community has made one already!\u003c\/p\u003e\n\u003ch5\u003eFAQ\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is annealing?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou can find out more about annealing\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/us.polymaker.com\/blogs\/3d-printing-tips\/what-is-annealing-and-why-do-we-do-it\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is moisture conditioning?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMoisture conditioning refers to allowing the print to absorb moisture. This is inevitble since nylons are hygroscopic, but you can expedite the process by keeping the print in a high humidity climate, or submerging them in water, for 48 hours. All of our test specimens were annealed at 100˚C for 16 hours, and then immerged in water at 60˚C for 48 hours. The average moisture content of specimens is 2.57%.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I anneal before or after moisture conditioning?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen you anneal in a convection oven, you will dry the part out. So if you moisture condition before annealing - you will need to moisture condition again after. So we would suggest to moisture condition after annealing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy do you use such a low build plate temperature with your nylons?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur nylons come with our Warp-Free™ Technology. In order for this Warp-Free™ technology to work as it should - we want to make sure the build plate and the ambient air temperatures are both below 50˚C. We then anneal the print after to get it's full strength.\u003c\/p\u003e\n\u003cp\u003eLearn more\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/us.polymaker.com\/blogs\/finding-the-right-filament\/polymakers-technologies\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill the spools work in an AMS?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes! We have redesigned the edges of our spools so all Polymaker products will now spin great in the AMS.\u003c\/p\u003e\n\u003cp\u003eThat said - you will need to be careful when using any abrasive materials in the AMS.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan you offer 1KG Fiberon™ Spool Options?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUnfortunately we are not offering 1KG Fiberon™ options and this has to do with the increased chance of carbon fiber and glass fiber filament snapping on the spool.\u003c\/p\u003e\n\u003cp\u003eSince carbon fiber and glass fiber filament is more brittle, we spool these with a larger core. This larger core means that 1KG of filament will not fit on a 1KG spool.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2025-05-07T12:54:29-04:00","created_at":"2025-05-07T12:36:36-04:00","vendor":"Polymaker","type":"Polymaker 1.75mm filaments","tags":["1.75mm","carbon fiber","Fiberon","Filaments","nylon","Pa12"],"price":9899,"price_min":9899,"price_max":9899,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":46422763438316,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PMK-FBR-PA12-CF10-500","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Polymaker Fiberon PA12-CF10 1.75mm 500g","public_title":null,"options":["Default Title"],"price":9899,"weight":850,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6938936714637","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/Polymaker_Fiberon_PA12-10_1.75mm_500g_Product_Picture.webp?v=1746643702"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Polymaker_Fiberon_PA12-10_1.75mm_500g_Product_Picture.webp?v=1746643702","options":["Title"],"media":[{"alt":"Polymaker Fiberon PA12 CF10 1.75mm 500g Product Picture","id":35331734470892,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Polymaker_Fiberon_PA12-10_1.75mm_500g_Product_Picture.webp?v=1746643702"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Polymaker_Fiberon_PA12-10_1.75mm_500g_Product_Picture.webp?v=1746643702","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003eFiberon™ PA12-CF10 is carbon fiber reinforced long chain copolyamide filament. Thanks to its chemical structure, this product has lower moisture sensitivity compared to PA6\/66 and PA6-based materials, and better mechanical properties than PA12-based materials. In addition, the carbon fiber reinforcement and Warp-freeTM technology enhance the size stability of the prints produced with this material.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFiberon™ PA12-CF10 is the same great formula as PolyMide PA12-CF, although Fiberon™ PA12-CF10 may print in a slightly darker black shade color than its predecessor.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003ePrinting Requirements\u003c\/h5\u003e\n\u003cdiv class=\"product-details__block product-details__text rte\"\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cul\u003e\n\u003cli\u003eAll-metal hotend 280˚C+\u003c\/li\u003e\n\u003cli\u003eHardened nozzle\u003c\/li\u003e\n\u003cli\u003eFilament dryer\u003c\/li\u003e\n\u003cli\u003eAnnealing post printing\u003c\/li\u003e\n\u003cli\u003eMoisture conditioning after Annealing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-details__block product-details__text rte\"\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Statement_On_Compliance_With_REACH_1.6_1_de0eeee1-3a63-4fd7-ab3c-236531d22a2e.pdf?v=1731430181\" target=\"_blank\"\u003eREACH\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Statement_On_Compliance_With_RoHS_1.4.pdf?v=1711471841\" target=\"_blank\"\u003eRoHS\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/889_Signed_and_Dated_1.pdf?v=1732549285\" target=\"_blank\"\u003e889\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Profile_Creation_Process_V0.6_1.pdf?v=1731430421\" target=\"_blank\"\u003ePCP\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Polymaker_ISO9001_2024.pdf?v=1731430331\" target=\"_blank\"\u003eISO9001 CERT\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003ePrint settings\u003c\/h5\u003e\n\u003cp\u003ePrinting Temperature: 280˚C - 300˚C\u003cbr\u003eBuild Plate Temperature: 40˚C - 50˚C\u003cbr\u003eChamber Temperature: Room Temperature\u003cbr\u003ePrinting Speed: up to 300mm\/s\u003cbr\u003eCooling Fan: OFF\u003c\/p\u003e\n\u003cp\u003eDirect Drive:\u003cbr\u003eRetraction Distance: 3mm\u003cbr\u003eRetraction Speed: 40mm\/s\u003cbr\u003eIndirect Drive:\u003cbr\u003eRetraction Distance: 6mm\u003cbr\u003eRetraction Speed: 60mm\/s\u003cbr\u003e\u003cbr\u003eRecommended Drying Settings:\u003cbr\u003eRegular Oven: 100˚C for 10h\u003cbr\u003ePolyDryer: Level 3 for 18h (\u003ca href=\"\/fr\/collections\/fdm-3d-printer-add-ons\/products\/polymaker-polydryer\" target=\"_blank\"\u003ePolyDryer™\u003c\/a\u003e)\u003cbr\u003e(Only if the material has absorbed moisture)\u003cbr\u003e\u003cbr\u003eAnnealing Settings: 100˚C for 16h\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrinter Profiles:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Bambu-Lab_X1C_Bambu-Studio_0.4_Fiberon-PA12-CF.zip\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Qidi_Q1Pro_OrcaSlicer_0.4_Fiberon-PA12-CF10.zip\" target=\"_blank\"\u003eQIDI Tech\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Raise-3D_E2CF_ideaMaker_0.4_Fiberon-PA12-CF10.zip\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCan't find your profile? Join our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/discord.polymaker.com\/\" target=\"_blank\"\u003eDiscord\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003eand see if the community has made one already!\u003c\/p\u003e\n\u003ch5\u003eFAQ\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is annealing?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou can find out more about annealing\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/us.polymaker.com\/blogs\/3d-printing-tips\/what-is-annealing-and-why-do-we-do-it\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is moisture conditioning?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMoisture conditioning refers to allowing the print to absorb moisture. This is inevitble since nylons are hygroscopic, but you can expedite the process by keeping the print in a high humidity climate, or submerging them in water, for 48 hours. All of our test specimens were annealed at 100˚C for 16 hours, and then immerged in water at 60˚C for 48 hours. The average moisture content of specimens is 2.57%.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I anneal before or after moisture conditioning?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen you anneal in a convection oven, you will dry the part out. So if you moisture condition before annealing - you will need to moisture condition again after. So we would suggest to moisture condition after annealing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy do you use such a low build plate temperature with your nylons?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur nylons come with our Warp-Free™ Technology. In order for this Warp-Free™ technology to work as it should - we want to make sure the build plate and the ambient air temperatures are both below 50˚C. We then anneal the print after to get it's full strength.\u003c\/p\u003e\n\u003cp\u003eLearn more\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/us.polymaker.com\/blogs\/finding-the-right-filament\/polymakers-technologies\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill the spools work in an AMS?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes! We have redesigned the edges of our spools so all Polymaker products will now spin great in the AMS.\u003c\/p\u003e\n\u003cp\u003eThat said - you will need to be careful when using any abrasive materials in the AMS.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan you offer 1KG Fiberon™ Spool Options?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUnfortunately we are not offering 1KG Fiberon™ options and this has to do with the increased chance of carbon fiber and glass fiber filament snapping on the spool.\u003c\/p\u003e\n\u003cp\u003eSince carbon fiber and glass fiber filament is more brittle, we spool these with a larger core. This larger core means that 1KG of filament will not fit on a 1KG spool.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}

{"id":8896042533100,"title":"Polymaker Fiberon PA6-GF25 1.75mm 500g","handle":"polymaker-fiberon-pa6-gf25-1-75mm-500g","description":"\u003cp\u003e\u003cspan\u003eFiberon™ PA6-GF25 is a glass fiber reinforced PA6 (Nylon 6) filament. The material exhibits excellent thermal and mechanical properties without sacrificing the layer adhesion.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFormerly called PolyMide PA6-GF.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003ePrinting Requirements\u003c\/h5\u003e\n\u003cdiv class=\"product-details__block product-details__text rte\"\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cul\u003e\n\u003cli\u003eAll-metal hotend 280˚C+\u003c\/li\u003e\n\u003cli\u003eHardened nozzle\u003c\/li\u003e\n\u003cli\u003eFilament dryer\u003c\/li\u003e\n\u003cli\u003eAnnealing post printing\u003c\/li\u003e\n\u003cli\u003eMoisture conditioning after Annealing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-details__block product-details__text rte\"\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Statement_On_Compliance_With_REACH_1.6_1_de0eeee1-3a63-4fd7-ab3c-236531d22a2e.pdf?v=1731430181\" target=\"_blank\"\u003eREACH\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Statement_On_Compliance_With_RoHS_1.4.pdf?v=1711471841\" target=\"_blank\"\u003eRoHS\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/889_Signed_and_Dated_1.pdf?v=1732549285\" target=\"_blank\"\u003e889\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Profile_Creation_Process_V0.6_1.pdf?v=1731430421\" target=\"_blank\"\u003ePCP\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Polymaker_ISO9001_2024.pdf?v=1731430331\" target=\"_blank\"\u003eISO9001 CERT\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003ePrint settings\u003c\/h5\u003e\n\u003cp\u003emperature: 280˚C - 300˚C\u003cbr\u003eBuild Plate Temperature: 40˚C - 50˚C\u003cbr\u003eChamber Temperature: Room Temperature\u003cbr\u003ePrinting Speed: up to 300mm\/s\u003cbr\u003eCooling Fan: OFF\u003cbr\u003e\u003cbr\u003eDirect Drive:\u003cbr\u003eRetraction Distance: 3mm\u003cbr\u003eRetraction Speed: 40mm\/s\u003cbr\u003eIndirect Drive:\u003cbr\u003eRetraction Distance: 6mm\u003cbr\u003eRetraction Speed: 60mm\/s\u003cbr\u003e\u003cbr\u003eRecommended Drying Settings:\u003cbr\u003eRegular Oven: 100˚C for 10h\u003cbr\u003ePolyDryer: Level 3 for 18h (\u003ca href=\"\/fr\/collections\/fdm-3d-printer-add-ons\/products\/polymaker-polydryer\" target=\"_blank\"\u003ePolyDryer™\u003c\/a\u003e)\u003cbr\u003e(Only if the material has absorbed moisture)\u003cbr\u003e\u003cbr\u003eAnnealing Settings: 100˚C for 16h\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrinter Profiles:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Bambu-Lab_X1C_Bambu-Studio_0.4_Fiberon-PA6-GF.zip\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Qidi_Q1Pro_OrcaSlicer_0.4_Fiberon-PA6-GF25.zip\" target=\"_blank\"\u003eQIDI Tech\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Raise-3D_E2CF_ideaMaker_0.4_Fiberon-PA6-GF25.zip\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCan't find your profile? Join our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/discord.polymaker.com\/\" target=\"_blank\"\u003eDiscord\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003eand see if the community has made one already!\u003c\/p\u003e\n\u003ch5\u003eFAQ\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is annealing?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou can find out more about annealing\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/us.polymaker.com\/blogs\/3d-printing-tips\/what-is-annealing-and-why-do-we-do-it\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is moisture conditioning?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMoisture conditioning refers to allowing the print to absorb moisture. This is inevitble since nylons are hygroscopic, but you can expedite the process by keeping the print in a high humidity climate, or submerging them in water, for 48 hours. All of our test specimens were annealed at 100˚C for 16 hours, and then immerged in water at 60˚C for 48 hours. The average moisture content of specimens is 2.57%.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I anneal before or after moisture conditioning?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen you anneal in a convection oven, you will dry the part out. So if you moisture condition before annealing - you will need to moisture condition again after. So we would suggest to moisture condition after annealing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy do you use such a low build plate temperature with your nylons?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur nylons come with our Warp-Free™ Technology. In order for this Warp-Free™ technology to work as it should - we want to make sure the build plate and the ambient air temperatures are both below 50˚C. We then anneal the print after to get it's full strength.\u003c\/p\u003e\n\u003cp\u003eLearn more\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/us.polymaker.com\/blogs\/finding-the-right-filament\/polymakers-technologies\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill the spools work in an AMS?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes! We have redesigned the edges of our spools so all Polymaker products will now spin great in the AMS.\u003c\/p\u003e\n\u003cp\u003eThat said - you will need to be careful when using any abrasive materials in the AMS.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan you offer 1KG Fiberon™ Spool Options?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUnfortunately we are not offering 1KG Fiberon™ options and this has to do with the increased chance of carbon fiber and glass fiber filament snapping on the spool.\u003c\/p\u003e\n\u003cp\u003eSince carbon fiber and glass fiber filament is more brittle, we spool these with a larger core. This larger core means that 1KG of filament will not fit on a 1KG spool.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2025-05-07T12:34:49-04:00","created_at":"2025-05-07T12:15:05-04:00","vendor":"Polymaker","type":"Polymaker 1.75mm filaments","tags":["1.75mm","Fiberon","Filaments","glass fiber","nylon","PA6"],"price":4199,"price_min":4199,"price_max":4199,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":46422665724140,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PMK-FBR-PA6-GF25-500","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Polymaker Fiberon PA6-GF25 1.75mm 500g","public_title":null,"options":["Default Title"],"price":4199,"weight":850,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6938936714620","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/Polymaker_Fiberon_PA6-GF25_1.75mm_500g_Product_Picture.webp?v=1746643726"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Polymaker_Fiberon_PA6-GF25_1.75mm_500g_Product_Picture.webp?v=1746643726","options":["Title"],"media":[{"alt":"Polymaker Fiberon PA6-GF25 1.75mm 500g Product Picture","id":35331637477612,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Polymaker_Fiberon_PA6-GF25_1.75mm_500g_Product_Picture.webp?v=1746643726"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Polymaker_Fiberon_PA6-GF25_1.75mm_500g_Product_Picture.webp?v=1746643726","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003eFiberon™ PA6-GF25 is a glass fiber reinforced PA6 (Nylon 6) filament. The material exhibits excellent thermal and mechanical properties without sacrificing the layer adhesion.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFormerly called PolyMide PA6-GF.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003ePrinting Requirements\u003c\/h5\u003e\n\u003cdiv class=\"product-details__block product-details__text rte\"\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cul\u003e\n\u003cli\u003eAll-metal hotend 280˚C+\u003c\/li\u003e\n\u003cli\u003eHardened nozzle\u003c\/li\u003e\n\u003cli\u003eFilament dryer\u003c\/li\u003e\n\u003cli\u003eAnnealing post printing\u003c\/li\u003e\n\u003cli\u003eMoisture conditioning after Annealing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-details__block product-details__text rte\"\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Statement_On_Compliance_With_REACH_1.6_1_de0eeee1-3a63-4fd7-ab3c-236531d22a2e.pdf?v=1731430181\" target=\"_blank\"\u003eREACH\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Statement_On_Compliance_With_RoHS_1.4.pdf?v=1711471841\" target=\"_blank\"\u003eRoHS\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/889_Signed_and_Dated_1.pdf?v=1732549285\" target=\"_blank\"\u003e889\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Profile_Creation_Process_V0.6_1.pdf?v=1731430421\" target=\"_blank\"\u003ePCP\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Polymaker_ISO9001_2024.pdf?v=1731430331\" target=\"_blank\"\u003eISO9001 CERT\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003ePrint settings\u003c\/h5\u003e\n\u003cp\u003emperature: 280˚C - 300˚C\u003cbr\u003eBuild Plate Temperature: 40˚C - 50˚C\u003cbr\u003eChamber Temperature: Room Temperature\u003cbr\u003ePrinting Speed: up to 300mm\/s\u003cbr\u003eCooling Fan: OFF\u003cbr\u003e\u003cbr\u003eDirect Drive:\u003cbr\u003eRetraction Distance: 3mm\u003cbr\u003eRetraction Speed: 40mm\/s\u003cbr\u003eIndirect Drive:\u003cbr\u003eRetraction Distance: 6mm\u003cbr\u003eRetraction Speed: 60mm\/s\u003cbr\u003e\u003cbr\u003eRecommended Drying Settings:\u003cbr\u003eRegular Oven: 100˚C for 10h\u003cbr\u003ePolyDryer: Level 3 for 18h (\u003ca href=\"\/fr\/collections\/fdm-3d-printer-add-ons\/products\/polymaker-polydryer\" target=\"_blank\"\u003ePolyDryer™\u003c\/a\u003e)\u003cbr\u003e(Only if the material has absorbed moisture)\u003cbr\u003e\u003cbr\u003eAnnealing Settings: 100˚C for 16h\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrinter Profiles:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Bambu-Lab_X1C_Bambu-Studio_0.4_Fiberon-PA6-GF.zip\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Qidi_Q1Pro_OrcaSlicer_0.4_Fiberon-PA6-GF25.zip\" target=\"_blank\"\u003eQIDI Tech\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Raise-3D_E2CF_ideaMaker_0.4_Fiberon-PA6-GF25.zip\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCan't find your profile? Join our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/discord.polymaker.com\/\" target=\"_blank\"\u003eDiscord\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003eand see if the community has made one already!\u003c\/p\u003e\n\u003ch5\u003eFAQ\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is annealing?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou can find out more about annealing\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/us.polymaker.com\/blogs\/3d-printing-tips\/what-is-annealing-and-why-do-we-do-it\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is moisture conditioning?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMoisture conditioning refers to allowing the print to absorb moisture. This is inevitble since nylons are hygroscopic, but you can expedite the process by keeping the print in a high humidity climate, or submerging them in water, for 48 hours. All of our test specimens were annealed at 100˚C for 16 hours, and then immerged in water at 60˚C for 48 hours. The average moisture content of specimens is 2.57%.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I anneal before or after moisture conditioning?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen you anneal in a convection oven, you will dry the part out. So if you moisture condition before annealing - you will need to moisture condition again after. So we would suggest to moisture condition after annealing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy do you use such a low build plate temperature with your nylons?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur nylons come with our Warp-Free™ Technology. In order for this Warp-Free™ technology to work as it should - we want to make sure the build plate and the ambient air temperatures are both below 50˚C. We then anneal the print after to get it's full strength.\u003c\/p\u003e\n\u003cp\u003eLearn more\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/us.polymaker.com\/blogs\/finding-the-right-filament\/polymakers-technologies\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill the spools work in an AMS?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes! We have redesigned the edges of our spools so all Polymaker products will now spin great in the AMS.\u003c\/p\u003e\n\u003cp\u003eThat said - you will need to be careful when using any abrasive materials in the AMS.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan you offer 1KG Fiberon™ Spool Options?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUnfortunately we are not offering 1KG Fiberon™ options and this has to do with the increased chance of carbon fiber and glass fiber filament snapping on the spool.\u003c\/p\u003e\n\u003cp\u003eSince carbon fiber and glass fiber filament is more brittle, we spool these with a larger core. This larger core means that 1KG of filament will not fit on a 1KG spool.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}

{"id":8896030343404,"title":"Polymaker Fiberon PPS-CF10 1.75mm 500g","handle":"polymaker-fiberon-pps-cf10-1-75mm-500g","description":"\u003cp\u003e\u003cspan\u003eFiberon™ PPS-CF10 is a carbon fiber reinforced PPS (Polyphenylene sulfide) filament, with minimal warping during mechanical strength, high heat resistance, chemical resistance, printing and no need for a heated chamber. With exceptional V0 flame retardancy, and moisture insensitivity, it's specifically designed for professionals operating in extreme conditions.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5 class=\"product-details__block product-details__text rte\"\u003ePrinting Requirements\u003c\/h5\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cul\u003e\n\u003cli\u003eAll-metal hotend 310˚C+\u003c\/li\u003e\n\u003cli\u003eHardened nozzle\u003c\/li\u003e\n\u003cli\u003eAnnealing post printing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-details__block product-details__text rte\"\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Statement_On_Compliance_With_REACH_1.6_1_de0eeee1-3a63-4fd7-ab3c-236531d22a2e.pdf?v=1731430181\" target=\"_blank\"\u003eREACH\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Statement_On_Compliance_With_RoHS_1.4.pdf?v=1711471841\" target=\"_blank\"\u003eRoHS\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/889_Signed_and_Dated_1.pdf?v=1732549285\" target=\"_blank\"\u003e889\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Profile_Creation_Process_V0.6_1.pdf?v=1731430421\" target=\"_blank\"\u003ePCP\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Polymaker_ISO9001_2024.pdf?v=1731430331\" target=\"_blank\"\u003eISO9001 CERT\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003ePrint settings\u003c\/h5\u003e\n\u003cp\u003ePrinting Temperature: 310˚C - 350˚C\u003cbr\u003eBuild Plate Temperature: 80˚C - 90˚C\u003cbr\u003eChamber Temperature: Room Temperature\u003cbr\u003ePrinting Speed: up to 300mm\/s\u003cbr\u003eCooling Fan: OFF\u003cbr\u003e\u003cbr\u003eDirect Drive:\u003cbr\u003eRetraction Distance: 3mm\u003cbr\u003eRetraction Speed: 40mm\/s\u003cbr\u003eIndirect Drive:\u003cbr\u003eRetraction Distance: 6mm\u003cbr\u003eRetraction Speed: 60mm\/s\u003cbr\u003e\u003cbr\u003eRecommended Drying Settings:\u003cbr\u003eRegular Oven: 100˚C for 10h\u003cbr\u003ePolyDryer: Level 3 for 18h (\u003ca href=\"\/fr\/collections\/fdm-3d-printer-add-ons\/products\/polymaker-polydryer\" target=\"_blank\"\u003ePolyDryer™\u003c\/a\u003e)\u003cbr\u003e(Only if the material has absorbed moisture)\u003cbr\u003e\u003cbr\u003eAnnealing Settings: 125˚C for 16h\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrinter Profiles:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Bambu-Lab_X1E_Bambu-Studio_0.4_Fiberon-PPS-CF.zip\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Qidi_Q1Pro_OrcaSlicer_0.4_Fiberon-PPS-CF10.zip\" target=\"_blank\"\u003eQIDI Tech\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCan't find your profile? Join our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/discord.polymaker.com\/\" target=\"_blank\"\u003eDiscord\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003eand see if the community has made one already\u003c\/p\u003e\n\u003ch5\u003eFAQ\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a hotend that can reach above 300˚C?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes -we definitely recommend printing with a hotend that can reach at least 310˚C. It might be possible to print at 300˚C, but you will need to print very slowly and you run the risk of having reduced layer adhesion.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is annealing?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou can find out more about annealing\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/us.polymaker.com\/blogs\/3d-printing-tips\/what-is-annealing-and-why-do-we-do-it\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill the spools work in an AMS?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhile the spools will roll fine in the AMS, PPS-CF is very brittle on the spool meaning that if it goes through too tight of twists or turns - it may snap. We recommend not using an AMS and having a direct path to the printer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan you offer 1KG Fiberon™ Spool Options?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUnfortunately we are not offering 1KG Fiberon™ options and this has to do with the increased chance of carbon fiber and glass fiber filament snapping on the spool.\u003c\/p\u003e\n\u003cp\u003eSince carbon fiber and glass fiber filament is more brittle, we spool these with a larger core. This larger core means that 1KG of filament will not fit on a 1KG spool.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2025-05-07T12:10:02-04:00","created_at":"2025-05-07T11:02:39-04:00","vendor":"Polymaker","type":"Polymaker 1.75mm filaments","tags":["1.75mm","carbon fiber","Fiberon","Filaments","Polyphenylene sulfide","PPS","PPS CF"],"price":9899,"price_min":9899,"price_max":9899,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":46422581313772,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PMK-FBR-PPS-CF10-500","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Polymaker Fiberon PPS-CF10 1.75mm 500g","public_title":null,"options":["Default Title"],"price":9899,"weight":850,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6938936714583","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/Polymaker_Fiberon_PPS-CF10_1.75mm_500g_Product_Picture.webp?v=1746643748"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Polymaker_Fiberon_PPS-CF10_1.75mm_500g_Product_Picture.webp?v=1746643748","options":["Title"],"media":[{"alt":"Polymaker Fiberon PPS-CF10 1.75mm 500g Product Picture","id":35331455156460,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Polymaker_Fiberon_PPS-CF10_1.75mm_500g_Product_Picture.webp?v=1746643748"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Polymaker_Fiberon_PPS-CF10_1.75mm_500g_Product_Picture.webp?v=1746643748","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003eFiberon™ PPS-CF10 is a carbon fiber reinforced PPS (Polyphenylene sulfide) filament, with minimal warping during mechanical strength, high heat resistance, chemical resistance, printing and no need for a heated chamber. With exceptional V0 flame retardancy, and moisture insensitivity, it's specifically designed for professionals operating in extreme conditions.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5 class=\"product-details__block product-details__text rte\"\u003ePrinting Requirements\u003c\/h5\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cul\u003e\n\u003cli\u003eAll-metal hotend 310˚C+\u003c\/li\u003e\n\u003cli\u003eHardened nozzle\u003c\/li\u003e\n\u003cli\u003eAnnealing post printing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-details__block product-details__text rte\"\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Statement_On_Compliance_With_REACH_1.6_1_de0eeee1-3a63-4fd7-ab3c-236531d22a2e.pdf?v=1731430181\" target=\"_blank\"\u003eREACH\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Statement_On_Compliance_With_RoHS_1.4.pdf?v=1711471841\" target=\"_blank\"\u003eRoHS\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/889_Signed_and_Dated_1.pdf?v=1732549285\" target=\"_blank\"\u003e889\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Profile_Creation_Process_V0.6_1.pdf?v=1731430421\" target=\"_blank\"\u003ePCP\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Polymaker_ISO9001_2024.pdf?v=1731430331\" target=\"_blank\"\u003eISO9001 CERT\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003ePrint settings\u003c\/h5\u003e\n\u003cp\u003ePrinting Temperature: 310˚C - 350˚C\u003cbr\u003eBuild Plate Temperature: 80˚C - 90˚C\u003cbr\u003eChamber Temperature: Room Temperature\u003cbr\u003ePrinting Speed: up to 300mm\/s\u003cbr\u003eCooling Fan: OFF\u003cbr\u003e\u003cbr\u003eDirect Drive:\u003cbr\u003eRetraction Distance: 3mm\u003cbr\u003eRetraction Speed: 40mm\/s\u003cbr\u003eIndirect Drive:\u003cbr\u003eRetraction Distance: 6mm\u003cbr\u003eRetraction Speed: 60mm\/s\u003cbr\u003e\u003cbr\u003eRecommended Drying Settings:\u003cbr\u003eRegular Oven: 100˚C for 10h\u003cbr\u003ePolyDryer: Level 3 for 18h (\u003ca href=\"\/fr\/collections\/fdm-3d-printer-add-ons\/products\/polymaker-polydryer\" target=\"_blank\"\u003ePolyDryer™\u003c\/a\u003e)\u003cbr\u003e(Only if the material has absorbed moisture)\u003cbr\u003e\u003cbr\u003eAnnealing Settings: 125˚C for 16h\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrinter Profiles:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Bambu-Lab_X1E_Bambu-Studio_0.4_Fiberon-PPS-CF.zip\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Qidi_Q1Pro_OrcaSlicer_0.4_Fiberon-PPS-CF10.zip\" target=\"_blank\"\u003eQIDI Tech\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCan't find your profile? Join our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/discord.polymaker.com\/\" target=\"_blank\"\u003eDiscord\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003eand see if the community has made one already\u003c\/p\u003e\n\u003ch5\u003eFAQ\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a hotend that can reach above 300˚C?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes -we definitely recommend printing with a hotend that can reach at least 310˚C. It might be possible to print at 300˚C, but you will need to print very slowly and you run the risk of having reduced layer adhesion.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is annealing?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou can find out more about annealing\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/us.polymaker.com\/blogs\/3d-printing-tips\/what-is-annealing-and-why-do-we-do-it\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill the spools work in an AMS?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhile the spools will roll fine in the AMS, PPS-CF is very brittle on the spool meaning that if it goes through too tight of twists or turns - it may snap. We recommend not using an AMS and having a direct path to the printer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan you offer 1KG Fiberon™ Spool Options?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUnfortunately we are not offering 1KG Fiberon™ options and this has to do with the increased chance of carbon fiber and glass fiber filament snapping on the spool.\u003c\/p\u003e\n\u003cp\u003eSince carbon fiber and glass fiber filament is more brittle, we spool these with a larger core. This larger core means that 1KG of filament will not fit on a 1KG spool.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}

{"id":8896013369580,"title":"Polymaker Fiberon PA6-CF20 1.75mm 500g","handle":"polymaker-fiberonpa6-cf20-1-75mm-500g","description":"\u003cp\u003e\u003cspan\u003eFiberon™ PA6-CF20 is a carbon fiber reinforced PA6 (Nylon 6) filament. The carbon fiber reinforcement provides significantly improved stiffness, strength and heat resistance with outstanding layer adhesion.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFiberon™ PA6-CF20 is the same great formula as PolyMide PA6-CF, although Fiberon™ PA6-CF20 may print in a slightly darker black shade color than its predecessor.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"product-details__block product-details__text rte\"\u003e\n\u003ch5\u003ePrinting Requirements\u003c\/h5\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cul\u003e\n\u003cli\u003eAll-metal hotend 280˚C+\u003c\/li\u003e\n\u003cli\u003eHardened nozzle\u003c\/li\u003e\n\u003cli\u003eFilament dryer\u003c\/li\u003e\n\u003cli\u003eAnnealing post printing\u003c\/li\u003e\n\u003cli\u003eMoisture conditioning after Annealing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-details__block product-details__text rte\"\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Statement_On_Compliance_With_REACH_1.6_1_de0eeee1-3a63-4fd7-ab3c-236531d22a2e.pdf?v=1731430181\" target=\"_blank\"\u003eREACH\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Statement_On_Compliance_With_RoHS_1.4.pdf?v=1711471841\" target=\"_blank\"\u003eRoHS\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/889_Signed_and_Dated_1.pdf?v=1732549285\" target=\"_blank\"\u003e889\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Profile_Creation_Process_V0.6_1.pdf?v=1731430421\" target=\"_blank\"\u003ePCP\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Polymaker_ISO9001_2024.pdf?v=1731430331\" target=\"_blank\"\u003eISO9001 CERT\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003ePrint settings\u003c\/h5\u003e\n\u003cp\u003ePrinting Temperature: 280˚C - 300˚C\u003cbr\u003eBuild Plate Temperature: 40˚C - 50˚C\u003cbr\u003eChamber Temperature: Room Temperature\u003cbr\u003ePrinting Speed: up to 300mm\/s\u003cbr\u003eCooling Fan: OFF\u003cbr\u003e\u003cbr\u003eDirect Drive:\u003cbr\u003eRetraction Distance: 3mm\u003cbr\u003eRetraction Speed: 40mm\/s\u003cbr\u003eIndirect Drive:\u003cbr\u003eRetraction Distance: 6mm\u003cbr\u003eRetraction Speed: 60mm\/s\u003cbr\u003e\u003cbr\u003eRecommended Drying Settings:\u003cbr\u003eRegular Oven: 100˚C for 10h\u003cbr\u003ePolyDryer: Level 3 for 18h (\u003ca href=\"\/fr\/collections\/fdm-3d-printer-add-ons\/products\/polymaker-polydryer\" target=\"_blank\"\u003ePolyDryer™\u003c\/a\u003e)\u003cbr\u003e(Only if the material has absorbed moisture)\u003cbr\u003e\u003cbr\u003eAnnealing Settings: 100˚C for 16h\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrinter Profiles:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Bambu-Lab_X1C_Bambu-Studio_0.4_Fiberon-PA6-CF.zip\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Qidi_Q1Pro_OrcaSlicer_0.4_Fiberon-PA6-CF20.zip\" target=\"_blank\"\u003eQIDI Tech\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Raise-3D_E2CF_ideaMaker_0.4_Fiberon-PA6-CF20.zip\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCan't find your profile? Join our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/discord.polymaker.com\/\" target=\"_blank\"\u003eDiscord\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003eand see if the community has made one already!\u003c\/p\u003e\n\u003ch5\u003eFAQ\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is annealing?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou can find out more about annealing\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/us.polymaker.com\/blogs\/3d-printing-tips\/what-is-annealing-and-why-do-we-do-it\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is moisture conditioning?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMoisture conditioning refers to allowing the print to absorb moisture. This is inevitble since nylons are hygroscopic, but you can expedite the process by keeping the print in a high humidity climate, or submerging them in water, for 48 hours. All of our test specimens were annealed at 100˚C for 16 hours, and then immerged in water at 60˚C for 48 hours. The average moisture content of specimens is 2.57%.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I anneal before or after moisture conditioning?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen you anneal in a convection oven, you will dry the part out. So if you moisture condition before annealing - you will need to moisture condition again after. So we would suggest to moisture condition after annealing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy do you use such a low build plate temperature with your nylons?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur nylons come with our Warp-Free™ Technology. In order for this Warp-Free™ technology to work as it should - we want to make sure the build plate and the ambient air temperatures are both below 50˚C. We then anneal the print after to get it's full strength.\u003c\/p\u003e\n\u003cp\u003eLearn more\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/us.polymaker.com\/blogs\/finding-the-right-filament\/polymakers-technologies\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill the spools work in an AMS?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes! We have redesigned the edges of our spools so all Polymaker products will now spin great in the AMS.\u003c\/p\u003e\n\u003cp\u003eThat said - you will need to be careful when using any abrasive materials in the AMS.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan you offer 1KG Fiberon™ Spool Options?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUnfortunately we are not offering 1KG Fiberon™ options and this has to do with the increased chance of carbon fiber and glass fiber filament snapping on the spool.\u003c\/p\u003e\n\u003cp\u003eSince carbon fiber and glass fiber filament is more brittle, we spool these with a larger core. This larger core means that 1KG of filament will not fit on a 1KG spool.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2025-05-07T10:36:30-04:00","created_at":"2025-05-07T09:48:37-04:00","vendor":"Polymaker","type":"Polymaker 1.75mm filaments","tags":["1.75mm","carbon fiber","Filaments","PA6"],"price":5699,"price_min":5699,"price_max":5699,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":46422498509036,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PMK-FBR-PA6-CF20-500","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Polymaker Fiberon PA6-CF20 1.75mm 500g","public_title":null,"options":["Default Title"],"price":5699,"weight":850,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6938936714613","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/Polymaker_Fiberon_PA6-CF20_1.75mm_500g_Product_Picture.webp?v=1746629397"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Polymaker_Fiberon_PA6-CF20_1.75mm_500g_Product_Picture.webp?v=1746629397","options":["Title"],"media":[{"alt":"Polymaker Fiberon PA6-CF20 1.75mm 500g Product Picture","id":35331352068332,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Polymaker_Fiberon_PA6-CF20_1.75mm_500g_Product_Picture.webp?v=1746629397"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Polymaker_Fiberon_PA6-CF20_1.75mm_500g_Product_Picture.webp?v=1746629397","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003eFiberon™ PA6-CF20 is a carbon fiber reinforced PA6 (Nylon 6) filament. The carbon fiber reinforcement provides significantly improved stiffness, strength and heat resistance with outstanding layer adhesion.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFiberon™ PA6-CF20 is the same great formula as PolyMide PA6-CF, although Fiberon™ PA6-CF20 may print in a slightly darker black shade color than its predecessor.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"product-details__block product-details__text rte\"\u003e\n\u003ch5\u003ePrinting Requirements\u003c\/h5\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cul\u003e\n\u003cli\u003eAll-metal hotend 280˚C+\u003c\/li\u003e\n\u003cli\u003eHardened nozzle\u003c\/li\u003e\n\u003cli\u003eFilament dryer\u003c\/li\u003e\n\u003cli\u003eAnnealing post printing\u003c\/li\u003e\n\u003cli\u003eMoisture conditioning after Annealing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-details__block product-details__text rte\"\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Statement_On_Compliance_With_REACH_1.6_1_de0eeee1-3a63-4fd7-ab3c-236531d22a2e.pdf?v=1731430181\" target=\"_blank\"\u003eREACH\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Statement_On_Compliance_With_RoHS_1.4.pdf?v=1711471841\" target=\"_blank\"\u003eRoHS\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/889_Signed_and_Dated_1.pdf?v=1732549285\" target=\"_blank\"\u003e889\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Profile_Creation_Process_V0.6_1.pdf?v=1731430421\" target=\"_blank\"\u003ePCP\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e|\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/7299\/7945\/files\/Polymaker_ISO9001_2024.pdf?v=1731430331\" target=\"_blank\"\u003eISO9001 CERT\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003ePrint settings\u003c\/h5\u003e\n\u003cp\u003ePrinting Temperature: 280˚C - 300˚C\u003cbr\u003eBuild Plate Temperature: 40˚C - 50˚C\u003cbr\u003eChamber Temperature: Room Temperature\u003cbr\u003ePrinting Speed: up to 300mm\/s\u003cbr\u003eCooling Fan: OFF\u003cbr\u003e\u003cbr\u003eDirect Drive:\u003cbr\u003eRetraction Distance: 3mm\u003cbr\u003eRetraction Speed: 40mm\/s\u003cbr\u003eIndirect Drive:\u003cbr\u003eRetraction Distance: 6mm\u003cbr\u003eRetraction Speed: 60mm\/s\u003cbr\u003e\u003cbr\u003eRecommended Drying Settings:\u003cbr\u003eRegular Oven: 100˚C for 10h\u003cbr\u003ePolyDryer: Level 3 for 18h (\u003ca href=\"\/fr\/collections\/fdm-3d-printer-add-ons\/products\/polymaker-polydryer\" target=\"_blank\"\u003ePolyDryer™\u003c\/a\u003e)\u003cbr\u003e(Only if the material has absorbed moisture)\u003cbr\u003e\u003cbr\u003eAnnealing Settings: 100˚C for 16h\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrinter Profiles:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Bambu-Lab_X1C_Bambu-Studio_0.4_Fiberon-PA6-CF.zip\" target=\"_blank\"\u003eBambu Lab\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Qidi_Q1Pro_OrcaSlicer_0.4_Fiberon-PA6-CF20.zip\" target=\"_blank\"\u003eQIDI Tech\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/fiberon.polymaker.com\/wp-content\/uploads\/Raise-3D_E2CF_ideaMaker_0.4_Fiberon-PA6-CF20.zip\" target=\"_blank\"\u003eRaise3D\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eCan't find your profile? Join our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/discord.polymaker.com\/\" target=\"_blank\"\u003eDiscord\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003eand see if the community has made one already!\u003c\/p\u003e\n\u003ch5\u003eFAQ\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is annealing?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou can find out more about annealing\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/us.polymaker.com\/blogs\/3d-printing-tips\/what-is-annealing-and-why-do-we-do-it\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is moisture conditioning?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMoisture conditioning refers to allowing the print to absorb moisture. This is inevitble since nylons are hygroscopic, but you can expedite the process by keeping the print in a high humidity climate, or submerging them in water, for 48 hours. All of our test specimens were annealed at 100˚C for 16 hours, and then immerged in water at 60˚C for 48 hours. The average moisture content of specimens is 2.57%.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I anneal before or after moisture conditioning?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen you anneal in a convection oven, you will dry the part out. So if you moisture condition before annealing - you will need to moisture condition again after. So we would suggest to moisture condition after annealing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy do you use such a low build plate temperature with your nylons?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur nylons come with our Warp-Free™ Technology. In order for this Warp-Free™ technology to work as it should - we want to make sure the build plate and the ambient air temperatures are both below 50˚C. We then anneal the print after to get it's full strength.\u003c\/p\u003e\n\u003cp\u003eLearn more\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/us.polymaker.com\/blogs\/finding-the-right-filament\/polymakers-technologies\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill the spools work in an AMS?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes! We have redesigned the edges of our spools so all Polymaker products will now spin great in the AMS.\u003c\/p\u003e\n\u003cp\u003eThat said - you will need to be careful when using any abrasive materials in the AMS.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan you offer 1KG Fiberon™ Spool Options?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUnfortunately we are not offering 1KG Fiberon™ options and this has to do with the increased chance of carbon fiber and glass fiber filament snapping on the spool.\u003c\/p\u003e\n\u003cp\u003eSince carbon fiber and glass fiber filament is more brittle, we spool these with a larger core. This larger core means that 1KG of filament will not fit on a 1KG spool.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}

{"id":8891448623340,"title":"Formlabs Form Cure (2nd Generation)","handle":"formlabs-form-cure-2nd-generation","description":"\u003cdiv align=\"justify\"\u003e\n\u003cp\u003eForm Cure (2nd Generation) precisely combines heat and 405 nm light to deliver tough, strong prints with unprecedented speed and consistency. Now you can post-cure Form 4\/B prints in as little as 60 seconds, with 4x more UV power, 5x faster heat-up times, and a 1.3x larger chamber. To begin curing, just select a validated preset for Formlabs 45+ materials. Advanced users can customize time and temperature to fit their specific needs.\u003c\/p\u003e\n\u003cp\u003ePost-curing completes the chemical reaction started during printing, enhancing final part strength, toughness, heat resistance, and creep resistance while creating a harder, less tacky surface.\u003c\/p\u003e\n\u003cp\u003eFor biocompatible materials, post-curing is necessary to achieve the safety standards determined by regulatory agencies.\u003c\/p\u003e\n\u003cp\u003eCure Most Parts in 60 Seconds\u003cbr\u003eRapid UV curing and instant heat up for consistent, validated results and effortless post-curing of large Form 4 prints.\u003c\/p\u003e\n\u003cp\u003eBlazing Fast Curing, Nearly Instant Heat Up Time\u003cbr\u003ePost-cure general purpose resins in just 60 seconds or cure engineering resins in less than 15 minutes with just 60 seconds required to heat to 60 °C (230 V version).\u003c\/p\u003e\n\u003cp\u003eConsistent, Validated Results\u003cbr\u003e48 LED array and convective heating system ensure uniform UV and heat exposure, delivering 14.5 mW\/cm² irradiance and a maximum temperature of 100 °C.\u003c\/p\u003e\n\u003cp\u003ePost-Cure Large Form 4 Prints\u003cbr\u003eDesigned to fit any part on the Form 4, enabling curing of parts up to 200 x 125 x 245 mm on a 235 mm turntable.\u003c\/p\u003e\n\u003cp\u003eEasier than Ever\u003cbr\u003eSleek new design with pre-programmed cure cycles, an easily cleaned glass turntable, and side-hinged door to allow easy access within a compact footprint.\u003c\/p\u003e\n\u003cp\u003eBlazing Fast Curing\u003cbr\u003eForm Cure (2nd Generation) is engineered to deliver rapid, consistent, and high-quality post-curing results.\u003c\/p\u003e\n\u003cp\u003eNear instant heat-up:\u003c\/p\u003e\n\u003cp\u003e60 °C in 60 seconds\u003cbr\u003e80 °C in 150 seconds\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eFast curing:\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eGeneral Purpose Resins in 60 seconds\u003cbr\u003eEngineering \u0026amp; Biocompatible Resins in 3-15 minutes\u003c\/p\u003e\n\u003cp\u003ePrecise and Consistent Results\u003cbr\u003eReach temperatures up to: 100 °C\u003cbr\u003eUniform irradiance of 14.5 mW\/cm2\u003c\/p\u003e\n\u003cp\u003eFit Large Form 4 Parts\u003cbr\u003e235 mm rotating turntable\u003cbr\u003e245 mm maximum part height\u003c\/p\u003e\n\u003cp\u003eForm 4 Workflow in Minutes\u003cbr\u003eForm Cure is a part of a 3D printing ecosystem that’s easy to learn and use and requires little intervention or maintenance. Watch the video to learn the basics of how to use Form 4, from the software and materials to printing and post-processing.\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2025-04-29T15:40:13-04:00","created_at":"2025-04-29T15:09:25-04:00","vendor":"Formlabs","type":"Formlabs 3D Printers","tags":["cure","Form 4","formlabs","resin","sla"],"price":142857,"price_min":142857,"price_max":142857,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":46406567723244,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"FLB-CUR-002-000-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Formlabs Form Cure (2nd Generation)","public_title":null,"options":["Default Title"],"price":142857,"weight":8000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Form_Cure_Second_Gen_Main_Product_Picture.webp?v=1745954986","\/\/www.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Form_Cure_Second_Gen_Second_Product_Picture.webp?v=1745954986","\/\/www.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Form_Cure_Second_Gen_Open_Door_Product_Picture.webp?v=1745954990","\/\/www.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Form_Cure_Second_Gen_With_Decor_Product_Picture.webp?v=1745954990"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Form_Cure_Second_Gen_Main_Product_Picture.webp?v=1745954986","options":["Title"],"media":[{"alt":null,"id":35305735979244,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Form_Cure_Second_Gen_Main_Product_Picture.webp?v=1745954986"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Form_Cure_Second_Gen_Main_Product_Picture.webp?v=1745954986","width":1400},{"alt":null,"id":35305736012012,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Form_Cure_Second_Gen_Second_Product_Picture.webp?v=1745954986"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Form_Cure_Second_Gen_Second_Product_Picture.webp?v=1745954986","width":1400},{"alt":null,"id":35305736077548,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Form_Cure_Second_Gen_Open_Door_Product_Picture.webp?v=1745954990"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Form_Cure_Second_Gen_Open_Door_Product_Picture.webp?v=1745954990","width":1400},{"alt":null,"id":35305736044780,"position":4,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Form_Cure_Second_Gen_With_Decor_Product_Picture.webp?v=1745954990"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Form_Cure_Second_Gen_With_Decor_Product_Picture.webp?v=1745954990","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv align=\"justify\"\u003e\n\u003cp\u003eForm Cure (2nd Generation) precisely combines heat and 405 nm light to deliver tough, strong prints with unprecedented speed and consistency. Now you can post-cure Form 4\/B prints in as little as 60 seconds, with 4x more UV power, 5x faster heat-up times, and a 1.3x larger chamber. To begin curing, just select a validated preset for Formlabs 45+ materials. Advanced users can customize time and temperature to fit their specific needs.\u003c\/p\u003e\n\u003cp\u003ePost-curing completes the chemical reaction started during printing, enhancing final part strength, toughness, heat resistance, and creep resistance while creating a harder, less tacky surface.\u003c\/p\u003e\n\u003cp\u003eFor biocompatible materials, post-curing is necessary to achieve the safety standards determined by regulatory agencies.\u003c\/p\u003e\n\u003cp\u003eCure Most Parts in 60 Seconds\u003cbr\u003eRapid UV curing and instant heat up for consistent, validated results and effortless post-curing of large Form 4 prints.\u003c\/p\u003e\n\u003cp\u003eBlazing Fast Curing, Nearly Instant Heat Up Time\u003cbr\u003ePost-cure general purpose resins in just 60 seconds or cure engineering resins in less than 15 minutes with just 60 seconds required to heat to 60 °C (230 V version).\u003c\/p\u003e\n\u003cp\u003eConsistent, Validated Results\u003cbr\u003e48 LED array and convective heating system ensure uniform UV and heat exposure, delivering 14.5 mW\/cm² irradiance and a maximum temperature of 100 °C.\u003c\/p\u003e\n\u003cp\u003ePost-Cure Large Form 4 Prints\u003cbr\u003eDesigned to fit any part on the Form 4, enabling curing of parts up to 200 x 125 x 245 mm on a 235 mm turntable.\u003c\/p\u003e\n\u003cp\u003eEasier than Ever\u003cbr\u003eSleek new design with pre-programmed cure cycles, an easily cleaned glass turntable, and side-hinged door to allow easy access within a compact footprint.\u003c\/p\u003e\n\u003cp\u003eBlazing Fast Curing\u003cbr\u003eForm Cure (2nd Generation) is engineered to deliver rapid, consistent, and high-quality post-curing results.\u003c\/p\u003e\n\u003cp\u003eNear instant heat-up:\u003c\/p\u003e\n\u003cp\u003e60 °C in 60 seconds\u003cbr\u003e80 °C in 150 seconds\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eFast curing:\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eGeneral Purpose Resins in 60 seconds\u003cbr\u003eEngineering \u0026amp; Biocompatible Resins in 3-15 minutes\u003c\/p\u003e\n\u003cp\u003ePrecise and Consistent Results\u003cbr\u003eReach temperatures up to: 100 °C\u003cbr\u003eUniform irradiance of 14.5 mW\/cm2\u003c\/p\u003e\n\u003cp\u003eFit Large Form 4 Parts\u003cbr\u003e235 mm rotating turntable\u003cbr\u003e245 mm maximum part height\u003c\/p\u003e\n\u003cp\u003eForm 4 Workflow in Minutes\u003cbr\u003eForm Cure is a part of a 3D printing ecosystem that’s easy to learn and use and requires little intervention or maintenance. Watch the video to learn the basics of how to use Form 4, from the software and materials to printing and post-processing.\u003c\/p\u003e\n\u003c\/div\u003e"}

{"id":8887348003052,"title":"Form 2 \u0026 3 Dental LT Clear Resin V2 1L","handle":"form-2-3-dental-lt-clear-resin-1l","description":"\u003cp\u003eDental LT Clear Resin V2 is a long-term biocompatible material for directly printing affordable, high-quality hard splints and occlusal guards in-house. Highly durable and resistant to fracture, this color-corrected material prints clear, polishes to high optical transparency, and resists discoloration over time.\u003c\/p\u003e\n\u003cp\u003eRead our Application Guide to learn the complete workflow and best practices for making 3D printed splints and night guards on your Formlabs 3D printer.\u003c\/p\u003e\n\u003cp\u003eWhy Choose Dental LT Clear Resin (V2)?\u003cbr\u003eDental LT Clear Resin (V2) provides dental professionals with a durable, color-corrected material for the convenient production of long-lasting and hard occlusal splints.\u003c\/p\u003e\n\u003cp\u003eHigh Performance\u003cbr\u003eProvide fracture-resistant, durable and long-lasting bite splints to patients.\u003c\/p\u003e\n\u003cp\u003eAesthetic\u003cbr\u003ePolish splints to high optical transparency, aiding in patient acceptance.\u003c\/p\u003e\n\u003cp\u003eAccurate and Consistent\u003cbr\u003eRun a lean and profitable workflow with consistent production of aligners.\u003c\/p\u003e\n\u003cp\u003eBiocompatibility\u003cbr\u003eProvide the patient and clinician the peace of mind they deserve.\u003c\/p\u003e\n\u003cp\u003eApplications\u003cbr\u003eDental LT Clear Resin (V2) is Formlabs’ second-generation, long-term biocompatible material for clear bite splints.\u003c\/p\u003e\n\u003cp\u003eApplications\u003cbr\u003eDental LT Clear Resin (V2) is Formlabs’ second-generation, long-term biocompatible material for clear bite splints.\u003c\/p\u003e\n\u003cp\u003eConsider Dental LT Clear Resin (V2) for:\u003c\/p\u003e\n\u003cp\u003eSplints\u003cbr\u003eOcclusal Guards\u003cbr\u003eNight Guards\u003c\/p\u003e\n\u003cp\u003eMaterial Properties* Dental LT Clear Resin (V2)\u003c\/p\u003e\n\u003cp\u003eUltimate Tensile Strength: 52 MPa\u003cbr\u003eTensile Modulus: 2080 MPa\u003cbr\u003eElongation: 12%\u003cbr\u003eFlexural Modulus: 2.3 GPa\u003cbr\u003eImpact Strength (Unnotched IZOD): 449 J\/m\u003cbr\u003eHardness Shore D: 78D\u003c\/p\u003e\n\u003cp\u003e* Material properties may vary based on part geometry, print orientation, print settings, and temperature. Data were measured on post-cured samples printed on a Form 3B printer with 100 µm Dental LT Clear Resin (V2) settings, washed in a Form Wash for 20 minutes in 99% Isopropyl Alcohol, and post-cured at 60°C for 60 minutes in a Form Cure.\u003c\/p\u003e","published_at":"2025-04-23T16:25:22-04:00","created_at":"2025-04-23T16:13:52-04:00","vendor":"Formlabs","type":"Résines Formlabs","tags":["dental","Dental LT Clear","Form 2 \u0026 3","formlabs","resin"],"price":49907,"price_min":49907,"price_max":49907,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":46393945227500,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"FLB-F23-DCR-V02-01L","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Form 2 \u0026 3 Dental LT Clear Resin V2 1L","public_title":null,"options":["Default Title"],"price":49907,"weight":1500,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"811294031188","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/Formlabs_dental_lt_clear_v2_Resin_For_Form2_And_Form3_Product_Picture.webp?v=1745439624"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Formlabs_dental_lt_clear_v2_Resin_For_Form2_And_Form3_Product_Picture.webp?v=1745439624","options":["Title"],"media":[{"alt":null,"id":35282696241388,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Formlabs_dental_lt_clear_v2_Resin_For_Form2_And_Form3_Product_Picture.webp?v=1745439624"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Formlabs_dental_lt_clear_v2_Resin_For_Form2_And_Form3_Product_Picture.webp?v=1745439624","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eDental LT Clear Resin V2 is a long-term biocompatible material for directly printing affordable, high-quality hard splints and occlusal guards in-house. Highly durable and resistant to fracture, this color-corrected material prints clear, polishes to high optical transparency, and resists discoloration over time.\u003c\/p\u003e\n\u003cp\u003eRead our Application Guide to learn the complete workflow and best practices for making 3D printed splints and night guards on your Formlabs 3D printer.\u003c\/p\u003e\n\u003cp\u003eWhy Choose Dental LT Clear Resin (V2)?\u003cbr\u003eDental LT Clear Resin (V2) provides dental professionals with a durable, color-corrected material for the convenient production of long-lasting and hard occlusal splints.\u003c\/p\u003e\n\u003cp\u003eHigh Performance\u003cbr\u003eProvide fracture-resistant, durable and long-lasting bite splints to patients.\u003c\/p\u003e\n\u003cp\u003eAesthetic\u003cbr\u003ePolish splints to high optical transparency, aiding in patient acceptance.\u003c\/p\u003e\n\u003cp\u003eAccurate and Consistent\u003cbr\u003eRun a lean and profitable workflow with consistent production of aligners.\u003c\/p\u003e\n\u003cp\u003eBiocompatibility\u003cbr\u003eProvide the patient and clinician the peace of mind they deserve.\u003c\/p\u003e\n\u003cp\u003eApplications\u003cbr\u003eDental LT Clear Resin (V2) is Formlabs’ second-generation, long-term biocompatible material for clear bite splints.\u003c\/p\u003e\n\u003cp\u003eApplications\u003cbr\u003eDental LT Clear Resin (V2) is Formlabs’ second-generation, long-term biocompatible material for clear bite splints.\u003c\/p\u003e\n\u003cp\u003eConsider Dental LT Clear Resin (V2) for:\u003c\/p\u003e\n\u003cp\u003eSplints\u003cbr\u003eOcclusal Guards\u003cbr\u003eNight Guards\u003c\/p\u003e\n\u003cp\u003eMaterial Properties* Dental LT Clear Resin (V2)\u003c\/p\u003e\n\u003cp\u003eUltimate Tensile Strength: 52 MPa\u003cbr\u003eTensile Modulus: 2080 MPa\u003cbr\u003eElongation: 12%\u003cbr\u003eFlexural Modulus: 2.3 GPa\u003cbr\u003eImpact Strength (Unnotched IZOD): 449 J\/m\u003cbr\u003eHardness Shore D: 78D\u003c\/p\u003e\n\u003cp\u003e* Material properties may vary based on part geometry, print orientation, print settings, and temperature. Data were measured on post-cured samples printed on a Form 3B printer with 100 µm Dental LT Clear Resin (V2) settings, washed in a Form Wash for 20 minutes in 99% Isopropyl Alcohol, and post-cured at 60°C for 60 minutes in a Form Cure.\u003c\/p\u003e"}

{"id":8887338926316,"title":"Form 2 \u0026 3 Denture Base OP Resin 1L","handle":"form-2-3-denture-base-op-resin-1l","description":"\u003cp\u003eDenture Base Resin is a biocompatible material for producing long-lasting, wear-resistant denture bases and try-in dentures at a fraction of the cost of traditional methods. With four semi-translucent shades available, technicians can achieve lifelike gingiva with natural margins, whether with 3D printed denture teeth or acrylic cards.\u003c\/p\u003e\n\u003cp\u003eRead our Application Guide to learn the complete digital workflow and best practices for making 3D printed dentures on your Formlabs 3D printer.\u003c\/p\u003e\n\u003cp\u003eWhy Choose Denture Base Resin?\u003cbr\u003eDenture Base Resin enables dental professionals to produce 3D printed dentures accurately and reliably.\u003c\/p\u003e\n\u003cp\u003eSemi-Translucent, Pink Base Shades\u003cbr\u003eProvide lifelike gingiva with natural margins.\u003c\/p\u003e\n\u003cp\u003eStrong and Wear-Resistant\u003cbr\u003eProduce long-lasting dentures that won't break or wear down easily.\u003c\/p\u003e\n\u003cp\u003eRepeatable and reliable\u003cbr\u003eReach an end result in fewer steps, start to finish, than traditional workflows.\u003c\/p\u003e\n\u003cp\u003eBiocompatibility\u003cbr\u003eProvide the patient and clinician the peace of mind they deserve.\u003c\/p\u003e\n\u003cp\u003eApplications\u003cbr\u003eDenture Base Resin is expanding access to digital dentures with an efficient, cost-effective manufacturing solution.\u003c\/p\u003e\n\u003cp\u003eConsider Denture Base Resin for:\u003c\/p\u003e\n\u003cp\u003eFinal Dentures\u003cbr\u003eTry-in Dentures\u003c\/p\u003e\n\u003cp\u003eMaterial Properties* Denture Base Resin\u003c\/p\u003e\n\u003cp\u003eFlexural Strength: \u0026gt; 50 MPa\u003cbr\u003eDensity: 1.15 g\/cm 3 \u0026lt; X \u0026lt;1.25 g\/cm3\u003c\/p\u003e","published_at":"2025-04-23T16:11:01-04:00","created_at":"2025-04-23T15:51:25-04:00","vendor":"Formlabs","type":"Résines Formlabs","tags":["dental","Denture Base OP","Form 2 \u0026 3","formlabs","resin"],"price":42757,"price_min":42757,"price_max":42757,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":46393924092140,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"FLB-DNT-BSE-0OP-01L","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Form 2 \u0026 3 Denture Base OP Resin 1L","public_title":null,"options":["Default Title"],"price":42757,"weight":1500,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"811294030556","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Denture_Base_OP_Resin_For_Form3_Product_Picture.webp?v=1745438592"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Denture_Base_OP_Resin_For_Form3_Product_Picture.webp?v=1745438592","options":["Title"],"media":[{"alt":null,"id":35282675892460,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Denture_Base_OP_Resin_For_Form3_Product_Picture.webp?v=1745438592"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Denture_Base_OP_Resin_For_Form3_Product_Picture.webp?v=1745438592","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eDenture Base Resin is a biocompatible material for producing long-lasting, wear-resistant denture bases and try-in dentures at a fraction of the cost of traditional methods. With four semi-translucent shades available, technicians can achieve lifelike gingiva with natural margins, whether with 3D printed denture teeth or acrylic cards.\u003c\/p\u003e\n\u003cp\u003eRead our Application Guide to learn the complete digital workflow and best practices for making 3D printed dentures on your Formlabs 3D printer.\u003c\/p\u003e\n\u003cp\u003eWhy Choose Denture Base Resin?\u003cbr\u003eDenture Base Resin enables dental professionals to produce 3D printed dentures accurately and reliably.\u003c\/p\u003e\n\u003cp\u003eSemi-Translucent, Pink Base Shades\u003cbr\u003eProvide lifelike gingiva with natural margins.\u003c\/p\u003e\n\u003cp\u003eStrong and Wear-Resistant\u003cbr\u003eProduce long-lasting dentures that won't break or wear down easily.\u003c\/p\u003e\n\u003cp\u003eRepeatable and reliable\u003cbr\u003eReach an end result in fewer steps, start to finish, than traditional workflows.\u003c\/p\u003e\n\u003cp\u003eBiocompatibility\u003cbr\u003eProvide the patient and clinician the peace of mind they deserve.\u003c\/p\u003e\n\u003cp\u003eApplications\u003cbr\u003eDenture Base Resin is expanding access to digital dentures with an efficient, cost-effective manufacturing solution.\u003c\/p\u003e\n\u003cp\u003eConsider Denture Base Resin for:\u003c\/p\u003e\n\u003cp\u003eFinal Dentures\u003cbr\u003eTry-in Dentures\u003c\/p\u003e\n\u003cp\u003eMaterial Properties* Denture Base Resin\u003c\/p\u003e\n\u003cp\u003eFlexural Strength: \u0026gt; 50 MPa\u003cbr\u003eDensity: 1.15 g\/cm 3 \u0026lt; X \u0026lt;1.25 g\/cm3\u003c\/p\u003e"}

{"id":8887313432812,"title":"Surgical Guide Resin (Form 4B) 1L","handle":"surgical-guide-resin-form-4b-1l","description":"\u003cp\u003eSurgical Guide Resin is an autoclavable, biocompatible resin for 3D printing surgical guides, drilling templates, pilot drill guides, and device sizing templates that exceed dental demands in accuracy, part quality, and performance. Surgical Guide Resin was formulated specifically for Formlabs printers and rigorously tested to meet solvent disinfection and autoclave sterilization standards for implant systems.\u003c\/p\u003e\n\u003cp\u003eRead our Application Guide to learn the complete digital workflow and best practices for making 3D printed surgical guides on your Formlabs 3D printer.\u003c\/p\u003e\n\u003cp\u003eWhy Choose Surgical Guide Resin?\u003cbr\u003eSurgical Guide Resin provides dental professionals with a biocompatible material for the production of dimensionally accurate dental implant guides and templates.\u003c\/p\u003e\n\u003cp\u003eReliable\u003cbr\u003eConsistency produce reliable guides.\u003c\/p\u003e\n\u003cp\u003eEfficient\u003cbr\u003eLeverage a digital workflow from intraoral scanning to production.\u003c\/p\u003e\n\u003cp\u003eBiocompatibility\u003cbr\u003eProvide the patient and clinician the peace of mind they deserve.\u003c\/p\u003e\n\u003cp\u003eApplications\u003cbr\u003eSurgical Guide Resin is a premium-quality material for printing surgical implant guides.\u003c\/p\u003e\n\u003cp\u003eConsider Surgical Guide Resin for:\u003c\/p\u003e\n\u003cp\u003eSplints\u003cbr\u003eOcclusal Guards\u003cbr\u003eDevice Sizing Templates\u003cbr\u003eDrilling Templates\u003c\/p\u003e\n\u003cp\u003eMaterial Properties* Surgical Guide Resin\u003c\/p\u003e\n\u003cp\u003eElongation: 12%\u003cbr\u003eFlexural Strength: \u0026gt; 102 MPa\u003cbr\u003eFlexural Modulus: \u0026gt; 2400 MPa\u003c\/p\u003e\n\u003cp\u003e* Material properties may vary based on part geometry, print orientation, print settings, and temperature. Data for post-cured samples were measured on Type IV tensile bars printed on a Form 2 printer with 100 μm Surgical Guide Resin settings, washed in a Form Wash for 20 minutes in ≥99% Isopropyl Alcohol, and post-cured at 60°C for 30 minutes in a Form Cure\u003c\/p\u003e","published_at":"2025-04-23T15:39:10-04:00","created_at":"2025-04-23T15:26:58-04:00","vendor":"Formlabs","type":"Résines Formlabs","tags":["dental","Form 4B","formlabs","resin","Surgical Guide"],"price":35607,"price_min":35607,"price_max":35607,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":46393890603244,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"F4B-SRG-GUI-V01-01L","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Surgical Guide Resin (Form 4B) 1L","public_title":null,"options":["Default Title"],"price":35607,"weight":1500,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"811294035230","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Surgical_Guide_Resin_For_Form_4_Product_Picture.webp?v=1745437269"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Surgical_Guide_Resin_For_Form_4_Product_Picture.webp?v=1745437269","options":["Title"],"media":[{"alt":null,"id":35282637979884,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Surgical_Guide_Resin_For_Form_4_Product_Picture.webp?v=1745437269"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Formlabs_Surgical_Guide_Resin_For_Form_4_Product_Picture.webp?v=1745437269","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eSurgical Guide Resin is an autoclavable, biocompatible resin for 3D printing surgical guides, drilling templates, pilot drill guides, and device sizing templates that exceed dental demands in accuracy, part quality, and performance. Surgical Guide Resin was formulated specifically for Formlabs printers and rigorously tested to meet solvent disinfection and autoclave sterilization standards for implant systems.\u003c\/p\u003e\n\u003cp\u003eRead our Application Guide to learn the complete digital workflow and best practices for making 3D printed surgical guides on your Formlabs 3D printer.\u003c\/p\u003e\n\u003cp\u003eWhy Choose Surgical Guide Resin?\u003cbr\u003eSurgical Guide Resin provides dental professionals with a biocompatible material for the production of dimensionally accurate dental implant guides and templates.\u003c\/p\u003e\n\u003cp\u003eReliable\u003cbr\u003eConsistency produce reliable guides.\u003c\/p\u003e\n\u003cp\u003eEfficient\u003cbr\u003eLeverage a digital workflow from intraoral scanning to production.\u003c\/p\u003e\n\u003cp\u003eBiocompatibility\u003cbr\u003eProvide the patient and clinician the peace of mind they deserve.\u003c\/p\u003e\n\u003cp\u003eApplications\u003cbr\u003eSurgical Guide Resin is a premium-quality material for printing surgical implant guides.\u003c\/p\u003e\n\u003cp\u003eConsider Surgical Guide Resin for:\u003c\/p\u003e\n\u003cp\u003eSplints\u003cbr\u003eOcclusal Guards\u003cbr\u003eDevice Sizing Templates\u003cbr\u003eDrilling Templates\u003c\/p\u003e\n\u003cp\u003eMaterial Properties* Surgical Guide Resin\u003c\/p\u003e\n\u003cp\u003eElongation: 12%\u003cbr\u003eFlexural Strength: \u0026gt; 102 MPa\u003cbr\u003eFlexural Modulus: \u0026gt; 2400 MPa\u003c\/p\u003e\n\u003cp\u003e* Material properties may vary based on part geometry, print orientation, print settings, and temperature. Data for post-cured samples were measured on Type IV tensile bars printed on a Form 2 printer with 100 μm Surgical Guide Resin settings, washed in a Form Wash for 20 minutes in ≥99% Isopropyl Alcohol, and post-cured at 60°C for 30 minutes in a Form Cure\u003c\/p\u003e"}