ColorFabb NEW _XT formula and WoodFill FINE now available at Voxel Factory!

RSS
You need stronger material than PLA but you don't like to work with ABS? ColorFabb _XT new formula is for you. Better bridging than before, almost no odour and less warping than ABS! Easier to extrude at 260c but also print at 240c with J-Head at slower speed ( Approx 30mm/s is a good start). Woodfill FINE also available in 1.75mm and 3mm on 750gr. spool :-)


Previous Post Next Post

  • François Lahey