{"id":9094475055340,"title":"HighTemp Powder-coated Print Sheet [HT90]","handle":"hightemp-powder-coated-print-sheet-ht90","description":"\u003cp\u003e\u003cspan\u003eThe HighTemp print sheet is intended for printing with special high-temperature materials, such as PEEK, PEEK-CF, PEI, PEKK, and PPSU, which may otherwise have poor (or too strong) adhesion on standard steel sheets. This sheet is compatible with Prusa Pro HT90.\u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eOVERVIEW:\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe Prusa Pro HT90 heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eUnlike the regular Textured (TXT) sheet, the HighTemp sheet is designed for printing with high-temperature materials. It offers good adhesion to materials like PEEK, PEEK-CF, PEI, PEKK, and PPSU, plus it resists multiple cycles at temperatures over 100 °C. However, this print sheet is not suitable for printing standard low-temperature materials, such as PLA and PETG.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eList of supported materials:\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003ePEEK, PEEK-CF, PEEK-GF\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003ePEI1010, PEI 9085, PEI-CF\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003ePEKK, PEKK-CF\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003ePES\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003ePPSU\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003ePSU\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThis print sheet has a very similar surface structure to the regular TXT sheet. This surface finish is made by powder coating on metal and leaves a nice, distinct textured look on your prints. The textured surface hides most of the mechanical damage caused by tools. Only the tops of the small bumps can be scratched, which will not imprint on the bottom of the model. This type of surface is used on the Prusa print farm. Look at the printed parts you have on your printer for reference.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFind more details about the spring steel sheets in the Prusa Online\u003cspan\u003e \u003c\/span\u003e\u003ca class=\"voxel-product-description-link\" href=\"https:\/\/help.prusa3d.com\/article\/ht90-hightemp-powder-coated-print-sheet_900274\" target=\"_blank\"\u003eHelp article.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eWARNING\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eNever clean the HighTemp print sheet with IPA, acetone, or any other alcohol-based solvents! Doing so will damage the surface. Learn more about printing on the HighTemp print sheet in the online Prusa Help article.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eATTRIBUTES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv style=\"display: flex; flex-direction: column; gap: 1em;\"\u003e\n\u003cdiv style=\"display: flex; gap: 1em; align-items: center;\"\u003e\n\u003csvg color=\"#5DAF0B\" data-prefix=\"fal\" data-icon=\"plus\" role=\"img\" viewbox=\"0 0 448 512\" aria-hidden=\"true\" style=\"width: 2em; height: auto;\"\u003e\u003cpath fill=\"currentColor\" d=\"M240 48c0-8.8-7.2-16-16-16s-16 7.2-16 16l0 192-192 0c-8.8 0-16 7.2-16 16s7.2 16 16 16l192 0 0 192c0 8.8 7.2 16 16 16s16-7.2 16-16l0-192 192 0c8.8 0 16-7.2 16-16s-7.2-16-16-16l-192 0 0-192z\" style=\"color:#5DAF0B;\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cp style=\"display: flex; align-items: center; max-inline-size: 55ch; width: 100%;\"\u003eSuitable for printing high-temperature materials\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; gap: 1em; align-items: center;\"\u003e\n\u003csvg color=\"#5DAF0B\" data-prefix=\"fal\" data-icon=\"plus\" role=\"img\" viewbox=\"0 0 448 512\" aria-hidden=\"true\" style=\"width: 2em; height: auto;\"\u003e\u003cpath fill=\"currentColor\" d=\"M240 48c0-8.8-7.2-16-16-16s-16 7.2-16 16l0 192-192 0c-8.8 0-16 7.2-16 16s7.2 16 16 16l192 0 0 192c0 8.8 7.2 16 16 16s16-7.2 16-16l0-192 192 0c8.8 0 16-7.2 16-16s-7.2-16-16-16l-192 0 0-192z\" style=\"color:#5DAF0B;\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cp style=\"display: flex; align-items: center; max-inline-size: 55ch; width: 100%;\"\u003eTransfers texture to prints\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; gap: 1em; align-items: center;\"\u003e\n\u003csvg color=\"#5DAF0B\" data-prefix=\"fal\" data-icon=\"plus\" role=\"img\" viewbox=\"0 0 448 512\" aria-hidden=\"true\" style=\"width: 2em; height: auto;\"\u003e\u003cpath fill=\"currentColor\" d=\"M240 48c0-8.8-7.2-16-16-16s-16 7.2-16 16l0 192-192 0c-8.8 0-16 7.2-16 16s7.2 16 16 16l192 0 0 192c0 8.8 7.2 16 16 16s16-7.2 16-16l0-192 192 0c8.8 0 16-7.2 16-16s-7.2-16-16-16l-192 0 0-192z\" style=\"color:#5DAF0B;\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cp style=\"display: flex; align-items: center; max-inline-size: 55ch; width: 100%;\"\u003eMore forgiving Live Adjust Z setting\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; gap: 1em; align-items: center;\"\u003e\n\u003csvg color=\"#5DAF0B\" data-prefix=\"fal\" data-icon=\"plus\" role=\"img\" viewbox=\"0 0 448 512\" aria-hidden=\"true\" style=\"width: 2em; height: auto;\"\u003e\u003cpath fill=\"currentColor\" d=\"M240 48c0-8.8-7.2-16-16-16s-16 7.2-16 16l0 192-192 0c-8.8 0-16 7.2-16 16s7.2 16 16 16l192 0 0 192c0 8.8 7.2 16 16 16s16-7.2 16-16l0-192 192 0c8.8 0 16-7.2 16-16s-7.2-16-16-16l-192 0 0-192z\" style=\"color:#5DAF0B;\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cp style=\"display: flex; align-items: center; max-inline-size: 55ch; width: 100%;\"\u003eCan be washed only with dish soap and water\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; gap: 1em; align-items: center;\"\u003e\n\u003csvg color=\"#CB2C2C\" data-prefix=\"fal\" data-icon=\"minus\" role=\"img\" viewbox=\"0 0 448 512\" aria-hidden=\"true\" style=\"width: 2em; height: auto;\"\u003e\u003cpath fill=\"currentColor\" d=\"M0 256c0-8.8 7.2-16 16-16l416 0c8.8 0 16 7.2 16 16s-7.2 16-16 16L16 272c-8.8 0-16-7.2-16-16z\" style=\"color:#CB2C2C;\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cp style=\"display: flex; align-items: center; max-inline-size: 55ch; width: 100%;\"\u003eRequires a separation layer (\u003ca class=\"voxel-product-description-link\" href=\"https:\/\/www.voxelfactory.com\/products\/magigoo-pro-ht\"\u003eMagigoo HT\u003c\/a\u003e)\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; gap: 1em; align-items: center;\"\u003e\n\u003csvg color=\"#CB2C2C\" data-prefix=\"fal\" data-icon=\"minus\" role=\"img\" viewbox=\"0 0 448 512\" aria-hidden=\"true\" style=\"width: 2em; height: auto;\"\u003e\u003cpath fill=\"currentColor\" d=\"M0 256c0-8.8 7.2-16 16-16l416 0c8.8 0 16 7.2 16 16s-7.2 16-16 16L16 272c-8.8 0-16-7.2-16-16z\" style=\"color:#CB2C2C;\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cp style=\"display: flex; align-items: center; max-inline-size: 55ch; width: 100%;\"\u003eUnsuitable for low-temperature materials, such as PLA and PETG\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; gap: 1em; align-items: center;\"\u003e\n\u003csvg color=\"#CB2C2C\" data-prefix=\"fal\" data-icon=\"minus\" role=\"img\" viewbox=\"0 0 448 512\" aria-hidden=\"true\" style=\"width: 2em; height: auto;\"\u003e\u003cpath fill=\"currentColor\" d=\"M0 256c0-8.8 7.2-16 16-16l416 0c8.8 0 16 7.2 16 16s-7.2 16-16 16L16 272c-8.8 0-16-7.2-16-16z\" style=\"color:#CB2C2C;\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cp style=\"display: flex; align-items: center; max-inline-size: 55ch; width: 100%;\"\u003eGets damaged when cleaned with alcohol-based solvents\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eNotes:\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eConsumable parts, such as print sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks, or other cosmetic damage, is also not covered by the warranty. This includes dots caused by probing during the mesh bed leveling process, visible purge line, and local surface damage caused by applying an insufficient amount of\u003cspan\u003e \u003c\/span\u003e\u003ca class=\"voxel-product-description-link\" href=\"https:\/\/www.voxelfactory.com\/products\/magigoo-pro-ht\"\u003eMagigoo HT\u003c\/a\u003e. Only defective sheets on arrival are covered by warranty.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv style=\"display: flex; gap: 0.5em;\"\u003e\n\u003cdiv style=\"display: flex; flex-direction: column;\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/local-damage.jpg?v=1764686982\" alt=\"Local damage\"\u003e\u003cspan\u003eLocal surface damage\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; flex-direction: column;\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/nozzle-scratches.jpg?v=1764686981\" alt=\"Nozzles scratches\"\u003e\u003cspan\u003eScratched surface\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; flex-direction: column;\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/nozzle-dots.jpg?v=1764686982\" alt=\"Nozzles dots\"\u003e\u003cspan\u003eVisible dots caused by probing\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2025-12-02T09:50:59-05:00","created_at":"2025-12-02T09:50:58-05:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":["HT90"],"price":19999,"price_min":19999,"price_max":19999,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47052012945644,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-SHT-HTP-HT90-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"HighTemp Powder-coated Print Sheet [HT90]","public_title":null,"options":["Default Title"],"price":19999,"weight":150,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/HighTemp_Powder_coated_Print_Sheet_HT90_Product_Picture.webp?v=1764684634"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/HighTemp_Powder_coated_Print_Sheet_HT90_Product_Picture.webp?v=1764684634","options":["Title"],"media":[{"alt":"HighTemp Powder coated Print Sheet [HT90]","id":36339142754540,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/HighTemp_Powder_coated_Print_Sheet_HT90_Product_Picture.webp?v=1764684634"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/HighTemp_Powder_coated_Print_Sheet_HT90_Product_Picture.webp?v=1764684634","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003eThe HighTemp print sheet is intended for printing with special high-temperature materials, such as PEEK, PEEK-CF, PEI, PEKK, and PPSU, which may otherwise have poor (or too strong) adhesion on standard steel sheets. This sheet is compatible with Prusa Pro HT90.\u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eOVERVIEW:\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe Prusa Pro HT90 heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eUnlike the regular Textured (TXT) sheet, the HighTemp sheet is designed for printing with high-temperature materials. It offers good adhesion to materials like PEEK, PEEK-CF, PEI, PEKK, and PPSU, plus it resists multiple cycles at temperatures over 100 °C. However, this print sheet is not suitable for printing standard low-temperature materials, such as PLA and PETG.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eList of supported materials:\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003ePEEK, PEEK-CF, PEEK-GF\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003ePEI1010, PEI 9085, PEI-CF\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003ePEKK, PEKK-CF\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003ePES\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003ePPSU\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003ePSU\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThis print sheet has a very similar surface structure to the regular TXT sheet. This surface finish is made by powder coating on metal and leaves a nice, distinct textured look on your prints. The textured surface hides most of the mechanical damage caused by tools. Only the tops of the small bumps can be scratched, which will not imprint on the bottom of the model. This type of surface is used on the Prusa print farm. Look at the printed parts you have on your printer for reference.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFind more details about the spring steel sheets in the Prusa Online\u003cspan\u003e \u003c\/span\u003e\u003ca class=\"voxel-product-description-link\" href=\"https:\/\/help.prusa3d.com\/article\/ht90-hightemp-powder-coated-print-sheet_900274\" target=\"_blank\"\u003eHelp article.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eWARNING\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eNever clean the HighTemp print sheet with IPA, acetone, or any other alcohol-based solvents! Doing so will damage the surface. Learn more about printing on the HighTemp print sheet in the online Prusa Help article.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eATTRIBUTES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv style=\"display: flex; flex-direction: column; gap: 1em;\"\u003e\n\u003cdiv style=\"display: flex; gap: 1em; align-items: center;\"\u003e\n\u003csvg color=\"#5DAF0B\" data-prefix=\"fal\" data-icon=\"plus\" role=\"img\" viewbox=\"0 0 448 512\" aria-hidden=\"true\" style=\"width: 2em; height: auto;\"\u003e\u003cpath fill=\"currentColor\" d=\"M240 48c0-8.8-7.2-16-16-16s-16 7.2-16 16l0 192-192 0c-8.8 0-16 7.2-16 16s7.2 16 16 16l192 0 0 192c0 8.8 7.2 16 16 16s16-7.2 16-16l0-192 192 0c8.8 0 16-7.2 16-16s-7.2-16-16-16l-192 0 0-192z\" style=\"color:#5DAF0B;\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cp style=\"display: flex; align-items: center; max-inline-size: 55ch; width: 100%;\"\u003eSuitable for printing high-temperature materials\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; gap: 1em; align-items: center;\"\u003e\n\u003csvg color=\"#5DAF0B\" data-prefix=\"fal\" data-icon=\"plus\" role=\"img\" viewbox=\"0 0 448 512\" aria-hidden=\"true\" style=\"width: 2em; height: auto;\"\u003e\u003cpath fill=\"currentColor\" d=\"M240 48c0-8.8-7.2-16-16-16s-16 7.2-16 16l0 192-192 0c-8.8 0-16 7.2-16 16s7.2 16 16 16l192 0 0 192c0 8.8 7.2 16 16 16s16-7.2 16-16l0-192 192 0c8.8 0 16-7.2 16-16s-7.2-16-16-16l-192 0 0-192z\" style=\"color:#5DAF0B;\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cp style=\"display: flex; align-items: center; max-inline-size: 55ch; width: 100%;\"\u003eTransfers texture to prints\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; gap: 1em; align-items: center;\"\u003e\n\u003csvg color=\"#5DAF0B\" data-prefix=\"fal\" data-icon=\"plus\" role=\"img\" viewbox=\"0 0 448 512\" aria-hidden=\"true\" style=\"width: 2em; height: auto;\"\u003e\u003cpath fill=\"currentColor\" d=\"M240 48c0-8.8-7.2-16-16-16s-16 7.2-16 16l0 192-192 0c-8.8 0-16 7.2-16 16s7.2 16 16 16l192 0 0 192c0 8.8 7.2 16 16 16s16-7.2 16-16l0-192 192 0c8.8 0 16-7.2 16-16s-7.2-16-16-16l-192 0 0-192z\" style=\"color:#5DAF0B;\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cp style=\"display: flex; align-items: center; max-inline-size: 55ch; width: 100%;\"\u003eMore forgiving Live Adjust Z setting\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; gap: 1em; align-items: center;\"\u003e\n\u003csvg color=\"#5DAF0B\" data-prefix=\"fal\" data-icon=\"plus\" role=\"img\" viewbox=\"0 0 448 512\" aria-hidden=\"true\" style=\"width: 2em; height: auto;\"\u003e\u003cpath fill=\"currentColor\" d=\"M240 48c0-8.8-7.2-16-16-16s-16 7.2-16 16l0 192-192 0c-8.8 0-16 7.2-16 16s7.2 16 16 16l192 0 0 192c0 8.8 7.2 16 16 16s16-7.2 16-16l0-192 192 0c8.8 0 16-7.2 16-16s-7.2-16-16-16l-192 0 0-192z\" style=\"color:#5DAF0B;\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cp style=\"display: flex; align-items: center; max-inline-size: 55ch; width: 100%;\"\u003eCan be washed only with dish soap and water\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; gap: 1em; align-items: center;\"\u003e\n\u003csvg color=\"#CB2C2C\" data-prefix=\"fal\" data-icon=\"minus\" role=\"img\" viewbox=\"0 0 448 512\" aria-hidden=\"true\" style=\"width: 2em; height: auto;\"\u003e\u003cpath fill=\"currentColor\" d=\"M0 256c0-8.8 7.2-16 16-16l416 0c8.8 0 16 7.2 16 16s-7.2 16-16 16L16 272c-8.8 0-16-7.2-16-16z\" style=\"color:#CB2C2C;\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cp style=\"display: flex; align-items: center; max-inline-size: 55ch; width: 100%;\"\u003eRequires a separation layer (\u003ca class=\"voxel-product-description-link\" href=\"https:\/\/www.voxelfactory.com\/products\/magigoo-pro-ht\"\u003eMagigoo HT\u003c\/a\u003e)\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; gap: 1em; align-items: center;\"\u003e\n\u003csvg color=\"#CB2C2C\" data-prefix=\"fal\" data-icon=\"minus\" role=\"img\" viewbox=\"0 0 448 512\" aria-hidden=\"true\" style=\"width: 2em; height: auto;\"\u003e\u003cpath fill=\"currentColor\" d=\"M0 256c0-8.8 7.2-16 16-16l416 0c8.8 0 16 7.2 16 16s-7.2 16-16 16L16 272c-8.8 0-16-7.2-16-16z\" style=\"color:#CB2C2C;\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cp style=\"display: flex; align-items: center; max-inline-size: 55ch; width: 100%;\"\u003eUnsuitable for low-temperature materials, such as PLA and PETG\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; gap: 1em; align-items: center;\"\u003e\n\u003csvg color=\"#CB2C2C\" data-prefix=\"fal\" data-icon=\"minus\" role=\"img\" viewbox=\"0 0 448 512\" aria-hidden=\"true\" style=\"width: 2em; height: auto;\"\u003e\u003cpath fill=\"currentColor\" d=\"M0 256c0-8.8 7.2-16 16-16l416 0c8.8 0 16 7.2 16 16s-7.2 16-16 16L16 272c-8.8 0-16-7.2-16-16z\" style=\"color:#CB2C2C;\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cp style=\"display: flex; align-items: center; max-inline-size: 55ch; width: 100%;\"\u003eGets damaged when cleaned with alcohol-based solvents\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eNotes:\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eConsumable parts, such as print sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks, or other cosmetic damage, is also not covered by the warranty. This includes dots caused by probing during the mesh bed leveling process, visible purge line, and local surface damage caused by applying an insufficient amount of\u003cspan\u003e \u003c\/span\u003e\u003ca class=\"voxel-product-description-link\" href=\"https:\/\/www.voxelfactory.com\/products\/magigoo-pro-ht\"\u003eMagigoo HT\u003c\/a\u003e. Only defective sheets on arrival are covered by warranty.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv style=\"display: flex; gap: 0.5em;\"\u003e\n\u003cdiv style=\"display: flex; flex-direction: column;\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/local-damage.jpg?v=1764686982\" alt=\"Local damage\"\u003e\u003cspan\u003eLocal surface damage\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; flex-direction: column;\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/nozzle-scratches.jpg?v=1764686981\" alt=\"Nozzles scratches\"\u003e\u003cspan\u003eScratched surface\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; flex-direction: column;\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/nozzle-dots.jpg?v=1764686982\" alt=\"Nozzles dots\"\u003e\u003cspan\u003eVisible dots caused by probing\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}

HighTemp Powder-coated Print Sheet [HT90]

Product Description

Voxel SKU: PRU-SHT-HTP-HT90-000

Vendor: Prusa Research

$199.99

Maximum quantity available reached.

Tags : HT90

Related Products

Polymaker Polyterra PLA 1.75mm 1kg

IN STOCK: 365

From $25.99

Polymaker PolyLite PLA 1.75mm 1kg

IN STOCK: 64

$27.99

3DLAC for strong ABS (and more) adhesion to glass

IN STOCK: 0

$9.99

{"id":355423505,"title":"3DLAC for strong ABS (and more) adhesion to glass","handle":"3dlac-tapes-replacement-to-make-abs-pla-and-_xt-stick-properly-to-heated-glass","description":"\u003cp\u003eThe polyvalent adhesion solution for your 3D printing needs. Use with\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"Blue Painter's Tape at Voxel Factory\" href=\"https:\/\/voxelfactory.myshopify.com\/products\/3m-2090-scotch-blue-painters-tape-48mm-x-54-8m\" target=\"_blank\"\u003eblue painter's tape\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eon a cold print bed, or directly on glass or PEI-covered heatbeds to maximize part adhesion, prevent warping and reduce print failures. Useful for printing PLA, ABS, polycarbonate, PETG, copolyester, and more!\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #cc0000;\"\u003e*** PLEASE NOTE THAT 3DLAC CAN ONLY BE SHIPPED INSIDE CANADA BY FEDEX GROUND OR CANADA POST (ALL SERVICES). Any order containing this product with any FEDEX EXPRESS or PRIORITY, or shipping outside Canada will be cancelled ***\u003c\/span\u003e For priority (air) shipping you should order \u003ca title=\"3DLAC Plus adhesive solution at Voxel Factory\" href=\"\/products\/3dlac-plus-adhesive-solution\" target=\"_blank\"\u003e3DLAC Plus\u003c\/a\u003e, as its contents are not pressurized.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDoes not work with Nylon, use PVA glue stick (like Elmer's) instead.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eVolume :\u003cb\u003e\u003cspan\u003e 4\u003c\/span\u003e00mL\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eContents : Isopropyl alcohol - Methylal - Isobutane - Propane - VP\/VA copolymer - Alcohol denat - Parfum (Benzyl alcohol, Benzyl salicilate, Coumarin, Geraniol, Butylphenyl Methylpropional, Linalool, Benzyl benzoate, Citronellol, Alphaisomethylionone, Hydroxycitronellal, Amyl cinnamal)\u003c\/span\u003e\u003c\/p\u003e","published_at":"2022-04-12T14:53:10-04:00","created_at":"2014-08-11T15:21:35-04:00","vendor":"LABORATORIOS 3D PRINT, S.L.","type":"Tools","tags":["3DLac","adhesive","Tools"],"price":999,"price_min":999,"price_max":999,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29203593756790,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LEO-3DL-AC1-CAN-400","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"3DLAC for strong ABS (and more) adhesion to glass","public_title":null,"options":["Default Title"],"price":999,"weight":500,"compare_at_price":null,"inventory_quantity":-1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"8411322235803","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/products\/tools-3dlac-for-strong-abs-and-more-adhesion-to-glass-1_1400x_4721f59d-6c64-4a8b-bab4-851ced50ca48.jpg?v=1739808877"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/tools-3dlac-for-strong-abs-and-more-adhesion-to-glass-1_1400x_4721f59d-6c64-4a8b-bab4-851ced50ca48.jpg?v=1739808877","options":["Title"],"media":[{"alt":"3DLAC for strong ABS (and more) adhesion to glass - Voxel Factory -3D printer- Imprimante 3D","id":29007220310252,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/tools-3dlac-for-strong-abs-and-more-adhesion-to-glass-1_1400x_4721f59d-6c64-4a8b-bab4-851ced50ca48.jpg?v=1739808877"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/tools-3dlac-for-strong-abs-and-more-adhesion-to-glass-1_1400x_4721f59d-6c64-4a8b-bab4-851ced50ca48.jpg?v=1739808877","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThe polyvalent adhesion solution for your 3D printing needs. Use with\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"Blue Painter's Tape at Voxel Factory\" href=\"https:\/\/voxelfactory.myshopify.com\/products\/3m-2090-scotch-blue-painters-tape-48mm-x-54-8m\" target=\"_blank\"\u003eblue painter's tape\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eon a cold print bed, or directly on glass or PEI-covered heatbeds to maximize part adhesion, prevent warping and reduce print failures. Useful for printing PLA, ABS, polycarbonate, PETG, copolyester, and more!\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #cc0000;\"\u003e*** PLEASE NOTE THAT 3DLAC CAN ONLY BE SHIPPED INSIDE CANADA BY FEDEX GROUND OR CANADA POST (ALL SERVICES). Any order containing this product with any FEDEX EXPRESS or PRIORITY, or shipping outside Canada will be cancelled ***\u003c\/span\u003e For priority (air) shipping you should order \u003ca title=\"3DLAC Plus adhesive solution at Voxel Factory\" href=\"\/products\/3dlac-plus-adhesive-solution\" target=\"_blank\"\u003e3DLAC Plus\u003c\/a\u003e, as its contents are not pressurized.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDoes not work with Nylon, use PVA glue stick (like Elmer's) instead.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eVolume :\u003cb\u003e\u003cspan\u003e 4\u003c\/span\u003e00mL\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eContents : Isopropyl alcohol - Methylal - Isobutane - Propane - VP\/VA copolymer - Alcohol denat - Parfum (Benzyl alcohol, Benzyl salicilate, Coumarin, Geraniol, Butylphenyl Methylpropional, Linalool, Benzyl benzoate, Citronellol, Alphaisomethylionone, Hydroxycitronellal, Amyl cinnamal)\u003c\/span\u003e\u003c\/p\u003e"}

3DLAC for strong ABS (and more) adhesion to glass

$9.99

The polyvalent adhesion solution for your 3D printing needs. Use with blue painter's tape on a cold print bed, or directly on glass or PEI-covered heatbeds to maximize part adhesion, prevent warping and reduce print failures. Useful for printing PLA, ABS, polycarbonate, PETG, copolyester, and more! *** PLEASE NOTE THAT 3DLAC CAN ONLY BE SHIPPED ...

Sale

Polymaker PolyLite PETG 1.75mm 1kg

IN STOCK: 16

$19.99 $27.99

3DLAC Plus Adhesive Solution 100mL

IN STOCK: 166

$9.99

{"id":3874371698806,"title":"3DLAC Plus Adhesive Solution 100mL","handle":"3dlac-plus-adhesive-solution","description":"\u003cp\u003eThe polyvalent adhesion solution for your 3D printing needs. Use with \u003ca href=\"\/products\/3m-2090-scotch-blue-painters-tape-48mm-x-54-8m\" title=\"Blue Painter's Tape at Voxel Factory\" target=\"_blank\"\u003eblue painter's tape\u003c\/a\u003e on a cold print bed, or directly on glass or PEI-covered heatbeds to maximize part adhesion, prevent warping and reduce print failures. \u003cspan\u003eUseful for printing PLA, ABS, polycarbonate, PETG, copolyester, and more!\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eUnlike its sibling the \u003ca href=\"https:\/\/voxelfactory.com\/collections\/tools\/products\/3dlac-tapes-replacement-to-make-abs-pla-and-_xt-stick-properly-to-heated-glass\" title=\"3DLAC Spray at Voxel Factory\"\u003e3DLAC Spray\u003c\/a\u003e, this bottle is not pressurized, and can be shipped by air in limited quantities.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDoes not work with Nylon, use PVA glue stick (like Elmer's) instead.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eVolume :\u003cb\u003e 100mL\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eContents : Isopropyl alcohol - Methylal - Isobutane - Propane - VP\/VA copolymer - Alcohol denat - Parfum (Benzyl alcohol, Benzyl salicilate, Coumarin, Geraniol, Butylphenyl Methylpropional, Linalool, Benzyl benzoate, Citronellol, Alphaisomethylionone, Hydroxycitronellal, Amyl cinnamal)\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ffffff;\"\u003e\u003cb\u003e3D Lac\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e","published_at":"2019-06-20T17:21:40-04:00","created_at":"2019-06-20T13:48:47-04:00","vendor":"LABORATORIOS 3D PRINT, S.L.","type":"Tools","tags":["3DLac","adhesive","Tools"],"price":999,"price_min":999,"price_max":999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29203505315958,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LAB-ADH-3DL-BTL-100","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"3DLAC Plus Adhesive Solution 100mL","public_title":null,"options":["Default Title"],"price":999,"weight":250,"compare_at_price":null,"inventory_quantity":60,"inventory_management":"shopify","inventory_policy":"deny","barcode":"8411322240500","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/products\/tools-3dlac-plus-adhesive-solution-100ml-1_1400x_d8011184-0de9-44da-921b-b955b208c1f7.jpg?v=1739809135"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/tools-3dlac-plus-adhesive-solution-100ml-1_1400x_d8011184-0de9-44da-921b-b955b208c1f7.jpg?v=1739809135","options":["Title"],"media":[{"alt":"3DLAC Plus Adhesive Solution 100mL - Voxel Factory -3D printer- Imprimante 3D","id":29007229059308,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/tools-3dlac-plus-adhesive-solution-100ml-1_1400x_d8011184-0de9-44da-921b-b955b208c1f7.jpg?v=1739809135"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/tools-3dlac-plus-adhesive-solution-100ml-1_1400x_d8011184-0de9-44da-921b-b955b208c1f7.jpg?v=1739809135","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThe polyvalent adhesion solution for your 3D printing needs. Use with \u003ca href=\"\/products\/3m-2090-scotch-blue-painters-tape-48mm-x-54-8m\" title=\"Blue Painter's Tape at Voxel Factory\" target=\"_blank\"\u003eblue painter's tape\u003c\/a\u003e on a cold print bed, or directly on glass or PEI-covered heatbeds to maximize part adhesion, prevent warping and reduce print failures. \u003cspan\u003eUseful for printing PLA, ABS, polycarbonate, PETG, copolyester, and more!\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eUnlike its sibling the \u003ca href=\"https:\/\/voxelfactory.com\/collections\/tools\/products\/3dlac-tapes-replacement-to-make-abs-pla-and-_xt-stick-properly-to-heated-glass\" title=\"3DLAC Spray at Voxel Factory\"\u003e3DLAC Spray\u003c\/a\u003e, this bottle is not pressurized, and can be shipped by air in limited quantities.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDoes not work with Nylon, use PVA glue stick (like Elmer's) instead.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eVolume :\u003cb\u003e 100mL\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eContents : Isopropyl alcohol - Methylal - Isobutane - Propane - VP\/VA copolymer - Alcohol denat - Parfum (Benzyl alcohol, Benzyl salicilate, Coumarin, Geraniol, Butylphenyl Methylpropional, Linalool, Benzyl benzoate, Citronellol, Alphaisomethylionone, Hydroxycitronellal, Amyl cinnamal)\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ffffff;\"\u003e\u003cb\u003e3D Lac\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e"}

3DLAC Plus Adhesive Solution 100mL

$9.99

Brass Nozzle 0.40mm for E3D V6 Hot End

IN STOCK: 0

$9.99

{"id":8859304521,"title":"Brass Nozzle 0.40mm for E3D V6 Hot End","handle":"brass-nozzle-0-4mm-for-e3d-v6-hot-end","description":"\u003cp\u003e0.40mm brass nozzle for E3D v6 hotends.\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003eMaterial : \u003cstrong\u003eBrass\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOpening diameter : \u003cstrong\u003e0.40mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFilament diameter : \u003cstrong\u003e1.75mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThread : \u003cstrong\u003eM6\u003c\/strong\u003e\u003c\/p\u003e","published_at":"2017-12-13T14:22:44-05:00","created_at":"2017-02-13T15:00:27-05:00","vendor":"E3D","type":"Open Parts","tags":["0.4mm","e3d","MK2","MK2S","MK3","MK3S","nozzle"],"price":999,"price_min":999,"price_max":999,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30803869129,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-NOZ-E3D-HOT-040","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Brass Nozzle 0.40mm for E3D V6 Hot End","public_title":null,"options":["Default Title"],"price":999,"weight":100,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-brass-nozzle-0-40mm-for-e3d-v6-hot-end-1_1400x_1f45b807-dff3-4a4a-968c-cab45a71ef8a.jpg?v=1739808910"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-brass-nozzle-0-40mm-for-e3d-v6-hot-end-1_1400x_1f45b807-dff3-4a4a-968c-cab45a71ef8a.jpg?v=1739808910","options":["Title"],"media":[{"alt":"Brass Nozzle 0.40mm for E3D V6 Hot End - Voxel Factory -3D printer- Imprimante 3D","id":29057154416876,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-brass-nozzle-0-40mm-for-e3d-v6-hot-end-1_1400x_1f45b807-dff3-4a4a-968c-cab45a71ef8a.jpg?v=1739808910"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-brass-nozzle-0-40mm-for-e3d-v6-hot-end-1_1400x_1f45b807-dff3-4a4a-968c-cab45a71ef8a.jpg?v=1739808910","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e0.40mm brass nozzle for E3D v6 hotends.\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003eMaterial : \u003cstrong\u003eBrass\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOpening diameter : \u003cstrong\u003e0.40mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFilament diameter : \u003cstrong\u003e1.75mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThread : \u003cstrong\u003eM6\u003c\/strong\u003e\u003c\/p\u003e"}

Brass Nozzle 0.40mm for E3D V6 Hot End

$9.99

0.40mm brass nozzle for E3D v6 hotends. Specs Material : Brass Opening diameter : 0.40mm Filament diameter : 1.75mm Thread : M6

Hotend thermistor for Prusa i3 MK2 and MK3

IN STOCK: 1

$14.99

{"id":10411346953,"title":"Hotend thermistor for Prusa i3 MK2 and MK3","handle":"replacement-thermistor-for-prusa-i3-mk2","description":"\u003cp\u003eReplacement hotend thermistor. Fully wired and ready to be installed.\u003c\/p\u003e\n\u003cp\u003eIt is ONLY compatible with MK2 \/ MK2S \/ MK2.5 \/ MK2.5S \/ MK3 \/ MK3S \/ MK3S+ \/ MK3.5\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThis product includes:\u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eHotend thermistor (1 pcs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eConnector: Molex 5057-9402\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eCable length: 750 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTo correctly install this replacement part, visit the Prusa Research knowledge base at \u003ca target=\"_blank\" href=\"https:\/\/help.prusa3d.com\/\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003ehelp.prusa3d.com\u003c\/span\u003e\u003c\/a\u003e, select your specific printer model, and follow the instructions provided in the repair manual.\u003c\/p\u003e","published_at":"2017-12-13T14:22:44-05:00","created_at":"2017-09-11T12:56:47-04:00","vendor":"E3D","type":"Prusa Research Parts","tags":["MK2","MK2.5","MK2.5S","MK2S","MK3","MK3.5","MK3S","MK3S-Plus"],"price":1499,"price_min":1499,"price_max":1499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45180568201,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-THR-E3D-000-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Hotend thermistor for Prusa i3 MK2 and MK3","public_title":null,"options":["Default Title"],"price":1499,"weight":100,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-replacement-thermistor-for-prusa-i3-mk2s-and-mk3-1_1400x_e3d41d4f-2f01-42bc-b67b-00266d326257.jpg?v=1739808996"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-replacement-thermistor-for-prusa-i3-mk2s-and-mk3-1_1400x_e3d41d4f-2f01-42bc-b67b-00266d326257.jpg?v=1739808996","options":["Title"],"media":[{"alt":"Hotend thermistor for Prusa i3 MK2 and MK3 - Voxel Factory -3D printer- Imprimante 3D","id":28990215454956,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-replacement-thermistor-for-prusa-i3-mk2s-and-mk3-1_1400x_e3d41d4f-2f01-42bc-b67b-00266d326257.jpg?v=1739808996"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-replacement-thermistor-for-prusa-i3-mk2s-and-mk3-1_1400x_e3d41d4f-2f01-42bc-b67b-00266d326257.jpg?v=1739808996","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eReplacement hotend thermistor. Fully wired and ready to be installed.\u003c\/p\u003e\n\u003cp\u003eIt is ONLY compatible with MK2 \/ MK2S \/ MK2.5 \/ MK2.5S \/ MK3 \/ MK3S \/ MK3S+ \/ MK3.5\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThis product includes:\u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eHotend thermistor (1 pcs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eConnector: Molex 5057-9402\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eCable length: 750 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTo correctly install this replacement part, visit the Prusa Research knowledge base at \u003ca target=\"_blank\" href=\"https:\/\/help.prusa3d.com\/\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003ehelp.prusa3d.com\u003c\/span\u003e\u003c\/a\u003e, select your specific printer model, and follow the instructions provided in the repair manual.\u003c\/p\u003e"}

Hotend thermistor for Prusa i3 MK2 and MK3

$14.99

Replacement hotend thermistor. Fully wired and ready to be installed. It is ONLY compatible with MK2 / MK2S / MK2.5 / MK2.5S / MK3 / MK3S / MK3S+ / MK3.5 This product includes: Hotend thermistor (1 pcs) Specifications: Connector: Molex 5057-9402 Cable length: 750 mm To correctly install this replacement part, visit the Prusa Research kno...

Smooth-On XTC-3D® High Performance Coating

IN STOCK: 0

From $17.00

{"id":397267696,"title":"Smooth-On XTC-3D® High Performance Coating","handle":"xtc-3d-high-performance-3d-print-coating","description":"\u003cdiv\u003e\u003cstrong\u003e* 6.4 oz or 24 oz\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e** For industrial use only\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e*** SLA\/SLS prints, FDM Prints (ABS, PLA, Laywoo-D3, WoodFill, T-GLASE etc.)\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan style=\"color: #000000;\"\u003e\u003ca href=\"http:\/\/www.taulman3d.com\/t-glase-optics.html\" title=\"Hacking t-glase to look more like glass!\" style=\"color: #000000;\"\u003e\u003cstrong\u003e\u003cspan size=\"6\" color=\"#105767\" style=\"font-size: large;\"\u003e*** -\u0026gt; Hacking t-glase to look more like glass! \u0026lt;- ***\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eXTC-3D®\u003c\/strong\u003e\u003cspan\u003e is a protective coating for smoothing and finishing 3D printed parts. Two liquids are mixed together and brushed onto any 3D print. Coating self-levels and wets out uniformly without leaving brush strokes. Working time is 10 minutes and cure time is about 4 hours (depending on mass and temperature). XTC-3D® cures to a hard, impact resistant coating that can be sanded, primed and painted. Adding colors and metal effects is easy.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003eInexpensive to Use:\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e 1 oz covers 100+ square inches.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003e90% Time \u0026amp; Labor Savings:\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e XTC-3D® fills in 3D print striations and creates a smooth, high gloss finish. The need to post finish is almost eliminated.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003eCoat any 3D Print Surface:\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e XTC-3D® can be applied to both SLA and SLS prints. It works with PLA, ABS, Laywood, Powder Printed Parts and other rigid media. It also can be used to coat EPS, EPDM and urethane foam as well as wood, plaster, fabric, cardboard and paper.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eXTC-3D® does not contain VOC's, phthalates or phosphates.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca href=\"http:\/\/www.smooth-on.com\/index\/view_tb.php?products_id=302\"\u003e\u003cimg src=\"http:\/\/www.smooth-on.com\/images\/button_icon_tb.gif\" border=\"0\" alt=\"Technical\" bulletin=\"\"\u003e\u003c\/a\u003e\u003ca href=\"http:\/\/www.smooth-on.com\/index\/view_msds.php?products_id=302\"\u003e\u003cimg src=\"http:\/\/www.smooth-on.com\/images\/button_icon_msds.gif\" border=\"0\" alt=\"MSDS\"\u003e\u003c\/a\u003e\u003ca href=\"http:\/\/www.smooth-on.com\/index.php?cPath=1397_1429#media\"\u003e\u003cimg src=\"http:\/\/www.smooth-on.com\/images\/button_icon_media.gif\" border=\"0\"\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e","published_at":"2014-12-23T10:02:00-05:00","created_at":"2014-12-23T10:11:58-05:00","vendor":"Smooth-On","type":"Tools","tags":["Tools"],"price":1700,"price_min":1700,"price_max":4800,"available":false,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":1072896796,"title":"6.4 Oz","option1":"6.4 Oz","option2":null,"option3":null,"sku":"SMO-XTC-COA-064-OOZ","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Smooth-On XTC-3D® High Performance Coating - 6.4 Oz","public_title":"6.4 Oz","options":["6.4 Oz"],"price":1700,"weight":500,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"751635696211","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":3620344261,"title":"24 Oz","option1":"24 Oz","option2":null,"option3":null,"sku":"SMO-XTC-COA-240-OOZ","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Smooth-On XTC-3D® High Performance Coating - 24 Oz","public_title":"24 Oz","options":["24 Oz"],"price":4800,"weight":1000,"compare_at_price":null,"inventory_quantity":-1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"751635696419","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/products\/tools-smooth-on-xtc-3d-high-performance-coating-1_1400x_368170d8-f27f-4482-b070-6cc09dfa421c.jpg?v=1739808879","\/\/www.voxelfactory.com\/cdn\/shop\/products\/tools-smooth-on-xtc-3d-high-performance-coating-2_1400x_30929058-9e73-435b-87d1-0f9d5378e41b.jpg?v=1739808880","\/\/www.voxelfactory.com\/cdn\/shop\/products\/tools-smooth-on-xtc-3d-high-performance-coating-3_1400x_98af8e81-7af4-4af0-9907-519b55512995.jpg?v=1739808881"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/tools-smooth-on-xtc-3d-high-performance-coating-1_1400x_368170d8-f27f-4482-b070-6cc09dfa421c.jpg?v=1739808879","options":["Size"],"media":[{"alt":"Smooth-On XTC-3D® High Performance Coating - Voxel Factory -3D printer- Imprimante 3D","id":29008343531756,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/tools-smooth-on-xtc-3d-high-performance-coating-1_1400x_368170d8-f27f-4482-b070-6cc09dfa421c.jpg?v=1739808879"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/tools-smooth-on-xtc-3d-high-performance-coating-1_1400x_368170d8-f27f-4482-b070-6cc09dfa421c.jpg?v=1739808879","width":1400},{"alt":"Smooth-On XTC-3D® High Performance Coating - Voxel Factory -3D printer- Imprimante 3D","id":29008343892204,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/tools-smooth-on-xtc-3d-high-performance-coating-2_1400x_30929058-9e73-435b-87d1-0f9d5378e41b.jpg?v=1739808880"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/tools-smooth-on-xtc-3d-high-performance-coating-2_1400x_30929058-9e73-435b-87d1-0f9d5378e41b.jpg?v=1739808880","width":1400},{"alt":"Smooth-On XTC-3D® High Performance Coating - Voxel Factory -3D printer- Imprimante 3D","id":29008344613100,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/tools-smooth-on-xtc-3d-high-performance-coating-3_1400x_98af8e81-7af4-4af0-9907-519b55512995.jpg?v=1739808881"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/tools-smooth-on-xtc-3d-high-performance-coating-3_1400x_98af8e81-7af4-4af0-9907-519b55512995.jpg?v=1739808881","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv\u003e\u003cstrong\u003e* 6.4 oz or 24 oz\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e** For industrial use only\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e*** SLA\/SLS prints, FDM Prints (ABS, PLA, Laywoo-D3, WoodFill, T-GLASE etc.)\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan style=\"color: #000000;\"\u003e\u003ca href=\"http:\/\/www.taulman3d.com\/t-glase-optics.html\" title=\"Hacking t-glase to look more like glass!\" style=\"color: #000000;\"\u003e\u003cstrong\u003e\u003cspan size=\"6\" color=\"#105767\" style=\"font-size: large;\"\u003e*** -\u0026gt; Hacking t-glase to look more like glass! \u0026lt;- ***\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eXTC-3D®\u003c\/strong\u003e\u003cspan\u003e is a protective coating for smoothing and finishing 3D printed parts. Two liquids are mixed together and brushed onto any 3D print. Coating self-levels and wets out uniformly without leaving brush strokes. Working time is 10 minutes and cure time is about 4 hours (depending on mass and temperature). XTC-3D® cures to a hard, impact resistant coating that can be sanded, primed and painted. Adding colors and metal effects is easy.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003eInexpensive to Use:\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e 1 oz covers 100+ square inches.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003e90% Time \u0026amp; Labor Savings:\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e XTC-3D® fills in 3D print striations and creates a smooth, high gloss finish. The need to post finish is almost eliminated.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003eCoat any 3D Print Surface:\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e XTC-3D® can be applied to both SLA and SLS prints. It works with PLA, ABS, Laywood, Powder Printed Parts and other rigid media. It also can be used to coat EPS, EPDM and urethane foam as well as wood, plaster, fabric, cardboard and paper.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eXTC-3D® does not contain VOC's, phthalates or phosphates.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca href=\"http:\/\/www.smooth-on.com\/index\/view_tb.php?products_id=302\"\u003e\u003cimg src=\"http:\/\/www.smooth-on.com\/images\/button_icon_tb.gif\" border=\"0\" alt=\"Technical\" bulletin=\"\"\u003e\u003c\/a\u003e\u003ca href=\"http:\/\/www.smooth-on.com\/index\/view_msds.php?products_id=302\"\u003e\u003cimg src=\"http:\/\/www.smooth-on.com\/images\/button_icon_msds.gif\" border=\"0\" alt=\"MSDS\"\u003e\u003c\/a\u003e\u003ca href=\"http:\/\/www.smooth-on.com\/index.php?cPath=1397_1429#media\"\u003e\u003cimg src=\"http:\/\/www.smooth-on.com\/images\/button_icon_media.gif\" border=\"0\"\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e"}

Smooth-On XTC-3D® High Performance Coating

$17.00

* 6.4 oz or 24 oz ** For industrial use only *** SLA/SLS prints, FDM Prints (ABS, PLA, Laywoo-D3, WoodFill, T-GLASE etc.) *** -> Hacking t-glase to look more like glass! <- *** XTC-3D® is a protective coating for smoothing and finishing 3D printed parts. Two liquids are mixed together and brushed onto any 3D print. Coating self-levels...

Size

6.4 Oz

24 Oz

Polymaker PolyLite Silk PLA 1.75mm 1kg

IN STOCK: 50

$31.99

{"id":7446331621612,"title":"Polymaker PolyLite Silk PLA 1.75mm 1kg","handle":"polymaker-polylite-silk-pla-1-75mm-1kg","description":"\u003cp data-mce-fragment=\"1\"\u003ePolyLite PLA by Polymaker is a high-quality PLA filament designed for reliability and ease of printing.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFilament diameter :\u003cstrong data-mce-fragment=\"1\"\u003e 1.75mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eNet weight : \u003cstrong data-mce-fragment=\"1\"\u003e1kg\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eColor : \u003cstrong data-mce-fragment=\"1\"\u003ebronze, silver, gold, lime, blue and magenta\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003eTechnical Data Sheet\u003c\/h5\u003e\n\u003cp data-mce-fragment=\"1\"\u003eClick \u003ca href=\"https:\/\/www.poly-maker.jp\/download\/TDS\/Polylite_PLA_Silk_EN_V5.1.pdf\" rel=\"noopener noreferrer\" target=\"_blank\"\u003ehere\u003c\/a\u003e to download the Technical Data Sheet for the PolyLite Silk PLA filament.\u003c\/p\u003e","published_at":"2021-11-13T19:16:19-05:00","created_at":"2021-11-13T19:16:19-05:00","vendor":"Polymaker","type":"Polymaker 1.75mm filaments","tags":["1.75mm","pla","polymaker"],"price":3199,"price_min":3199,"price_max":3199,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":42051661660396,"title":"Blue","option1":"Blue","option2":null,"option3":null,"sku":"PMK-SLK-BLU-175-1KG","requires_shipping":true,"taxable":true,"featured_image":{"id":34594405056748,"product_id":7446331621612,"position":2,"created_at":"2021-11-13T19:19:33-05:00","updated_at":"2025-02-17T11:27:12-05:00","alt":"Polymaker PolyLite Silk PLA 1.75mm 1kg - Voxel Factory -3D printer- Imprimante 3D","width":1400,"height":1050,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkBlue_175_1.jpg?v=1739809632","variant_ids":[42051661660396]},"available":true,"name":"Polymaker PolyLite Silk PLA 1.75mm 1kg - Blue","public_title":"Blue","options":["Blue"],"price":3199,"weight":1400,"compare_at_price":null,"inventory_quantity":8,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","featured_media":{"alt":"Polymaker PolyLite Silk PLA 1.75mm 1kg - Voxel Factory -3D printer- Imprimante 3D","id":26928675094764,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkBlue_175_1.jpg?v=1739809632"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":42051662414060,"title":"Bronze","option1":"Bronze","option2":null,"option3":null,"sku":"PMK-SLK-BNZ-175-1KG","requires_shipping":true,"taxable":true,"featured_image":{"id":34594405548268,"product_id":7446331621612,"position":3,"created_at":"2021-11-13T19:20:19-05:00","updated_at":"2025-02-17T11:27:13-05:00","alt":"Polymaker PolyLite Silk PLA 1.75mm 1kg - Voxel Factory -3D printer- Imprimante 3D","width":1400,"height":1050,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkBronze_175_1.jpg?v=1739809633","variant_ids":[42051662414060]},"available":true,"name":"Polymaker PolyLite Silk PLA 1.75mm 1kg - Bronze","public_title":"Bronze","options":["Bronze"],"price":3199,"weight":1400,"compare_at_price":null,"inventory_quantity":5,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6938936708766","featured_media":{"alt":"Polymaker PolyLite Silk PLA 1.75mm 1kg - Voxel Factory -3D printer- Imprimante 3D","id":26928675619052,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkBronze_175_1.jpg?v=1739809633"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":42051662872812,"title":"Gold","option1":"Gold","option2":null,"option3":null,"sku":"PMK-SLK-GLD-175-1KG","requires_shipping":true,"taxable":true,"featured_image":{"id":34594405417196,"product_id":7446331621612,"position":4,"created_at":"2021-11-13T19:20:14-05:00","updated_at":"2025-02-17T11:27:14-05:00","alt":"Polymaker PolyLite Silk PLA 1.75mm 1kg - Voxel Factory -3D printer- Imprimante 3D","width":1400,"height":1050,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkGold_175_1.jpg?v=1739809634","variant_ids":[42051662872812]},"available":true,"name":"Polymaker PolyLite Silk PLA 1.75mm 1kg - Gold","public_title":"Gold","options":["Gold"],"price":3199,"weight":1400,"compare_at_price":null,"inventory_quantity":14,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","featured_media":{"alt":"Polymaker PolyLite Silk PLA 1.75mm 1kg - Voxel Factory -3D printer- Imprimante 3D","id":26928675520748,"position":4,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkGold_175_1.jpg?v=1739809634"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":42051663102188,"title":"Lime","option1":"Lime","option2":null,"option3":null,"sku":"PMK-SLK-LIM-175-1KG","requires_shipping":true,"taxable":true,"featured_image":{"id":34594405515500,"product_id":7446331621612,"position":5,"created_at":"2021-11-13T19:20:18-05:00","updated_at":"2025-02-17T11:27:16-05:00","alt":"Polymaker PolyLite Silk PLA 1.75mm 1kg - Voxel Factory -3D printer- Imprimante 3D","width":1400,"height":1050,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkLime_175_1.jpg?v=1739809636","variant_ids":[42051663102188]},"available":true,"name":"Polymaker PolyLite Silk PLA 1.75mm 1kg - Lime","public_title":"Lime","options":["Lime"],"price":3199,"weight":1400,"compare_at_price":null,"inventory_quantity":6,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","featured_media":{"alt":"Polymaker PolyLite Silk PLA 1.75mm 1kg - Voxel Factory -3D printer- Imprimante 3D","id":26928675586284,"position":5,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkLime_175_1.jpg?v=1739809636"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":42051663593708,"title":"Magenta","option1":"Magenta","option2":null,"option3":null,"sku":"PMK-SLK-MAG-175-1KG","requires_shipping":true,"taxable":true,"featured_image":{"id":34594405482732,"product_id":7446331621612,"position":6,"created_at":"2021-11-13T19:20:16-05:00","updated_at":"2025-02-17T11:27:17-05:00","alt":"Polymaker PolyLite Silk PLA 1.75mm 1kg - Voxel Factory -3D printer- Imprimante 3D","width":1400,"height":1050,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkMagenta_175_1.jpg?v=1739809637","variant_ids":[42051663593708]},"available":false,"name":"Polymaker PolyLite Silk PLA 1.75mm 1kg - Magenta","public_title":"Magenta","options":["Magenta"],"price":3199,"weight":1400,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","featured_media":{"alt":"Polymaker PolyLite Silk PLA 1.75mm 1kg - Voxel Factory -3D printer- Imprimante 3D","id":26928675553516,"position":6,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkMagenta_175_1.jpg?v=1739809637"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":42051664773356,"title":"Silver","option1":"Silver","option2":null,"option3":null,"sku":"PMK-SLK-SLV-175-1KG","requires_shipping":true,"taxable":true,"featured_image":{"id":34594405613804,"product_id":7446331621612,"position":7,"created_at":"2021-11-13T19:20:21-05:00","updated_at":"2025-02-17T11:27:18-05:00","alt":"Polymaker PolyLite Silk PLA 1.75mm 1kg - Voxel Factory -3D printer- Imprimante 3D","width":1400,"height":1050,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkSilver_175_1.jpg?v=1739809638","variant_ids":[42051664773356]},"available":true,"name":"Polymaker PolyLite Silk PLA 1.75mm 1kg - Silver","public_title":"Silver","options":["Silver"],"price":3199,"weight":1400,"compare_at_price":null,"inventory_quantity":17,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","featured_media":{"alt":"Polymaker PolyLite Silk PLA 1.75mm 1kg - Voxel Factory -3D printer- Imprimante 3D","id":26928675684588,"position":7,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkSilver_175_1.jpg?v=1739809638"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite-PLA-SILK-Image-COLLECTION-FInal.jpg?v=1739809631","\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkBlue_175_1.jpg?v=1739809632","\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkBronze_175_1.jpg?v=1739809633","\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkGold_175_1.jpg?v=1739809634","\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkLime_175_1.jpg?v=1739809636","\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkMagenta_175_1.jpg?v=1739809637","\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkSilver_175_1.jpg?v=1739809638"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite-PLA-SILK-Image-COLLECTION-FInal.jpg?v=1739809631","options":["Color"],"media":[{"alt":"Polymaker PolyLite Silk PLA 1.75mm 1kg - Voxel Factory -3D printer- Imprimante 3D","id":26928673784044,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite-PLA-SILK-Image-COLLECTION-FInal.jpg?v=1739809631"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite-PLA-SILK-Image-COLLECTION-FInal.jpg?v=1739809631","width":1400},{"alt":"Polymaker PolyLite Silk PLA 1.75mm 1kg - Voxel Factory -3D printer- Imprimante 3D","id":26928675094764,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkBlue_175_1.jpg?v=1739809632"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkBlue_175_1.jpg?v=1739809632","width":1400},{"alt":"Polymaker PolyLite Silk PLA 1.75mm 1kg - Voxel Factory -3D printer- Imprimante 3D","id":26928675619052,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkBronze_175_1.jpg?v=1739809633"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkBronze_175_1.jpg?v=1739809633","width":1400},{"alt":"Polymaker PolyLite Silk PLA 1.75mm 1kg - Voxel Factory -3D printer- Imprimante 3D","id":26928675520748,"position":4,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkGold_175_1.jpg?v=1739809634"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkGold_175_1.jpg?v=1739809634","width":1400},{"alt":"Polymaker PolyLite Silk PLA 1.75mm 1kg - Voxel Factory -3D printer- Imprimante 3D","id":26928675586284,"position":5,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkLime_175_1.jpg?v=1739809636"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkLime_175_1.jpg?v=1739809636","width":1400},{"alt":"Polymaker PolyLite Silk PLA 1.75mm 1kg - Voxel Factory -3D printer- Imprimante 3D","id":26928675553516,"position":6,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkMagenta_175_1.jpg?v=1739809637"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkMagenta_175_1.jpg?v=1739809637","width":1400},{"alt":"Polymaker PolyLite Silk PLA 1.75mm 1kg - Voxel Factory -3D printer- Imprimante 3D","id":26928675684588,"position":7,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkSilver_175_1.jpg?v=1739809638"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PolyLite_PLA_1kg-SilkSilver_175_1.jpg?v=1739809638","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp data-mce-fragment=\"1\"\u003ePolyLite PLA by Polymaker is a high-quality PLA filament designed for reliability and ease of printing.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFilament diameter :\u003cstrong data-mce-fragment=\"1\"\u003e 1.75mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eNet weight : \u003cstrong data-mce-fragment=\"1\"\u003e1kg\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eColor : \u003cstrong data-mce-fragment=\"1\"\u003ebronze, silver, gold, lime, blue and magenta\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003eTechnical Data Sheet\u003c\/h5\u003e\n\u003cp data-mce-fragment=\"1\"\u003eClick \u003ca href=\"https:\/\/www.poly-maker.jp\/download\/TDS\/Polylite_PLA_Silk_EN_V5.1.pdf\" rel=\"noopener noreferrer\" target=\"_blank\"\u003ehere\u003c\/a\u003e to download the Technical Data Sheet for the PolyLite Silk PLA filament.\u003c\/p\u003e"}

Polymaker PolyLite Silk PLA 1.75mm 1kg

$31.99

PolyLite PLA by Polymaker is a high-quality PLA filament designed for reliability and ease of printing. Filament diameter : 1.75mm Net weight : 1kg Color : bronze, silver, gold, lime, blue and magenta Technical Data Sheet Click here to download the Technical Data Sheet for the PolyLite Silk PLA filament.

Color

E3D Heater Cartridge 24V for Prusa i3 MK3/S/+

IN STOCK: 0

$11.99

{"id":1632151240822,"title":"E3D Heater Cartridge 24V for Prusa i3 MK3\/S\/+","handle":"replacement-e3d-heater-cartridge-24v-for-prusa-i3-mk3","description":"\u003cp\u003eReplacement heater cartridge. Fully wired and ready to be installed.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe heater cartridge is ready to fit to a Molex 0395300002 connector (not included, see accessories); you can reuse the one already on your board if replacing an existing heater cartridge.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePower : \u003cstrong\u003e40W 24V\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is ONLY compatible with Prusa i3 MK3 \/ MK3S \/ MK3S+\u003c\/p\u003e","published_at":"2017-12-13T14:22:45-05:00","created_at":"2018-06-26T15:13:03-04:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":["MK3","MK3S","MK3S-Plus"],"price":1199,"price_min":1199,"price_max":1199,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":14699569348726,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-HTC-E3D-040-24V","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"E3D Heater Cartridge 24V for Prusa i3 MK3\/S\/+","public_title":null,"options":["Default Title"],"price":1199,"weight":100,"compare_at_price":null,"inventory_quantity":-2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-replacement-e3d-heater-cartridge-24v-for-prusa-i3-mk3-1_1400x_8405472d-3779-4941-a6a6-541f1127e111.jpg?v=1739809054"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-replacement-e3d-heater-cartridge-24v-for-prusa-i3-mk3-1_1400x_8405472d-3779-4941-a6a6-541f1127e111.jpg?v=1739809054","options":["Title"],"media":[{"alt":"E3D Heater Cartridge 24V for Prusa i3 MK3\/S - Voxel Factory -3D printer- Imprimante 3D","id":28990234001644,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-replacement-e3d-heater-cartridge-24v-for-prusa-i3-mk3-1_1400x_8405472d-3779-4941-a6a6-541f1127e111.jpg?v=1739809054"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-replacement-e3d-heater-cartridge-24v-for-prusa-i3-mk3-1_1400x_8405472d-3779-4941-a6a6-541f1127e111.jpg?v=1739809054","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eReplacement heater cartridge. Fully wired and ready to be installed.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe heater cartridge is ready to fit to a Molex 0395300002 connector (not included, see accessories); you can reuse the one already on your board if replacing an existing heater cartridge.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePower : \u003cstrong\u003e40W 24V\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is ONLY compatible with Prusa i3 MK3 \/ MK3S \/ MK3S+\u003c\/p\u003e"}

E3D Heater Cartridge 24V for Prusa i3 MK3/S/+

$11.99

Replacement heater cartridge. Fully wired and ready to be installed. The heater cartridge is ready to fit to a Molex 0395300002 connector (not included, see accessories); you can reuse the one already on your board if replacing an existing heater cartridge. Power : 40W 24V It is ONLY compatible with Prusa i3 MK3 / MK3S / MK3S+

Bed Thermistor for Prusa i3 MK2 and MK3 - Voxel Factory -3D printer- Imprimante 3D

Heatbed Thermistor for Prusa i3 MK2 and MK3

IN STOCK: 7

$7.94

{"id":760333434998,"title":"Heatbed Thermistor for Prusa i3 MK2 and MK3","handle":"replacement-bed-thermistor-for-prusa-i3-mk3","description":"\u003cp\u003e\u003cspan\u003eReplacement heatbed thermistor set for the \u003c\/span\u003e\u003cstrong\u003eOriginal Prusa MK2\/S, MK2.5\/S,\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eMK3\/S\/+\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003eand \u003c\/span\u003e\u003cstrong\u003eMINI\/+\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis product includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeatbed thermistor (1 pcs)\u003c\/li\u003e\n\u003cli\u003eKapton tape (1 pcs)\u003c\/li\u003e\n\u003cli\u003eAluminum tape (1 pcs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConnector: Molex 5057-9402\u003c\/li\u003e\n\u003cli\u003eCable length: 650 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTo correctly install this replacement part, visit the Prusa Research knowledge base at \u003cspan style=\"text-decoration: underline;\"\u003e\u003ca href=\"https:\/\/help.prusa3d.com\/\"\u003ehelp.prusa3d.com\u003c\/a\u003e\u003c\/span\u003e, select your specific printer model, and follow the instructions provided in the repair manual.\u003c\/p\u003e","published_at":"2017-12-13T14:22:44-05:00","created_at":"2018-04-24T14:17:29-04:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":["MINI","MINI-Plus","MK2","MK2.5","MK2.5S","MK2S","MK3","MK3S","MK3S-Plus"],"price":794,"price_min":794,"price_max":794,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":8128603160694,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-THR-BED-MK3-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Heatbed Thermistor for Prusa i3 MK2 and MK3","public_title":null,"options":["Default Title"],"price":794,"weight":100,"compare_at_price":null,"inventory_quantity":7,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-replacement-bed-thermistor-for-prusa-i3-mk3-1_1400x_32b3e6ed-cb81-41fc-b94e-4c1ccc570709.jpg?v=1739809040"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-replacement-bed-thermistor-for-prusa-i3-mk3-1_1400x_32b3e6ed-cb81-41fc-b94e-4c1ccc570709.jpg?v=1739809040","options":["Title"],"media":[{"alt":"Bed Thermistor for Prusa i3 MK2 and MK3 - Voxel Factory -3D printer- Imprimante 3D","id":29022054056172,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-replacement-bed-thermistor-for-prusa-i3-mk3-1_1400x_32b3e6ed-cb81-41fc-b94e-4c1ccc570709.jpg?v=1739809040"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-replacement-bed-thermistor-for-prusa-i3-mk3-1_1400x_32b3e6ed-cb81-41fc-b94e-4c1ccc570709.jpg?v=1739809040","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003eReplacement heatbed thermistor set for the \u003c\/span\u003e\u003cstrong\u003eOriginal Prusa MK2\/S, MK2.5\/S,\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eMK3\/S\/+\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003eand \u003c\/span\u003e\u003cstrong\u003eMINI\/+\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis product includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeatbed thermistor (1 pcs)\u003c\/li\u003e\n\u003cli\u003eKapton tape (1 pcs)\u003c\/li\u003e\n\u003cli\u003eAluminum tape (1 pcs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConnector: Molex 5057-9402\u003c\/li\u003e\n\u003cli\u003eCable length: 650 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTo correctly install this replacement part, visit the Prusa Research knowledge base at \u003cspan style=\"text-decoration: underline;\"\u003e\u003ca href=\"https:\/\/help.prusa3d.com\/\"\u003ehelp.prusa3d.com\u003c\/a\u003e\u003c\/span\u003e, select your specific printer model, and follow the instructions provided in the repair manual.\u003c\/p\u003e"}

Heatbed Thermistor for Prusa i3 MK2 and MK3

$7.94

Replacement heatbed thermistor set for the Original Prusa MK2/S, MK2.5/S, MK3/S/+ and MINI/+ This product includes: Heatbed thermistor (1 pcs) Kapton tape (1 pcs) Aluminum tape (1 pcs) Specifications: Connector: Molex 5057-9402 Cable length: 650 mm To correctly install this replacement part, visit the Prusa Research knowledge base at hel...

Materio3D Regular PLA 4043D - 1.75mm 1kg

IN STOCK: 4

$24.99

{"id":7661013500140,"title":"Materio3D Regular PLA 4043D - 1.75mm 1kg","handle":"materio3d-regular-pla-4043d-1-75mm-1kg","description":"\u003cdiv align=\"justify\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eMeet the new Materio3D Regular PLA filament!\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eMaterio3D's Regular PLA works well and demonstrates all the typical characteristics of PLA.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e- It prints exceptionally well and the final print result is of high quality.\u003cbr\u003e- This filament is stiff but a little more brittle than Materio3D's Tough PLA. \u003cbr\u003e- It is the most economical filament in the PLA range from Materio3D!\u003cbr\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eEasy-of-use for great prints, every time!\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eDiameter :\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e1.75\u003c\/strong\u003e\u003cstrong data-mce-fragment=\"1\"\u003emm\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eColor :\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eLava Rock \u003c\/strong\u003e\u003cb data-mce-fragment=\"1\"\u003eBlack, Cold White, Lunar Grey, Lemon Yellow and Dragon Red\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAll Materio3D filaments are manufactured in Saint-Hubert, Québec, inside the brand new store of Voxel Factory. The Materio3D Regular PLA is made with NatureWorks 4043D.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem\u003ePlease note : when using a palette system, such as the\u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/mosaic-manufacturing-3d-printers-and-add-on\/products\/mosaic-manufacturing-palette-3-pro\" target=\"_blank\"\u003e Mosaic Manufacturing Palette 3 PRO\u003c\/a\u003e, we recommend to use \u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/materio3d\/products\/materio3d-tough-pla-3d870-1-75mm-1kg\" target=\"_blank\"\u003eMaterio3D's Tough PLA 3D870\u003c\/a\u003e filament instead.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003eCompatibility\u003c\/h5\u003e\n\u003cspan style=\"color: #000000;\"\u003eCompatible with :\u003c\/span\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e- Prusa MK3\/MK3S\/\u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/3d-printers\/products\/original-prusa-i3-mk3s-plus-diy-kit\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.voxelfactory.com\/collections\/3d-printers\/products\/original-prusa-i3-mk3s-plus-diy-kit\" target=\"_blank\"\u003eMK3S+\u003c\/a\u003e and Prusa Mini\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e-\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/3d-printers\/products\/sindoh-single-extruder-3d-printer\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.voxelfactory.com\/collections\/3d-printers\/products\/sindoh-single-extruder-3d-printer\" target=\"_blank\"\u003eSindoh 3DWOX1\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eand\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/3d-printers\/products\/sindoh-3dwox2x-dual-extrusion\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.voxelfactory.com\/collections\/3d-printers\/products\/sindoh-3dwox2x-dual-extrusion\" target=\"_blank\"\u003eSindoh 3DWOX 2X\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv align=\"justify\"\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003eSpecs\u003c\/h5\u003e\n\u003cspan data-mce-fragment=\"1\"\u003eMatérial: \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNatureWorks Ingeo 4043D PLA\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eVendor: \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003eMaterio3D\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eDiameter Tolerance: \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e±\u003c\/span\u003e0.03mm\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eQuantity: \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e1kg\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eDensity:\u003c\/span\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003ePrinting Tips\u003c\/h5\u003e\n\u003cspan data-mce-fragment=\"1\"\u003ePrint temp: \u003cstrong\u003e190\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e°C - 230°C\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eNozzle: \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003eany size\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ePrint speed: \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e30mm\/s to 100+\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eRetraction: \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003echeck your printer documentation!\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eHot print bed: \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e50°C - 70°C\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eCold print bed: \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003eyes\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e(use \u003c\/span\u003e\u003ca title=\"3M #2090 Blue Painter's Tape 48mm x 54.8m roll\" href=\"https:\/\/voxelfactory.myshopify.com\/collections\/tools\/products\/3m-2090-scotch-blue-painters-tape-48mm-x-54-8m\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/voxelfactory.myshopify.com\/collections\/tools\/products\/3m-2090-scotch-blue-painters-tape-48mm-x-54-8m\" target=\"_blank\"\u003e3M #2090\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e and\/or \u003c\/span\u003e\u003ca title=\"3DLac\" href=\"https:\/\/voxelfactory.myshopify.com\/collections\/tools\/products\/3dlac-tapes-replacement-to-make-abs-pla-and-_xt-stick-properly-to-heated-glass\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/voxelfactory.myshopify.com\/collections\/tools\/products\/3dlac-tapes-replacement-to-make-abs-pla-and-_xt-stick-properly-to-heated-glass\" target=\"_blank\"\u003e3DLac\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e)\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ePost processing: \u003cb\u003e-\u003c\/b\u003e\u003c\/span\u003e\n\u003c\/div\u003e","published_at":"2022-06-08T16:55:42-04:00","created_at":"2022-06-08T08:59:47-04:00","vendor":"Materio3D","type":"Materio3D 1.75 Filaments","tags":[],"price":2499,"price_min":2499,"price_max":2499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":42857284862188,"title":"Lava Rock Black","option1":"Lava Rock Black","option2":null,"option3":null,"sku":"M3D-RPL-175-BLK-1KG","requires_shipping":true,"taxable":true,"featured_image":{"id":37157989286124,"product_id":7661013500140,"position":2,"created_at":"2022-06-08T16:51:03-04:00","updated_at":"2025-02-17T11:33:59-05:00","alt":"Materio3D Regular PLA 4043D - 1.75mm 1kg - Voxel Factory -3D printer- Imprimante 3D","width":1400,"height":1050,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PLA-4043D-Lava-Rock-Black.jpg?v=1739810039","variant_ids":[42857284862188]},"available":false,"name":"Materio3D Regular PLA 4043D - 1.75mm 1kg - Lava Rock Black","public_title":"Lava Rock Black","options":["Lava Rock Black"],"price":2499,"weight":1500,"compare_at_price":null,"inventory_quantity":-12,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","featured_media":{"alt":"Materio3D Regular PLA 4043D - 1.75mm 1kg - Voxel Factory -3D printer- Imprimante 3D","id":29736110096620,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PLA-4043D-Lava-Rock-Black.jpg?v=1739810039"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":42857284894956,"title":"Cold White","option1":"Cold White","option2":null,"option3":null,"sku":"M3D-RPL-175-WHT-1KG","requires_shipping":true,"taxable":true,"featured_image":{"id":37157989744876,"product_id":7661013500140,"position":3,"created_at":"2022-06-08T16:51:17-04:00","updated_at":"2025-02-17T11:34:01-05:00","alt":"Materio3D Regular PLA 4043D - 1.75mm 1kg - Voxel Factory -3D printer- Imprimante 3D","width":1400,"height":1050,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PLA-4043D-Cold-White.jpg?v=1739810041","variant_ids":[42857284894956]},"available":true,"name":"Materio3D Regular PLA 4043D - 1.75mm 1kg - Cold White","public_title":"Cold White","options":["Cold White"],"price":2499,"weight":1500,"compare_at_price":null,"inventory_quantity":4,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","featured_media":{"alt":"Materio3D Regular PLA 4043D - 1.75mm 1kg - Voxel Factory -3D printer- Imprimante 3D","id":29736110588140,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PLA-4043D-Cold-White.jpg?v=1739810041"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43294720819436,"title":"Lunar Grey","option1":"Lunar Grey","option2":null,"option3":null,"sku":"M3D-RPL-175-LUN-1KG","requires_shipping":true,"taxable":true,"featured_image":{"id":37806357053676,"product_id":7661013500140,"position":4,"created_at":"2022-09-22T15:50:35-04:00","updated_at":"2025-02-17T11:34:02-05:00","alt":"Materio3D Regular PLA 4043D - 1.75mm 1kg - Voxel Factory -3D printer- Imprimante 3D","width":1400,"height":1050,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PLA-4043D-Lunar-Grey.jpg?v=1739810042","variant_ids":[43294720819436]},"available":false,"name":"Materio3D Regular PLA 4043D - 1.75mm 1kg - Lunar Grey","public_title":"Lunar Grey","options":["Lunar Grey"],"price":2499,"weight":1500,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","featured_media":{"alt":"Materio3D Regular PLA 4043D - 1.75mm 1kg - Voxel Factory -3D printer- Imprimante 3D","id":30442305028332,"position":4,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PLA-4043D-Lunar-Grey.jpg?v=1739810042"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43294720852204,"title":"Lemon Yellow","option1":"Lemon Yellow","option2":null,"option3":null,"sku":"M3D-RPL-175-LEM-1KG","requires_shipping":true,"taxable":true,"featured_image":{"id":37806357381356,"product_id":7661013500140,"position":5,"created_at":"2022-09-22T15:50:52-04:00","updated_at":"2025-02-17T11:34:02-05:00","alt":"Materio3D Regular PLA 4043D - 1.75mm 1kg - Voxel Factory -3D printer- Imprimante 3D","width":1400,"height":1050,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PLA-4043D-Lemon-Yellow.jpg?v=1739810042","variant_ids":[43294720852204]},"available":false,"name":"Materio3D Regular PLA 4043D - 1.75mm 1kg - Lemon Yellow","public_title":"Lemon Yellow","options":["Lemon Yellow"],"price":2499,"weight":1500,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","featured_media":{"alt":"Materio3D Regular PLA 4043D - 1.75mm 1kg - Voxel Factory -3D printer- Imprimante 3D","id":30442305421548,"position":5,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PLA-4043D-Lemon-Yellow.jpg?v=1739810042"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43296220053740,"title":"Dragon Red","option1":"Dragon Red","option2":null,"option3":null,"sku":"M3D-RPL-175-DRA-1KG","requires_shipping":true,"taxable":true,"featured_image":{"id":37834949787884,"product_id":7661013500140,"position":6,"created_at":"2022-09-27T12:03:47-04:00","updated_at":"2025-02-17T11:34:04-05:00","alt":"Materio3D Regular PLA 4043D - 1.75mm 1kg - Voxel Factory -3D printer- Imprimante 3D","width":1400,"height":1050,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PLA-4043D-Dragon-Red.jpg?v=1739810044","variant_ids":[43296220053740]},"available":false,"name":"Materio3D Regular PLA 4043D - 1.75mm 1kg - Dragon Red","public_title":"Dragon Red","options":["Dragon Red"],"price":2499,"weight":1500,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","featured_media":{"alt":"Materio3D Regular PLA 4043D - 1.75mm 1kg - Voxel Factory -3D printer- Imprimante 3D","id":30473903964396,"position":6,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PLA-4043D-Dragon-Red.jpg?v=1739810044"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/products\/Materio3D-PLA-4043D-175mm-1kg-COLLECTION-2.jpg?v=1739810038","\/\/www.voxelfactory.com\/cdn\/shop\/products\/PLA-4043D-Lava-Rock-Black.jpg?v=1739810039","\/\/www.voxelfactory.com\/cdn\/shop\/products\/PLA-4043D-Cold-White.jpg?v=1739810041","\/\/www.voxelfactory.com\/cdn\/shop\/products\/PLA-4043D-Lunar-Grey.jpg?v=1739810042","\/\/www.voxelfactory.com\/cdn\/shop\/products\/PLA-4043D-Lemon-Yellow.jpg?v=1739810042","\/\/www.voxelfactory.com\/cdn\/shop\/products\/PLA-4043D-Dragon-Red.jpg?v=1739810044"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/Materio3D-PLA-4043D-175mm-1kg-COLLECTION-2.jpg?v=1739810038","options":["Color"],"media":[{"alt":"Materio3D Regular PLA 4043D - 1.75mm 1kg - Voxel Factory -3D printer- Imprimante 3D","id":30473900556524,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/Materio3D-PLA-4043D-175mm-1kg-COLLECTION-2.jpg?v=1739810038"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/Materio3D-PLA-4043D-175mm-1kg-COLLECTION-2.jpg?v=1739810038","width":1400},{"alt":"Materio3D Regular PLA 4043D - 1.75mm 1kg - Voxel Factory -3D printer- Imprimante 3D","id":29736110096620,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PLA-4043D-Lava-Rock-Black.jpg?v=1739810039"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PLA-4043D-Lava-Rock-Black.jpg?v=1739810039","width":1400},{"alt":"Materio3D Regular PLA 4043D - 1.75mm 1kg - Voxel Factory -3D printer- Imprimante 3D","id":29736110588140,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PLA-4043D-Cold-White.jpg?v=1739810041"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PLA-4043D-Cold-White.jpg?v=1739810041","width":1400},{"alt":"Materio3D Regular PLA 4043D - 1.75mm 1kg - Voxel Factory -3D printer- Imprimante 3D","id":30442305028332,"position":4,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PLA-4043D-Lunar-Grey.jpg?v=1739810042"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PLA-4043D-Lunar-Grey.jpg?v=1739810042","width":1400},{"alt":"Materio3D Regular PLA 4043D - 1.75mm 1kg - Voxel Factory -3D printer- Imprimante 3D","id":30442305421548,"position":5,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PLA-4043D-Lemon-Yellow.jpg?v=1739810042"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PLA-4043D-Lemon-Yellow.jpg?v=1739810042","width":1400},{"alt":"Materio3D Regular PLA 4043D - 1.75mm 1kg - Voxel Factory -3D printer- Imprimante 3D","id":30473903964396,"position":6,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PLA-4043D-Dragon-Red.jpg?v=1739810044"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/PLA-4043D-Dragon-Red.jpg?v=1739810044","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv align=\"justify\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eMeet the new Materio3D Regular PLA filament!\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eMaterio3D's Regular PLA works well and demonstrates all the typical characteristics of PLA.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e- It prints exceptionally well and the final print result is of high quality.\u003cbr\u003e- This filament is stiff but a little more brittle than Materio3D's Tough PLA. \u003cbr\u003e- It is the most economical filament in the PLA range from Materio3D!\u003cbr\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eEasy-of-use for great prints, every time!\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eDiameter :\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e1.75\u003c\/strong\u003e\u003cstrong data-mce-fragment=\"1\"\u003emm\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eColor :\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eLava Rock \u003c\/strong\u003e\u003cb data-mce-fragment=\"1\"\u003eBlack, Cold White, Lunar Grey, Lemon Yellow and Dragon Red\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAll Materio3D filaments are manufactured in Saint-Hubert, Québec, inside the brand new store of Voxel Factory. The Materio3D Regular PLA is made with NatureWorks 4043D.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem\u003ePlease note : when using a palette system, such as the\u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/mosaic-manufacturing-3d-printers-and-add-on\/products\/mosaic-manufacturing-palette-3-pro\" target=\"_blank\"\u003e Mosaic Manufacturing Palette 3 PRO\u003c\/a\u003e, we recommend to use \u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/materio3d\/products\/materio3d-tough-pla-3d870-1-75mm-1kg\" target=\"_blank\"\u003eMaterio3D's Tough PLA 3D870\u003c\/a\u003e filament instead.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003eCompatibility\u003c\/h5\u003e\n\u003cspan style=\"color: #000000;\"\u003eCompatible with :\u003c\/span\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e- Prusa MK3\/MK3S\/\u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/3d-printers\/products\/original-prusa-i3-mk3s-plus-diy-kit\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.voxelfactory.com\/collections\/3d-printers\/products\/original-prusa-i3-mk3s-plus-diy-kit\" target=\"_blank\"\u003eMK3S+\u003c\/a\u003e and Prusa Mini\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e-\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/3d-printers\/products\/sindoh-single-extruder-3d-printer\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.voxelfactory.com\/collections\/3d-printers\/products\/sindoh-single-extruder-3d-printer\" target=\"_blank\"\u003eSindoh 3DWOX1\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eand\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/3d-printers\/products\/sindoh-3dwox2x-dual-extrusion\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.voxelfactory.com\/collections\/3d-printers\/products\/sindoh-3dwox2x-dual-extrusion\" target=\"_blank\"\u003eSindoh 3DWOX 2X\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv align=\"justify\"\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003eSpecs\u003c\/h5\u003e\n\u003cspan data-mce-fragment=\"1\"\u003eMatérial: \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNatureWorks Ingeo 4043D PLA\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eVendor: \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003eMaterio3D\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eDiameter Tolerance: \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e±\u003c\/span\u003e0.03mm\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eQuantity: \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e1kg\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eDensity:\u003c\/span\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003ePrinting Tips\u003c\/h5\u003e\n\u003cspan data-mce-fragment=\"1\"\u003ePrint temp: \u003cstrong\u003e190\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e°C - 230°C\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eNozzle: \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003eany size\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ePrint speed: \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e30mm\/s to 100+\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eRetraction: \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003echeck your printer documentation!\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eHot print bed: \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e50°C - 70°C\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eCold print bed: \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003eyes\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e(use \u003c\/span\u003e\u003ca title=\"3M #2090 Blue Painter's Tape 48mm x 54.8m roll\" href=\"https:\/\/voxelfactory.myshopify.com\/collections\/tools\/products\/3m-2090-scotch-blue-painters-tape-48mm-x-54-8m\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/voxelfactory.myshopify.com\/collections\/tools\/products\/3m-2090-scotch-blue-painters-tape-48mm-x-54-8m\" target=\"_blank\"\u003e3M #2090\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e and\/or \u003c\/span\u003e\u003ca title=\"3DLac\" href=\"https:\/\/voxelfactory.myshopify.com\/collections\/tools\/products\/3dlac-tapes-replacement-to-make-abs-pla-and-_xt-stick-properly-to-heated-glass\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/voxelfactory.myshopify.com\/collections\/tools\/products\/3dlac-tapes-replacement-to-make-abs-pla-and-_xt-stick-properly-to-heated-glass\" target=\"_blank\"\u003e3DLac\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e)\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ePost processing: \u003cb\u003e-\u003c\/b\u003e\u003c\/span\u003e\n\u003c\/div\u003e"}

Materio3D Regular PLA 4043D - 1.75mm 1kg

$24.99

Meet the new Materio3D Regular PLA filament! Materio3D's Regular PLA works well and demonstrates all the typical characteristics of PLA. - It prints exceptionally well and the final print result is of high quality.- This filament is stiff but a little more brittle than Materio3D's Tough PLA. - It is the most economical filament in the PLA range...

Color