DyzEND-X + DyzeXtruder GT Full Kit for 1.75mm

Product Description

***You will have to make modification to the firmware for the 500°C thermistor. If you want we also sell the 300°C thermistor here. For more information about the modification go here.***

The Dyze Design DyzEND-X is a Canadian made, high performance all metal hotend that is able to print materials at up to 500°C (24V, enclosed print area).

The 410 stainless steel nozzle can handle the most abrasive materials like Carbon Fiber filled filaments in addition to being easy and affordable to replace when needed.

The Dyze Design GT Xtruder is a Canadian made, high quality and all metal extruder that is able to print any kind of materials. So far, we've personally tried using the very flexible NinjaFlex and it works like a charm.

The DyzeXtruder is 100% metal, groove mount, liquid cooling and bowden tube ready.

  • 1x 0.4 mm 410 stainless steel nozzle
  • Hard Titanium thermal break
  • Compatible with every 1.75mm filaments
  • Up to 500°C (24V, enclosed print area)
  • Fully assembled and tested all metal extruder
  • Compatible with every 1.75mm filaments
  • Dual Pinch drive
  • Metal Reduction Gears for High pushing force of 9kg (20lbs)
  • Easy filament insertion and removal
  • Simple hotend swapping 
  • Liquid Cooling Ready
  • Adjustable width to connect the most known RepRap hotends
  • All metal DyzEND-X Hotend
  • 1x 0.4 mm 410 stainless steel nozzle.
  • 40W Ceramic Heater Cartridge
  • Assembly of high-temperature thermistors (500°C)
  • All metal DyzeXtruder GT
  • Custom-made spring specifically designed for optimal strength
  • NEMA 17x40 stepper motor - 0.9 deg - 1.68 A
  • 1 meter cable
  • Every needed bolts/nuts/etc.
  • 2 Allen Keys (2 mm, 2.5 mm).
  • 3x Conical Washers
  • 2x M4 Screws

Known compatible materials

  • ColorFabb CarbonFiber XT CF20
  • Other Carbon Fiber filled materials
  • PEEK
  • PLA
  • ABS
  • PC
  • PC-ABS
  • ColorFabb BrassFill
  • ColorFabb BronzeFill
  • ColorFabb CopperFill
  • ColorFabb WoodFill *** .5mm Nozzle ***
  • ColorFabb BambooFill *** .5mm+ Nozzle ***
  • ColorFabb XT, HT, nGen (Eastman Amphora)
  • All taulman Nylons and other Nylons
  • TPE
  • FennerDrives NinjaFlex and SemiFlex
  • ...