New Ultimaker 2+ Connect Single nozzle 3D printer and Air Manager accessory

RSS
New Ultimaker 2+ Connect Single nozzle 3D printer and Air Manager accessory

Start 3D printing the

Ultimaker way

With networking capabilities and a new touchscreen, the Ultimaker 2+ Connect is your reliable first step into our world of easy, remote 3D printing. Simply unbox and connect three components, and get started. This speedy setup even makes installing multiple 3D printers effortless.

 

Ultimaker 2+ Connect - Features and Specs

 


Build volume: (XYZ) 223 x 220 x 205 mm (8.7 x 8.6 x 8 in)
Build plate: Heated glass build plate (20 - 110 °C)

Manual bed leveling

Print head: Single extrusion with swappable nozzles

Layer resolution:

0.25 mm nozzle: 150 - 60 micron
0.4 mm nozzle: 200 - 20 micron
0.6 mm nozzle: 400 - 20 micron
0.8 mm nozzle: 600 - 20 micron

Assembled dimensions: 342 x 460 x 580 mm (13.5 x 18.1 x 22.8 in

Net weight: 10.3 kg (22.7 lbs)

 High uptime. Low maintenance

Thousands of designers and educators love Ultimaker technology because it just keeps working – day and night, year after year. Since 2015, over 6 million prints have been prepared for its predecessor. And the Ultimaker 2+ Connect improves on that workhorse legacy.

 

 

 
A reliable first step into a world of easy, remote 3D printing

Network connectivity : Via Wi-Fi or Ethernet, print remotely over the cloud with added security

Easy setup : Install the printer in minutes, and benefit from improved ergonomics and assisted bed leveling
Next-gen components : A stiffer build platform and rigorously tested material profiles ensure reliable printing
Touchscreen : For every action, the 2.4” color touchscreen gives you intuitive control and assistance
Easy maintenance : A clean and updated design keeps maintenance needs to around 20 minutes per month
Wide material choice : With our open filament system, you can always find the right material
Enhanced safety : The Ultimaker 2+ Connect Air Manager removes up to 95% of ultrafine particles and shields users from hot components (sold separately)


Ultimaker 2+ Connect Air Manager
and Front Door

The optional Ultimaker 2+ Connect Air Manager gives you more confidence and setup flexibility. Designed to simply and effectively increase user safety, it removes up to 95% of ultrafine particles (UFPs) and shields users from hot and moving components.

Features :
• Filter technology : EPA E10 filter
• Fan technology : low-noise brushless fan
• Air refresh rate : 1 - 50 m³/h (35 m³/h nominal rate for most materials at 23°C)
• Filter replacement recommended every 1500 print hours (approx. 1 year)
• Operating sound : less than 51 dBA (including Ultimaker 2+ Connect)
• Controlled extraction of air
• Enhanced safety : physical barrier against dust and wandering hands
• Detects material being used and adjusts airflow accordingly
• Easy to install, detected by the printer when connected
• Smart monitoring : tracks usage and prompts filter replacement
• Optimized for Ultimaker materials, 3rd party materials also supported

Previous Post

  • Michelle Dallas