Isopropyl Alcohol (IPA) 99% 4L

{"id":355423505,"title":"3DLAC for strong ABS (and more) adhesion to glass","handle":"3dlac-tapes-replacement-to-make-abs-pla-and-_xt-stick-properly-to-heated-glass","description":"\u003cp\u003eThe polyvalent adhesion solution for your 3D printing needs. Use with\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/voxelfactory.myshopify.com\/products\/3m-2090-scotch-blue-painters-tape-48mm-x-54-8m\" title=\"Blue Painter's Tape at Voxel Factory\" target=\"_blank\"\u003eblue painter's tape\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eon a cold print bed, or directly on glass or PEI-covered heatbeds to maximize part adhesion, prevent warping and reduce print failures. Useful for printing PLA, ABS, polycarbonate, PETG, copolyester, and more!\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #cc0000;\"\u003e*** PLEASE NOTE THAT 3DLAC CAN ONLY BE SHIPPED INSIDE CANADA BY FEDEX GROUND OR CANADA POST (ALL SERVICES). Any order containing this product with any FEDEX EXPRESS or PRIORITY, or shipping outside Canada will be cancelled ***\u003c\/span\u003e For priority (air) shipping you should order \u003ca href=\"\/products\/3dlac-plus-adhesive-solution\" title=\"3DLAC Plus adhesive solution at Voxel Factory\" target=\"_blank\"\u003e3DLAC Plus\u003c\/a\u003e, as its contents are not pressurized.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDoes not work with Nylon, use PVA glue stick (like Elmer's) instead.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eVolume :\u003cb\u003e\u003cspan\u003e 4\u003c\/span\u003e00mL\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eContents : Isopropyl alcohol - Methylal - Isobutane - Propane - VP\/VA copolymer - Alcohol denat - Parfum (Benzyl alcohol, Benzyl salicilate, Coumarin, Geraniol, Butylphenyl Methylpropional, Linalool, Benzyl benzoate, Citronellol, Alphaisomethylionone, Hydroxycitronellal, Amyl cinnamal)\u003c\/span\u003e\u003c\/p\u003e","published_at":"2014-08-11T15:21:00-04:00","created_at":"2014-08-11T15:21:35-04:00","vendor":"LABORATORIOS 3D PRINT, S.L.","type":"Tools","tags":["3DLac","adhesive","tools"],"price":999,"price_min":999,"price_max":999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29203593756790,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LEO-3DL-AC1-CAN-400","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"3DLAC for strong ABS (and more) adhesion to glass","public_title":null,"options":["Default Title"],"price":999,"weight":500,"compare_at_price":null,"inventory_quantity":532,"inventory_management":"shopify","inventory_policy":"deny","barcode":"8411322235803","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/tools-3dlac-for-strong-abs-and-more-adhesion-to-glass-1.jpg?v=1579895875"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/tools-3dlac-for-strong-abs-and-more-adhesion-to-glass-1.jpg?v=1579895875","options":["Title"],"media":[{"alt":null,"id":6013033054326,"position":1,"preview_image":{"aspect_ratio":1.333,"height":768,"width":1024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/tools-3dlac-for-strong-abs-and-more-adhesion-to-glass-1.jpg?v=1579895875"},"aspect_ratio":1.333,"height":768,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/tools-3dlac-for-strong-abs-and-more-adhesion-to-glass-1.jpg?v=1579895875","width":1024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThe polyvalent adhesion solution for your 3D printing needs. Use with\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/voxelfactory.myshopify.com\/products\/3m-2090-scotch-blue-painters-tape-48mm-x-54-8m\" title=\"Blue Painter's Tape at Voxel Factory\" target=\"_blank\"\u003eblue painter's tape\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eon a cold print bed, or directly on glass or PEI-covered heatbeds to maximize part adhesion, prevent warping and reduce print failures. Useful for printing PLA, ABS, polycarbonate, PETG, copolyester, and more!\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #cc0000;\"\u003e*** PLEASE NOTE THAT 3DLAC CAN ONLY BE SHIPPED INSIDE CANADA BY FEDEX GROUND OR CANADA POST (ALL SERVICES). Any order containing this product with any FEDEX EXPRESS or PRIORITY, or shipping outside Canada will be cancelled ***\u003c\/span\u003e For priority (air) shipping you should order \u003ca href=\"\/products\/3dlac-plus-adhesive-solution\" title=\"3DLAC Plus adhesive solution at Voxel Factory\" target=\"_blank\"\u003e3DLAC Plus\u003c\/a\u003e, as its contents are not pressurized.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDoes not work with Nylon, use PVA glue stick (like Elmer's) instead.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eVolume :\u003cb\u003e\u003cspan\u003e 4\u003c\/span\u003e00mL\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eContents : Isopropyl alcohol - Methylal - Isobutane - Propane - VP\/VA copolymer - Alcohol denat - Parfum (Benzyl alcohol, Benzyl salicilate, Coumarin, Geraniol, Butylphenyl Methylpropional, Linalool, Benzyl benzoate, Citronellol, Alphaisomethylionone, Hydroxycitronellal, Amyl cinnamal)\u003c\/span\u003e\u003c\/p\u003e"}

{"id":6094472937652,"title":"Original Prusa i3 MK3S+ DIY Kit","handle":"original-prusa-i3-mk3s-plus-diy-kit","description":"\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan style=\"color: #ff2a00;\" data-mce-fragment=\"1\" data-mce-style=\"color: #ff2a00;\" mce-data-marked=\"1\"\u003eETA St-Hubert : December 13 to december 17\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan style=\"color: #ff2a00;\" data-mce-fragment=\"1\" data-mce-style=\"color: #ff2a00;\" mce-data-marked=\"1\"\u003eETA Burnaby : UNKNOWN (Presales will ship from St-Hubert IF POSSIBLE)\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan style=\"color: #ff2a00;\" data-mce-fragment=\"1\" data-mce-style=\"color: #ff2a00;\" mce-data-marked=\"1\"\u003eSIGNATURE REQUIRED ON DELIVERY - YOU MIGHT HAVE TO GO PICK IT UP AT YOUR LOCAL POST OFFICE IF YOU ARE ABSENT ON DELIVERY DAY\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\" mce-data-marked=\"1\"\u003eOriginal Prusa i3 MK3S+ \u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\" mce-data-marked=\"1\"\u003eIntroducing the SuperPINDA and a number of small changes. X and Y axes have slightly improved, plastic parts and u-bolts were changed to metal clips which are easier to mount. A number of minor changes were done to the extruder plastic parts to improve overall reliability.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #00aaff;\"\u003e\u003ca style=\"color: #00aaff;\" href=\"https:\/\/blog.prusaprinters.org\/november2020_update_original_prusa_i3_mk3splus_miniplus_mini_kit_satin_steel_sheet_40870\/#extruder\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eBlog post highlighting the new changes\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePrusa Silver PLA filament included!\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003c\/b\u003e\u003cspan style=\"color: #ff0000;\" data-mce-style=\"color: #ff0000;\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003eDIY kit – Assembly required, tools included, no soldering needed.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAll printer kits now ship with the Smooth PEI spring steel sheet, if you want the textured powder-coated PEI spring steel sheet it is \u003ca href=\"https:\/\/www.voxelfactory.com\/products\/textured-powder-coated-spring-steel-sheet-for-prusa-i3-mk3?_pos=1\u0026amp;_sid=a0d1f1eb2\u0026amp;_ss=r\" title=\"Textured sheet for Prusa i3 MK3S+\"\u003eavailable separately\u003c\/a\u003e upon request (email us!).\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOriginal Prusa design i3 MK3S+ kit\u003c\/strong\u003e, by Josef Prusa, the renowned RepRap 3D printer developer from the Czech Republic. \u003c\/p\u003e\n\u003cp\u003eThis DIY printer kit can use a wide array of open market filaments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy to upgrade\u003c\/strong\u003e, making it the perfect printer for \"Makers\" who love to modify and customize their own machine.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAll parts of this 3D printer are \u003c\/span\u003eOpen Source and are part of the RepRap project.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFeatures :\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAutomatic XYZ Calibration\u003c\/li\u003e\n\u003cli\u003eAuto-mesh bed leveling\u003c\/li\u003e\n\u003cli\u003eFilament sensor\u003c\/li\u003e\n\u003cli\u003eRemovable, \u003cstrong\u003edouble-sided Smooth PEI\u003c\/strong\u003e print surface\u003c\/li\u003e\n\u003cli\u003eThe magnetic MK52 heatbed can be removed and parts come off easily\u003c\/li\u003e\n\u003cli\u003eAmbient temperature and PINDA probe thermistors for greater accuracy\u003c\/li\u003e\n\u003cli\u003eSilent Noctua cooling fan with RPM detection to prevent errors\u003c\/li\u003e\n\u003cli\u003eOctoprint ready\u003c\/li\u003e\n\u003cli\u003eNew Bondtech drive gear\u003c\/li\u003e\n\u003cli\u003eTrinamic2130 drivers detect lost steps, to correct layer shifting\u003c\/li\u003e\n\u003cli\u003eUp to 200mm\/s print speed!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMk3S+ Features\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eNew SuperPINDA\u003c\/li\u003e\n\u003cli\u003eNew printed extruder parts\u003c\/li\u003e\n\u003cli\u003eNew Bearing Clips for Y-axis bearings\u003c\/li\u003e\n\u003cli\u003eNew IR filament sensor + cable\u003c\/li\u003e\n\u003cli\u003eNew Hotend PTFE Tube\u003c\/li\u003e\n\u003cli\u003eFan shroud printed of ASA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/blog.prusaprinters.org\/november2020_update_original_prusa_i3_mk3splus_miniplus_mini_kit_satin_steel_sheet_40870\/#extruder\"\u003eFull feature list with explanations here \u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch3\u003eDimensions \u0026amp; Weight\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExternal dimensions:  \u003cspan\u003e42 x 42 x 39 cm (16.5 x 16.5 x 15.1 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 6.5 kg (14 lbs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrinting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTechnology : Fused Filament Fabrication (FFF)\u003c\/li\u003e\n\u003cli\u003eBuild dimensions : 250 x 210 x 210 mm (9.8 x 8.3 x 8.3 in)\u003c\/li\u003e\n\u003cli\u003eBuild volume : 11 025 cm3 (675 in3)\u003c\/li\u003e\n\u003cli\u003eLayer height : 50-250 microns (0.05-0.25 mm)\u003c\/li\u003e\n\u003cli\u003eFilament diameter : 1.75 mm\u003c\/li\u003e\n\u003cli\u003eNozzle diameter : 0.4 mm\u003c\/li\u003e\n\u003cli\u003eMaximum nozzle temperature : 300°C\u003c\/li\u003e\n\u003cli\u003ePrint surface : \u003cstrong\u003etextured, powder-coated PEI on double-sided steel sheet\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSoftware\u003c\/h5\u003e\n\u003ch3\u003eSlicing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/slic3r.org\/\" style=\"line-height: 1.5;\" data-mce-style=\"line-height: 1.5;\"\u003eSlic3r\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.simplify3d.com\/\" style=\"line-height: 1.5;\" data-mce-style=\"line-height: 1.5;\"\u003eSimplify3D\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ultimaker.com\/en\/products\/cura-software\" title=\"Cura\" style=\"line-height: 1.5;\" target=\"_blank\" data-mce-style=\"line-height: 1.5;\"\u003eCura\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eControl\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.pronterface.com\/\" title=\"Pronterface\" target=\"_blank\"\u003ePronterface\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFile types\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSTL, OBJ, Gcode\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMaterials\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca title=\"Materio3D PLA\" href=\"https:\/\/www.voxelfactory.com\/collections\/pla-1-75mm-filaments\"\u003e \u003cstrong\u003ePLA\u003c\/strong\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/voxelfactory.com\/collections\/materio3d-pla-1-75mm-filament\" title=\"Materio3D PLA\" target=\"_blank\"\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/asa-1-75mm-filaments\"\u003e\u003cstrong\u003eASA\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/abs-1-75\"\u003e\u003cstrong\u003eABS\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/polycarbonate-1-75mm-filaments\"\u003e\u003cstrong\u003ePC\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/petg-1-75mm-filaments\"\u003e\u003cstrong\u003ePETG\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/flexible-1-75mm-filaments\"\u003e\u003cstrong\u003eFlexible materials\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"Nylon\" href=\"https:\/\/www.voxelfactory.com\/collections\/nylon-1-75mm-filaments\"\u003e\u003cstrong\u003eNylon\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/products\/polymaker-polymide-pa6-cf-1-75mm-2kg?_pos=2\u0026amp;_sid=9db733b92\u0026amp;_ss=r\"\u003eCarbon Fiber\u003c\/a\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.voxelfactory.com\/products\/polymaker-polymide-pa6-gf-1-75mm-2kg?_pos=1\u0026amp;_sid=7b0a21242\u0026amp;_ss=r\"\u003e \u003cstrong\u003eGlass Fiber\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMore info\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/manual.prusa3d.com\/c\/Original_Prusa_i3_MK3S_kit_assembly\" title=\"Prusa i3 MK3S assembly manual at prusa3d.com\" target=\"_blank\"\u003eAssembly instructions at prusa3d.com\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.prusaprinters.org\/original-prusa-i3-mk3-bloody-smart\/\" title=\"Official announcement by Josef Prusa\"\u003eOfficial announcement at prusaprinters.org\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/blog.prusaprinters.org\/november2020_update_original_prusa_i3_mk3splus_miniplus_mini_kit_satin_steel_sheet_40870\/#extruder\"\u003eMk3S+ Announcement at prusaprinters.org\u003c\/a\u003e\u003c\/p\u003e","published_at":"2020-11-26T20:29:13-05:00","created_at":"2020-11-26T12:45:41-05:00","vendor":"Prusa Research","type":"Prusa Research 3D Printers","tags":["3Dprinters","DIY","MK3S+","prusa","RepRap"],"price":99900,"price_min":99900,"price_max":99900,"available":true,"price_varies":false,"compare_at_price":104900,"compare_at_price_min":104900,"compare_at_price_max":104900,"compare_at_price_varies":false,"variants":[{"id":37604402102452,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-3DP-I3M-K3S-PLS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Original Prusa i3 MK3S+ DIY Kit","public_title":null,"options":["Default Title"],"price":99900,"weight":11800,"compare_at_price":104900,"inventory_quantity":-61,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/original-prusa-i3-mk3s-kit-_1.jpg?v=1632227059","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/prusa-research-3d-printers-original-prusa-i3-mk3s-diy-kit-2.jpg?v=1632227073","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/prusa-research-3d-printers-original-prusa-i3-mk3s-diy-kit-4.jpg?v=1632227073","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/prusa-research-3d-printers-original-prusa-i3-mk3s-diy-kit-3.jpg?v=1632227073"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/original-prusa-i3-mk3s-kit-_1.jpg?v=1632227059","options":["Title"],"media":[{"alt":null,"id":22930582372532,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1050,"width":1400,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/original-prusa-i3-mk3s-kit-_1.jpg?v=1632227059"},"aspect_ratio":1.333,"height":1050,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/original-prusa-i3-mk3s-kit-_1.jpg?v=1632227059","width":1400},{"alt":"Prusa Research 3D Printers - Original Prusa I3 MK3S+ DIY Kit","id":15393979072692,"position":2,"preview_image":{"aspect_ratio":1.333,"height":768,"width":1024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/prusa-research-3d-printers-original-prusa-i3-mk3s-diy-kit-2.jpg?v=1632227073"},"aspect_ratio":1.333,"height":768,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/prusa-research-3d-printers-original-prusa-i3-mk3s-diy-kit-2.jpg?v=1632227073","width":1024},{"alt":"Prusa Research 3D Printers - Original Prusa I3 MK3S+ DIY Kit","id":15393979433140,"position":3,"preview_image":{"aspect_ratio":1.333,"height":768,"width":1024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/prusa-research-3d-printers-original-prusa-i3-mk3s-diy-kit-4.jpg?v=1632227073"},"aspect_ratio":1.333,"height":768,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/prusa-research-3d-printers-original-prusa-i3-mk3s-diy-kit-4.jpg?v=1632227073","width":1024},{"alt":"Prusa Research 3D Printers - Original Prusa I3 MK3S+ DIY Kit","id":15393979170996,"position":4,"preview_image":{"aspect_ratio":1.333,"height":768,"width":1024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/prusa-research-3d-printers-original-prusa-i3-mk3s-diy-kit-3.jpg?v=1632227073"},"aspect_ratio":1.333,"height":768,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/prusa-research-3d-printers-original-prusa-i3-mk3s-diy-kit-3.jpg?v=1632227073","width":1024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan style=\"color: #ff2a00;\" data-mce-fragment=\"1\" data-mce-style=\"color: #ff2a00;\" mce-data-marked=\"1\"\u003eETA St-Hubert : December 13 to december 17\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan style=\"color: #ff2a00;\" data-mce-fragment=\"1\" data-mce-style=\"color: #ff2a00;\" mce-data-marked=\"1\"\u003eETA Burnaby : UNKNOWN (Presales will ship from St-Hubert IF POSSIBLE)\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan style=\"color: #ff2a00;\" data-mce-fragment=\"1\" data-mce-style=\"color: #ff2a00;\" mce-data-marked=\"1\"\u003eSIGNATURE REQUIRED ON DELIVERY - YOU MIGHT HAVE TO GO PICK IT UP AT YOUR LOCAL POST OFFICE IF YOU ARE ABSENT ON DELIVERY DAY\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\" mce-data-marked=\"1\"\u003eOriginal Prusa i3 MK3S+ \u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\" mce-data-marked=\"1\"\u003eIntroducing the SuperPINDA and a number of small changes. X and Y axes have slightly improved, plastic parts and u-bolts were changed to metal clips which are easier to mount. A number of minor changes were done to the extruder plastic parts to improve overall reliability.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #00aaff;\"\u003e\u003ca style=\"color: #00aaff;\" href=\"https:\/\/blog.prusaprinters.org\/november2020_update_original_prusa_i3_mk3splus_miniplus_mini_kit_satin_steel_sheet_40870\/#extruder\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eBlog post highlighting the new changes\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePrusa Silver PLA filament included!\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003c\/b\u003e\u003cspan style=\"color: #ff0000;\" data-mce-style=\"color: #ff0000;\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003eDIY kit – Assembly required, tools included, no soldering needed.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAll printer kits now ship with the Smooth PEI spring steel sheet, if you want the textured powder-coated PEI spring steel sheet it is \u003ca href=\"https:\/\/www.voxelfactory.com\/products\/textured-powder-coated-spring-steel-sheet-for-prusa-i3-mk3?_pos=1\u0026amp;_sid=a0d1f1eb2\u0026amp;_ss=r\" title=\"Textured sheet for Prusa i3 MK3S+\"\u003eavailable separately\u003c\/a\u003e upon request (email us!).\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOriginal Prusa design i3 MK3S+ kit\u003c\/strong\u003e, by Josef Prusa, the renowned RepRap 3D printer developer from the Czech Republic. \u003c\/p\u003e\n\u003cp\u003eThis DIY printer kit can use a wide array of open market filaments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy to upgrade\u003c\/strong\u003e, making it the perfect printer for \"Makers\" who love to modify and customize their own machine.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAll parts of this 3D printer are \u003c\/span\u003eOpen Source and are part of the RepRap project.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFeatures :\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAutomatic XYZ Calibration\u003c\/li\u003e\n\u003cli\u003eAuto-mesh bed leveling\u003c\/li\u003e\n\u003cli\u003eFilament sensor\u003c\/li\u003e\n\u003cli\u003eRemovable, \u003cstrong\u003edouble-sided Smooth PEI\u003c\/strong\u003e print surface\u003c\/li\u003e\n\u003cli\u003eThe magnetic MK52 heatbed can be removed and parts come off easily\u003c\/li\u003e\n\u003cli\u003eAmbient temperature and PINDA probe thermistors for greater accuracy\u003c\/li\u003e\n\u003cli\u003eSilent Noctua cooling fan with RPM detection to prevent errors\u003c\/li\u003e\n\u003cli\u003eOctoprint ready\u003c\/li\u003e\n\u003cli\u003eNew Bondtech drive gear\u003c\/li\u003e\n\u003cli\u003eTrinamic2130 drivers detect lost steps, to correct layer shifting\u003c\/li\u003e\n\u003cli\u003eUp to 200mm\/s print speed!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMk3S+ Features\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eNew SuperPINDA\u003c\/li\u003e\n\u003cli\u003eNew printed extruder parts\u003c\/li\u003e\n\u003cli\u003eNew Bearing Clips for Y-axis bearings\u003c\/li\u003e\n\u003cli\u003eNew IR filament sensor + cable\u003c\/li\u003e\n\u003cli\u003eNew Hotend PTFE Tube\u003c\/li\u003e\n\u003cli\u003eFan shroud printed of ASA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/blog.prusaprinters.org\/november2020_update_original_prusa_i3_mk3splus_miniplus_mini_kit_satin_steel_sheet_40870\/#extruder\"\u003eFull feature list with explanations here \u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch3\u003eDimensions \u0026amp; Weight\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExternal dimensions:  \u003cspan\u003e42 x 42 x 39 cm (16.5 x 16.5 x 15.1 inches)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 6.5 kg (14 lbs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrinting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTechnology : Fused Filament Fabrication (FFF)\u003c\/li\u003e\n\u003cli\u003eBuild dimensions : 250 x 210 x 210 mm (9.8 x 8.3 x 8.3 in)\u003c\/li\u003e\n\u003cli\u003eBuild volume : 11 025 cm3 (675 in3)\u003c\/li\u003e\n\u003cli\u003eLayer height : 50-250 microns (0.05-0.25 mm)\u003c\/li\u003e\n\u003cli\u003eFilament diameter : 1.75 mm\u003c\/li\u003e\n\u003cli\u003eNozzle diameter : 0.4 mm\u003c\/li\u003e\n\u003cli\u003eMaximum nozzle temperature : 300°C\u003c\/li\u003e\n\u003cli\u003ePrint surface : \u003cstrong\u003etextured, powder-coated PEI on double-sided steel sheet\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSoftware\u003c\/h5\u003e\n\u003ch3\u003eSlicing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/slic3r.org\/\" style=\"line-height: 1.5;\" data-mce-style=\"line-height: 1.5;\"\u003eSlic3r\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.simplify3d.com\/\" style=\"line-height: 1.5;\" data-mce-style=\"line-height: 1.5;\"\u003eSimplify3D\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ultimaker.com\/en\/products\/cura-software\" title=\"Cura\" style=\"line-height: 1.5;\" target=\"_blank\" data-mce-style=\"line-height: 1.5;\"\u003eCura\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eControl\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.pronterface.com\/\" title=\"Pronterface\" target=\"_blank\"\u003ePronterface\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFile types\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSTL, OBJ, Gcode\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMaterials\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca title=\"Materio3D PLA\" href=\"https:\/\/www.voxelfactory.com\/collections\/pla-1-75mm-filaments\"\u003e \u003cstrong\u003ePLA\u003c\/strong\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/voxelfactory.com\/collections\/materio3d-pla-1-75mm-filament\" title=\"Materio3D PLA\" target=\"_blank\"\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/asa-1-75mm-filaments\"\u003e\u003cstrong\u003eASA\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/abs-1-75\"\u003e\u003cstrong\u003eABS\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/polycarbonate-1-75mm-filaments\"\u003e\u003cstrong\u003ePC\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/petg-1-75mm-filaments\"\u003e\u003cstrong\u003ePETG\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/collections\/flexible-1-75mm-filaments\"\u003e\u003cstrong\u003eFlexible materials\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"Nylon\" href=\"https:\/\/www.voxelfactory.com\/collections\/nylon-1-75mm-filaments\"\u003e\u003cstrong\u003eNylon\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.voxelfactory.com\/products\/polymaker-polymide-pa6-cf-1-75mm-2kg?_pos=2\u0026amp;_sid=9db733b92\u0026amp;_ss=r\"\u003eCarbon Fiber\u003c\/a\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.voxelfactory.com\/products\/polymaker-polymide-pa6-gf-1-75mm-2kg?_pos=1\u0026amp;_sid=7b0a21242\u0026amp;_ss=r\"\u003e \u003cstrong\u003eGlass Fiber\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMore info\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/manual.prusa3d.com\/c\/Original_Prusa_i3_MK3S_kit_assembly\" title=\"Prusa i3 MK3S assembly manual at prusa3d.com\" target=\"_blank\"\u003eAssembly instructions at prusa3d.com\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.prusaprinters.org\/original-prusa-i3-mk3-bloody-smart\/\" title=\"Official announcement by Josef Prusa\"\u003eOfficial announcement at prusaprinters.org\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/blog.prusaprinters.org\/november2020_update_original_prusa_i3_mk3splus_miniplus_mini_kit_satin_steel_sheet_40870\/#extruder\"\u003eMk3S+ Announcement at prusaprinters.org\u003c\/a\u003e\u003c\/p\u003e"}

{"id":1812003815542,"title":"Spring Steel Sheet with Smooth Double-sided PEI for Prusa i3 MK3","handle":"replacement-spring-steel-sheet-with-double-sided-pei-for-prusa-i3-mk3","description":"\u003cp\u003eSpring steel sheet with smooth, double-sided PEI coating. Printing surface for the \u003ca href=\"\/products\/original-reprap-prusa-i3-mk3s-diy-kit\" target=\"_blank\" title=\"Original Prusa i3 MK3S DIY kit\" rel=\"noopener noreferrer\"\u003ePrusa i3 MK3 \/ MK3S\u003c\/a\u003e 3D printers, to be used in conjunction with the MK52 magnetic heatbed.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/products\/textured-powder-coated-spring-steel-sheet-for-prusa-i3-mk3\" target=\"_blank\" title=\"Textured powder-coated spring steel sheet for Prusa i3 MK3 \/ MK3S\" rel=\"noopener noreferrer\"\u003eTextured, powder-coated spring steel sheet\u003c\/a\u003e also available.\u003c\/p\u003e","published_at":"2019-08-11T10:56:01-04:00","created_at":"2018-07-13T15:18:26-04:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":["prusa","spare parts"],"price":5999,"price_min":5999,"price_max":5999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16496652583030,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-SSS-SMT-PEI-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spring Steel Sheet with Smooth Double-sided PEI for Prusa i3 MK3","public_title":null,"options":["Default Title"],"price":5999,"weight":500,"compare_at_price":null,"inventory_quantity":83,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/prusa-research-parts-spring-steel-sheet-with-smooth-double-sided-pei-for-prusa-i3-mk3-1.jpg?v=1579896080"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/prusa-research-parts-spring-steel-sheet-with-smooth-double-sided-pei-for-prusa-i3-mk3-1.jpg?v=1579896080","options":["Title"],"media":[{"alt":null,"id":6013049143414,"position":1,"preview_image":{"aspect_ratio":1.333,"height":459,"width":612,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/prusa-research-parts-spring-steel-sheet-with-smooth-double-sided-pei-for-prusa-i3-mk3-1.jpg?v=1579896080"},"aspect_ratio":1.333,"height":459,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/prusa-research-parts-spring-steel-sheet-with-smooth-double-sided-pei-for-prusa-i3-mk3-1.jpg?v=1579896080","width":612}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eSpring steel sheet with smooth, double-sided PEI coating. Printing surface for the \u003ca href=\"\/products\/original-reprap-prusa-i3-mk3s-diy-kit\" target=\"_blank\" title=\"Original Prusa i3 MK3S DIY kit\" rel=\"noopener noreferrer\"\u003ePrusa i3 MK3 \/ MK3S\u003c\/a\u003e 3D printers, to be used in conjunction with the MK52 magnetic heatbed.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/products\/textured-powder-coated-spring-steel-sheet-for-prusa-i3-mk3\" target=\"_blank\" title=\"Textured powder-coated spring steel sheet for Prusa i3 MK3 \/ MK3S\" rel=\"noopener noreferrer\"\u003eTextured, powder-coated spring steel sheet\u003c\/a\u003e also available.\u003c\/p\u003e"}

{"id":10411346953,"title":"Hotend thermistor for Prusa i3 MK2 and MK3","handle":"replacement-thermistor-for-prusa-i3-mk2","description":"Replacement hotend thermistor for the Prusa i3 MK2\/S and \u003ca href=\"\/products\/original-reprap-prusa-i3-mk3s-diy-kit\" target=\"_blank\" title=\"Original Prusa i3 MK3S 3D printer kit at voxelfactory.com\" rel=\"noopener noreferrer\"\u003eMK3\/S\u003c\/a\u003e. Fully wired and ready to be installed.","published_at":"2017-12-13T14:22:44-05:00","created_at":"2017-09-11T12:56:47-04:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":["mk2","mk2s","mk3","mk3s","prusa","spare parts","thermistor"],"price":1499,"price_min":1499,"price_max":1499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45180568201,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-THR-E3D-000-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Hotend thermistor for Prusa i3 MK2 and MK3","public_title":null,"options":["Default Title"],"price":1499,"weight":100,"compare_at_price":null,"inventory_quantity":39,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/prusa-research-parts-replacement-thermistor-for-prusa-i3-mk2s-and-mk3-1.jpeg?v=1549420068"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/prusa-research-parts-replacement-thermistor-for-prusa-i3-mk2s-and-mk3-1.jpeg?v=1549420068","options":["Title"],"media":[{"alt":"Prusa Research Parts - Replacement Thermistor For Prusa I3 MK2S And MK3","id":82345132150,"position":1,"preview_image":{"aspect_ratio":1.333,"height":300,"width":400,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/prusa-research-parts-replacement-thermistor-for-prusa-i3-mk2s-and-mk3-1.jpeg?v=1549420068"},"aspect_ratio":1.333,"height":300,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/prusa-research-parts-replacement-thermistor-for-prusa-i3-mk2s-and-mk3-1.jpeg?v=1549420068","width":400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"Replacement hotend thermistor for the Prusa i3 MK2\/S and \u003ca href=\"\/products\/original-reprap-prusa-i3-mk3s-diy-kit\" target=\"_blank\" title=\"Original Prusa i3 MK3S 3D printer kit at voxelfactory.com\" rel=\"noopener noreferrer\"\u003eMK3\/S\u003c\/a\u003e. Fully wired and ready to be installed."}

{"id":397267696,"title":"Smooth-On XTC-3D® High Performance Coating","handle":"xtc-3d-high-performance-3d-print-coating","description":"\u003cdiv\u003e\u003cstrong\u003e* 6.4 oz or 24 oz\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e** For industrial use only\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e*** SLA\/SLS prints, FDM Prints (ABS, PLA, Laywoo-D3, WoodFill, T-GLASE etc.)\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan style=\"color: #000000;\"\u003e\u003ca href=\"http:\/\/www.taulman3d.com\/t-glase-optics.html\" title=\"Hacking t-glase to look more like glass!\" style=\"color: #000000;\"\u003e\u003cstrong\u003e\u003cspan size=\"6\" color=\"#105767\" style=\"font-size: large;\"\u003e*** -\u0026gt; Hacking t-glase to look more like glass! \u0026lt;- ***\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eXTC-3D®\u003c\/strong\u003e\u003cspan\u003e is a protective coating for smoothing and finishing 3D printed parts. Two liquids are mixed together and brushed onto any 3D print. Coating self-levels and wets out uniformly without leaving brush strokes. Working time is 10 minutes and cure time is about 4 hours (depending on mass and temperature). XTC-3D® cures to a hard, impact resistant coating that can be sanded, primed and painted. Adding colors and metal effects is easy.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003eInexpensive to Use:\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e 1 oz covers 100+ square inches.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003e90% Time \u0026amp; Labor Savings:\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e XTC-3D® fills in 3D print striations and creates a smooth, high gloss finish. The need to post finish is almost eliminated.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003eCoat any 3D Print Surface:\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e XTC-3D® can be applied to both SLA and SLS prints. It works with PLA, ABS, Laywood, Powder Printed Parts and other rigid media. It also can be used to coat EPS, EPDM and urethane foam as well as wood, plaster, fabric, cardboard and paper.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eXTC-3D® does not contain VOC's, phthalates or phosphates.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca href=\"http:\/\/www.smooth-on.com\/index\/view_tb.php?products_id=302\"\u003e\u003cimg src=\"http:\/\/www.smooth-on.com\/images\/button_icon_tb.gif\" border=\"0\" alt=\"Technical\" bulletin=\"\"\u003e\u003c\/a\u003e\u003ca href=\"http:\/\/www.smooth-on.com\/index\/view_msds.php?products_id=302\"\u003e\u003cimg src=\"http:\/\/www.smooth-on.com\/images\/button_icon_msds.gif\" border=\"0\" alt=\"MSDS\"\u003e\u003c\/a\u003e\u003ca href=\"http:\/\/www.smooth-on.com\/index.php?cPath=1397_1429#media\"\u003e\u003cimg src=\"http:\/\/www.smooth-on.com\/images\/button_icon_media.gif\" border=\"0\"\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e","published_at":"2014-12-23T10:02:00-05:00","created_at":"2014-12-23T10:11:58-05:00","vendor":"Smooth-On","type":"Tools","tags":["tools"],"price":1695,"price_min":1695,"price_max":4395,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":1072896796,"title":"6.4 Oz","option1":"6.4 Oz","option2":null,"option3":null,"sku":"SMO-XTC-COA-064-OOZ","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Smooth-On XTC-3D® High Performance Coating - 6.4 Oz","public_title":"6.4 Oz","options":["6.4 Oz"],"price":1695,"weight":500,"compare_at_price":null,"inventory_quantity":17,"inventory_management":"shopify","inventory_policy":"deny","barcode":"751635696211","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":3620344261,"title":"24 Oz","option1":"24 Oz","option2":null,"option3":null,"sku":"SMO-XTC-COA-240-OOZ","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Smooth-On XTC-3D® High Performance Coating - 24 Oz","public_title":"24 Oz","options":["24 Oz"],"price":4395,"weight":1000,"compare_at_price":null,"inventory_quantity":44,"inventory_management":"shopify","inventory_policy":"deny","barcode":"751635696419","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/tools-smooth-on-xtc-3d-high-performance-coating-1.jpg?v=1539828439","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/tools-smooth-on-xtc-3d-high-performance-coating-2.jpg?v=1539828439","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/tools-smooth-on-xtc-3d-high-performance-coating-3.jpg?v=1539828440"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/tools-smooth-on-xtc-3d-high-performance-coating-1.jpg?v=1539828439","options":["Size"],"media":[{"alt":"Tools - Smooth-On XTC-3D® High Performance Coating","id":4949114998,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1024,"width":1365,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/tools-smooth-on-xtc-3d-high-performance-coating-1.jpg?v=1539828439"},"aspect_ratio":1.333,"height":1024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/tools-smooth-on-xtc-3d-high-performance-coating-1.jpg?v=1539828439","width":1365},{"alt":"Tools - Smooth-On XTC-3D® High Performance Coating","id":4949147766,"position":2,"preview_image":{"aspect_ratio":1.333,"height":768,"width":1024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/tools-smooth-on-xtc-3d-high-performance-coating-2.jpg?v=1539828439"},"aspect_ratio":1.333,"height":768,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/tools-smooth-on-xtc-3d-high-performance-coating-2.jpg?v=1539828439","width":1024},{"alt":"Tools - Smooth-On XTC-3D® High Performance Coating","id":4949180534,"position":3,"preview_image":{"aspect_ratio":1.073,"height":800,"width":858,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/tools-smooth-on-xtc-3d-high-performance-coating-3.jpg?v=1539828440"},"aspect_ratio":1.073,"height":800,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/tools-smooth-on-xtc-3d-high-performance-coating-3.jpg?v=1539828440","width":858}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv\u003e\u003cstrong\u003e* 6.4 oz or 24 oz\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e** For industrial use only\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e*** SLA\/SLS prints, FDM Prints (ABS, PLA, Laywoo-D3, WoodFill, T-GLASE etc.)\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan style=\"color: #000000;\"\u003e\u003ca href=\"http:\/\/www.taulman3d.com\/t-glase-optics.html\" title=\"Hacking t-glase to look more like glass!\" style=\"color: #000000;\"\u003e\u003cstrong\u003e\u003cspan size=\"6\" color=\"#105767\" style=\"font-size: large;\"\u003e*** -\u0026gt; Hacking t-glase to look more like glass! \u0026lt;- ***\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eXTC-3D®\u003c\/strong\u003e\u003cspan\u003e is a protective coating for smoothing and finishing 3D printed parts. Two liquids are mixed together and brushed onto any 3D print. Coating self-levels and wets out uniformly without leaving brush strokes. Working time is 10 minutes and cure time is about 4 hours (depending on mass and temperature). XTC-3D® cures to a hard, impact resistant coating that can be sanded, primed and painted. Adding colors and metal effects is easy.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003eInexpensive to Use:\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e 1 oz covers 100+ square inches.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003e90% Time \u0026amp; Labor Savings:\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e XTC-3D® fills in 3D print striations and creates a smooth, high gloss finish. The need to post finish is almost eliminated.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003eCoat any 3D Print Surface:\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e XTC-3D® can be applied to both SLA and SLS prints. It works with PLA, ABS, Laywood, Powder Printed Parts and other rigid media. It also can be used to coat EPS, EPDM and urethane foam as well as wood, plaster, fabric, cardboard and paper.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eXTC-3D® does not contain VOC's, phthalates or phosphates.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca href=\"http:\/\/www.smooth-on.com\/index\/view_tb.php?products_id=302\"\u003e\u003cimg src=\"http:\/\/www.smooth-on.com\/images\/button_icon_tb.gif\" border=\"0\" alt=\"Technical\" bulletin=\"\"\u003e\u003c\/a\u003e\u003ca href=\"http:\/\/www.smooth-on.com\/index\/view_msds.php?products_id=302\"\u003e\u003cimg src=\"http:\/\/www.smooth-on.com\/images\/button_icon_msds.gif\" border=\"0\" alt=\"MSDS\"\u003e\u003c\/a\u003e\u003ca href=\"http:\/\/www.smooth-on.com\/index.php?cPath=1397_1429#media\"\u003e\u003cimg src=\"http:\/\/www.smooth-on.com\/images\/button_icon_media.gif\" border=\"0\"\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e"}

{"id":8859304521,"title":"Brass Nozzle 0.40mm for E3D V6 Hot End","handle":"brass-nozzle-0-4mm-for-e3d-v6-hot-end","description":"\u003cp\u003e0.40mm brass nozzle for E3D v6 hotends.\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003eMaterial : \u003cstrong\u003eBrass\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOpening diameter : \u003cstrong\u003e0.40mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFilament diameter : \u003cstrong\u003e1.75mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThread : \u003cstrong\u003eM6\u003c\/strong\u003e\u003c\/p\u003e","published_at":"2017-12-13T14:22:44-05:00","created_at":"2017-02-13T15:00:27-05:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":["0.4mm","e3d","mk2","mk2s","mk3","mk3s","nozzle"],"price":999,"price_min":999,"price_max":999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30803869129,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-NOZ-E3D-HOT-040","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Brass Nozzle 0.40mm for E3D V6 Hot End","public_title":null,"options":["Default Title"],"price":999,"weight":100,"compare_at_price":null,"inventory_quantity":57,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/prusa-research-parts-brass-nozzle-0-40mm-for-e3d-v6-hot-end-1.jpeg?v=1579896021"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/prusa-research-parts-brass-nozzle-0-40mm-for-e3d-v6-hot-end-1.jpeg?v=1579896021","options":["Title"],"media":[{"alt":null,"id":6013044260982,"position":1,"preview_image":{"aspect_ratio":1.333,"height":450,"width":600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/prusa-research-parts-brass-nozzle-0-40mm-for-e3d-v6-hot-end-1.jpeg?v=1579896021"},"aspect_ratio":1.333,"height":450,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/prusa-research-parts-brass-nozzle-0-40mm-for-e3d-v6-hot-end-1.jpeg?v=1579896021","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e0.40mm brass nozzle for E3D v6 hotends.\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003eMaterial : \u003cstrong\u003eBrass\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOpening diameter : \u003cstrong\u003e0.40mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFilament diameter : \u003cstrong\u003e1.75mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThread : \u003cstrong\u003eM6\u003c\/strong\u003e\u003c\/p\u003e"}

{"id":3874371698806,"title":"3DLAC Plus Adhesive Solution 100mL","handle":"3dlac-plus-adhesive-solution","description":"\u003cp\u003eThe polyvalent adhesion solution for your 3D printing needs. Use with \u003ca href=\"\/products\/3m-2090-scotch-blue-painters-tape-48mm-x-54-8m\" title=\"Blue Painter's Tape at Voxel Factory\" target=\"_blank\"\u003eblue painter's tape\u003c\/a\u003e on a cold print bed, or directly on glass or PEI-covered heatbeds to maximize part adhesion, prevent warping and reduce print failures. \u003cspan\u003eUseful for printing PLA, ABS, polycarbonate, PETG, copolyester, and more!\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eUnlike its sibling the \u003ca href=\"https:\/\/voxelfactory.com\/collections\/tools\/products\/3dlac-tapes-replacement-to-make-abs-pla-and-_xt-stick-properly-to-heated-glass\" title=\"3DLAC Spray at Voxel Factory\"\u003e3DLAC Spray\u003c\/a\u003e, this bottle is not pressurized, and can be shipped by air in limited quantities.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDoes not work with Nylon, use PVA glue stick (like Elmer's) instead.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eVolume :\u003cb\u003e 100mL\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eContents : Isopropyl alcohol - Methylal - Isobutane - Propane - VP\/VA copolymer - Alcohol denat - Parfum (Benzyl alcohol, Benzyl salicilate, Coumarin, Geraniol, Butylphenyl Methylpropional, Linalool, Benzyl benzoate, Citronellol, Alphaisomethylionone, Hydroxycitronellal, Amyl cinnamal)\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ffffff;\"\u003e\u003cb\u003e3D Lac\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e","published_at":"2019-06-20T17:21:40-04:00","created_at":"2019-06-20T13:48:47-04:00","vendor":"LABORATORIOS 3D PRINT, S.L.","type":"Tools","tags":["3DLac","adhesive","tools"],"price":999,"price_min":999,"price_max":999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29203505315958,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LAB-ADH-3DL-BTL-100","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"3DLAC Plus Adhesive Solution 100mL","public_title":null,"options":["Default Title"],"price":999,"weight":300,"compare_at_price":null,"inventory_quantity":903,"inventory_management":"shopify","inventory_policy":"deny","barcode":"8411322240500","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/tools-3dlac-plus-adhesive-solution-100ml-1.jpg?v=1579896312"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/tools-3dlac-plus-adhesive-solution-100ml-1.jpg?v=1579896312","options":["Title"],"media":[{"alt":null,"id":6013065756790,"position":1,"preview_image":{"aspect_ratio":1.333,"height":600,"width":800,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/tools-3dlac-plus-adhesive-solution-100ml-1.jpg?v=1579896312"},"aspect_ratio":1.333,"height":600,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/tools-3dlac-plus-adhesive-solution-100ml-1.jpg?v=1579896312","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThe polyvalent adhesion solution for your 3D printing needs. Use with \u003ca href=\"\/products\/3m-2090-scotch-blue-painters-tape-48mm-x-54-8m\" title=\"Blue Painter's Tape at Voxel Factory\" target=\"_blank\"\u003eblue painter's tape\u003c\/a\u003e on a cold print bed, or directly on glass or PEI-covered heatbeds to maximize part adhesion, prevent warping and reduce print failures. \u003cspan\u003eUseful for printing PLA, ABS, polycarbonate, PETG, copolyester, and more!\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eUnlike its sibling the \u003ca href=\"https:\/\/voxelfactory.com\/collections\/tools\/products\/3dlac-tapes-replacement-to-make-abs-pla-and-_xt-stick-properly-to-heated-glass\" title=\"3DLAC Spray at Voxel Factory\"\u003e3DLAC Spray\u003c\/a\u003e, this bottle is not pressurized, and can be shipped by air in limited quantities.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDoes not work with Nylon, use PVA glue stick (like Elmer's) instead.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eVolume :\u003cb\u003e 100mL\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eContents : Isopropyl alcohol - Methylal - Isobutane - Propane - VP\/VA copolymer - Alcohol denat - Parfum (Benzyl alcohol, Benzyl salicilate, Coumarin, Geraniol, Butylphenyl Methylpropional, Linalool, Benzyl benzoate, Citronellol, Alphaisomethylionone, Hydroxycitronellal, Amyl cinnamal)\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ffffff;\"\u003e\u003cb\u003e3D Lac\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e"}

{"id":3931939766390,"title":"Textured Powder-Coated Spring Steel Sheet for Prusa i3 MK3","handle":"textured-powder-coated-spring-steel-sheet-for-prusa-i3-mk3","description":"Original spring steel sheet, double-sided with textured, powder-coated PEI surface. To be used with the Prusa i3 MK3 \/ MK3S 3D printer.","published_at":"2019-09-09T11:54:14-04:00","created_at":"2019-07-18T17:34:42-04:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":["mk3","MK3S","prusa","spare parts"],"price":6999,"price_min":6999,"price_max":6999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29406152556662,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-SSS-TXT-PEI-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Textured Powder-Coated Spring Steel Sheet for Prusa i3 MK3","public_title":null,"options":["Default Title"],"price":6999,"weight":500,"compare_at_price":null,"inventory_quantity":119,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/prusa-research-parts-textured-powder-coated-spring-steel-sheet-for-prusa-i3-mk3-1.jpeg?v=1579896314"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/prusa-research-parts-textured-powder-coated-spring-steel-sheet-for-prusa-i3-mk3-1.jpeg?v=1579896314","options":["Title"],"media":[{"alt":null,"id":6013065920630,"position":1,"preview_image":{"aspect_ratio":1.333,"height":600,"width":800,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/prusa-research-parts-textured-powder-coated-spring-steel-sheet-for-prusa-i3-mk3-1.jpeg?v=1579896314"},"aspect_ratio":1.333,"height":600,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/prusa-research-parts-textured-powder-coated-spring-steel-sheet-for-prusa-i3-mk3-1.jpeg?v=1579896314","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"Original spring steel sheet, double-sided with textured, powder-coated PEI surface. To be used with the Prusa i3 MK3 \/ MK3S 3D printer."}

{"id":1632151240822,"title":"E3D Heater Cartridge 24V for Prusa i3 MK3\/S","handle":"replacement-e3d-heater-cartridge-24v-for-prusa-i3-mk3","description":"\u003cp\u003eReplacement heater cartridge for the \u003ca href=\"\/products\/original-reprap-prusa-i3-mk3s-diy-kit\" title=\"Original Prusa i3 MK3S 3D printer kit\" target=\"_blank\"\u003ePrusa i3 MK3 or MK3S\u003c\/a\u003e and Prusa Mini. Fully wired and ready to be installed.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe heater cartridge is ready to fit to a Molex 0395300002 connector (not included, see accessories); you can reuse the one already on your board if replacing an existing heater cartridge.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePower : \u003cstrong\u003e40W 24V\u003c\/strong\u003e\u003c\/p\u003e","published_at":"2017-12-13T14:22:45-05:00","created_at":"2018-06-26T15:13:03-04:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":["e3d","Hardware","Hotend","mk3","MK3S+","prusa"],"price":1199,"price_min":1199,"price_max":1199,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":14699569348726,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-HTC-E3D-040-24V","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"E3D Heater Cartridge 24V for Prusa i3 MK3\/S","public_title":null,"options":["Default Title"],"price":1199,"weight":100,"compare_at_price":null,"inventory_quantity":209,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/prusa-research-parts-replacement-e3d-heater-cartridge-24v-for-prusa-i3-mk3-1.jpeg?v=1549417517"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/prusa-research-parts-replacement-e3d-heater-cartridge-24v-for-prusa-i3-mk3-1.jpeg?v=1549417517","options":["Title"],"media":[{"alt":"Prusa Research Parts - Replacement E3D Heater Cartridge 24V For Prusa I3 MK3","id":3815913029750,"position":1,"preview_image":{"aspect_ratio":1.333,"height":600,"width":800,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/prusa-research-parts-replacement-e3d-heater-cartridge-24v-for-prusa-i3-mk3-1.jpeg?v=1549417517"},"aspect_ratio":1.333,"height":600,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/prusa-research-parts-replacement-e3d-heater-cartridge-24v-for-prusa-i3-mk3-1.jpeg?v=1549417517","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eReplacement heater cartridge for the \u003ca href=\"\/products\/original-reprap-prusa-i3-mk3s-diy-kit\" title=\"Original Prusa i3 MK3S 3D printer kit\" target=\"_blank\"\u003ePrusa i3 MK3 or MK3S\u003c\/a\u003e and Prusa Mini. Fully wired and ready to be installed.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe heater cartridge is ready to fit to a Molex 0395300002 connector (not included, see accessories); you can reuse the one already on your board if replacing an existing heater cartridge.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePower : \u003cstrong\u003e40W 24V\u003c\/strong\u003e\u003c\/p\u003e"}

{"id":760333434998,"title":"Bed Thermistor for Prusa i3 MK2 and MK3","handle":"replacement-bed-thermistor-for-prusa-i3-mk3","description":"Replacement thermistor for the Prusa i3 MK2\/S and \u003ca href=\"\/products\/original-reprap-prusa-i3-mk3s-diy-kit\" target=\"_blank\" title=\"Original Prusa i3 MK3S 3D printer kit at voxelfactory.com\" rel=\"noopener noreferrer\"\u003eMK3\/S\u003c\/a\u003e. Fully wired and ready to be installed.","published_at":"2017-12-13T14:22:44-05:00","created_at":"2018-04-24T14:17:29-04:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":["mk2","mk2s","mk3","MK3S+","prusa","spare parts","thermistor"],"price":999,"price_min":999,"price_max":999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":8128603160694,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-THR-BED-MK3-000","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Bed Thermistor for Prusa i3 MK2 and MK3","public_title":null,"options":["Default Title"],"price":999,"weight":100,"compare_at_price":null,"inventory_quantity":176,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/prusa-research-parts-replacement-bed-thermistor-for-prusa-i3-mk3-1.jpeg?v=1539829450"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/prusa-research-parts-replacement-bed-thermistor-for-prusa-i3-mk3-1.jpeg?v=1539829450","options":["Title"],"media":[{"alt":"Prusa Research Parts - Replacement Bed Thermistor For Prusa I3 MK3","id":3815912538230,"position":1,"preview_image":{"aspect_ratio":1.333,"height":600,"width":800,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/prusa-research-parts-replacement-bed-thermistor-for-prusa-i3-mk3-1.jpeg?v=1539829450"},"aspect_ratio":1.333,"height":600,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/prusa-research-parts-replacement-bed-thermistor-for-prusa-i3-mk3-1.jpeg?v=1539829450","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"Replacement thermistor for the Prusa i3 MK2\/S and \u003ca href=\"\/products\/original-reprap-prusa-i3-mk3s-diy-kit\" target=\"_blank\" title=\"Original Prusa i3 MK3S 3D printer kit at voxelfactory.com\" rel=\"noopener noreferrer\"\u003eMK3\/S\u003c\/a\u003e. Fully wired and ready to be installed."}

{"id":2634788569206,"title":"Hotend PTFE Tubing for Prusa i3 MK3S","handle":"replacement-hotend-ptfe-tubing-for-prusa-i3-mk3s","description":"\u003cp\u003e\u003cspan\u003eReplacement hotend PTFE tubing\u003c\/span\u003e for Prusa i3 \u003cstrong\u003eMK3S \/ MK2.5S \/ MMU2S\u003c\/strong\u003e. \u003cspan\u003eThe tube is trimmed and chamfered for a perfect fit with the existing components.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eNot compatible with Prusa i3 MK2 \/ MK2S \/ MK.25 \/ MK3 \/ MMU2, Mk3s+ use \u003ca href=\"\/products\/replacement-hotend-ptfe-tubing-for-prusa-i3\" title=\"Hotend PTFE tube for Prusa i3 MK2 \/ MK2S \/ MK2.5 \/ MK3\" target=\"_blank\"\u003ethis tube\u003c\/a\u003e instead. \u003cstrong\u003eFor the Mk3s+\u003c\/strong\u003e use \u003ca href=\"https:\/\/www.voxelfactory.com\/products\/hotend-ptfe-tubeing-for-the-mk3s-mmu2s?_pos=1\u0026amp;_sid=3aa23f952\u0026amp;_ss=r\"\u003ethis tube\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 44.3mm (tolerance +\/- 0.2 mm)\u003c\/li\u003e\n\u003cli\u003eInner diameter: 1.85 mm\u003c\/li\u003e\n\u003cli\u003eOuter diameter: 4 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/manual.prusa3d.com\/Guide\/How+to+trim+PTFE+tube+-+Original+Prusa+i3+printers\/500?lang=en\" title=\"Technical drawings for PTFE tubes for Prusa i3 3D printers at prusa3d.com\"\u003e\u003cspan\u003eTechnical drawings\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e for the various PTFE tubes used on Prusa i3 3D printers are available on the Prusa Research website.\u003c\/span\u003e\u003c\/p\u003e","published_at":"2019-09-06T14:22:34-04:00","created_at":"2019-04-12T11:30:47-04:00","vendor":"Prusa Research","type":"Prusa Research Parts","tags":["mk3s","mmu2s","prusa","spare parts"],"price":199,"price_min":199,"price_max":199,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":22528404521078,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRU-SPP-PTF-TUB-M3S","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Hotend PTFE Tubing for Prusa i3 MK3S","public_title":null,"options":["Default Title"],"price":199,"weight":100,"compare_at_price":null,"inventory_quantity":256,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/prusa-research-parts-hotend-ptfe-tubing-for-prusa-i3-mk3s-1.jpg?v=1579896297","\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/prusa-research-parts-hotend-ptfe-tubing-for-prusa-i3-mk3s-2.jpg?v=1579896300"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/prusa-research-parts-hotend-ptfe-tubing-for-prusa-i3-mk3s-1.jpg?v=1579896297","options":["Title"],"media":[{"alt":null,"id":6013064413302,"position":1,"preview_image":{"aspect_ratio":1.333,"height":459,"width":612,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/prusa-research-parts-hotend-ptfe-tubing-for-prusa-i3-mk3s-1.jpg?v=1579896297"},"aspect_ratio":1.333,"height":459,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/prusa-research-parts-hotend-ptfe-tubing-for-prusa-i3-mk3s-1.jpg?v=1579896297","width":612},{"alt":null,"id":6013064544374,"position":2,"preview_image":{"aspect_ratio":1.333,"height":459,"width":612,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/prusa-research-parts-hotend-ptfe-tubing-for-prusa-i3-mk3s-2.jpg?v=1579896300"},"aspect_ratio":1.333,"height":459,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/prusa-research-parts-hotend-ptfe-tubing-for-prusa-i3-mk3s-2.jpg?v=1579896300","width":612}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003eReplacement hotend PTFE tubing\u003c\/span\u003e for Prusa i3 \u003cstrong\u003eMK3S \/ MK2.5S \/ MMU2S\u003c\/strong\u003e. \u003cspan\u003eThe tube is trimmed and chamfered for a perfect fit with the existing components.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eNot compatible with Prusa i3 MK2 \/ MK2S \/ MK.25 \/ MK3 \/ MMU2, Mk3s+ use \u003ca href=\"\/products\/replacement-hotend-ptfe-tubing-for-prusa-i3\" title=\"Hotend PTFE tube for Prusa i3 MK2 \/ MK2S \/ MK2.5 \/ MK3\" target=\"_blank\"\u003ethis tube\u003c\/a\u003e instead. \u003cstrong\u003eFor the Mk3s+\u003c\/strong\u003e use \u003ca href=\"https:\/\/www.voxelfactory.com\/products\/hotend-ptfe-tubeing-for-the-mk3s-mmu2s?_pos=1\u0026amp;_sid=3aa23f952\u0026amp;_ss=r\"\u003ethis tube\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 44.3mm (tolerance +\/- 0.2 mm)\u003c\/li\u003e\n\u003cli\u003eInner diameter: 1.85 mm\u003c\/li\u003e\n\u003cli\u003eOuter diameter: 4 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/manual.prusa3d.com\/Guide\/How+to+trim+PTFE+tube+-+Original+Prusa+i3+printers\/500?lang=en\" title=\"Technical drawings for PTFE tubes for Prusa i3 3D printers at prusa3d.com\"\u003e\u003cspan\u003eTechnical drawings\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e for the various PTFE tubes used on Prusa i3 3D printers are available on the Prusa Research website.\u003c\/span\u003e\u003c\/p\u003e"}

{"id":4509830512758,"title":"Pro Silicone sock for E3D v6 Hotend (pack of 3)","handle":"pro-silicone-sock-for-e3d-v6-hotend-pack-of-3","description":"\u003cp\u003e\u003cspan\u003eThese socks will keep your nozzle clean and free of burnt on blackened plastic. They don’t just keep the nozzle clean, but also keep heat inside the hotend, and off the print.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMade of a heat-resistant, non-stick silicone material our sock will repel build-up of molten plastic. This really helps with sticky materials like Co-Polyesters and filled materials that like to build up on nozzles.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with \u003ca href=\"\/products\/original-e3d-v6-1-hotend-for-prusa-i3-mk3\" target=\"_blank\" title=\"E3D v6 Hotend for Prusa i3 MK3\/S printer\" rel=\"noopener noreferrer\"\u003eE3D v6 Hotend\u003c\/a\u003e and other hotends using the E3D v6 style heater block.\u003c\/p\u003e\n\u003cp\u003eAlso available in \u003ca href=\"\/products\/silicone-sock-for-e3d-v6-hotend-pack-of-3\" target=\"_blank\" title=\"Silicone sock for E3D v6 Hotend\" rel=\"noopener noreferrer\"\u003eregular version\u003c\/a\u003e, which doesn't cover the nozzle as much.\u003c\/p\u003e","published_at":"2020-05-25T15:37:41-04:00","created_at":"2020-05-22T16:30:34-04:00","vendor":"E3D","type":"Open Parts","tags":["e3d","Hotend","mk2","mk2.5","mk2s","mk3","mk3s"],"price":749,"price_min":749,"price_max":749,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31778922430582,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"E3D-SOK-PRO-0V6-003","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Pro Silicone sock for E3D v6 Hotend (pack of 3)","public_title":null,"options":["Default Title"],"price":749,"weight":100,"compare_at_price":null,"inventory_quantity":113,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-pro-silicone-sock-for-e3d-v6-hotend-pack-of-3-1.jpeg?v=1600348734"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-pro-silicone-sock-for-e3d-v6-hotend-pack-of-3-1.jpeg?v=1600348734","options":["Title"],"media":[{"alt":"Open Parts - Pro Silicone Sock For E3D V6 Hotend (pack Of 3)","id":7036964733046,"position":1,"preview_image":{"aspect_ratio":1.332,"height":533,"width":710,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-pro-silicone-sock-for-e3d-v6-hotend-pack-of-3-1.jpeg?v=1600348734"},"aspect_ratio":1.332,"height":533,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0151\/1735\/products\/open-parts-pro-silicone-sock-for-e3d-v6-hotend-pack-of-3-1.jpeg?v=1600348734","width":710}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003eThese socks will keep your nozzle clean and free of burnt on blackened plastic. They don’t just keep the nozzle clean, but also keep heat inside the hotend, and off the print.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMade of a heat-resistant, non-stick silicone material our sock will repel build-up of molten plastic. This really helps with sticky materials like Co-Polyesters and filled materials that like to build up on nozzles.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with \u003ca href=\"\/products\/original-e3d-v6-1-hotend-for-prusa-i3-mk3\" target=\"_blank\" title=\"E3D v6 Hotend for Prusa i3 MK3\/S printer\" rel=\"noopener noreferrer\"\u003eE3D v6 Hotend\u003c\/a\u003e and other hotends using the E3D v6 style heater block.\u003c\/p\u003e\n\u003cp\u003eAlso available in \u003ca href=\"\/products\/silicone-sock-for-e3d-v6-hotend-pack-of-3\" target=\"_blank\" title=\"Silicone sock for E3D v6 Hotend\" rel=\"noopener noreferrer\"\u003eregular version\u003c\/a\u003e, which doesn't cover the nozzle as much.\u003c\/p\u003e"}