Original E3D v6.1 24V Hotend for Prusa i3 MK3

{"id":8976341729516,"title":"Smooth PEI Print sheet [MK3|MK4|CORE One]","handle":"mk4-mk3-core-one-smooth-pei-print-sheet","description":"\u003cp\u003e\u003cstrong\u003eUpdate:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe steel sheet color may differ from the product picture (black, gold, green, etc). The smooth PEI surface on the steel sheet, as well as all other properties, remain the very same for all color versions.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe MK52 heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets. \u003c\/span\u003eThe Spring Steel Sheet With Smooth Double-sided PEI uses the same PEI sheets as on the MK2\/S. It is the best solution for printing PLA and it has great adhesion with almost all materials. The bottom of your prints will be smooth.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eYou can leave small marks on the print surface with your nozzle or tools, they will typically be shinier than the rest. It does not affect functionality or adhesion. However, if you want to have the same surface look on the whole printbed you can resurface it. The easiest way is to take the hard side of a dry kitchen sponge and wipe the affected area with a circular motion gently a few times.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFind more details about the spring steel sheets in our \u003ca href=\"https:\/\/help.prusa3d.com\/en\/article\/flexible-steel-sheets_2195\"\u003eknowledgebase\u003c\/a\u003e.\u003c\/span\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eConsumable parts, such as PEI sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTiny dots may appear on the PEI-Ultem steel sheet surface. These can slightly affect the finished print bottom surface. However, they do not impact the printing process, reliability in any way. We do not consider these dots a reason for a warranty claim.\u003c\/p\u003e\n\u003ch3 class=\"sc-2ebcaf2d-0 kJYTzT\"\u003eBasic Attributes\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x: auto;\"\u003e\n\u003ctable class=\"responsive-table\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: auto;\"\u003e\n\u003ctd style=\"color: green; font-size: 305%; width: auto; height: auto;\"\u003e+\u003c\/td\u003e\n\u003ctd style=\"width: auto; height: auto;\"\u003e\u003cspan\u003ePerfect for PLA\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"color: red; font-size: 305%; width: auto; height: auto;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"width: 46.2081%; height: auto;\"\u003e\u003cspan\u003eDo not clean with IPA before PETG\u003cbr\u003eRelease agent might be necessary\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: auto;\"\u003e\n\u003ctd style=\"color: green; font-size: 305%; width: auto; height: auto;\"\u003e+\u003c\/td\u003e\n\u003ctd style=\"width: 32.4515%; height: auto;\"\u003e\u003cspan\u003eGreat adhesion with almost all materials\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"color: red; font-size: 305%; width: auto; height: auto;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"width: 46.2081%; height: auto;\"\u003e\u003cspan\u003eYou must apply glue stick when printing Flex\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: auto;\"\u003e\n\u003ctd style=\"color: green; font-size: 305%; width: auto; height: auto;\"\u003e+\u003c\/td\u003e\n\u003ctd style=\"width: 32.4515%; height: auto;\"\u003e\u003cspan\u003eSmooth bottom of prints\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: auto;\"\u003e\n\u003ctd style=\"color: green; font-size: 305%; width: auto; height: auto;\"\u003e+\u003c\/td\u003e\n\u003ctd style=\"width: 32.4515%; height: auto;\"\u003e\u003cspan\u003eTiny details will stick great\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2025-07-27T14:23:58-04:00","created_at":"2025-07-27T14:13:50-04:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":["CORE One","MK3","MK3S","MK4","MK4S"],"price":4899,"price_min":4899,"price_max":4899,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":46695254753516,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-SHT-SMT-MKX-CR1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Smooth PEI Print sheet [MK3|MK4|CORE One]","public_title":null,"options":["Default Title"],"price":4899,"weight":350,"compare_at_price":null,"inventory_quantity":37,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_MK4_Smooth_PEI_Print_Sheet_Product_Picture.webp?v=1753640568"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_MK4_Smooth_PEI_Print_Sheet_Product_Picture.webp?v=1753640568","options":["Title"],"media":[{"alt":"Prusa MK4 Smooth PEI Print Sheet Product Picture","id":35738760937708,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_MK4_Smooth_PEI_Print_Sheet_Product_Picture.webp?v=1753640568"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_MK4_Smooth_PEI_Print_Sheet_Product_Picture.webp?v=1753640568","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eUpdate:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe steel sheet color may differ from the product picture (black, gold, green, etc). The smooth PEI surface on the steel sheet, as well as all other properties, remain the very same for all color versions.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe MK52 heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets. \u003c\/span\u003eThe Spring Steel Sheet With Smooth Double-sided PEI uses the same PEI sheets as on the MK2\/S. It is the best solution for printing PLA and it has great adhesion with almost all materials. The bottom of your prints will be smooth.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eYou can leave small marks on the print surface with your nozzle or tools, they will typically be shinier than the rest. It does not affect functionality or adhesion. However, if you want to have the same surface look on the whole printbed you can resurface it. The easiest way is to take the hard side of a dry kitchen sponge and wipe the affected area with a circular motion gently a few times.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFind more details about the spring steel sheets in our \u003ca href=\"https:\/\/help.prusa3d.com\/en\/article\/flexible-steel-sheets_2195\"\u003eknowledgebase\u003c\/a\u003e.\u003c\/span\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eConsumable parts, such as PEI sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTiny dots may appear on the PEI-Ultem steel sheet surface. These can slightly affect the finished print bottom surface. However, they do not impact the printing process, reliability in any way. We do not consider these dots a reason for a warranty claim.\u003c\/p\u003e\n\u003ch3 class=\"sc-2ebcaf2d-0 kJYTzT\"\u003eBasic Attributes\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x: auto;\"\u003e\n\u003ctable class=\"responsive-table\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: auto;\"\u003e\n\u003ctd style=\"color: green; font-size: 305%; width: auto; height: auto;\"\u003e+\u003c\/td\u003e\n\u003ctd style=\"width: auto; height: auto;\"\u003e\u003cspan\u003ePerfect for PLA\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"color: red; font-size: 305%; width: auto; height: auto;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"width: 46.2081%; height: auto;\"\u003e\u003cspan\u003eDo not clean with IPA before PETG\u003cbr\u003eRelease agent might be necessary\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: auto;\"\u003e\n\u003ctd style=\"color: green; font-size: 305%; width: auto; height: auto;\"\u003e+\u003c\/td\u003e\n\u003ctd style=\"width: 32.4515%; height: auto;\"\u003e\u003cspan\u003eGreat adhesion with almost all materials\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"color: red; font-size: 305%; width: auto; height: auto;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"width: 46.2081%; height: auto;\"\u003e\u003cspan\u003eYou must apply glue stick when printing Flex\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: auto;\"\u003e\n\u003ctd style=\"color: green; font-size: 305%; width: auto; height: auto;\"\u003e+\u003c\/td\u003e\n\u003ctd style=\"width: 32.4515%; height: auto;\"\u003e\u003cspan\u003eSmooth bottom of prints\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: auto;\"\u003e\n\u003ctd style=\"color: green; font-size: 305%; width: auto; height: auto;\"\u003e+\u003c\/td\u003e\n\u003ctd style=\"width: 32.4515%; height: auto;\"\u003e\u003cspan\u003eTiny details will stick great\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e"}

{"id":8976343433452,"title":"Textured Powder-coated Print Sheet [MK3|MK4]","handle":"mk4-mk3-textured-powder-coated-print-sheet","description":"\u003cp\u003e\u003cstrong\u003eOVERVIEW:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe MK52 heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePowder coating directly on metal makes it very hard to damage this build plate. If a heated nozzle crashed into it, the metal can dissipate the heat. Powder coating also gives the surface a distinct textured look that will be visible on your prints. The textured surface hides most of the mechanical damage caused by tools. Only the top of the small bumps can be scratched, which will not imprint on the bottom of the model. This surface is used on our print farm, look at the printed parts you have on your printer for reference.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eFind more details about the spring steel sheets in our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/help.prusa3d.com\/article\/WPL74Wx4aU-steel-sheets\"\u003eknowledgebase\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNever clean the Textured PEI Powder-coated spring steel sheet with acetone! Doing so will create microfractures in the PEI texture, which will make the surface deteriorate over time. Learn more about printing on the Textured PEI Powder coated steel sheet on our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/blog.prusaprinters.org\/how-to-print-on-a-powder-coated-sheet\/\"\u003eBlog\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eConsumable parts, such as PEI sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3 class=\"sc-2ebcaf2d-0 kJYTzT\"\u003eBasic Attributes\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x: auto;\"\u003e\n\u003ctable class=\"responsive-table\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: auto;\"\u003e\n\u003ctd style=\"color: green; font-size: 305%; width: auto; height: auto;\"\u003e+\u003c\/td\u003e\n\u003ctd style=\"width: auto; height: auto;\"\u003e\u003cspan\u003eScratchproof, hard to damage\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"color: red; font-size: 305%; width: auto; height: auto;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"width: 46.2081%; height: auto;\"\u003e\u003cspan\u003ePLA prints with a small contact area may need a brim\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: auto;\"\u003e\n\u003ctd style=\"color: green; font-size: 305%; width: auto; height: auto;\"\u003e+\u003c\/td\u003e\n\u003ctd style=\"width: 32.4515%; height: auto;\"\u003e\u003cspan\u003eTransfers texture to prints\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"color: red; font-size: 305%; width: auto; height: auto;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"width: 46.2081%; height: auto;\"\u003e\u003cspan\u003ePLA prints with a huge footprint may warp\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: auto;\"\u003e\n\u003ctd style=\"color: green; font-size: 305%; width: auto; height: auto;\"\u003e+\u003c\/td\u003e\n\u003ctd style=\"width: 32.4515%; height: auto;\"\u003e\u003cspan\u003ePrints automatically detach after sheet cools down\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"color: red; font-size: 305%; width: auto; height: auto;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"width: 46.2081%; height: auto;\"\u003e\u003cspan\u003eNever clean with acetone\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: auto;\"\u003e\n\u003ctd style=\"color: green; font-size: 305%; width: auto; height: auto;\"\u003e+\u003c\/td\u003e\n\u003ctd style=\"width: 32.4515%; height: auto;\"\u003e\u003cspan\u003eNo need for glue stick for PETG\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2025-07-27T14:32:57-04:00","created_at":"2025-07-27T14:27:41-04:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":["MK2","MK2.5","MK2.5S","MK2S","MK3","MK3.5","MK3S","MK4S"],"price":5599,"price_min":5599,"price_max":5599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":46695266746604,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-SHT-TXT-MKX-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Textured Powder-coated Print Sheet [MK3|MK4]","public_title":null,"options":["Default Title"],"price":5599,"weight":350,"compare_at_price":null,"inventory_quantity":60,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_MK4_Textured_Powder-coated_Print_Sheet_Product_Picture.webp?v=1753641130"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_MK4_Textured_Powder-coated_Print_Sheet_Product_Picture.webp?v=1753641130","options":["Title"],"media":[{"alt":"Prusa MK4 Textured Powder-coated Print Sheet Product Picture","id":35738769883372,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_MK4_Textured_Powder-coated_Print_Sheet_Product_Picture.webp?v=1753641130"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_MK4_Textured_Powder-coated_Print_Sheet_Product_Picture.webp?v=1753641130","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eOVERVIEW:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe MK52 heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePowder coating directly on metal makes it very hard to damage this build plate. If a heated nozzle crashed into it, the metal can dissipate the heat. Powder coating also gives the surface a distinct textured look that will be visible on your prints. The textured surface hides most of the mechanical damage caused by tools. Only the top of the small bumps can be scratched, which will not imprint on the bottom of the model. This surface is used on our print farm, look at the printed parts you have on your printer for reference.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eFind more details about the spring steel sheets in our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/help.prusa3d.com\/article\/WPL74Wx4aU-steel-sheets\"\u003eknowledgebase\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNever clean the Textured PEI Powder-coated spring steel sheet with acetone! Doing so will create microfractures in the PEI texture, which will make the surface deteriorate over time. Learn more about printing on the Textured PEI Powder coated steel sheet on our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/blog.prusaprinters.org\/how-to-print-on-a-powder-coated-sheet\/\"\u003eBlog\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eConsumable parts, such as PEI sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3 class=\"sc-2ebcaf2d-0 kJYTzT\"\u003eBasic Attributes\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x: auto;\"\u003e\n\u003ctable class=\"responsive-table\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: auto;\"\u003e\n\u003ctd style=\"color: green; font-size: 305%; width: auto; height: auto;\"\u003e+\u003c\/td\u003e\n\u003ctd style=\"width: auto; height: auto;\"\u003e\u003cspan\u003eScratchproof, hard to damage\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"color: red; font-size: 305%; width: auto; height: auto;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"width: 46.2081%; height: auto;\"\u003e\u003cspan\u003ePLA prints with a small contact area may need a brim\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: auto;\"\u003e\n\u003ctd style=\"color: green; font-size: 305%; width: auto; height: auto;\"\u003e+\u003c\/td\u003e\n\u003ctd style=\"width: 32.4515%; height: auto;\"\u003e\u003cspan\u003eTransfers texture to prints\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"color: red; font-size: 305%; width: auto; height: auto;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"width: 46.2081%; height: auto;\"\u003e\u003cspan\u003ePLA prints with a huge footprint may warp\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: auto;\"\u003e\n\u003ctd style=\"color: green; font-size: 305%; width: auto; height: auto;\"\u003e+\u003c\/td\u003e\n\u003ctd style=\"width: 32.4515%; height: auto;\"\u003e\u003cspan\u003ePrints automatically detach after sheet cools down\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"color: red; font-size: 305%; width: auto; height: auto;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"width: 46.2081%; height: auto;\"\u003e\u003cspan\u003eNever clean with acetone\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: auto;\"\u003e\n\u003ctd style=\"color: green; font-size: 305%; width: auto; height: auto;\"\u003e+\u003c\/td\u003e\n\u003ctd style=\"width: 32.4515%; height: auto;\"\u003e\u003cspan\u003eNo need for glue stick for PETG\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e"}

{"id":8976346841324,"title":"Satin Powder-coated Print Sheet [MK3|MK4]","handle":"mk4-mk3-satin-powder-coated-print-sheet","description":"\u003cp\u003e\u003cstrong\u003eOVERVIEW:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe MK52 heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Satin sheet further expands our line-up of print sheets. In terms of printing properties, the Satin sheet sits between the smooth and textured variants. Its powder-coated surface with lightly textured matte finish offers an optimal level of adhesion, especially when printing PLA and PETG materials. It is fully compatible with a wide range of common and less-common filaments, such as ABS, ASA, FlexFill 98A, Polycarbonate and more. A vast majority of materials can be printed without a separation layer (e.g. glue).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePolycarbonate - prints better on satin (compared to smooth and textured sheets) - when printing with PC often, glue stick layer is recommended to prevent possible damage to the sheet.\u003c\/p\u003e\n\u003cp\u003eFind more details about the spring steel sheets (including usage and maintenance instructions) in our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/help.prusa3d.com\/article\/WPL74Wx4aU-steel-sheets\"\u003eknowledge base\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNever clean the Satin powder-coated spring steel sheet with acetone! Doing so will create microfractures in the texture, which will make the surface deteriorate over time. Learn more about printing on the Satin powder-coated steel sheet in our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/help.prusa3d.com\/en\/article\/flexible-steel-sheets_2195\"\u003eknowledge base\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eConsumable parts, such as PEI sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 class=\"sc-2ebcaf2d-0 kJYTzT\"\u003eBasic Attributes\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x: auto;\"\u003e\n\u003ctable class=\"responsive-table\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: auto;\"\u003e\n\u003ctd style=\"color: green; font-size: 305%; width: auto; height: auto;\"\u003e+\u003c\/td\u003e\n\u003ctd style=\"width: auto; height: auto;\"\u003e\u003cspan\u003eSuitable for both PLA and PETG\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"color: red; font-size: 305%; width: auto; height: auto;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"width: 46.2081%; height: auto;\"\u003e\u003cspan\u003eAcetone causes the surface to quickly deteriorate\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: auto;\"\u003e\n\u003ctd style=\"color: green; font-size: 305%; width: auto; height: auto;\"\u003e+\u003c\/td\u003e\n\u003ctd style=\"width: 32.4515%; height: auto;\"\u003e\u003cspan\u003eLightly textured surface finish\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"color: red; font-size: 305%; width: auto; height: auto;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"width: 46.2081%; height: auto;\"\u003e\u003cspan\u003ePrints from ASA, PC Blend require a brim \/ skirt \/ shield around the print\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: auto;\"\u003e\n\u003ctd style=\"color: green; font-size: 305%; width: auto; height: auto;\"\u003e+\u003c\/td\u003e\n\u003ctd style=\"width: 32.4515%; height: auto;\"\u003e\u003cspan\u003eNo need for glue stick for PETG\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"color: red; font-size: 305%; width: auto; height: auto;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"width: 46.2081%; height: auto;\"\u003e\u003cspan\u003eLive Z value needs to be readjusted if you switch sheets\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: auto;\"\u003e\n\u003ctd style=\"color: green; font-size: 305%; width: auto; height: auto;\"\u003e+\u003c\/td\u003e\n\u003ctd style=\"width: 32.4515%; height: auto;\"\u003e\u003cspan\u003eWide range of supported filaments, including advanced materials, for instance PC Blend\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"color: red; font-size: 305%; width: auto; height: auto;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"width: 46.2081%; height: auto;\"\u003e\u003cspan\u003eDO NOT use sharp metal objects (e.g. a spatula) to remove the print!\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: auto;\"\u003e\n\u003ctd style=\"color: green; font-size: 305%; width: auto; height: auto;\"\u003e+\u003c\/td\u003e\n\u003ctd style=\"width: 32.4515%; height: auto;\"\u003e\u003cspan\u003eEasy maintenance and good adhesion qualities\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2025-07-27T14:55:41-04:00","created_at":"2025-07-27T14:35:49-04:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":["MK2","MK2.5","MK2.5S","MK2S","MK3","MK3.5","MK3S","MK4S"],"price":6599,"price_min":6599,"price_max":6599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":46695274250476,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-SHT-STN-MKX-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Satin Powder-coated Print Sheet [MK3|MK4]","public_title":null,"options":["Default Title"],"price":6599,"weight":350,"compare_at_price":null,"inventory_quantity":30,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_MK4_Satin_Powder-coated_Print_Sheet_Product_Picture.webp?v=1753642507"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_MK4_Satin_Powder-coated_Print_Sheet_Product_Picture.webp?v=1753642507","options":["Title"],"media":[{"alt":"Prusa MK4 Satin Powder coated Print Sheet Product Picture","id":35738786857196,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_MK4_Satin_Powder-coated_Print_Sheet_Product_Picture.webp?v=1753642507"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_MK4_Satin_Powder-coated_Print_Sheet_Product_Picture.webp?v=1753642507","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eOVERVIEW:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe MK52 heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Satin sheet further expands our line-up of print sheets. In terms of printing properties, the Satin sheet sits between the smooth and textured variants. Its powder-coated surface with lightly textured matte finish offers an optimal level of adhesion, especially when printing PLA and PETG materials. It is fully compatible with a wide range of common and less-common filaments, such as ABS, ASA, FlexFill 98A, Polycarbonate and more. A vast majority of materials can be printed without a separation layer (e.g. glue).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePolycarbonate - prints better on satin (compared to smooth and textured sheets) - when printing with PC often, glue stick layer is recommended to prevent possible damage to the sheet.\u003c\/p\u003e\n\u003cp\u003eFind more details about the spring steel sheets (including usage and maintenance instructions) in our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/help.prusa3d.com\/article\/WPL74Wx4aU-steel-sheets\"\u003eknowledge base\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNever clean the Satin powder-coated spring steel sheet with acetone! Doing so will create microfractures in the texture, which will make the surface deteriorate over time. Learn more about printing on the Satin powder-coated steel sheet in our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/help.prusa3d.com\/en\/article\/flexible-steel-sheets_2195\"\u003eknowledge base\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eConsumable parts, such as PEI sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 class=\"sc-2ebcaf2d-0 kJYTzT\"\u003eBasic Attributes\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x: auto;\"\u003e\n\u003ctable class=\"responsive-table\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: auto;\"\u003e\n\u003ctd style=\"color: green; font-size: 305%; width: auto; height: auto;\"\u003e+\u003c\/td\u003e\n\u003ctd style=\"width: auto; height: auto;\"\u003e\u003cspan\u003eSuitable for both PLA and PETG\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"color: red; font-size: 305%; width: auto; height: auto;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"width: 46.2081%; height: auto;\"\u003e\u003cspan\u003eAcetone causes the surface to quickly deteriorate\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: auto;\"\u003e\n\u003ctd style=\"color: green; font-size: 305%; width: auto; height: auto;\"\u003e+\u003c\/td\u003e\n\u003ctd style=\"width: 32.4515%; height: auto;\"\u003e\u003cspan\u003eLightly textured surface finish\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"color: red; font-size: 305%; width: auto; height: auto;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"width: 46.2081%; height: auto;\"\u003e\u003cspan\u003ePrints from ASA, PC Blend require a brim \/ skirt \/ shield around the print\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: auto;\"\u003e\n\u003ctd style=\"color: green; font-size: 305%; width: auto; height: auto;\"\u003e+\u003c\/td\u003e\n\u003ctd style=\"width: 32.4515%; height: auto;\"\u003e\u003cspan\u003eNo need for glue stick for PETG\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"color: red; font-size: 305%; width: auto; height: auto;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"width: 46.2081%; height: auto;\"\u003e\u003cspan\u003eLive Z value needs to be readjusted if you switch sheets\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: auto;\"\u003e\n\u003ctd style=\"color: green; font-size: 305%; width: auto; height: auto;\"\u003e+\u003c\/td\u003e\n\u003ctd style=\"width: 32.4515%; height: auto;\"\u003e\u003cspan\u003eWide range of supported filaments, including advanced materials, for instance PC Blend\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"color: red; font-size: 305%; width: auto; height: auto;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"width: 46.2081%; height: auto;\"\u003e\u003cspan\u003eDO NOT use sharp metal objects (e.g. a spatula) to remove the print!\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: auto;\"\u003e\n\u003ctd style=\"color: green; font-size: 305%; width: auto; height: auto;\"\u003e+\u003c\/td\u003e\n\u003ctd style=\"width: 32.4515%; height: auto;\"\u003e\u003cspan\u003eEasy maintenance and good adhesion qualities\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e"}

{"id":8976341008620,"title":"PA Nylon Powder-coated Print Sheet [MK3|MK4]","handle":"mk4-pa-nylon-powder-coated-print-sheet-1","description":"\u003ch3 class=\"sc-2ebcaf2d-0 kJYTzT\"\u003eOVERVIEW:\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eThe MK52 heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThis print sheet is specially designed to print polyamide-based filaments,\u003c\/strong\u003e\u003cspan\u003e especially the \u003c\/span\u003e\u003ca href=\"https:\/\/www.prusa3d.com\/product\/prusament-pa11-carbon-fiber-black-800g\/\"\u003ePrusament PA11 Carbon Fiber Black.\u003c\/a\u003e\u003cspan\u003e The PA11-type materials have generally a lower adhesion on textured or satin print sheets. This sheet has a special surface finish that increases the adhesion and is perfect for Prusament PA11.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eYou can learn more about the Double-sided Powder-coated PA Nylon Spring Steel Sheet in our \u003c\/span\u003e\u003ca data-color=\"brand\" href=\"https:\/\/help.prusa3d.com\/article\/special-pa-nylon-steel-sheet_341570\"\u003eknowledgebase.\u003c\/a\u003e\u003c\/p\u003e\n\u003ch4 class=\"sc-2ebcaf2d-0 kgZXXq\"\u003eIMPORTANT!\u003c\/h4\u003e\n\u003cp\u003e\u003cspan\u003eThe surface of this sheet should be cleaned only with pure water. \u003c\/span\u003e\u003cstrong\u003eUsing common agents such as IPA or Acetone will lead to a quick deterioration of the surface.\u003c\/strong\u003e\u003cspan\u003e Using a glue stick is no longer required and recommended. To clean grease-coated areas, use clean water with a drop of dishwashing detergent.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 class=\"sc-2ebcaf2d-0 ivhPqN\"\u003eNotes:\u003c\/h3\u003e\n\u003cp\u003eConsumable parts, such as PEI sheets (smooth, textured, nylon, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.\u003cbr\u003e\u003cbr\u003eAs a result of the temperatures to which the plate is exposed during printing, its surface gradually becomes glossier or may develop smaller, duller areas. This visual change does not adversely affect the printing properties and is not considered a reason for a warranty claim.\u003c\/p\u003e\n\u003cp\u003eNote that with the Original Prusa MK4, the PA Nylon sheet wear is especially noticeable at the Z probing points, where the nozzle leaves visible marks on the surface. This does not affect the surface adhesion and overall printability. You can examine the marks in our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/help.prusa3d.com\/article\/special-pa-nylon-steel-sheet_341570\"\u003eknowledgebase article.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eA new batch of the PA Nylon sheet will be released during July \/ August 2024. The new version will get a slightly rougher surface texture. This change will not affect the print sheet's functional properties. You can examine the changes in our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/help.prusa3d.com\/article\/special-pa-nylon-steel-sheet_341570\"\u003eknowledgebase article\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eas well.\u003c\/p\u003e\n\u003ch3 class=\"sc-2ebcaf2d-0 kJYTzT\"\u003eBasic Attributes\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x: auto;\"\u003e\n\u003ctable class=\"responsive-table\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: auto;\"\u003e\n\u003ctd style=\"color: green; font-size: 305%; width: auto; height: auto;\"\u003e+\u003c\/td\u003e\n\u003ctd style=\"width: auto; height: auto;\"\u003e\u003cspan\u003eGreat for polyamide-based materials\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"color: red; font-size: 305%; width: auto; height: auto;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"width: 46.2081%; height: auto;\"\u003e\u003cspan\u003eSuitable only for polyamide-based materials and PETG. Other materials tend to detach mid-print\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: auto;\"\u003e\n\u003ctd style=\"color: green; font-size: 305%; width: auto; height: auto;\"\u003e+\u003c\/td\u003e\n\u003ctd style=\"width: 32.4515%; height: auto;\"\u003e\u003cspan\u003eNo need for a glue stick\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"color: red; font-size: 305%; width: auto; height: auto;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"width: 46.2081%; height: auto;\"\u003e\u003cspan\u003eCan be damaged with IPA and acetone\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: auto;\"\u003e\n\u003ctd style=\"color: green; font-size: 305%; width: auto; height: auto;\"\u003e+\u003c\/td\u003e\n\u003ctd style=\"width: 32.4515%; height: auto;\"\u003e\u003cspan\u003eCan be cleaned just with water\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2025-07-27T14:12:17-04:00","created_at":"2025-07-27T14:05:21-04:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":["MK3","MK3S+","MK4S"],"price":8260,"price_min":8260,"price_max":8260,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":46695253508332,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-SHT-0PA-MKX-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"PA Nylon Powder-coated Print Sheet [MK3|MK4]","public_title":null,"options":["Default Title"],"price":8260,"weight":350,"compare_at_price":null,"inventory_quantity":14,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_MK4_PA_Nylon_Powder-coated_Print_Sheet_Product_Picture.webp?v=1753639890"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_MK4_PA_Nylon_Powder-coated_Print_Sheet_Product_Picture.webp?v=1753639890","options":["Title"],"media":[{"alt":"Prusa MK4 PA Nylon Powder-coated Print Sheet Product Picture","id":35738752942316,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_MK4_PA_Nylon_Powder-coated_Print_Sheet_Product_Picture.webp?v=1753639890"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_MK4_PA_Nylon_Powder-coated_Print_Sheet_Product_Picture.webp?v=1753639890","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3 class=\"sc-2ebcaf2d-0 kJYTzT\"\u003eOVERVIEW:\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eThe MK52 heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThis print sheet is specially designed to print polyamide-based filaments,\u003c\/strong\u003e\u003cspan\u003e especially the \u003c\/span\u003e\u003ca href=\"https:\/\/www.prusa3d.com\/product\/prusament-pa11-carbon-fiber-black-800g\/\"\u003ePrusament PA11 Carbon Fiber Black.\u003c\/a\u003e\u003cspan\u003e The PA11-type materials have generally a lower adhesion on textured or satin print sheets. This sheet has a special surface finish that increases the adhesion and is perfect for Prusament PA11.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eYou can learn more about the Double-sided Powder-coated PA Nylon Spring Steel Sheet in our \u003c\/span\u003e\u003ca data-color=\"brand\" href=\"https:\/\/help.prusa3d.com\/article\/special-pa-nylon-steel-sheet_341570\"\u003eknowledgebase.\u003c\/a\u003e\u003c\/p\u003e\n\u003ch4 class=\"sc-2ebcaf2d-0 kgZXXq\"\u003eIMPORTANT!\u003c\/h4\u003e\n\u003cp\u003e\u003cspan\u003eThe surface of this sheet should be cleaned only with pure water. \u003c\/span\u003e\u003cstrong\u003eUsing common agents such as IPA or Acetone will lead to a quick deterioration of the surface.\u003c\/strong\u003e\u003cspan\u003e Using a glue stick is no longer required and recommended. To clean grease-coated areas, use clean water with a drop of dishwashing detergent.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 class=\"sc-2ebcaf2d-0 ivhPqN\"\u003eNotes:\u003c\/h3\u003e\n\u003cp\u003eConsumable parts, such as PEI sheets (smooth, textured, nylon, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.\u003cbr\u003e\u003cbr\u003eAs a result of the temperatures to which the plate is exposed during printing, its surface gradually becomes glossier or may develop smaller, duller areas. This visual change does not adversely affect the printing properties and is not considered a reason for a warranty claim.\u003c\/p\u003e\n\u003cp\u003eNote that with the Original Prusa MK4, the PA Nylon sheet wear is especially noticeable at the Z probing points, where the nozzle leaves visible marks on the surface. This does not affect the surface adhesion and overall printability. You can examine the marks in our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/help.prusa3d.com\/article\/special-pa-nylon-steel-sheet_341570\"\u003eknowledgebase article.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eA new batch of the PA Nylon sheet will be released during July \/ August 2024. The new version will get a slightly rougher surface texture. This change will not affect the print sheet's functional properties. You can examine the changes in our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/help.prusa3d.com\/article\/special-pa-nylon-steel-sheet_341570\"\u003eknowledgebase article\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eas well.\u003c\/p\u003e\n\u003ch3 class=\"sc-2ebcaf2d-0 kJYTzT\"\u003eBasic Attributes\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x: auto;\"\u003e\n\u003ctable class=\"responsive-table\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: auto;\"\u003e\n\u003ctd style=\"color: green; font-size: 305%; width: auto; height: auto;\"\u003e+\u003c\/td\u003e\n\u003ctd style=\"width: auto; height: auto;\"\u003e\u003cspan\u003eGreat for polyamide-based materials\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"color: red; font-size: 305%; width: auto; height: auto;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"width: 46.2081%; height: auto;\"\u003e\u003cspan\u003eSuitable only for polyamide-based materials and PETG. Other materials tend to detach mid-print\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: auto;\"\u003e\n\u003ctd style=\"color: green; font-size: 305%; width: auto; height: auto;\"\u003e+\u003c\/td\u003e\n\u003ctd style=\"width: 32.4515%; height: auto;\"\u003e\u003cspan\u003eNo need for a glue stick\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"color: red; font-size: 305%; width: auto; height: auto;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"width: 46.2081%; height: auto;\"\u003e\u003cspan\u003eCan be damaged with IPA and acetone\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: auto;\"\u003e\n\u003ctd style=\"color: green; font-size: 305%; width: auto; height: auto;\"\u003e+\u003c\/td\u003e\n\u003ctd style=\"width: 32.4515%; height: auto;\"\u003e\u003cspan\u003eCan be cleaned just with water\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e"}

{"id":8191462025,"title":"Replacement PEI Sheet for Prusa i3 MK2 or MK3","handle":"feuille-pei-pour-prusa-i3-mk2","description":"\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eReplacement PEI sheet for the MK42 or MK52 heatbed.\u003c\/div\u003e\n\u003cdiv\u003eFor instructions on how to replace a damaged PEI sheet on your heatbed, please follow the guide found on the \u003ca href=\"http:\/\/manual.prusa3d.com\/Guide\/Replacing+the+PEI+sheet\/133\" title=\"Replacing the PEI sheet at prusa3d.com\" target=\"_blank\"\u003ePrusa Research website\u003c\/a\u003e.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eIt is ONLY compatible with Prusa i3 MK2 \/ MK2S \/ MK2.5 \/ MK2.5S \/ MK3 \/ MK3S \/ MK3S+\u003c\/div\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e260 x 242 mm\u003c\/li\u003e\n\u003cli\u003e175um thickness\u003c\/li\u003e\n\u003cli\u003e3M 200MP adhesive\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2017-12-13T14:22:44-05:00","created_at":"2016-10-24T14:24:08-04:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":["MK2","MK2S","MK3","MK3S"],"price":1499,"price_min":1499,"price_max":1499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":26899779081,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-PEI-SHE-ET4-MK2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Replacement PEI Sheet for Prusa i3 MK2 or MK3","public_title":null,"options":["Default Title"],"price":1499,"weight":500,"compare_at_price":null,"inventory_quantity":5,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-replacement-pei-sheet-for-prusa-i3-mk2-or-mk3-1_1400x_ce7c33f8-b308-4323-aff8-aa2d1dc7952e.jpg?v=1739808905"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-replacement-pei-sheet-for-prusa-i3-mk2-or-mk3-1_1400x_ce7c33f8-b308-4323-aff8-aa2d1dc7952e.jpg?v=1739808905","options":["Title"],"media":[{"alt":"Replacement PEI Sheet for Prusa i3 MK2 or MK3 - Voxel Factory -3D printer- Imprimante 3D","id":29021420093676,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-replacement-pei-sheet-for-prusa-i3-mk2-or-mk3-1_1400x_ce7c33f8-b308-4323-aff8-aa2d1dc7952e.jpg?v=1739808905"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-replacement-pei-sheet-for-prusa-i3-mk2-or-mk3-1_1400x_ce7c33f8-b308-4323-aff8-aa2d1dc7952e.jpg?v=1739808905","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eReplacement PEI sheet for the MK42 or MK52 heatbed.\u003c\/div\u003e\n\u003cdiv\u003eFor instructions on how to replace a damaged PEI sheet on your heatbed, please follow the guide found on the \u003ca href=\"http:\/\/manual.prusa3d.com\/Guide\/Replacing+the+PEI+sheet\/133\" title=\"Replacing the PEI sheet at prusa3d.com\" target=\"_blank\"\u003ePrusa Research website\u003c\/a\u003e.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eIt is ONLY compatible with Prusa i3 MK2 \/ MK2S \/ MK2.5 \/ MK2.5S \/ MK3 \/ MK3S \/ MK3S+\u003c\/div\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e260 x 242 mm\u003c\/li\u003e\n\u003cli\u003e175um thickness\u003c\/li\u003e\n\u003cli\u003e3M 200MP adhesive\u003c\/li\u003e\n\u003c\/ul\u003e"}

{"id":1811954532470,"title":"Magnetic heatbed MK52 24V (assembly)","handle":"magnetic-heatbed-mk52-24v-assembly","description":"\u003cp\u003eThis product includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMagnetic heatbed MK52 24V (1 pcs)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.voxelfactory.com\/products\/prusa-i3-mk3-heatbed-cables\" target=\"_blank\" rel=\"noopener\"\u003eHeatbed-Einsy power cable (screw-attached)\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e(1 pcs)\u003c\/li\u003e\n\u003cli\u003eHeatbed thermistor\u003cspan\u003e \u003c\/span\u003e(already mounted and fixed in place by the aluminum and kapton tapes) (1 pcs)\u003c\/li\u003e\n\u003cli\u003eTextile sleeve (Length: 300 mm, Width: 5 mm) (1 pcs)\u003c\/li\u003e\n\u003cli\u003eHeatbed cable cover\u003cspan\u003e \u003c\/span\u003e(1 pcs)\u003c\/li\u003e\n\u003cli\u003eHeatbed cable cover clip\u003cspan\u003e \u003c\/span\u003e(1 pcs)\u003c\/li\u003e\n\u003cli\u003eNuts: M3nN (3 pcs), M3n (2 pcs)\u003c\/li\u003e\n\u003cli\u003eScrews: M3x10 (5 pcs)\u003c\/li\u003e\n\u003cli\u003eWashers: M3\/3,2\/9\/0,8 (2 pcs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeight: 264.4 mm\u003c\/li\u003e\n\u003cli\u003eWidth: 254 mm\u003c\/li\u003e\n\u003cli\u003eThickness: ~3.175 mm\u003c\/li\u003e\n\u003cli\u003eMaximum working temperature: 120°C\u003c\/li\u003e\n\u003cli\u003eMaximum recommended temperature: 110°C\u003c\/li\u003e\n\u003cli\u003eVoltage: 24V\u003c\/li\u003e\n\u003cli\u003eCurrent: 6.25A\u003c\/li\u003e\n\u003cli\u003eMagnets: 45SH Neodym block magnet (28 pcs), attached by Loctite HY 4090\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTo correctly install this replacement part, visit the Prusa Research knowledge base at \u003ca href=\"https:\/\/help.prusa3d.com\/\"\u003ehelp.prusa3d.com\u003c\/a\u003e, select your specific printer model, and follow the instructions provided in the repair manual.\u003c\/p\u003e","published_at":"2019-10-09T15:48:26-04:00","created_at":"2018-07-13T15:10:57-04:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":["MK3","MK3S","MK3S-Plus"],"price":13804,"price_min":13804,"price_max":13804,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16496266903670,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-HBD-M52-000-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Magnetic heatbed MK52 24V (assembly)","public_title":null,"options":["Default Title"],"price":13804,"weight":1500,"compare_at_price":null,"inventory_quantity":5,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/Magnetic_heatbed_MK52_24V_assembly_product_picture.webp?v=1758129480","\/\/www.voxelfactory.com\/cdn\/shop\/files\/Magnetic_heatbed_MK52_24V_assembly_Cover.webp?v=1758129480"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Magnetic_heatbed_MK52_24V_assembly_product_picture.webp?v=1758129480","options":["Title"],"media":[{"alt":"Magnetic heatbed MK52 24V (assembly)","id":35955621265644,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Magnetic_heatbed_MK52_24V_assembly_product_picture.webp?v=1758129480"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Magnetic_heatbed_MK52_24V_assembly_product_picture.webp?v=1758129480","width":1400},{"alt":"Magnetic heatbed MK52 24V (assembly) Cover","id":35955621232876,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Magnetic_heatbed_MK52_24V_assembly_Cover.webp?v=1758129480"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Magnetic_heatbed_MK52_24V_assembly_Cover.webp?v=1758129480","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThis product includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMagnetic heatbed MK52 24V (1 pcs)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.voxelfactory.com\/products\/prusa-i3-mk3-heatbed-cables\" target=\"_blank\" rel=\"noopener\"\u003eHeatbed-Einsy power cable (screw-attached)\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e(1 pcs)\u003c\/li\u003e\n\u003cli\u003eHeatbed thermistor\u003cspan\u003e \u003c\/span\u003e(already mounted and fixed in place by the aluminum and kapton tapes) (1 pcs)\u003c\/li\u003e\n\u003cli\u003eTextile sleeve (Length: 300 mm, Width: 5 mm) (1 pcs)\u003c\/li\u003e\n\u003cli\u003eHeatbed cable cover\u003cspan\u003e \u003c\/span\u003e(1 pcs)\u003c\/li\u003e\n\u003cli\u003eHeatbed cable cover clip\u003cspan\u003e \u003c\/span\u003e(1 pcs)\u003c\/li\u003e\n\u003cli\u003eNuts: M3nN (3 pcs), M3n (2 pcs)\u003c\/li\u003e\n\u003cli\u003eScrews: M3x10 (5 pcs)\u003c\/li\u003e\n\u003cli\u003eWashers: M3\/3,2\/9\/0,8 (2 pcs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeight: 264.4 mm\u003c\/li\u003e\n\u003cli\u003eWidth: 254 mm\u003c\/li\u003e\n\u003cli\u003eThickness: ~3.175 mm\u003c\/li\u003e\n\u003cli\u003eMaximum working temperature: 120°C\u003c\/li\u003e\n\u003cli\u003eMaximum recommended temperature: 110°C\u003c\/li\u003e\n\u003cli\u003eVoltage: 24V\u003c\/li\u003e\n\u003cli\u003eCurrent: 6.25A\u003c\/li\u003e\n\u003cli\u003eMagnets: 45SH Neodym block magnet (28 pcs), attached by Loctite HY 4090\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTo correctly install this replacement part, visit the Prusa Research knowledge base at \u003ca href=\"https:\/\/help.prusa3d.com\/\"\u003ehelp.prusa3d.com\u003c\/a\u003e, select your specific printer model, and follow the instructions provided in the repair manual.\u003c\/p\u003e"}

{"id":4474596327542,"title":"Original E3D v6.1 24V Hotend KIT for Prusa i3 MK3","handle":"original-e3d-v6-1-24v-hotend-kit-for-prusa-i3-mk3","description":"\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eE3D hotend kit \/ assembly works with any printer that uses the E3D V6 design\u003c\/span\u003e. Comes \u003cstrong\u003eas a kit that needs to be assembled.\u003c\/strong\u003e Included are the \u003ca href=\"\/products\/replacement-thermistor-for-prusa-i3-mk2\" title=\"Replacement thermistor for Prusa i3 MK2\/S and MK3\/S 3D printers\" target=\"_blank\"\u003ethermistor\u003c\/a\u003e, \u003ca href=\"\/products\/replacement-e3d-heater-cartridge-24v-for-prusa-i3-mk3\" title=\"Replacement 24V 40W heater cartridge for Prusa i3 MK3\/S 3D printer\" target=\"_blank\"\u003eheater cartridge\u003c\/a\u003e and \u003ca href=\"\/products\/brass-nozzle-0-4mm-for-e3d-v6-hot-end\" title=\"E3D v6 0.40mm brass nozzle\" target=\"_blank\"\u003e0.40mm nozzle\u003c\/a\u003e. Instructions available from \u003ca href=\"https:\/\/e3d-online.dozuki.com\/Guide\/V6+Assembly\/6?lang=en\" title=\"E3D v6 Hotend assembly instructions\"\u003eE3D-Online\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe heater cartridge is ready to fit to a Molex 0395300002 connector (not included, see accessories); you can reuse the one already on your board if replacing an existing hotend.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIf you need the PTFE tube, select it as an accessory. PTFE tube lengths are different for the MK3 and MK3S and MK3S+ version, make sure you select the right one! Instructions to change the PTFE tube can be found at \u003ca href=\"https:\/\/manual.prusa3d.com\/Guide\/How+to+change+a+PTFE+tube+-+MK3-MK2.5\/761?lang=en\" title=\"How to change a PTFE tube Prusa i3 MK2 \/ MK3\" target=\"_blank\"\u003eprusa3d.com\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo fan included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe also carry the \u003ca href=\"https:\/\/voxelfactory.com\/collections\/original-prusa-mk3-parts\/products\/original-e3d-v6-1-hotend-for-prusa-i3-mk3\" title=\"E3D v6 assembled hotend for Prusa i3 MK3\/S\" target=\"_blank\"\u003efully assembled\u003c\/a\u003e version.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eIt is ONLY compatible with Prusa i3 MK3 \/ MK3S \/ MK3S+\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eFilament diameter : \u003cstrong\u003e1.75mm\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeater cartridge : \u003cstrong\u003e40W 24V\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2020-04-29T14:33:44-04:00","created_at":"2020-04-29T14:33:44-04:00","vendor":"E3D","type":"Prusa Research Parts","tags":["1.75mm","e3d","Hotend","MK3","prusa"],"price":9999,"price_min":9999,"price_max":9999,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31646511857782,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"E3D-HOT-PRU-MK3-KIT","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Original E3D v6.1 24V Hotend KIT for Prusa i3 MK3","public_title":null,"options":["Default Title"],"price":9999,"weight":400,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-original-e3d-v6-1-24v-hotend-kit-for-prusa-i3-mk3-1_1400x_ad92c8d5-0219-4e74-ae59-d16c6f16490c.jpg?v=1739809194"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-original-e3d-v6-1-24v-hotend-kit-for-prusa-i3-mk3-1_1400x_ad92c8d5-0219-4e74-ae59-d16c6f16490c.jpg?v=1739809194","options":["Title"],"media":[{"alt":"Original E3D v6.1 24V Hotend KIT for Prusa i3 MK3 - Voxel Factory -3D printer- Imprimante 3D","id":28991079743724,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-original-e3d-v6-1-24v-hotend-kit-for-prusa-i3-mk3-1_1400x_ad92c8d5-0219-4e74-ae59-d16c6f16490c.jpg?v=1739809194"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/prusa-research-parts-original-e3d-v6-1-24v-hotend-kit-for-prusa-i3-mk3-1_1400x_ad92c8d5-0219-4e74-ae59-d16c6f16490c.jpg?v=1739809194","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eE3D hotend kit \/ assembly works with any printer that uses the E3D V6 design\u003c\/span\u003e. Comes \u003cstrong\u003eas a kit that needs to be assembled.\u003c\/strong\u003e Included are the \u003ca href=\"\/products\/replacement-thermistor-for-prusa-i3-mk2\" title=\"Replacement thermistor for Prusa i3 MK2\/S and MK3\/S 3D printers\" target=\"_blank\"\u003ethermistor\u003c\/a\u003e, \u003ca href=\"\/products\/replacement-e3d-heater-cartridge-24v-for-prusa-i3-mk3\" title=\"Replacement 24V 40W heater cartridge for Prusa i3 MK3\/S 3D printer\" target=\"_blank\"\u003eheater cartridge\u003c\/a\u003e and \u003ca href=\"\/products\/brass-nozzle-0-4mm-for-e3d-v6-hot-end\" title=\"E3D v6 0.40mm brass nozzle\" target=\"_blank\"\u003e0.40mm nozzle\u003c\/a\u003e. Instructions available from \u003ca href=\"https:\/\/e3d-online.dozuki.com\/Guide\/V6+Assembly\/6?lang=en\" title=\"E3D v6 Hotend assembly instructions\"\u003eE3D-Online\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe heater cartridge is ready to fit to a Molex 0395300002 connector (not included, see accessories); you can reuse the one already on your board if replacing an existing hotend.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIf you need the PTFE tube, select it as an accessory. PTFE tube lengths are different for the MK3 and MK3S and MK3S+ version, make sure you select the right one! Instructions to change the PTFE tube can be found at \u003ca href=\"https:\/\/manual.prusa3d.com\/Guide\/How+to+change+a+PTFE+tube+-+MK3-MK2.5\/761?lang=en\" title=\"How to change a PTFE tube Prusa i3 MK2 \/ MK3\" target=\"_blank\"\u003eprusa3d.com\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo fan included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe also carry the \u003ca href=\"https:\/\/voxelfactory.com\/collections\/original-prusa-mk3-parts\/products\/original-e3d-v6-1-hotend-for-prusa-i3-mk3\" title=\"E3D v6 assembled hotend for Prusa i3 MK3\/S\" target=\"_blank\"\u003efully assembled\u003c\/a\u003e version.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eIt is ONLY compatible with Prusa i3 MK3 \/ MK3S \/ MK3S+\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eFilament diameter : \u003cstrong\u003e1.75mm\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeater cartridge : \u003cstrong\u003e40W 24V\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e"}

{"id":8686116897004,"title":"E3D V6 Aluminium HeaterBlock","handle":"e3d-v6-aluminium-heaterblock","description":"\u003cp\u003eE3D Part# \u003cspan\u003eV6-BLOCK-CARTRIDGE-ALU\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe V6 heater block is a core part of the E3D ecosystem as the standard heater block used in most of our HotEnds.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSupplied with an M3 grub screw to secure a cartridge-style Thermistor, PT100 or Thermocouple, and an M3 dome head screw to clamp the heater cartridge.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMaximum temperature: 300°C\u003c\/span\u003e\u003c\/p\u003e","published_at":"2024-10-10T16:09:18-04:00","created_at":"2024-10-10T16:09:18-04:00","vendor":"E3D","type":"E3D Parts","tags":["e3d","Parts","V6"],"price":1999,"price_min":1999,"price_max":1999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45813127708908,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"E3D-0V6-HTR-BLK-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"E3D V6 Aluminium HeaterBlock","public_title":null,"options":["Default Title"],"price":1999,"weight":1,"compare_at_price":null,"inventory_quantity":13,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/E3D_V6_Aluminium_HeaterBlock_Product_Picture.webp?v=1739810388"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/E3D_V6_Aluminium_HeaterBlock_Product_Picture.webp?v=1739810388","options":["Title"],"media":[{"alt":"E3D V6 Aluminium HeaterBlock - Voxel Factory -3D printer- Imprimante 3D","id":34352123969772,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/E3D_V6_Aluminium_HeaterBlock_Product_Picture.webp?v=1739810388"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/E3D_V6_Aluminium_HeaterBlock_Product_Picture.webp?v=1739810388","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eE3D Part# \u003cspan\u003eV6-BLOCK-CARTRIDGE-ALU\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe V6 heater block is a core part of the E3D ecosystem as the standard heater block used in most of our HotEnds.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSupplied with an M3 grub screw to secure a cartridge-style Thermistor, PT100 or Thermocouple, and an M3 dome head screw to clamp the heater cartridge.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMaximum temperature: 300°C\u003c\/span\u003e\u003c\/p\u003e"}

{"id":8686118207724,"title":"E3D V6 Heater Block Fixing Kit","handle":"e3d-v6-heater-block-fixing-kit","description":"\u003cp\u003eE3D Part# \u003cspan\u003eM-FIX-V6\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis spare bag of fixings for the E3D-v6 HotEnd includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4 x 3mm Screws for plastic\u003c\/li\u003e\n\u003cli\u003e1 x M3x3 Socket dome screw (Small black screw)\u003c\/li\u003e\n\u003cli\u003e1 x M3 Washer\u003c\/li\u003e\n\u003cli\u003e2 x M3x10 Socket dome screw (Long black screw)\u003c\/li\u003e\n\u003cli\u003e2 x grub screw\u003c\/li\u003e\n\u003cli\u003e1 x 2.5mm Hex wrench key\u003c\/li\u003e\n\u003cli\u003e1 x 1.5mm Hex wrench key\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2024-10-10T16:14:54-04:00","created_at":"2024-10-10T16:10:54-04:00","vendor":"E3D","type":"E3D Parts","tags":["e3d","Parts","V6"],"price":399,"price_min":399,"price_max":399,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45813137473772,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"E3D-0V6-FIX-KIT-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"E3D V6 Heater Block Fixing Kit","public_title":null,"options":["Default Title"],"price":399,"weight":1,"compare_at_price":null,"inventory_quantity":39,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/E3D_V6-Aluminimum_HeaterBlock_fixings-kit_Product_Picture.webp?v=1739810389"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/E3D_V6-Aluminimum_HeaterBlock_fixings-kit_Product_Picture.webp?v=1739810389","options":["Title"],"media":[{"alt":"E3D V6 Heater Block Fixing Kit - Voxel Factory -3D printer- Imprimante 3D","id":34352205496556,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/E3D_V6-Aluminimum_HeaterBlock_fixings-kit_Product_Picture.webp?v=1739810389"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/E3D_V6-Aluminimum_HeaterBlock_fixings-kit_Product_Picture.webp?v=1739810389","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eE3D Part# \u003cspan\u003eM-FIX-V6\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis spare bag of fixings for the E3D-v6 HotEnd includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4 x 3mm Screws for plastic\u003c\/li\u003e\n\u003cli\u003e1 x M3x3 Socket dome screw (Small black screw)\u003c\/li\u003e\n\u003cli\u003e1 x M3 Washer\u003c\/li\u003e\n\u003cli\u003e2 x M3x10 Socket dome screw (Long black screw)\u003c\/li\u003e\n\u003cli\u003e2 x grub screw\u003c\/li\u003e\n\u003cli\u003e1 x 2.5mm Hex wrench key\u003c\/li\u003e\n\u003cli\u003e1 x 1.5mm Hex wrench key\u003c\/li\u003e\n\u003c\/ul\u003e"}

{"id":9072644030700,"title":"Prusa Nozzle E3D DiamondBack","handle":"prusa-nozzle-e3d-diamondback","description":"\u003ch2\u003eWhy Choose Diamond?\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThese premium DiamondBack Prusa nozzles bring you the most extreme Nextruder Nozzle solution to date, designed and optimised in collaboration with E3D.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe rapid development of fibre, metal and ceramic filaments has increased the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eneed for abrasion-resistant nozzles.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCompared with all the nozzle options on the market, \u003cstrong\u003eDiamondBack’s diamonds deliver unmatched wear-resistance\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand versatility.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv style=\"display: flex; align-items: center; width: 100%;\"\u003e\n\u003cp\u003e\u003cimg style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/Prusa_Nozzle-4-Box-3qtr-Transparent.jpg?v=1762463428\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/Prusa_Nozzle-4-Box-Top-Transparent.jpg?v=1762525513\" alt=\"\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSmooth and Hard.\u003c\/strong\u003e Unlock extreme wear resistance thanks to DiamondBack’s Polycrystalline Diamond (PCD) tips. These diamonds are composed of thousands of tiny diamond crystals with a proprietary binder that forms a matrix of crystals joined with diamond-to-diamond bonds. They retain the hardness properties of diamond whilst reducing the inherent brittleness of a single-crystal diamond, making them a fantastic choice for printing with engineering grade metal and ceramic-filled filaments.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrecision Printing.\u003c\/strong\u003e DiamondBack nozzles rely on a solid diamond tip to improve precision 3D printing. The tip is not a diamond coating, but rather a solid diamond insert made from the hardest material in the world.  \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLongevity.\u003c\/strong\u003e The PCD used in these Prusa Nextruder Nozzles significantly extends nozzle life. It provides best-in-class thermal conductivity which improves interlayer adhesion for stronger prints, and the low coefficient of friction combined with a polished tip creates super smooth top layers with an ironing-like effect. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEffortless Upgrade. \u003c\/strong\u003eThese HotEnds are a drop-in replacement for your stock Prusa Nextruder Nozzle, no adjustment to the mount or part cooling is required.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv style=\"display: flex; gap: 2.5em; flex-wrap: wrap; width: 100%;\"\u003e\n\u003cdiv style=\"display: flex; gap: 1em;\"\u003e\n\u003csvg aria-hidden=\"true\" viewbox=\"0 0 448 512\" role=\"img\" data-icon=\"plus\" data-prefix=\"fal\" color=\"#5DAF0B\" style=\"width: 2em; height: auto;\"\u003e\u003cpath d=\"M240 48c0-8.8-7.2-16-16-16s-16 7.2-16 16l0 192-192 0c-8.8 0-16 7.2-16 16s7.2 16 16 16l192 0 0 192c0 8.8 7.2 16 16 16s16-7.2 16-16l0-192 192 0c8.8 0 16-7.2 16-16s-7.2-16-16-16l-192 0 0-192z\" fill=\"currentColor\" style=\"color:#5DAF0B;\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cp style=\"min-width: max-content; display: flex; align-items: center; justify-content: center;\"\u003eUltimate abrasion resistance\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; gap: 1em; align-items: center; justify-content: center;\"\u003e\n\u003csvg aria-hidden=\"true\" viewbox=\"0 0 448 512\" role=\"img\" data-icon=\"plus\" data-prefix=\"fal\" color=\"#5DAF0B\" style=\"width: 2em; height: auto;\"\u003e\u003cpath d=\"M240 48c0-8.8-7.2-16-16-16s-16 7.2-16 16l0 192-192 0c-8.8 0-16 7.2-16 16s7.2 16 16 16l192 0 0 192c0 8.8 7.2 16 16 16s16-7.2 16-16l0-192 192 0c8.8 0 16-7.2 16-16s-7.2-16-16-16l-192 0 0-192z\" fill=\"currentColor\" style=\"color:#5DAF0B;\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cp style=\"min-width: max-content; display: flex; align-items: center; justify-content: center;\"\u003eCompatible with Nextruder\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; gap: 1em; align-items: center; justify-content: center;\"\u003e\n\u003csvg aria-hidden=\"true\" viewbox=\"0 0 448 512\" role=\"img\" data-icon=\"minus\" data-prefix=\"fal\" color=\"#CB2C2C\" style=\"width: 2em; height: auto;\"\u003e\u003cpath d=\"M0 256c0-8.8 7.2-16 16-16l416 0c8.8 0 16 7.2 16 16s-7.2 16-16 16L16 272c-8.8 0-16-7.2-16-16z\" fill=\"currentColor\" style=\"color:#CB2C2C;\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cp style=\"min-width: max-content; display: flex; align-items: center; justify-content: center;\"\u003eNOT high flow\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"display: flex; gap: 1em; padding: 1em 1em 1em 1.5em; background-color: rgba(13, 182, 250, 0.25); border-radius: 2px; border-style: solid; border-width: 0 0 0 5px; border-color: rgba(5, 176, 245, 0.25);\"\u003e\n\u003csvg aria-hidden=\"true\" viewbox=\"0 0 512 512\" role=\"img\" class=\"svg-inline--fa fa-circle-info fa-lg\" data-icon=\"circle-info\" data-prefix=\"fas\" style=\"width: 1em; height: auto;\"\u003e\u003cpath d=\"M256 512a256 256 0 1 0 0-512 256 256 0 1 0 0 512zM224 160a32 32 0 1 1 64 0 32 32 0 1 1 -64 0zm-8 64l48 0c13.3 0 24 10.7 24 24l0 88 8 0c13.3 0 24 10.7 24 24s-10.7 24-24 24l-80 0c-13.3 0-24-10.7-24-24s10.7-24 24-24l24 0 0-64-24 0c-13.3 0-24-10.7-24-24s10.7-24 24-24z\" fill=\"currentColor\" style=\"color: rgb(13, 182, 250);\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cp style=\"min-width: max-content; display: flex; align-items: center; justify-content: center;\"\u003eFor optimal results use standard flow profiles in your Prusa Slicer.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eNotes:\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eInput diameter: 1.75mm\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eMax temperature: 300°C\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eAvailable in 0.4, 0.6 and 0.8 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThis product includes:\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e1x Prusa Nozzle E3D DiamondBack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTo correctly install this replacement part, visit the Prusa Research knowledge base at \u003ca href=\"https:\/\/help.prusa3d.com\/\" class=\"voxel-product-description-link\"\u003ehelp.prusa3d.com\u003c\/a\u003e, select your specific printer model, and follow the instructions provided in the repair manual.\u003c\/p\u003e","published_at":"2025-11-07T09:32:19-05:00","created_at":"2025-11-06T16:13:28-05:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":["CORE One","MK3.9","MK3.9S","MK4","MK4S","XL"],"price":21499,"price_min":21499,"price_max":21499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":46959072641260,"title":"0.4mm","option1":"0.4mm","option2":null,"option3":null,"sku":"PRU-NOZ-E3D-DMN-040","requires_shipping":true,"taxable":true,"featured_image":{"id":45139863437548,"product_id":9072644030700,"position":1,"created_at":"2025-11-07T08:32:03-05:00","updated_at":"2025-11-07T08:36:02-05:00","alt":"Prusa Nozzle E3D DiamondBack 0.40 mm","width":1400,"height":1050,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_Nozzle_E3D_DiamondBack_0_40_mm_product_picture.webp?v=1762522562","variant_ids":[46959072641260]},"available":true,"name":"Prusa Nozzle E3D DiamondBack - 0.4mm","public_title":"0.4mm","options":["0.4mm"],"price":21499,"weight":100,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","featured_media":{"alt":"Prusa Nozzle E3D DiamondBack 0.40 mm","id":36230359122156,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_Nozzle_E3D_DiamondBack_0_40_mm_product_picture.webp?v=1762522562"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":46959072674028,"title":"0.6mm","option1":"0.6mm","option2":null,"option3":null,"sku":"PRU-NOZ-E3D-DMN-060","requires_shipping":true,"taxable":true,"featured_image":{"id":45139863470316,"product_id":9072644030700,"position":2,"created_at":"2025-11-07T08:32:03-05:00","updated_at":"2025-11-07T08:36:02-05:00","alt":"Prusa Nozzle E3D DiamondBack 0.60 mm","width":1400,"height":1050,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_Nozzle_E3D_DiamondBack_0_60_mm_product_picture.webp?v=1762522562","variant_ids":[46959072674028]},"available":false,"name":"Prusa Nozzle E3D DiamondBack - 0.6mm","public_title":"0.6mm","options":["0.6mm"],"price":21499,"weight":100,"compare_at_price":null,"inventory_quantity":-3,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","featured_media":{"alt":"Prusa Nozzle E3D DiamondBack 0.60 mm","id":36230359154924,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_Nozzle_E3D_DiamondBack_0_60_mm_product_picture.webp?v=1762522562"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_Nozzle_E3D_DiamondBack_0_40_mm_product_picture.webp?v=1762522562","\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_Nozzle_E3D_DiamondBack_0_60_mm_product_picture.webp?v=1762522562","\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_Nozzle_E3D_DiamondBack_package.webp?v=1762522429","\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_Nozzle_E3D_DiamondBack_package_from_top.webp?v=1762522429"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_Nozzle_E3D_DiamondBack_0_40_mm_product_picture.webp?v=1762522562","options":["Nozzle diameter"],"media":[{"alt":"Prusa Nozzle E3D DiamondBack 0.40 mm","id":36230359122156,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_Nozzle_E3D_DiamondBack_0_40_mm_product_picture.webp?v=1762522562"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_Nozzle_E3D_DiamondBack_0_40_mm_product_picture.webp?v=1762522562","width":1400},{"alt":"Prusa Nozzle E3D DiamondBack 0.60 mm","id":36230359154924,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_Nozzle_E3D_DiamondBack_0_60_mm_product_picture.webp?v=1762522562"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_Nozzle_E3D_DiamondBack_0_60_mm_product_picture.webp?v=1762522562","width":1400},{"alt":"Prusa Nozzle E3D DiamondBack package","id":36230359220460,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_Nozzle_E3D_DiamondBack_package.webp?v=1762522429"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_Nozzle_E3D_DiamondBack_package.webp?v=1762522429","width":1400},{"alt":"Prusa Nozzle E3D DiamondBack package from top","id":36230359187692,"position":4,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_Nozzle_E3D_DiamondBack_package_from_top.webp?v=1762522429"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_Nozzle_E3D_DiamondBack_package_from_top.webp?v=1762522429","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003eWhy Choose Diamond?\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThese premium DiamondBack Prusa nozzles bring you the most extreme Nextruder Nozzle solution to date, designed and optimised in collaboration with E3D.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe rapid development of fibre, metal and ceramic filaments has increased the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eneed for abrasion-resistant nozzles.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCompared with all the nozzle options on the market, \u003cstrong\u003eDiamondBack’s diamonds deliver unmatched wear-resistance\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand versatility.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv style=\"display: flex; align-items: center; width: 100%;\"\u003e\n\u003cp\u003e\u003cimg style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/Prusa_Nozzle-4-Box-3qtr-Transparent.jpg?v=1762463428\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 100%;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/files\/Prusa_Nozzle-4-Box-Top-Transparent.jpg?v=1762525513\" alt=\"\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSmooth and Hard.\u003c\/strong\u003e Unlock extreme wear resistance thanks to DiamondBack’s Polycrystalline Diamond (PCD) tips. These diamonds are composed of thousands of tiny diamond crystals with a proprietary binder that forms a matrix of crystals joined with diamond-to-diamond bonds. They retain the hardness properties of diamond whilst reducing the inherent brittleness of a single-crystal diamond, making them a fantastic choice for printing with engineering grade metal and ceramic-filled filaments.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrecision Printing.\u003c\/strong\u003e DiamondBack nozzles rely on a solid diamond tip to improve precision 3D printing. The tip is not a diamond coating, but rather a solid diamond insert made from the hardest material in the world.  \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLongevity.\u003c\/strong\u003e The PCD used in these Prusa Nextruder Nozzles significantly extends nozzle life. It provides best-in-class thermal conductivity which improves interlayer adhesion for stronger prints, and the low coefficient of friction combined with a polished tip creates super smooth top layers with an ironing-like effect. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEffortless Upgrade. \u003c\/strong\u003eThese HotEnds are a drop-in replacement for your stock Prusa Nextruder Nozzle, no adjustment to the mount or part cooling is required.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv style=\"display: flex; gap: 2.5em; flex-wrap: wrap; width: 100%;\"\u003e\n\u003cdiv style=\"display: flex; gap: 1em;\"\u003e\n\u003csvg aria-hidden=\"true\" viewbox=\"0 0 448 512\" role=\"img\" data-icon=\"plus\" data-prefix=\"fal\" color=\"#5DAF0B\" style=\"width: 2em; height: auto;\"\u003e\u003cpath d=\"M240 48c0-8.8-7.2-16-16-16s-16 7.2-16 16l0 192-192 0c-8.8 0-16 7.2-16 16s7.2 16 16 16l192 0 0 192c0 8.8 7.2 16 16 16s16-7.2 16-16l0-192 192 0c8.8 0 16-7.2 16-16s-7.2-16-16-16l-192 0 0-192z\" fill=\"currentColor\" style=\"color:#5DAF0B;\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cp style=\"min-width: max-content; display: flex; align-items: center; justify-content: center;\"\u003eUltimate abrasion resistance\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; gap: 1em; align-items: center; justify-content: center;\"\u003e\n\u003csvg aria-hidden=\"true\" viewbox=\"0 0 448 512\" role=\"img\" data-icon=\"plus\" data-prefix=\"fal\" color=\"#5DAF0B\" style=\"width: 2em; height: auto;\"\u003e\u003cpath d=\"M240 48c0-8.8-7.2-16-16-16s-16 7.2-16 16l0 192-192 0c-8.8 0-16 7.2-16 16s7.2 16 16 16l192 0 0 192c0 8.8 7.2 16 16 16s16-7.2 16-16l0-192 192 0c8.8 0 16-7.2 16-16s-7.2-16-16-16l-192 0 0-192z\" fill=\"currentColor\" style=\"color:#5DAF0B;\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cp style=\"min-width: max-content; display: flex; align-items: center; justify-content: center;\"\u003eCompatible with Nextruder\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; gap: 1em; align-items: center; justify-content: center;\"\u003e\n\u003csvg aria-hidden=\"true\" viewbox=\"0 0 448 512\" role=\"img\" data-icon=\"minus\" data-prefix=\"fal\" color=\"#CB2C2C\" style=\"width: 2em; height: auto;\"\u003e\u003cpath d=\"M0 256c0-8.8 7.2-16 16-16l416 0c8.8 0 16 7.2 16 16s-7.2 16-16 16L16 272c-8.8 0-16-7.2-16-16z\" fill=\"currentColor\" style=\"color:#CB2C2C;\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cp style=\"min-width: max-content; display: flex; align-items: center; justify-content: center;\"\u003eNOT high flow\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"display: flex; gap: 1em; padding: 1em 1em 1em 1.5em; background-color: rgba(13, 182, 250, 0.25); border-radius: 2px; border-style: solid; border-width: 0 0 0 5px; border-color: rgba(5, 176, 245, 0.25);\"\u003e\n\u003csvg aria-hidden=\"true\" viewbox=\"0 0 512 512\" role=\"img\" class=\"svg-inline--fa fa-circle-info fa-lg\" data-icon=\"circle-info\" data-prefix=\"fas\" style=\"width: 1em; height: auto;\"\u003e\u003cpath d=\"M256 512a256 256 0 1 0 0-512 256 256 0 1 0 0 512zM224 160a32 32 0 1 1 64 0 32 32 0 1 1 -64 0zm-8 64l48 0c13.3 0 24 10.7 24 24l0 88 8 0c13.3 0 24 10.7 24 24s-10.7 24-24 24l-80 0c-13.3 0-24-10.7-24-24s10.7-24 24-24l24 0 0-64-24 0c-13.3 0-24-10.7-24-24s10.7-24 24-24z\" fill=\"currentColor\" style=\"color: rgb(13, 182, 250);\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\n\u003cp style=\"min-width: max-content; display: flex; align-items: center; justify-content: center;\"\u003eFor optimal results use standard flow profiles in your Prusa Slicer.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eNotes:\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eInput diameter: 1.75mm\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eMax temperature: 300°C\u003c\/li\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003eAvailable in 0.4, 0.6 and 0.8 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThis product includes:\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003e1x Prusa Nozzle E3D DiamondBack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTo correctly install this replacement part, visit the Prusa Research knowledge base at \u003ca href=\"https:\/\/help.prusa3d.com\/\" class=\"voxel-product-description-link\"\u003ehelp.prusa3d.com\u003c\/a\u003e, select your specific printer model, and follow the instructions provided in the repair manual.\u003c\/p\u003e"}

{"id":9091634561260,"title":"Prusa Nozzle ObXidian","handle":"prusa-nozzle-obxidian","description":"\u003cp\u003eThe Prusa Nozzle ObXidian is a\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ehigh-quality nozzle designed specifically for Nextruder\u003c\/strong\u003e. It is made from\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ehardened steel\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ewith a\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ecorrosion-resistant coating\u003c\/strong\u003e, ensuring exceptional durability and longevity. These nozzles are particularly suitable\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003efor printing with abrasive materials\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003elike carbon fiber, as they maintain their hardness even at higher temperatures, delivering excellent performance and\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eextending the lifespan of your nozzle\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThis product includes:\u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003ePrusa Nozzle ObXidian (1x)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTo correctly install this replacement part, visit the Prusa Research knowledge base at \u003ca href=\"https:\/\/help.prusa3d.com\/\" class=\"voxel-product-description-link\"\u003ehelp.prusa3d.com\u003c\/a\u003e, select your specific printer model, and follow the instructions provided in the repair manual.\u003c\/p\u003e","published_at":"2025-11-28T12:12:01-05:00","created_at":"2025-11-28T12:11:59-05:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":["CORE One\/+","MK3.9","MK3.9S","MK4","MK4S","XL"],"price":6599,"price_min":6599,"price_max":8299,"available":false,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47036948152556,"title":"0.4mm","option1":"0.4mm","option2":null,"option3":null,"sku":"PRU-NOZ-OXN-040-000","requires_shipping":true,"taxable":true,"featured_image":{"id":45267315491052,"product_id":9091634561260,"position":2,"created_at":"2025-11-28T12:11:34-05:00","updated_at":"2025-11-28T12:14:33-05:00","alt":"Prusa Nozzle ObXidian 0.4mm","width":1400,"height":1050,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_Nozzle_ObXidian_0_4mm_Product_Picture.webp?v=1764350073","variant_ids":[47036948152556]},"available":false,"name":"Prusa Nozzle ObXidian - 0.4mm","public_title":"0.4mm","options":["0.4mm"],"price":8299,"weight":100,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","featured_media":{"alt":"Prusa Nozzle ObXidian 0.4mm","id":36317098082540,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_Nozzle_ObXidian_0_4mm_Product_Picture.webp?v=1764350073"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":47036948185324,"title":"0.6mm","option1":"0.6mm","option2":null,"option3":null,"sku":"PRU-NOZ-OXN-060-000","requires_shipping":true,"taxable":true,"featured_image":{"id":45267316015340,"product_id":9091634561260,"position":3,"created_at":"2025-11-28T12:11:44-05:00","updated_at":"2025-11-28T12:14:33-05:00","alt":"Prusa Nozzle ObXidian 0.6mm","width":1400,"height":1050,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_Nozzle_ObXidian_0_6mm_Product_Picture.webp?v=1764350073","variant_ids":[47036948185324]},"available":false,"name":"Prusa Nozzle ObXidian - 0.6mm","public_title":"0.6mm","options":["0.6mm"],"price":6599,"weight":100,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","featured_media":{"alt":"Prusa Nozzle ObXidian 0.6mm","id":36317098377452,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_Nozzle_ObXidian_0_6mm_Product_Picture.webp?v=1764350073"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_Nozzle_ObXidian_Thumbnail.webp?v=1764350073","\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_Nozzle_ObXidian_0_4mm_Product_Picture.webp?v=1764350073","\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_Nozzle_ObXidian_0_6mm_Product_Picture.webp?v=1764350073"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_Nozzle_ObXidian_Thumbnail.webp?v=1764350073","options":["Nozzle diameter"],"media":[{"alt":"Prusa Nozzle ObXidian Thumbnail","id":36317099589868,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_Nozzle_ObXidian_Thumbnail.webp?v=1764350073"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_Nozzle_ObXidian_Thumbnail.webp?v=1764350073","width":1400},{"alt":"Prusa Nozzle ObXidian 0.4mm","id":36317098082540,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_Nozzle_ObXidian_0_4mm_Product_Picture.webp?v=1764350073"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_Nozzle_ObXidian_0_4mm_Product_Picture.webp?v=1764350073","width":1400},{"alt":"Prusa Nozzle ObXidian 0.6mm","id":36317098377452,"position":3,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_Nozzle_ObXidian_0_6mm_Product_Picture.webp?v=1764350073"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/files\/Prusa_Nozzle_ObXidian_0_6mm_Product_Picture.webp?v=1764350073","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThe Prusa Nozzle ObXidian is a\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ehigh-quality nozzle designed specifically for Nextruder\u003c\/strong\u003e. It is made from\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ehardened steel\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ewith a\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ecorrosion-resistant coating\u003c\/strong\u003e, ensuring exceptional durability and longevity. These nozzles are particularly suitable\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003efor printing with abrasive materials\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003elike carbon fiber, as they maintain their hardness even at higher temperatures, delivering excellent performance and\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eextending the lifespan of your nozzle\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThis product includes:\u003c\/p\u003e\n\u003cul class=\"voxel-product-description-list\"\u003e\n\u003cli class=\"voxel-product-description-list-element\"\u003ePrusa Nozzle ObXidian (1x)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTo correctly install this replacement part, visit the Prusa Research knowledge base at \u003ca href=\"https:\/\/help.prusa3d.com\/\" class=\"voxel-product-description-link\"\u003ehelp.prusa3d.com\u003c\/a\u003e, select your specific printer model, and follow the instructions provided in the repair manual.\u003c\/p\u003e"}

{"id":4168460828790,"title":"E3D v6 Nozzle Fun Pack","handle":"e3d-v6-nozzle-fun-pack","description":"\u003cp\u003eAn assortment of six brass nozzles in different sizes, all compatible with E3D v6 hotends. Includes a small spanner to make nozzle swap easier!\u003c\/p\u003e\n\u003cp\u003eFilament size : \u003cstrong\u003e1.75mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNozzle sizes :\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e0.25mm\u003c\/li\u003e\n\u003cli\u003e0.30mm\u003c\/li\u003e\n\u003cli\u003e0.35mm\u003c\/li\u003e\n\u003cli\u003e0.50mm\u003c\/li\u003e\n\u003cli\u003e0.60mm\u003c\/li\u003e\n\u003cli\u003e0.80mm\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2019-09-30T14:57:45-04:00","created_at":"2019-09-30T16:12:38-04:00","vendor":"E3D","type":"Open Parts","tags":["kit","MK2","MK2S","MK3","MK3S","nozzle"],"price":4999,"price_min":4999,"price_max":4999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30307601121398,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"E3D-NPK-FUN-175-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"E3D v6 Nozzle Fun Pack","public_title":null,"options":["Default Title"],"price":4999,"weight":200,"compare_at_price":null,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.voxelfactory.com\/cdn\/shop\/products\/open-parts-e3d-v6-nozzle-fun-pack-1_1400x_659143b1-577f-4715-851e-492fe4b0d887.jpg?v=1739809151"],"featured_image":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/open-parts-e3d-v6-nozzle-fun-pack-1_1400x_659143b1-577f-4715-851e-492fe4b0d887.jpg?v=1739809151","options":["Title"],"media":[{"alt":"E3D v6 Nozzle Fun Pack - Voxel Factory -3D printer- Imprimante 3D","id":28984455889132,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/open-parts-e3d-v6-nozzle-fun-pack-1_1400x_659143b1-577f-4715-851e-492fe4b0d887.jpg?v=1739809151"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"\/\/www.voxelfactory.com\/cdn\/shop\/products\/open-parts-e3d-v6-nozzle-fun-pack-1_1400x_659143b1-577f-4715-851e-492fe4b0d887.jpg?v=1739809151","width":1400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eAn assortment of six brass nozzles in different sizes, all compatible with E3D v6 hotends. Includes a small spanner to make nozzle swap easier!\u003c\/p\u003e\n\u003cp\u003eFilament size : \u003cstrong\u003e1.75mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNozzle sizes :\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e0.25mm\u003c\/li\u003e\n\u003cli\u003e0.30mm\u003c\/li\u003e\n\u003cli\u003e0.35mm\u003c\/li\u003e\n\u003cli\u003e0.50mm\u003c\/li\u003e\n\u003cli\u003e0.60mm\u003c\/li\u003e\n\u003cli\u003e0.80mm\u003c\/li\u003e\n\u003c\/ul\u003e"}